Search NASA⌕ Search

SEARCH · Search NASA

Results for “selenium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Comparison of crystal growth and thermoelectric properties of n-type Bi-Se-Te and p-type Bi-Sb-Te nanocrystalline thin films: Effects of homogeneous irradiation with an electron beam

The effects of homogenous electron beam (EB) irradiation on the crystal growth and thermoelectric properties of n-type Bi-Se-Te and p-type Bi-Sb-Te thin films were investigated. Both types of thin films were prepared by flash evaporation, after which homogeneous EB irradiation was performed at an acceleration voltage of 0.17 MeV. For the n-type thin films, nanodots with a diameter of less than 10 nm were observed on the surface of rice-like nanostructures, and crystallization and crystal orientation were improved by EB irradiation. The resulting enhancement of mobility led to increased electrical conductivity and thermoelectric power factor for the n-type thin films. In contrast, the crystallization and crystal orientation of the p-type thin films were not influenced by EB irradiation. The carrier concentration increased and mobility decreased with increased EB irradiation dose, possibly because of the generation of defects. As a result, the thermoelectric power factor of p-type thin films was not improved by EB irradiation. The different crystallization behavior of the n-type and p-type thin films is attributed to atomic rearrangement during EB irradiation. Selenium in the n-type thin films is more likely to undergo atomic rearrangement than the other atoms present, so only the crystallinity of the n-type Bi-Se-Te thin films was enhanced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selenization of Sb{sub 2}Se{sub 3} absorber layer: An efficient step to improve device performance of CdS/Sb{sub 2}Se{sub 3} solar cells

Sb{sub 2}Se{sub 3} appeared as a very promising solar absorber because of their attractive material, optical and electrical properties. Previously, we reported thermal evaporated superstrate CdS/Sb{sub 2}Se{sub 3} solar cell achieving 1.9% efficiency. In this letter, we improved device performance to 3.7% (Voc = 0.335 V, Jsc = 24.4 mA/cm{sup 2}, and FF = 46.8%) by an additional selenization step. Careful external quantum efficiency, capacitance-voltage profiling, and photoresponse study indicated selenization probably compensated selenium loss during thermal evaporation, reducing V{sub Se} associated recombination loss and improving device performance.

36 MATERIALS SCIENCE↗

Thermochemically evolved nanoplatelets of bismuth selenide with enhanced thermoelectric figure of merit

We firstly present a simple thermochemical method to fabricate high-quality Bi{sub 2}Se{sub 3} nanoplatelets with enhanced figure of merit using elemental bismuth and selenium powders as precursors. The crystal structure of as synthesized products is characterized via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and high resolution transmission electron microscopy (HRTEM) measurements. Morphological and chemical synthetic parameters are investigated through a series of experiments; thickness and composition of the platelets are well controlled in large scale production. Subsequently spark plasma sintering (SPS) is performed to fabricate n-type nanostructured bulk thermoelectric materials. Raman Spectroscopy of the two selected samples with approximately of 50 and 100 nm thicknesses shows three vibrational modes. The lower thickness sample exhibits the maximum red shift of about 2.17 cm{sup -1} and maximum broadening of about 10 cm{sup -1} by in-plane vibrational mode E{sup 2}{sub g}. The enhanced value of figure of merit ∼0.41 is obtained for pure phase bismuth selenide to the best of our knowledge. We observe metallic conduction behavior while semiconducting behavior for nanostructured bismuth selenide is reported elsewhere which could be due to different synthetic techniques adopted. These results clearly suggest that our adopted synthetic technique has profound effect on the electronic and thermoelectric transport properties of this material.

36 MATERIALS SCIENCE↗

Photo-crystallization in a-Se layer structures: Effects of film-substrate interface-rigidity

Amorphous selenium (a-Se) films deposited on rigid substrates can undergo photo-induced crystallization (PC) even at temperatures (T) well below the glass transition, T{sub g} ∼ 313 K. Substrate-generated shear strain is known to promote the PC process. In the present work, we explore the influence of different substrates (Si and glass), and different film-layer-substrate combinations, on the PC in a variety of a-Se films and film-structures. The intermediate layers (indium tin oxide and polyimide) are chosen to promote conductivity and/or to be a buffer against interface strain in structures of interest for digital imaging applications. The PC characteristics in these samples are evaluated and compared using optical microscopy, atomic-force microscopy, Raman mapping, and T-dependent Raman spectroscopy. Both the presence of a soft intermediate layer, and the thermal softening that occurs for T increasing through T{sub g}, inhibit the tendency for the onset of PC. The extensive PC mapping results in the wide range of samples studied here, as well as the suppression of PC near T{sub g} in this array of samples, strongly support the generality of this behavior. As a consequence, one may expect that the stability of a-Se films against PC can be enhanced by decreasing the rigidity of the film-substrate interface. In this regard, advanced film structures that employ flexible substrates, soft intermediate layers, and/or are designed to be operated near T{sub g} should be explored.

36 MATERIALS SCIENCE↗

Structural transformation between long and short-chain form of liquid sulfur from ab initio molecular dynamics

We present results of ab initio molecular dynamics study of the structural transformation occurring in hot liquid sulfur under high pressure, which corresponds to the recently observed chain-breakage phenomenon and to the electronic transition reported earlier. The transformation is temperature-induced and separates two distinct polymeric forms of liquid sulfur: high-temperature form composed of short chain-like fragments with open endings and low-temperature form with very long chains. We offer a structural description of the two liquid forms in terms of chain lengths, cross-linking, and chain geometry and investigate several physical properties. We conclude that the transformation is accompanied by changes in energy (but not density) as well as in diffusion coefficient and electronic properties—semiconductor-metal transition. We also describe the analogy of the investigated process to similar phenomena that take place in two other chalcogens selenium and tellurium. Finally, we remark that the behavior of heated liquid sulfur at ambient pressure might indicate a possible existence of a critical point in the low-pressure region of sulfur phase diagram.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetic effects of Cd{sub 1-x}In{sub x}Cr{sub 2}Se{sub 4}

Polycrystalline CdCr{sub 2}Se{sub 4} spinels with non-magnetic indium substitution were investigated with an aim to study the influence of non-magnetic substitution at the Cd site on its structural and magnetic properties. We carried out powder XRD and magnetic measurements on three compositions: Cd{sub 1-x}In{sub x}Cr{sub 2}Se{sub 4} (x=0, 0.05, 0.1). The XRD patterns were analyzed by carrying out Rietveld analysis and structural parameters were estimated. Phase purity of the compounds using reitveld refinement technique where confirming the indium distribution at tetrahedral site of the cubic close-packed sublattice formed by the selenium ions. The chemical compositions of these compounds were determined by energy dispersive x-ray analysis. Compared to parent compound, CdCr{sub 2}Se{sub 4}, the ferromagnetic Curie temperature T{sub C} was found to decrease from 130K to 123K and 114K as x varied from 0 to 0.05 and 0.1 respectively, whereas the saturation magnetization increases in Cd{sub 0.95}In{sub 0.05}Cr{sub 2}Se{sub 4} and again decreases in Cd{sub 0.9}In{sub 0.1}Cr{sub 2}Se{sub 4}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band gap and refractive index tunability in thallium based layered mixed crystals

Compositional variation of the band gap energy and refractive index of TlMeX{sub 2}-type (Me = Ga or In and X = S or Se) layered mixed crystals have been studied by the transmission and reflection measurements in the wavelength range of 400–1100 nm. The analysis of absorption data of TlGa{sub 1-x}In{sub x}Se{sub 2}, TlGa(S{sub 1−x}Se{sub x}){sub 2}, TlGa{sub 1−x}In{sub x}S{sub 2}, and TlIn(Se{sub 1−x}S{sub x}){sub 2} mixed crystals revealed the presence of both optical indirect and direct transitions. It was found that the energy band gaps of mixed crystals decrease at the replacing of gallium atoms by indium and of sulfur atoms by selenium ones. Through the similar replacing of atoms (smaller atoms by larger ones) in the studied mixed crystals, the refractive index shows the quite opposite behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optically enhanced SnO{sub 2}/CdSe core/shell nanostructures grown by sol-gel spin coating method

Synthesis of SnO{sub 2}/CdSe metal oxide/ chalcogenide nanostructures on glass micro slides using ultrasonic sol-gel process followed by spin coating has been reported. Stannous chloride, cadmium chloride and selenium dioxide compounds were used for Sn, Cd and Se precursors respectively. Ethylene glycol was used as complexing agent. The samples were characterized by XRD, SEM, AFM and UV-spectrophotometer. All the peaks shown in diffractograms are identified for SnO{sub 2}. Peak broadening observed in core shell due to stress behavior of CdSe lattice. Scanning electron microscope and AFM exhibits the conversion of cluster in to nanorods structures forms. Atomic force microscope shows the structures in nanorods form and a roughness reduced 1.5194 nm by the deposition of CdSe. Uv Visible spectra shows a new absorption edge in the visible region make them useful for optoelectronic applications.

36 MATERIALS SCIENCE↗

Possible atomic structures responsible for the sub-bandgap absorption of chalcogen-hyperdoped silicon

Single-crystal silicon was hyperdoped with sulfur, selenium, and tellurium using ion implantation and nanosecond laser melting. The hyperdoping of such chalcogen elements led to strong and wide sub-bandgap light absorption. Annealing the hyperdoped silicon, even at low temperatures (such as 200–400 °C), led to attenuation of the sub-bandgap absorption. To explain the attenuation process, we modeled it as chemical decomposition reaction from an optically absorbing structure to a non-absorbing structure. Attenuation of the experimental absorption coefficient was fit using the Arrhenius equation. From the fitted data, we extracted the reaction activation energies of S-, Se-, and T-hyperdoped silicon as 0.338 ± 0.029 eV, 0.471 ± 0.040 eV, and 0.357 ± 0.028 eV, respectively. We discuss these activation energies in terms of the bond energies of chalcogen–Si metastable bonds, and suggest that several high-energy interstitial sites, rather than substitutional sites, are candidates for the atomic structures that are responsible for the strong sub-bandgap absorption of chalcogen hyperdoped silicon.

36 MATERIALS SCIENCE↗

A photoluminescence study of excitonic grade CuInSe{sub 2} single crystals irradiated with 6 MeV electrons

High-quality single crystals of CuInSe{sub 2} with near-stoichiometric elemental compositions were irradiated with 6 MeV electrons, at doses from 10{sup 15} to 3 × 10{sup 18 }cm{sup −2}, and studied using photoluminescence (PL) at temperatures from 4.2 to 300 K. Before irradiation, the photoluminescence spectra reveal a number of sharp and well resolved lines associated with free- and bound-excitons. The spectra also show broader bands relating to free-to-bound transitions and their phonon replicas in the lower energy region below 1.0 eV. The irradiation with 6 MeV electrons reduces the intensity of the free- and the majority of the bound-exciton peaks. Such a reduction can be seen for doses above 10{sup 16 }cm{sup −2}. The irradiation induces new PL lines at 1.0215 eV and 0.9909 eV and also enhances the intensity of the lines at 1.0325 and 1.0102 eV present in the photoluminescence spectra before the irradiation. Two broad bands at 0.902 and 0.972 eV, respectively, are tentatively associated with two acceptor-type defects: namely, interstitial selenium (Se{sub i}) and copper on indium site (Cu{sub In}). After irradiation, these become more intense suggesting an increase in the concentration of these defects due to irradiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preparation of Cu{sub 2}ZnSnSe{sub 4} solar cells by low-temperature co-evaporation and following selenization

Cu{sub 2}ZnSnSe{sub 4} (CZTSe) thin films are prepared by a two-step method which involves co-evaporation of Cu, Zn, Sn, and Se on molybdenum-coated soda-lime glass at low substrate temperature and a following selenization. Solar cells with efficiencies of up to 6.5% can be achieved. The influence of the selenium deposition rates during co-evaporation and the nitrogen pressure during selenization on the properties of the CZTSe films are investigated. It is found that these two parameters can significantly affect the morphology and crystallinity of the CZTSe films. The possible reasons for the experimental results are discussed.

36 MATERIALS SCIENCE↗

Influence of Te and Se doping on ZnO films growth by SILAR method

The AIP Successive ionic layer adsorption and reaction (SILAR) is an economic and simple method to growth thin films. In this study, SILAR method is used to growth Selenium (Se) and Tellurium (Te) doped zinc oxide (ZnO) thin films with different doping rates. For characterization of the films X-ray diffraction (XRD), absorbance and scanning electron microscopy (SEM) are used. XRD results are showed well-defined strongly (002) oriented crystal structure for all samples. Also, absorbance measurements show, Te and Se concentration are proportional and inversely proportional with band gap energy, respectively. SEM measurements show that the surface morphology and thickness of the material varied with Se and/or Te and varying concentrations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Luminescence study of ZnSe/PVA (polyvinyl alcohol) composite film

The ZnSe nanocrystals have been prepared into poly vinyl alcohol(PVA) polymer matrix on glass using ZnCl2 and Na2SeSO3 as zinc and selenium source respectively. Poly vinyl Alcohol (PVA) used as polymer matrix cum capping agent due to their high viscosity and water solubility. It is transparent for visible region and prevents Se- ions to photo oxidation. The ZnSe/PVA composite film was deposited on glass substrate. The film was characterized by X Ray Diffraction (XRD) and UV-Visible absorption Spectroscopy and Photoluminescence. The X Ray Diffraction (XRD) study confirms the nanometer size (10 nm) particle formation within PVA matrix with cubic zinc blend crystal structure. The UV-Visible Absorption spectrum of ZnSe/PVA composite film shown blue shift in absorption edge indicating increased band gap due to quantum confinement. The calculated energy band gap from the absorption edge using Tauc relation is 3.4 eV. From the Photoluminescence study a broad peak at 435 nm has been observed in violet blue region due to recombination of surface states.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Doping mechanism in pure CuInSe{sub 2}

We investigate the dopant concentration and majority carrier mobility in epitaxial CuInSe{sub 2} thin films for different copper-to-indium ratios and selenium excess during growth. We find that all copper-poor samples are n-type, and that hopping conduction in a shallow donor state plays a significant role for carrier transport. Annealing in sodium ambient enhances gallium in-diffusion from the substrate wafer and changes the net doping of the previously n-type samples to p-type. We suggest that sodium incorporation from the glass might be responsible for the observed p-type doping in polycrystalline Cu-poor CuInSe{sub 2} solar cell absorbers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism and magnetocrystalline anisotropy in single-layer PtSe{sub 2}: Interplay between strain and vacancy

The electronic and magnetic properties of the newly synthesized single-layer (1 L) transition-metal dichalcogenide (TMD) PtSe{sub 2} are studied by first-principles calculations. We find the strain or selenium vacancy (V{sub Se}) alone cannot induce the magnetism. However, an interplay between strain and V{sub Se} leads to the magnetism due to the breaking of Pt-Pt metallic bonds. Different from the case of 1 L-MoS{sub 2} with V{sub S}, the defective 1 L-PtSe{sub 2} has the spatially extended spin density, which is responsible for the obtained long range ferromagnetic coupling. Moreover, the 1 L-PtSe{sub 2} with V{sub Se} undergoes a spin reorientation transition from out-of-plane to in-plane magnetization, accompanying a maximum magnetocrystalline anisotropy energy of ∼9–10.6 meV/V{sub Se}. These results indicate the strain not only can effectively tune the magnetism but also can manipulate the magnetization direction of 1 L-TMDs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Local Structure of the Superconductor K0.8Fe1.6+xSe2: Evidence of Large Structural Disorder

The local structure of superconducting single crystals of K{sub 0.8}Fe{sub 1.6+x}Se{sub 2} with Tc = 32.6 K was studied by x-ray absorption spectroscopy. Near-edge spectra reveal that the average valence of Fe is 2+. The room temperature structure about the Fe, K, and Se sites was examined by iron, selenium, and potassium K-edge measurements. The structure about the Se and Fe sites shows a high degree of order in the nearest-neighbor Fe-Se bonds. On the other hand, the combined Se and K local structure measurements reveal a very high level of structural disorder in the K layers. Temperature-dependent measurements at the Fe sites show that the Fe-Se atomic correlation follows that of the Fe-As correlation in the superconductor LaFeAsO{sub 0.89}F{sub 0.11}, having the same effective Einstein temperature (stiffness). In K{sub 0.8}Fe{sub 1.6+x}Se{sub 2}, the nearest-neighbor Fe-Fe bonds have a lower Einstein temperature and higher structural disorder than in LaFeAsO{sub 0.89}F{sub 0.11}. The moderate Fe site and high K site structural disorder is consistent with the high normal state resistivity seen in this class of materials. For higher shells, an enhancement of the second-nearest-neighbor Fe-Fe correlation is found just below Tc, possibly due to changes in magnetic or local structural ordering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Techniques and tactics used in determining the structure of the trimeric ebolavirus glycoprotein

Here, the techniques, tactics and strategies used to overcome a series of technical roadblocks in crystallization and phasing of the trimeric ebolavirus glycoprotein are described. The trimeric membrane-anchored ebolavirus envelope glycoprotein (GP) is responsible for viral attachment, fusion and entry. Knowledge of its structure is important both for understanding ebolavirus entry and for the development of medical interventions. Crystal structures of viral glycoproteins, especially those in their metastable prefusion oligomeric states, can be difficult to achieve given the challenges in production, purification, crystallization and diffraction that are inherent in the heavily glycosylated flexible nature of these types of proteins. The crystal structure of ebolavirus GP in its trimeric prefusion conformation in complex with a human antibody derived from a survivor of the 1995 Kikwit outbreak has now been determined [Lee et al. (2008 ▶), Nature (London), 454, 177–182]. Here, the techniques, tactics and strategies used to overcome a series of technical roadblocks in crystallization and phasing are described. Glycoproteins were produced in human embryonic kidney 293T cells, which allowed rapid screening of constructs and expression of protein in milligram quantities. Complexes of GP with an antibody fragment (Fab) promoted crystallization and a series of deglycosylation strategies, including sugar mutants, enzymatic deglycosylation, insect-cell expression and glycan anabolic pathway inhibitors, were attempted to improve the weakly diffracting glycoprotein crystals. The signal-to-noise ratio of the search model for molecular replacement was improved by determining the structure of the uncomplexed Fab. Phase combination with Fab model phases and a selenium anomalous signal, followed by NCS-averaged density modification, resulted in a clear interpretable electron-density map. Model building was assisted by the use of B-value-sharpened electron-density maps and the proper sequence register was confirmed by building alternate sequences using N-linked glycan sites as anchors and secondary-structural predictions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗