Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Investigation of nanocrystalline zinc chromite obtained by two soft chemical routes

Graphical abstract: - Highlights: • Two soft chemical routes to synthesize zinc chromites are described. • Glycine is used as chelating agent (precursor method) and fuel (solution combustion method). • The synthesized chromites have crystallite size in the range of 18–27 nm. • An antiferromagnetic (AFM) transition is observed at about T{sub N} ∼ 18 K. - Abstract: Zinc chromite (ZnCr{sub 2}O{sub 4}) nanocrystalline powders were obtained by two different chemical routes: the precursor method and the solution combustion method involving glycine-nitrates. The complex compound precursors, [ZnCr{sub 2}(NH{sub 2}CH{sub 2}COO){sub 8}]·9H{sub 2}O and [ZnCr{sub 2}(NH{sub 2}CH{sub 2}COOH){sub 4.5}]·(NO{sub 3}){sub 8}·6H{sub 2}O, were characterized by chemical analysis, infrared spectroscopy (IR), ultraviolet–visible spectroscopy (UV–vis) and thermal analysis. The structure, morphology, surface chemistry and magnetic properties of ZnCr{sub 2}O{sub 4} powders were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), infrared and Raman spectroscopy (RS), ultraviolet–visible spectroscopy (UV–vis) and magnetic measurements. X-ray diffraction patterns indicated the chromite spinel phase with good crystallinity and an average crystallite size of approximately 18–27 nm. The band gap values ranged between 3.31 and 3.33 eV. The magnetic measurements indicated an antiferromagnetic transition at T{sub N} ∼ 17.5/18 K.

36 MATERIALS SCIENCE↗

Relative Role of Particle Size and Shape on the Magnetic and Catalytic Behavior of Nanozinc Chromite

The purpose of this study is to define an effective synthesis for spinel-type zinc chromite (ZnCr{sub 2}O{sub 4}) nanoparticles by a simple microwave combustion method. The synthesized material was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and from optical properties. A magnetic property for the material was examined through the vibrating sample magnetism. The distribution of the external magnetic lines of force and the self-generated magnetic field of ferromagnetic materials was taken into account in the presence of an external magnetic field. Zinc chromite showed good performances in catalytic oxidation, and the role of particle size and shape is highlighted.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dielectric Properties and Oxidation Roasting of Molybdenite Concentrate by Using Microwave Energy at 2.45 GHz Frequency

Conversion of electromagnetic energy into heat depends largely on the dielectric properties of the material being treated. Therefore, determining the dielectric properties of molybdenite concentrate and its microwave power penetration depth in relation to a temperature increment at the commercial frequency of 2.45 GHz is necessary to design industrial microwave processing units. In this study, the dielectric constants increased as the temperature increased in the entire experimental range. The loss factor presented an opposite trend, except for 298 K to 373 K (25 °C to 100 °C) in which a cavity perturbation resonator was used. The plots of nonlinear surface fitting indicate that the increase in dielectric loss causes a considerable decrease in penetration depth, but the dielectric constants exert a small positive effect. The thermogravimetric analysis (TGA-DSC) of the molybdenite concentrate was carried out to track its thermal decomposition process, aim to a dielectric analysis during the microwave heating. MoO{sub 3} was prepared from molybdenite concentrate through oxidation roasting in a microwave heating system and a resistance furnace, respectively. The phase transitions and morphology evolutions during oxidation roasting were characterized through X-ray diffraction and scanning electron microscopy. Results show that microwave thermal technique can produce high-purity molybdenum trioxide.

36 MATERIALS SCIENCE↗

Study on the hydration and microstructure of Portland cement containing diethanol-isopropanolamine

Diethanol-isopropanolamine (DEIPA) is a tertiary alkanolamine used in the formulation of cement grinding-aid additives and concrete early-strength agents. In this research, isothermal calorimetry was used to study the hydration kinetics of Portland cement with DEIPA. A combination of X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC)–thermogravimetric (TG) analysis and micro-Raman spectroscopy was used to investigate the phase development in the process of hydration. Mercury intrusion porosimetry was used to study the pore size distribution and porosity. The results indicate that DEIPA promotes the formation of ettringite (AFt) and enhances the second hydration rate of the aluminate and ferrite phases, the transformation of AFt into monosulfoaluminate (AFm) and the formation of microcrystalline portlandite (CH) at early stages. At later stages, DEIPA accelerates the hydration of alite and reduces the pore size and porosity.

36 MATERIALS SCIENCE↗

Characterisation of magnesium potassium phosphate cements blended with fly ash and ground granulated blast furnace slag

Magnesium potassium phosphate cements (MKPCs), blended with 50 wt.% fly ash (FA) or ground granulated blast furnace slag (GBFS) to reduce heat evolution, water demand and cost, were assessed using compressive strength, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nuclear magnetic resonance (NMR) spectroscopy on {sup 25}Mg, {sup 27}Al, {sup 29}Si, {sup 31}P and {sup 39}K nuclei. We present the first definitive evidence that dissolution of the glassy aluminosilicate phases of both FA and GBFS occurred under the pH conditions of MKPC. In addition to the main binder phase, struvite-K, an amorphous orthophosphate phase was detected in FA/MKPC and GBFS/MKPC systems. It was postulated that an aluminium phosphate phase was formed, however, no significant Al–O–P interactions were identified. High-field NMR analysis of the GBFS/MKPC system indicated the potential formation of a potassium-aluminosilicate phase. This study demonstrates the need for further research on these binders, as both FA and GBFS are generally regarded as inert fillers within MKPC.

36 MATERIALS SCIENCE↗

Sulfate performance of blended cements (limestone and illite calcined clay) exposed to aggressive environment after casting

This paper evaluates how early aggressive exposure affects the sulfate resistance of blended cements containing limestone filler and/or calcined clay. Mortar and cement paste specimens were elaborated with different combinations of limestone filler and two different illitic calcined clays and exposed to a sodium sulfate solution shortly after casting. Assessment of sulfate resistance was based on expansion, mass variation, and compressive strength. Microscale evolution and distribution were examined by mercury intrusion porosimetry, X-ray diffraction, and scanning electron microscopy with energy-dispersive spectrometry measurements. Results prove superior sulfate resistance of compositions with high calcined clay content over limestone filler addition. Furthermore, the results reported suggest that the pozzolanic reaction progresses enough to reduce the sulfate ingress even at early exposure conditions. Therefore, calcined clay replacement can still provide effective pore refinement to limit sulfate penetration, increase strength, and reduce available CH to limit expansive phase formation.

36 MATERIALS SCIENCE↗

Incorporation effect of nanosized perovskite LaFe₀.₇Co₀.₃O₃ on the electrochemical activity of Pt nanoparticles-multi walled carbon nanotube composite toward methanol oxidation

Nanosized perovskite LaFe₀.₇Co₀.₃O₃ (LFCO) is synthesized through conventional co-precipitation method and characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) techniques. The incorporation effect of the mentioned perovskite to catalytic activity of the PtNPs-MWCNTs-nafion (or -chitosan) catalyst toward methanol oxidation has been studied by cyclic voltammetry. Based on the electrochemical studies, all MWCNTs-PtNPs-nafion (or chitosan) and MWCNTs-PtNPs-LFCO-nafion (or chitosan) catalysts show a considerable activity for methanol oxidation. However, a synergistic effect is observed when LFCO is added to the catalyst by decreasing the poisoning rate of the Pt catalyst. - Graphical abstract: Nanosized perovskite LaFe₀.₇Co₀.₃O₃ is synthesized and characterized. The incorporation effect of the mentioned perovskite to catalytic activity of the PtNPS-MWCNTs-nafion (or -chitosan) catalyst toward methanol oxidation is studied. Highlights: • Nanocrystalline LaFe₀.₇Co₀.₃O₃ (LFCO) is prepared by a new simple co-precipitation method. • Effect of LFCO to catalytic activity of PtNPS for methanol oxidation is studied. • A synergistic effect is observed when LFCO is added to the Pt catalyst. • Oxygen of LFCO could be considered as active oxygen to remove CO intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic study on the influence of the morphology of α-MoO{sub 3} in the selective oxidation of propylene

A variety of morphologically different α-MoO{sub 3} samples were prepared by hydrothermal synthesis and applied in the selective oxidation of propylene. Their catalytic performance was compared to α-MoO{sub 3} prepared by flame spray pyrolysis (FSP) and a classical synthesis route. Hydrothermal synthesis from ammonium heptamolybdate (AHM) and nitric acid at pH 1–2 led to ammonium containing molybdenum oxide phases that were completely transformed into α-MoO{sub 3} after calcination at 550 °C. A one-step synthesis of α-MoO{sub 3} rods was possible starting from MoO{sub 3}·2H{sub 2}O with acetic acid or nitric acid and from AHM with nitric acid at 180 °C. Particularly, if nitric acid was used during synthesis, the rod-like morphology of the samples could be stabilized during calcination at 550 °C and the following catalytic activity tests, which was beneficial for the catalytic performance in propylene oxidation. Characterization studies using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy showed that those samples, which retained their rod-like morphology during the activity tests, yielded the highest propylene conversion. - Graphical abstract: Hydrothermal synthesis from MoO{sub 3}·2H{sub 2}O in the presence of HNO{sub 3} led to rod-shaped particles which mainly expose (1 0 0) facets which are the most active surfaces. - Highlights: • Hydrothermal synthesis of MoO3 resulted in either rod or slab shaped particles depending on pH. • At pH<0 rods stable towards calcination and catalytic activity testing were formed. • Rod shaped particles had significantly higher activity than slab shaped ones. • The rod shaped particles mainly expose the (1 0 0) facets which are the most active surfaces. • Total surface area is not main determining factor for catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication and characterization of tetrapod-like ZnO nanostructures prepared by catalyst-free thermal evaporation

Tetrapod-like ZnO nanostructures were fabricated on ZnO-coated sapphire (001) substrates by two steps: pulsed laser deposition (PLD) and catalyst-free thermal evaporation process. First, the ZnO films were pre-deposited on sapphire (001) substrates by PLD. Then the ZnO nanostructures grew on ZnO-coated sapphire (001) substrate by the simple thermal evaporation of the metallic zinc powder at 900 deg. C in the air without any catalysts. The pre-deposited ZnO films by PLD on the substrates can provide growing sites for the ZnO nanostructures. The as-synthesized ZnO nanostructures were characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and Fourier transform infrared spectrum (FTIR). The results show that the tetrapod-like ZnO nanostructures are highly crystalline with the wurtzite hexagonal structure. Photoluminescence (PL) spectrum of as-synthesized nanostructures exhibits a UV emission peak at {approx} 389 nm and a broad green emission peak at {approx} 513 nm. In addition, the growth mechanism of ZnO nanostructures is also briefly discussed.

36 MATERIALS SCIENCE↗

Improvement of adhesion and barrier properties of biomedical stainless steel by deposition of YSZ coatings using RF magnetron sputtering

The AISI 316L stainless steel (SS) has been widely used in both artificial knee and hip joints in biomedical applications. In the present study, yttria stabilized zirconia (YSZ, ZrO{sub 2} + 8% Y{sub 2}O{sub 3}) films were deposited on AISI 316L SS by radio-frequency magnetron sputtering using different power densities (50–250 W) and deposition times (30–120 min) from a YSZ target. The crystallographic orientation and surface morphology were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The effects of the surface modification on the corrosion performance of AISI 316L SS were evaluated in phosphate buffered saline (PBS) solution using an electrochemical test on both the virgin and coated samples. The YSZ coatings have a (111) preferred orientation during crystal growth along the c-axis for short deposition times (30–60 min), whereas a polycrystalline structure forms during deposition times from 90 to 120 min. The corrosion protective character of the YSZ coatings depends on the crystal size and film thickness. A significant increase in adhesion and corrosion resistance by at least a factor of 46 and a higher breakdown potential were obtained for the deposited coatings at 200 W (120 min). - Highlights: • Well-formed and protective YSZ coatings were achieved on AISI 316L SS substrates. • Films grown at high power and long deposition time have polycrystalline structures. • The crystal size varies from ∼ 5 to 30 nm as both power and deposition time increased. • The differences of corrosion resistance are attributed to internal film structure.

36 MATERIALS SCIENCE↗

Synthesis, characterization and magnetic properties of NiS{sub 1+x} nanocrystals from [bis(salicylidene)nickel(II)] as new precursor

[Bis(salicylidene)nickel(II)] was used as a precursor to prepare nickel sulfides nanoparticles of average size 20 nm by a chemical process in oleylamine. The products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-vis) and photoluminescence (PL) spectroscopy. Magnetization measurement indicates that both of the {alpha}-NiS and Ni{sub 3}S{sub 4} nanoparticles show pramagnetism due to the size effect.

36 MATERIALS SCIENCE↗

The synthesis and optical property of solid-state-prepared YAG:Ce phosphor by a spray-drying method

Ce{sup 3+}-activated yttrium aluminum garnet (Y{sub 3}Al{sub 5}O{sub 12}:Ce, YAG:Ce) powder as luminescent phosphor was synthesized by the solid-state reaction method. The phase identification, microstructure and photoluminescent properties of the products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), absorption spectrum and photoluminescence (PL) analysis. Spherical phosphor particle is considered better than irregular-shaped particle to improve PL property and application, so this phosphor was granulated into a sphere-like shape by a spray-drying device. After calcinating at 1500 deg. C for 0, 4, and 8 h, the product was identified as YAG and CeO{sub 2} phases. The CeO{sub 2} phase content is decreased by increasing the calcination time or decreasing the Ce{sup 3+} doping content. The product showed higher emission intensity resulted from more Ce{sup 3+} content and larger grain size. The product with CeO{sub 2} was found to have lower emission intensity. This paper presents the crystal structures of Rietveld refinement results of powder XRD data.

36 MATERIALS SCIENCE↗

Preparation and microwave characterization of BaNd{sub 2-x}Sm{sub x}Ti{sub 4}O{sub 12} (0 {<=} x {<=} 2) ceramics and their effect on the temperature coefficient of dielectric constant in polytetrafluoroethylene composites

High dielectric and temperature-stable ceramic compositions have been prepared through solid-state ceramic route. The structure and microstructure of the ceramics have been studied using powder X-ray diffraction and scanning electron microscopic techniques. The dielectric properties of well-sintered ceramics are studied in the microwave frequency region using Hakki and Coleman post-resonator technique. The samples exhibited high dielectric constant (>77), relatively high quality factor (>1500) and near zero temperature coefficient of resonant frequency. Phase pure calcined ceramic materials are incorporated in the polytetrafluoroethylene matrix through a proprietary process comprising of sigma mixing, extrusion, calendering followed by hot pressing for the fabrication of planar circuit laminates. The effect of temperature coefficient of dielectric constant of the resultant polytetrafluoroethylene/ceramic composite materials is studied with respect to compositional variation of the filler materials.

36 MATERIALS SCIENCE↗

Synthesis and characterization of different nanostructures of cobalt phosphate

In this research, different nanostructures of cobalt phosphate were successfully prepared. Flowerlike cobalt phosphate and platelike ammonium cobalt phosphate were made by coprecipitation method without any use of surfactant or capping agent as structure directors. Reverse micelle route in water/CTAB/n-hexanol microemulsion system was used to synthesize cobalt phosphate nanoparticles. The synthesized nanostructures were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), chemical analysis, and BET. The SEM images showed that the flowerlike nanostructure is an arrangement of cobalt phosphate plates. TEM images revealed that the nanoparticles are spherical with the diameter of 30-50 nm. The purity of cobalt phosphate nanoparticles was confirmed by chemical analysis. Finally, the possible mechanisms which can describe the formation of these nanostructures were discussed.

36 MATERIALS SCIENCE↗

Cd–cysteine precursor nanowire templated microwave-assisted transformation route to CdS nanotubes

Graphical abstract: Cadmium sulfide polycrystalline nanotubes have been successfully synthesized by microwave-assisted transformation method using Cd–cysteine precursor nanowires as the source material and template in ethylene glycol at 160 °C or ethanol at 60 °C. Display Omitted Highlights: ► Cd–cysteine precursor nanowires were successfully synthesized in alkaline solution. ► CdS nanotubes were prepared by templated microwave-assisted transformation method. ► CdS nanotubes can well duplicate the size and morphology of precursor nanowires. ► This method has the advantages of the simplicity and low cost. -- Abstract: We report the Cd–cysteine precursor nanowire templated microwave-assisted transformation route to CdS nanotubes. In this method, the Cd–cysteine precursor nanowires are synthesized using CdCl{sub 2}·2.5H{sub 2}O, L-cysteine and ethanolamine in water at room temperature. The Cd–cysteine precursor nanowires are used as the source material and template for the subsequent preparation of CdS nanotubes by a microwave-assisted transformation method using ethylene glycol or ethanol as the solvent. This method has the advantages of the simplicity and low cost, and may be extended to the synthesis of nanotubes of other compounds. The products are characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM).

36 MATERIALS SCIENCE↗

Photoluminescence properties of AlN-doped BaMgAl{sub 10}O{sub 17}:Eu{sup 2+} phosphors

Highlights: ► Ideal hexagonal shape particle size in 5 μm and 2.5–3 μm in thickness are obtained. ► The growth mechanism is studied by a computer simulation. ► The influence of introduced AlN on the sites of Eu{sup 2+} and photoluminescence properties was investigated. - Abstract: The AlN-doped BaMgAl{sub 10}O{sub 17}:Eu{sup 2+} phosphors were synthesized by conventional solid-state reaction. Powder X-ray diffraction (XRD), scanning electron microscope (SEM) and photoluminescence spectrum (PL) were used for characterization. The growth mechanism was carried out by computer simulation with CASTEP application, and revealed that an ideal hexagonal shape, particle size in 5 μm and 2.5–3 μm in thickness, could be obtained by AlN doping. Additionally, due to the low electronegativity of N{sup 3−}, the AlN-doped sample showed 35% increase in PL intensity and improvement of thermal stability. These fine particle size and better photoluminescence properties are expected to be applicable to industrial production of BaMgAl{sub 10}O{sub 17}:Eu{sup 2+} phosphors.

36 MATERIALS SCIENCE↗

Structural evolution, sintering behavior and microwave dielectric properties of (1−x)Li{sub 2}TiO{sub 3} + xLiF ceramics

Graphical abstract: - Highlights: • Structure, sinterability and dielectric properties of LiF-doped Li{sub 2}TiO{sub 3} were studied. • Li{sub 2}TiO{sub 3} can be densitied (TD 98%) at lower sintering temperature by LiF additions. • Excellent microwave dielectric properties could be obtained. - Abstract: Structural evolution, sintering behavior, and microwave dielectric properties of (1−x)Li{sub 2}TiO{sub 3} + xLiF (0.05 ≤ x ≤ 0.70) ceramics have been studied by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Raman spectra, thermal dilatometry and microwave resonant measurement at the frequency of about 7–11 GHz. The results show that Li{sub 2}TiO{sub 3} can form limited solid solution with LiF (x ≤ 0.4) and LiF second phase appeared when x{sup 3}0.5. The structure of the solid solution transformed from ordered monoclinic phase (β-Li{sub 2}TiO{sub 3} (ss)) to disordered cubic rock salt (α-Li{sub 2}TiO{sub 3} (ss)) when x{sup 3}0.15. The presence of short range ordering was confirmed for the cubic phase. The sinterability was considerably improved by doping with LiF. Densified ceramics with about 95–98% theoretical density could be obtained for the doped compositions after sintering at 900–1150 °C/2 h. An optimized microwave dielectric properties with ε{sub r} of ∼23.6, Q × f of ∼108,000 GHz and τ{sub f} of ∼4.2 ppm/°C could be obtained for the x = 0.1 composition after sintering at 1100 °C/2 h.

36 MATERIALS SCIENCE↗

Synthesis and photocatalytic property of BiOBr/palygorskite composites

Graphical abstract: - Highlights: • BiOBr/palygorskite composite photocatalysts were prepared for the first time. • The synchronous role of adsorbability and photocatalytic oxidation was studied. • BiOBr/palygorskite composite exhibit enhanced photocatalytic activities. • The optimal ratio of [Bi]/palygorskite was identified. - Abstract: BiOBr/palygorskite composite photocatalysts were prepared by a hydrothermal method for the first time, which were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transformed infrared spectroscopy (FTIR), N{sub 2}-sorption and UV–vis diffuse reflectance spectroscopy. The photocatalytic activity of the as-prepared samples was evaluated by decomposition of methyl orange (MO) under visible light irradiation. The results revealed that BiOBr/palygorskite composites had strong photoabsorption in the visible light region. All BiOBr/palygorskite composites possessed higher photocatalytic activity than pure BiOBr. The highest activity was obtained by S5.0 sample. The enhanced photocatalytic performance was attributed to strong photoabsorption, the synchronous role of adsorbability and photocatalytic oxidation on BiOBr/palygorskite composites and the efficient separation of photogenerated electron–hole pairs.

36 MATERIALS SCIENCE↗