Search NASA⌕ Search

SEARCH · Search NASA

Results for “separability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Development of the Actinide-Lanthanide Separation (ALSEP) Process

Separating the minor actinide elements (Am and Cm) from acidic high-level raffinates arising from the reprocessing of irradiated nuclear fuel is an important step in closing the nuclear fuel cycle. Most proposed approaches to this problem involve two solvent extraction steps: 1) co-extraction of the trivalent lanthanides and actinides, followed by 2) separation of the actinides from the lanthanides. The objective of our work is to develop a single solvent-extraction process for isolating the minor actinide elements. We report here a solvent containing N,N,N',N'-tetra(2 ethylhexyl)diglycolamide (T2EHDGA) combined with 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) that can be used to separate the minor actinides in a single solvent-extraction process. T2EHDGA serves to co-extract the trivalent actinide and lanthanide ions from nitric acid solution. Switching the aqueous phase chemistry to a citrate buffered solution of N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid at pH 2.5 to 4 results in selective transfer of the actinides to the aqueous phase, thus affecting separation of the actinides from the lanthanides. Separation factors between the lanthanides and actinides are approximately 20 in the pH range of 3 to 4, and the distribution ratios are not highly dependent on the pH in this system.

actinide separation↗

Tailorable Multi–Modular Pore–Space–Partitioned Vanadium Metal–Organic Frameworks for Gas Separation

Currently, few porous vanadium metal-organic frameworks (V-MOFs) are known and even fewer are obtainable as single crystals, resulting in limited information on their structures and properties. Here this work demonstrates remarkable promise of V-MOFs by presenting an extensible family of V-MOFs with tailorable pore geometry and properties. The synthesis leverages inter-modular synergy on a tri-modular pore-partitioned platform. New V-MOFs show a broad range of structural features and sorption properties suitable for gas storage and separation applications for C 2 H 2 /CO 2 , C 2 H 6 /C 2 H 4 , and C 3 H 8 /C 3 H 6 . The c/a ratio of the hexagonal cell, a measure of pore shape, is tunable from 0.612 to 1.258. Other tunable properties include pore size from 5.0 to 10.9 Å and surface area from 820 to 2964 m 2 g –1 . With C 2 H 2 /CO 2 selectivity from 3.3 to 11 and high uptake capacity for C 2 H 2 from 65.2 to 182 cm 3 g –1 (298K, 1 bar), an efficient separation is confirmed by breakthrough experiments. The near-record high uptake for C 2 H 6 (166.8 cm 3 g –1 ) contributes to the promise for C 2 H 6 -selective separation of C 2 H 6 /C 2 H 4 . The multi-module pore expansion enables transition from C 3 H 6 -selective to more desirable C 3 H 8 -selective separation with extraordinarily high C 3 H 8 uptake (254.9 cm 3 g –1 ) and high separation potential (1.25 mmol g –1 ) for C 3 H 8 /C 3 H 6 (50:50 v/v) mixture.

36 MATERIALS SCIENCE↗

Integrated Bare Narrow Capillary-Hydrodynamic Chromatographic System for Free-Solution DNA Separation at the Single-Molecule Level

We have recently introduced a new technique, Bare Narrow Capillary Hydrodynamic Chromatography (BaNC–HDC), to resolve DNA without sieving matrices. In this technique, the separation capillaries had a diameter usually from a few hundred nanometers to a few micrometers. While high resolutions were obtained (especially for large DNA fragments), the sample injection and DNA elution were tedious, and the separation results (peak areas) were not reproducible. This was caused by the extremely low injection volumes (a few picoliters) and elution rates (<1 nanoliter per minute), which prevented us from utilizing reliable injection valves and commercial high performance liquid chromatographic pumps. In this work, we incorporate a microfabricated chip injector, and a high-pressure electroosmotic pump (EOP) to address these issues. The chip injector allows us to reliably and reproducibly inject low volumes (as low as ~1 pL) of samples into the narrow separation capillary, while the EOP provides flow rates and pressures perfectly suited for BaNC–HDC separations. Using the above system, we resolve kilo base-pair DNA fragments rapidly (in a few min) with high resolutions, and the limit of detection for double stranded DNA reaches a few molecules. The experimental parameters affecting resolutions are also discussed. Incorporation of a chip injection scheme makes automating BaNC–HDC separations readily achievable.

59 BASIC BIOLOGICAL SCIENCES↗

Pore Aperture Control Toward Size‐Exclusion‐Based Hydrocarbon Separations

Metal–organic frameworks (MOFs) have been proposed as a promising material for non-thermal chemical separations owing to their high structural diversity and tunability. Here, we report the synthesis of a zinc-based MOF containing a three-dimensional (3D) linker, bicyclo[2.2.2]octane-1,4-dicarboxylic acid, with high thermal stability towards the separation of hexane isomers. The incorporation of the 3D linker enhances the structural stability and provides well-defined pore apertures/channels with sub-Ångstrom precision. This precision allowed for the separation of similarly sized hexane isomers based on subtle differences in their kinetic diameters. Multi-component liquid phase batch experiments confirmed the separation of hexanes mixture into linear, monobranched, and dibranched isomers. This work represents a significant milestone in the construction of stable Zn-based MOFs and the incorporation of 3D linkers as a potential solution to challenging separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Escalated Phase Separation Driven Enhanced Magnetoresistance in Manganite/Iridate Epitaxial Heterostructures

Phase separation in manganites leads to unique magnetic and electronic properties. 50% Ca-doped LaMnO 3 (LCMO), at the boundary of ferromagnetic (FM) and antiferromagnetic (AFM) states in La 1-x Ca x MnO 3 (0 ≤ x ≤ 1), is an ideal system to study phase separation behavior. The investigation reveals the effect of a 5d-metal perovskite SrIrO 3 (SIO) on the phase separation, magnetic, and magnetoresistance (MR) properties of LCMO. Single-layer and bilayer LCMO films, both appear purely ferromagnetic along the in-plane (IP) magnetic field direction, but show the tendency of temperature-dependent ferromagnetic and antiferromagnetic or charge-ordered (CO) phase separation with the out-of-plane (OOP) applied field. The MR, and colossal magnetoresistance (CMR), observed in LCMO/SIO bilayers are two orders and an order of magnitude (in %) larger, respectively than that in the single-layer film. The coexistence of FM and AFM/CO phases is responsible for the CMR and MR enhancement in the LCMO/SIO bilayer, pointing toward the importance of the phase separation and competition of both the individual materials in enhancing their magnetic and electronic properties.

36 MATERIALS SCIENCE↗

Redox‐Functionalized Semiconductor Interfaces for Photoelectrochemical Separations

Redox-mediated electrosorption is a promising platform for selective electrochemical (EC) separations, due to its molecular selectivity, high uptake, and tunability for target ions. However, the electrical energy required is mainly generated by non-renewable energy sources, which limits its sustainability and overall impact to decarbonization. Here, a redox-mediated photoelectrochemical (PEC) separation process using polyvinyl ferrocene functionalized TiO 2 nanorod electrodes is proposed, which integrates direct solar energy as a driver for the selective electrosorption. The photoelectrochemically-driven oxidation and reduction with both homogeneous and heterogeneous ferrocene-systems is investigated to establish the underlying mechanism. The PEC system can separate heavy metal oxyanions at lower voltages or even without electrical energy. At 0.3 V versus SCE, a 124 mg g −1 uptake for Mo is achieved, which is comparable to the performance of EC cells at 0.75 V versus SCE. Thus, PEC systems not only can generate energy for spontaneous redox-separations, but also can reduce electrical energy consumption by 51.4% compared to EC cells for separation processes when coupled with an external electrical energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Adsorptive Membrane Platform for Precision Ion Separation: Membrane Design and First‐Principles Studies

One of the key challenges in separation science is the lack of precise ion separation methods and mechanistic understanding crucial for efficiently recovering critical materials from complex aqueous matrices. Herein, first-principles electronic structure calculations and in situ Raman spectroscopy are studied to elucidate the factors governing ion discrimination in an adsorptive membrane specifically designed for transition metal ion separation. Density functional theory calculations and in situ Raman data jointly reveal the thermodynamically favorable binding preferences and detailed adsorption mechanisms for competing ions. How membrane binding preferences correlate with the electronic properties of ligands is explored, such as orbital hybridization and electron localization. The findings underscore the importance of the phenolate group in oxime ligands for achieving high selectivity among competing transition metal ions. In-depth understanding on which specific atomistic site within the microenvironment of metal-ligand binding pockets governs the ion discrimination behaviors of the host will build a solid foundation to guide the rational design of next-generation materials for precision separation essential for energy technologies and environment remediation. In tandem, synthetic controllability is demonstrated to transform 3D micrometer-scale crystals to a 2D crystalline selective layer in membranes, paving the way for more precise and sustainable advances in separation science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of field-based separations for the rapid identification of uranium and plutonium

The development of rapid, radioanalytical techniques to separate uranium and plutonium from complex, field samples are needed for the timely and accurate determination of nuclear material origin, and processing activities. Widespread use of nuclear power and technology in the world has increased demands on analytical laboratories from the monitoring of numerous low-level, environmental samples with variable compositions. Environmental sampling has proven to be one of the strongest technical measures for detecting nuclear material and activities. With the increase in sampling demands, new technologies must offer improvements such as automation, high throughput, reproducible chemical separations, short analysis times, and reduced costs to be effective. We have been developing a portable, separations system for uranium (U) and plutonium (Pu) separations based upon selective extraction of target elements using an extraction chromatographic resin which would allow for simple and fast identifcation when coupled with the appropriate sample digestor and detection systems. The microfluidic design minimizes elution volumes and concentrates the elements of interest in a purified stream. Flowsheet development and testing was demonstrated on a single, micro-column system with an acidified, iron, uranium, and plutonium nitrate stream. The recovery of Pu was optimized by examining various reducing agents at different concentrations for rapid, quantitative recovery from the flow-through design. Quantitative recovery and high selectivity of U and Pu was achieved in the appropriate stripping stages and provided purified and concentrated U and Pu streams. The microfluidic system suggests automation in a small, footprint unit while exploiting the in-line processing of extraction chromatographic resins as the primary means of concentrating the radionuclides from the raw acidic feed and separating the elements into purified streams.

Extraction Chromatography↗

A new method for separating first row transition metals and actinides from synthetic melt glass

A new method was developed for separating Co, Fe, and Sc from complex debris matrices using the extraction chromatography resin DGA. The activation products Co-58, Mn-54, and Sc-46 were used to characterize the separation of the synthetic melt glass solutions. In the separation scheme that was developed, Au, Co, Cu, Fe, Sc, and Ti were separated from the rest of the sample constituents. In this paper, the synthetic melt glass separation method, efficiency, recoveries, and the length of procedure will be discussed. In conclusion, batch contact adsorption studies for Na and Sc for DGA resin are discussed as well.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Crosslinked polymeric ionic liquid stationary phases incorporating a combination of silver(I) and copper(II) ions for olefin separations by gas chromatography

The development of efficient and selective olefin separation technologies is a critical challenge within the chemical industry given the high energy demands of conventional cryogenic distillation methods. To address this, the study explores the effectiveness of polymeric ionic liquid (PIL) stationary phases in gas chromatography (GC) that incorporate both silver(I) ([Ag + ]) and copper(II) ([Cu 2+ ]) ions for enhanced olefin separation via π-complexation interactions. Further, the effects of both non-crosslinked and crosslinked PIL stationary phases containing varying ratios of [Ag⁺] and [Cu²⁺] ions were systematically investigated to evaluate their impact on the separation of olefins from paraffins and structurally similar olefins. Retention measurements using a broad range of olefinic probes revealed that [Ag⁺] ions provided stronger and more consistent π-complexation in PIL-based stationary phases, while [Cu²⁺] ions preferentially enhance olefin retention in crosslinked systems. Furthermore, thermal stability studies showed that [Ag + ]-containing PIL stationary phases maintain stable olefin separation efficiency over prolonged exposure under elevated temperatures, while crosslinked PIL stationary phases containing [Cu 2+ ] ions exhibited stronger retention due to increased surface adsorption. These findings provide insight into the tunability of metal–olefin interactions using PIL-based stationary phases and suggest design strategies for achieving thermally stable and highly selective chromatographic separations of unsaturated hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature and strain rate dependent behavior of polymer separator for Li-ion batteries

Safe performance of advanced Li-ion batteries relies on integrity of the separator membrane which prevents contact between electrodes of opposite polarity. Current work provides detailed study of mechanical behavior of such membrane. Temperature and strain rate sensitivity of the triple-layer polypropylene (PP)/polyethylene (PE)/polypropylene (PP) porous separator for Li-ion batteries was studied experimentally under controlled temperatures of up to 120° (393 K), and strain rates (from 1∙10-4s-1 to 0.1s-1). Digital image correlation was used to study strain localization in separator under load. The results show significant dependence of mechanical properties on temperature, with the yield stress decreasing by 30% and elastic modulus decreasing by a factor of two when the temperature is increased from 20 °C to 50 °C. The strain rate strengthening also decreased with higher temperatures while the temperature softening remained independent of the applied strain rate. Application of temperature creates long lasting changes in mechanical behavior of separator as was revealed by performing experiments after the annealing. Such delayed effect of temperature application appears to have directional dependence. The results demonstrate complex behavior of polymer separator which needs to be considered in proper safety assessments of Li-ion batteries.

25 ENERGY STORAGE↗

Recycling of waste automotive laminated glass and valorization of polyvinyl butyral through mechanochemical separation

Due to strong binding, optical clarity, adhesion to many surfaces, toughness and flexibility polyvinyl butyral (PVB) resin films are commonly used in the automotive and architectural application as a protective interlayer in the laminated glass. Worldwide million tons of PVB waste generated from end-of-life automotive associated with various environmental issues. Stringent environmental directive, higher land cost eliminates land filling option, needs a study, we have developed a mechanochemical separation process to separate PVB resins from glass and characterized the separated PVB through various techniques, i.e., scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), infrared spectroscopy (IR) and nuclear magnetic resonance spectroscopy (NMR). Commercial nonionic surfactants D201 used for the mechanochemical separation purpose. Through parameter optimization following conditions are considered to be the optimum condition; 30 vol% D201, stirring speed of 400 rpm, 35 °C temperature, operation time 1 h, and dilute D201 volume to waste automotive laminated glass weight ratio of ≈25. The technology developed in our laboratory is sustainable, environmentally friendly, techno-economical feasible process, capable of mass production (recycling). - Highlights: • Waste automotive laminated glass and polyvinyl butyral mechanochemically separated. • An economical total recovery and environment-friendly process has been developed. • It is a global problem rather than regional environmental issue has been addressed. • Without using hazardous chemical wastes are being converted to a wealth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Opportunities for plasma separation techniques in rare earth elements recycling

Rare earth elements recycling has been proposed to alleviate supply risks and market volatility. In this context, the potential of a new recycling pathway, namely plasma mass separation, is uncovered through the example of nedodymium - iron - boron magnets recycling. Plasma mass separation is shown to address some of the shortcomings of existing rare earth elements recycling pathways, in particular detrimental environmental effects. Here, a simplifed mass separation model suggests that plasma separation performances could compare favourably with existing recycling options. In addition, simple energetic considerations of plasma processing suggest that the cost of these techniques may not be prohibitive, particularly considering that energy costs from solar may become significantly cheaper. Further investigation and experimental demonstration of plasma separation techniques should permit asserting the potential of these techniques against other recycling techniques currently under development.

Economic feasibility↗

Electrostatic interaction effect for human DNA separation with functionalized mesoporous silicas

This work describes the development of highly efficient human DNA separation with functionalized mesoporous silica (FMS) materials. To demonstrate the electrostatic interaction effect between the target DNA molecules and FMS, three aminofunctionality types comprised of a mono-, a di-, and a tri-amine functional group were introduced on the inner surfaces of mesoporous silica particles. Systematic characterization of the synthesized materials was achieved by solid-state {sup 29}Si and {sup 13}C-NMR techniques, BET, FT-IR, and XPS. The DNA separation efficiency was explored via the function of the amino-group number, the amount used, and the added NaCl concentration. The DNA adsorption yields were high in terms of the use of triaminofunctionalized FMS at the 10 ng/L level, and the DNA desorption efficiency showed the optimum level at over 3.0 M NaCl concentration. The use of FMS in a DNA separation process provides numerous advantages over the conventional silica-based process. -- Graphical abstract: Control of electrostatic interaction for DNA biding by aminofunctionalized modification: mono-amine (MA), di-amine (DA), and tri-amine (TA). The red-ball means the amine groups of FMS. Display Omitted Highlights: {yields} Highly efficient and direct DNA separation was demonstrated with aminofunctionalized FMS. {yields} Systematic characterization of the synthesized materials was achieved by solid-state {sup 29}Si and {sup 13}C-NMR techniques, BET, FT-IR, and XPS. {yields} The DNA separation efficiency was explored via the function of the amino-group number, particles size, amount of FMS used, and the NaCl concentration. {yields} The electrostatic interaction between the target DNA labeled by cyanine (Cy-5) and aminofunctionalized FMS were achieved via confocal microscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced, continuous, liquid-liquid extraction and in-situ separation of volatile fatty acids from fermentation broth

In 2018 alone, the US landfilled 35.3 million tons of food waste, about 24% of the total landfilled mass. In addition to the negative impacts landfills have demonstrated on the environment and human health, some states have begun to outlaw or dissuade the disposal of food waste and sewage sludge into landfills altogether. An urgent need has thus been created for the development of digestion processes like anaerobic digestion (AD) and arrested methanogenesis (AM) to convert food waste into valuable chemical products. Unfortunately, the buildup of volatile fatty acids (VFAs) during these processes eventually halts the reaction, and energy efficient methodologies for VFA removal are critical for the operation of fermenters. Additionally, VFAs themselves can serve as valuable chemical precursors, and recently AD processes have been modified to increase VFA production during fermentation. However, even with significant research over the past three decades, the separation of VFAs from the fermenter broth has remained expensive. Moreover, the separation of these VFAs from the fermenter broth may cost up to 50% of the entire process budget, hindering the widespread commercial adoption of AD and AM. Here we present a novel liquid-liquid extraction process termed CLEANS (Continuous Liquid-liquid Extraction And iN-situ Separation) as a highly efficient method for continuously separating VFAs from a real fermentation broth solely under gravity. Our optimized process (using an aqueous broth feed pH of 2.5, tri-noctylamine as an extractant, and a 10:1 ratio of aqueous broth to organic extractant), achieved a VFA distribution constant K D = 44.5 ± 7.9, a single-pass recovery = 81.3 ± 2.5%, and an extraction factor = 8.1 ± 0.3. These KD values are over an order of magnitude higher than what has been previously reported for comparable processes. A high aqueous-to-organic flowrate ratio, enabled for the first time by CLEANS, was found to be particularly crucial for achieving optimal extraction. Our separation process demonstrates excellent reproducibility and potential for scalability. The economic and environmental implications of this work are briefly discussed.

42 ENGINEERING↗

A Novel Zwitterionic Chromatography Approach to Separate Lithium from Unconventional Resources

Lithium (Li) is a key element for clean energy technologies, and, accordingly, the global lithium demand has been increasing rapidly. Therefore, to meet the Li demand and maintain supply chain stability, it is critical to develop efficient lithium extraction technologies that allow exploitation of unconventional lithium resources, such as geothermal brines and inland brine streams. However, the recovery of Li from these resources is challenging due to low Li concentration, low ratios of Li/Na, Li/Mg, or Li/Ca, and complex feed compositions. To address this, we introduced a new Direct Lithium Extraction (DLE) process using Zwitterionic Chromatography (ZIC) to separate Li from other salts. Since salts are partitioned on ZIC under water elution, no reagent chemicals are needed, and the Li separation is not limited by the adsorption capacity. We prepared 13 different zwitterionic (ZI) resins to investigate the salt retention on various ZI groups and then screened out promising sorbents for efficient Li separation. It was found that salt retention was synergistically affected by the pore size and ZI configurations. Using carboxybetaine (QAC3CA) sorbents, multicomponent separations showed that Li can be partitioned from divalent salts or Na with selectivities of 1.8 or 1.9, respectively. Although the selectivity is relatively low, in real brine tests, Li was separated from Ca and Mg with 79.2 % yield, showing the potential for a continuous process to achieve high productivity and high yield. Simulation studies suggest the salt elution mechanism is related to the hydration reaction energy and the effective hydrated radius of cations.

critical minerals↗

Potential for light-induced separation of critical rare-earth elements

Current methods for separations of critical rare earth elements (REEs) require multi-step, waste-generating procedures that lack the ability to selectively separate similarly sized ions, despite such an onerous process. REEs possess unique optoelectronic properties that are often exploited for photomagnetic or photoluminescent applications but could be harnessed to drive element selective separations. Here, recent work exploring photochemical reactions of REE complexes points to promise for investigating alternative separations using photoactive molecules and macromolecular frameworks, highlighting a possible pathway towards realizing practical REE separations to increase the sustainability and longevity of mining and recycling these elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of the medium’s density on the hydrocyclonic separation of waste plastics with different densities

Highlights: • The density of medium is the key parameter to separate plastic particles. • The paper shows the theoretical analysis is in good agreement with test. • The optimum value of the medium’s density was obtained. • The optimum value of the medium’s density lies near that of denser particles. - Abstract: Hydrocyclones can be applied to recycle waste plastics with different densities through separating plastics based on their differences in densities. In the process, the medium density is one of key parameters and the value of the medium’s density is not just the average of the density of two kinds of plastics separated. Based on the force analysis and establishing the equation of motion of particles in the hydrocyclone, a formula to calculate the optimum separation medium density has been deduced. This value of the medium’s density is a function of various parameters including the diameter, density, radial position and tangential velocity of particles, and viscosity of the medium. Tests on the separation performance of the hydrocyclone has been conducted with PET and PVC particles. The theoretical result appeared to be in good agreement with experimental results.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗