Search NASA⌕ Search

SEARCH · Search NASA

Results for “sharp features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Design of an inflatable, optically controlled and fed, phased array antenna

Initial studies on the antenna requirements of the Space Exploration Initiative (SEI) system architecture have indicated the need for large, lightweight antennas. This paper discusses the design of a modular, inflatable, optically controlled and fed phased array antenna suitable for SEI aplications. When high gain antennas are required for space applications, large aperture mesh or collapsible solid antenna reflectors are considered. However, these designs are generally not lightweight, and have complicated deployment mechanisms. Alternatively, the modular, inflatable antenna design discussed here is a lightweight, modular design that incorporates a simple deployment scheme, and after deployment, can be rigidized to enhance its structural integrity. Further, the design features the fiberoptic distribution of both RF and control signals to individual microwave integrated circuit/reflector modules in each of the inflatable, phased array antenna cells. The result of combining these two technologies is a modular, phased array antenna design that is both mechanically and electrically agile and robust.

Kunath, Richard R.↗
DOE OSTI2023

Magnetism and spin-dependent transport phenomena across Verwey and Morin transitions in iron oxide/Pt bilayers

Understanding the influence of phase coexistence and phase transitions on spin transport properties in a ferromagnet/heavy metal (FM/HM) system is of utmost importance for spintronics. Here, we report a comprehensive investigation of the magnetic and spin transport properties of biphase iron oxide (BPIO = α-Fe 2 O 3 +Fe 3 O 4 )/Pt films over a wide temperature range, 10K ≤ T ≤ 300K. In-plane (IP) and out-of-plane (OOP) magnetometry and radio frequency transverse susceptibility measurements confirm the characteristic features of the Verwey and Morin transitions at T V ~ 120K and TM ~ 200 K, respectively. Further, anisotropic magnetoresistance (AMR) is observed in the BPIO film, which arises mainly from the spin polarized tunneling of conduction electrons between neighboring uniformly magnetized grains through the resistive grain boundary. Spin Hall magnetoresistance (SMR) and spin Hall anomalous Hall effect (SH-AHE) are detected in the BPIO/Pt films. Around the T V , the temperature evolution of SMR shows a sharp maximum, while SH-AHE exhibits a steep decrease. Both SMR and SH-AHE are strongly susceptible to the Verwey transition but the Morin transition, indicating that the interfacial magnetism of our BPIO/Pt film is dominated by the Fe 3 O 4 phase rather than the α-Fe 2 O 3 phase.

36 MATERIALS SCIENCE↗
NASA NTRS1988

Shock tube investigation of dynamic response of pressure transducers for validation of rotor performance measurements

For some time now, NASA has had a program under way to aid in the validation of rotor performance and acoustics codes associated with the UH-60 rotary-wing aircraft; and to correlate results of such studies with those obtained from investigations of other selected aircraft rotor performance. A central feature of these studies concerns the dynamic measurement of surface pressure at various locations up to frequencies of 25 KHz. For this purpose, fast-response gauges of the Kulite type are employed. The latter need to be buried in the rotor; they record surface pressures which are transmitted by a pipette connected to the gauge. The other end of the pipette is cut flush with the surface. In certain locations, the pipette configuration includes a rather sharp right-angle bend. The natural question has arisen in this connection: In what way are the pipettes modifying the signals received at the rotor surface and subsequently transmitted to the sensitive Kulite transducer element. The basic details and results of the program performed and recently completed in the High Pressure Shock Tube Laboratory of the Department of Aeronautics and Astronautics at Stanford University are given.

Bershader, Daniel↗
NASA NTRS1992

Hopkins ultraviolet telescope observations of the far-ultraviolet spectrum of NGC 4151

Observations of the FUV spectrum of the Seyfert galaxy NGC 4151 from 912 to 1860 A during the flight of Astro-1 aboard the space shuttle Columbia in December 1990 are reported. Broad emission lines with full-width at half-maximum of about 8500 km/s dominate the spectrum. Numerous absorption features modify the continuum shape, particularly at wavelengths shortward of Ly-alpha. The continuum turns over sharply below 1000 A and disappears by 924 A, well above the redshifted Lyman edge of NGC 4151 at 915 A. The absorption lines have intrinsic widths of about 1000 km/s and are blueshifted relative to the system velocity of NGC 4151 by 200-1300 km/s. Absorption of the continuum by the converging higher-order Lyman lines explains the sharp turnover of the continuum below 1000 A. The blueshifts of the absorption lines, their large intrinsic widths, and the inferred high densities are all consistent with outflowing material originating in the broad-line region.

Kriss, G. A.↗
NASA NTRS2015

Diagenetic Crystal Clusters and Dendrites, Lower Mount Sharp, Gale Crater

Since approximately Sol 753 (to sol 840+) the Mars Science Laboratory Curiosity rover has been investigating the Pahrump locality. Mapping of HiRise images suggests that the Pahrup locality represents the first occurrence of strata associated with basal Mount Sharp. Considerable efforts have been made to document the Pahrump locality in detail, in order to constrain both depositional and diagenetic facies. The Pahrump succession consists of approximately 13 meters of recessive-weathering mudstone interbedded with thin (decimeter-scale) intervals of more erosionally resistant mudstone, and crossbedded sandstone in the upper stratigraphic levels. Mudstone textures vary from massive, to poorly laminated, to well-laminated. Here we investigate the distribution and structure of unusual diagenetic features that occur in the lowermost portion of the Pahrump section. These diagenetic features consist of three dimensional crystal clusters and dendrites that are erosionally resistant with respect to the host rock.

Kah, L. C.↗
DOE OSTI2019

GPR Imaging for Deeply Buried Objects: A Comparative Study Based on Compositing of Scanning Frequencies and a Chirp Excitation Function

Compositing of ground penetrating radar (GPR) scans of differing frequencies have been found to produce cleaner images at depth using the Gaussian mixture model (GMM) feature of the expectation-maximization (EM) algorithm. GPR scans at various heights (“Stand Off”), as well as ground-based scans, have been studied. In this paper, we compare the GPR response from a chirp excitation function-based radar with the response from the EM GMM algorithm compositing process, using the same mix of frequencies. A chirp excitation pulse was found to be effective in delineating the defined buried object, but the resulting image is less sharp than the GMM EM method.

58 GEOSCIENCES↗
NASA NTRS1981

The AKR emission cone at low frequencies

It is noted that certain of the ISEE-1 observations between the plasmasphere and the auroral zone have revealed the emission cone of auroral kilometric radiation (AKR) unaffected by plasmaspheric refraction. At some distance from the source, the cone produced a sharp low-frequency boundary in the AKR signals, which was displaced above the cyclotron frequency. The variation of this boundary, together with other aspects of the AKR signals, suggested that the AKR emission cone closed toward a hollow, roughly 45 deg limit cone with decreasing frequency, duplicating the behavior previously found with ISIS-1 at the opposite end of the AKR spectrum. It is pointed out that the hollow limit cone at low frequencies is a new feature, not previously reported.

Calvert, W.↗
NASA NTRS1992

Direct numerical simulation of laminar breakdown in high-speed, axisymmetric boundary layers

The compressible Navier-Stokes equations are solved using spectral collocation and high-order compact-difference techniques to simulate the laminar breakdown in high-speed, axisymmetric boundary-layer flow. Mach 4.5 flow along a hollow cylinder and Mach 6.8 flow along a sharp cone are considered. Data obtained replicate two previously unexplained phenomena, namely, the appearance of so-called 'rope-like waves' and 'the precursor transition effect', in which transitional flow originates near the critical layer well upstream of the transition location at the wall. The numerical data also reveal that neither of these effects can be explained, even qualitatively, by linear stability theory alone. It is shown that rope-like appearance arises from secondary instability. Certain features of the precursor transition effect also emerge from secondary instability but its nature is revealed to be fundamentally nonlinear.

Pruett, C. D.↗
DOE OSTI2023

Regional infrasonic observations from surface explosions – influence of atmospheric variations and realistic terrain

SUMMARY A pair of 1-ton, conventional surface explosions were conducted at the Nevada National Security Site in the fall of 2020 producing seismoacoustic signatures observable hundreds of kilometres from the source location. Regional infrasonic observations include tropospheric ducting at large distances to the south, a wide stratospheric waveguide with signals observed more than 700 km to the east, and anomalous arrivals in the stratospheric shadow zone. Notable differences in propagation between the events are identified despite the explosions being conducted just two days apart due to a sharp temporal shift in the tropospheric winds as well as structural changes in the stratospheric winds. Propagation simulations of the two events have been completed using a combination of ray tracing and parabolic equation (PE) methods. Simulations have been conducted to quantify the impact of the temporal variations in the atmosphere as well as the influence of terrain on propagation. Temporal variations in reflection locations are found to produce notable changes in downrange propagation due to spatially varying terrain features. Finite frequency effects modelled by the PE are found to predict ensonification not included in corresponding 2D ray tracing simulations. Notable variations in predicted signal amplitude are found due to focusing by along-path and cross-path terrain gradients; though, the later of these is only modelled using fully 3D ray tracing analysis.

58 GEOSCIENCES↗
DOE OSTI2018

A Copula-Based Conditional Probabilistic Forecast Model for Wind Power Ramps

Efficient management of wind ramping characteristics can significantly reduce wind integration costs for balancing authorities. By considering the stochastic dependence of wind power ramp (WPR) features, this paper develops a conditional probabilistic wind power ramp forecast (cp-WPRF) model based on Copula theory. The WPRs dataset is constructed by extracting ramps from a large dataset of historical wind power. Each WPR feature (e.g., rate, magnitude, duration, and start-time) is separately forecasted by considering the coupling effects among different ramp features. To accurately model the marginal distributions with a copula, a Gaussian mixture model (GMM) is adopted to characterize the WPR uncertainty and features. The Canonical Maximum Likelihood (CML) method is used to estimate parameters of the multivariable copula. The optimal copula model is chosen based on the Bayesian information criterion (BIC) from each copula family. Finally, the best conditions based cp-WPRF model is determined by predictive interval (PI) based evaluation metrics. Numerical simulations on publicly available wind power data show that the developed copula-based cp-WPRF model can predict WPRs with a high level of reliability and sharpness.

17 WIND ENERGY↗
DOE OSTI2017

JET Formation in Solar Atmosphere Due to Magnetic Reconnection

Using numerical simulations, we show that jets with features of type II spicules and cool coronal jets corresponding to temperatures of 10{sup 4} K can be formed as a result of magnetic reconnection in a scenario with magnetic resistivity. For this, we model the low chromosphere–corona region using the C7 equilibrium solar atmosphere model, assuming that resistive MHD rules the dynamics of the plasma. The magnetic field configurations we analyze correspond to two neighboring loops with opposite polarity. The formation of a high-speed and sharp structure depends on the separation of the loops’ feet. We analyze the cases where the magnetic field strength of the two loops is equal and different. In the first case, with a symmetric configuration the jets rise vertically, whereas in an asymmetric configuration the structure shows an inclination. With a number of simulations carried out under a 2.5D approach, we explore various properties of the excited jets, namely, inclination, lifetime, and velocity. The parameter space involves a magnetic field strength between 20 and 40 G, and the resistivity is assumed to be uniform with a constant value of the order 10{sup −2}Ω⋅m.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Through-Thickness Strain Gradient in a Hot-Rolled Al-Mg Alloy Obtained by Nanoindentation and Glancing Angle X-Ray Diffraction

Combined nanoindentation and glancing angle X-ray diffraction (GAXD) methods were used to study the mechanical properties of near-surface microstructures (NSMs) of a hot-rolled 5xxx aluminum alloy. Nanoindentations with a sharp indenter were carried out with penetration depth ranging from 250 nm to 4500 nm at the near-surface regions as well as the bulk of the hot-rolled alloy. The primary indentation parameter presented here was the hardness, given that plastic strain obtained from GAXD experiment could be correlated with the hardness value. Analysis of nanoindentation hardness results proved that NSMs of this alloy on average were harder than the bulk due to the presence of different surface features discussed here. The GAXD experiments were performed between a minimum incident angle 0.025°, equivalent to 765 nm penetration depth, and a maximum angle 1°, equivalent to 3000 nm penetration depth. The strain-induced broadening in the diffraction peaks was calculated by the Williamson–Hall technique. Both indentation hardness and glancing angle diffraction results confirmed strain gradient as a function of depth in the NSMs of the alloy. Both techniques also showed that the thickness of the subsurface layer (i.e., several micrometers below the surface) of hot-rolled sample was approximately 2.44 μm at the tested areas. Additionally, reported results provided evidence for the ability to use glancing angle X-ray diffraction as a nondestructive tool for the measurement of subsurface layers' thickness as well as microstrain (non-uniform or plastic strain) as a function of depth.

36 MATERIALS SCIENCE↗
NASA NTRS2021

The Stochastic X-ray Variability of the Accreting Millisecond Pulsar IGR J17062-6143

This work presents an investigation of the stochastic X-ray variability from the 164 Hz accreting millisecond pulsar IGR J17062–6143, based on regular observations collected with the Neutron Star Interior Composition Explorer between 2017 July and 2020 August. Over this period, the power density spectrum showed a stable morphology, with broad ∼ 25% rms band-limited noise below 16 Hz. Quasiperiodic oscillations (QPOs) were occasionally observed, with the most notably detections including a low-frequency QPO centered at 2.7 Hz and a sharp QPO centered at 115 Hz that may be a 2:3 resonance with the spin frequency. Further, the energy dependence of the band-limited noise is studied through a spectroscopic analysis of the complex covariance in two frequency intervals. It is found that the power law continuum is the primary driver for the observed variability, although the thermal (blackbody) emission also appears to be intrinsically variable in area (5% rms) and temperature (1% rms). Notably, the 1 keV emission feature seen in all X-ray spectra of IGR J17062–6143 varies with the same amplitude as the power law, but systematically lags behind that continuum emission. These results appear consistent with a scenario in which a time variable Compton-scattering corona is the primary source for the observed stochastic variability, with the variability observed in the emission feature and at the lowest photon energies being due to the disk reflection of the power law continuum.

Petrus Bult↗
NASA NTRS1973

The dayside midlatitude plasma trough

The electrostatic probe experiment aboard the ISIS-1 satellite detects a quasi-stable dayside plasma trough in the protonosphere with a characteristic time of at least 2 weeks. This behavior contrasts with measurements at 1000 km from Explorer-22, which indicate a trough of a characteristic time less than a satellite orbit period. Associated with the protonospheric trough is an electron temperature maximum approximately 6000 K that is sharp at midnight and broad at noon. In spring and summer, a second noontime temperature maximum often appears poleward of 70 invariant latitude, accompanied by an enhancement in the ionization. The ISIS-1 data indicates that local processes such as dayside F-region photoionization and ionization by energetic cusp particles produce enhancements in plasma density and electron temperature. These enhancements modify the plasmaspheric boundary to varying degrees along a magnetic field tube, thus leading to a plasmas pheric boundary with distinctive features at various positions along a field tube.

Miller, N. J.↗
NASA NTRS1983

Advanced Gas Turbine (AGT) technology development

A 74.5 kW (100 hp) automotive gas turbine was evaluated. The engine structure, bearings, oil system, and electronics were demonstrated and no shaft dynamics or other vibration problem were encountered. Areas identified during the five tests are the scroll retention features, and transient thermal deflection of turbine backplates. Modifications were designed. Seroll retention is addressed by modifying the seal arrangement in front of the gasifier turbine assembly, which will increase the pressure load on the scroll in the forward direction and thereby increase the retention forces. the backplate thermal deflection is addressed by geometric changes and thermal insulation to reduce heat input. Combustor rig proof testing of two ceramic combustor assemblies was completed. The combustor was modified to incorporate slots and reduce sharp edges, which should reduce thermal stresses. The development work focused on techniques to sinter these barrier materials onto the ceramic rotors with successes for both material systems. Silicon carbide structural parts, including engine configuration gasifier rotors (ECRs), preliminary gasifier scroll parts, and gasifier and power turbine vanes are fabricated.

Source record↗
NASA NTRS2002

On the Structure of the Iron K-Edge

It is shown that the commonly held view of a sharp Fe K edge must be modified if the decay pathways of the series of resonances converging to the K thresholds are adequately taken into account. These resonances display damped Lorentzian profiles of nearly constant widths that are smeared to impose continuity across the threshold. By modeling the effects of K damping on opacities, it is found that the broadening of the K edge grows with the ionization level of the plasma, and the appearance at high ionization of a localized absorption feature at 7.2 keV is identified as the Kbeta unresolved transition array.

Palmeri, P.↗
DOE OSTI2016

THE INTRAGROUP VERSUS THE INTRACLUSTER MEDIUM

Galaxy groups differ from clusters primarily by way of their lower masses, M ∼ 10{sup 14} M {sub ⊙} versus M ∼ 10{sup 15} M {sub ⊙}. We discuss how mass affects the thermal state of the intracluster or the intragroup medium, specifically as to their entropy levels and radial profiles. We show that entropy is produced in both cases by the continuing inflow of intergalactic gas across the system boundary into the gravitational potential well. The inflow is highly supersonic in clusters, but weakly so in groups. The former condition implies strong accretion shocks with substantial conversion of a large bulk kinetic into thermal energy, whereas the latter condition implies less effective conversion of lower energies. These features produce a conspicuous difference in entropy deposition at the current boundary. Thereafter, adiabatic compression of the hot gas into the potential well converts such time histories into radial profiles throughout a cluster or a group. In addition, in both cases, a location of the system at low z in the accelerating universe or in a poor environment will starve out the inflow and the entropy production and produce flattening or even bending down of the outer profile. We analyze, in detail, the sharp evidence provided by the two groups ESO 3060170 and RXJ1159+5531 that have been recently observed in X-rays out to their virial radii and find a close and detailed match with our expectations.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1993

Training high performance skills using above real-time training

The Above Real-Time Training (ARTT) concept is a unique approach to training high performance skills. ARTT refers to a training paradigm that places the operator in a simulated environment that functions at faster than normal time. Such a training paradigm represents a departure from the intuitive, but not often supported, feeling that the best practice is determined by the training environment with the highest fidelity. This approach is hypothesized to provide greater 'transfer value' per simulation trial, by incorporating training techniques and instructional features into the simulator. These techniques allow individuals to acquire these critical skills faster and with greater retention. ARTT also allows an individual trained in 'fast time' to operate at what appears to be a more confident state, when the same task is performed in a real-time environment. Two related experiments are discussed. The findings appear to be consistent with previous findings that show positive effects of task variation during training. Moreover, ARTT has merit in improving or maintaining transfer with sharp reductions in training time. There are indications that the effectiveness of ARTT varies as a function of task content and possibly task difficulty. Other implications for ARTT are discussed along with future research directions.

Guckenberger, Dutch↗