Search NASA⌕ Search

SEARCH · Search NASA

Results for “software optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Development and Application of a Tool for Optimizing Composite Matrix Viscoplastic Material Parameters

This document describes a recently developed analysis tool that enhances the resident capabilities of the Micromechanics Analysis Code with the Generalized Method of Cells (MAC/GMC) and its application. MAC/GMC is a composite material and laminate analysis software package developed at NASA Glenn Research Center. The primary focus of the current effort is to provide a graphical user interface (GUI) capability that helps users optimize highly nonlinear viscoplastic constitutive law parameters by fitting experimentally observed/measured stress-strain responses under various thermo-mechanical conditions for braided composites. The tool has been developed utilizing the MATrix LABoratory (MATLAB) (The Mathworks, Inc., Natick, MA) programming language. Illustrative examples shown are for a specific braided composite system wherein the matrix viscoplastic behavior is represented by a constitutive law described by seven parameters. The tool is general enough to fit any number of experimentally observed stress-strain responses of the material. The number of parameters to be optimized, as well as the importance given to each stress-strain response, are user choice. Three different optimization algorithms are included: (1) Optimization based on gradient method, (2) Genetic algorithm (GA) based optimization and (3) Particle Swarm Optimization (PSO). The user can mix and match the three algorithms. For example, one can start optimization with either 2 or 3 and then use the optimized solution to further fine tune with approach 1. The secondary focus of this paper is to demonstrate the application of this tool to optimize/calibrate parameters for a nonlinear viscoplastic matrix to predict stress-strain curves (for constituent and composite levels) at different rates, temperatures and/or loading conditions utilizing the Generalized Method of Cells. After preliminary validation of the tool through comparison with experimental results, a detailed virtual parametric study is presented wherein the combined effects of temperature and loading rate on the predicted response of a braided composite is investigated.

thermo-mechanical; MATLAB; GUI-Based Too↗

Adaptation and optimization of a line-by-line radiative transfer program for the STAR-100 (STARSMART)

A program to calculate upwelling infrared radiation was modified to operate efficiently on the STAR-100. The modified software processes specific test cases significantly faster than the initial STAR-100 code. For example, a midlatitude summer atmospheric model is executed in less than 2% of the time originally required on the STAR-100. Furthermore, the optimized program performs extra operations to save the calculated absorption coefficients. Some of the advantages and pitfalls of virtual memory and vector processing are discussed along with strategies used to avoid loss of accuracy and computing power. Results from the vectorized code, in terms of speed, cost, and relative error with respect to serial code solutions are encouraging.

Rarig, P. L.↗

Autonomous In-Situ Resources Prospector

This presentation will describe the concept of an autonomous, intelligent, rover-based rapid surveying system to identify and map several key lunar resources to optimize their ISRU (In Situ Resource Utilization) extraction potential. Prior to an extraction phase for any target resource, ground-based surveys are needed to provide confirmation of remote observation, to quantify and map their 3-D distribution, and to locate optimal extraction sites (e.g. ore bodies) with precision to maximize their economic benefit. The system will search for and quantify optimal minerals for oxygen production feedstock, water ice, and high glass-content regolith that can be used for building materials. These are targeted because of their utility and because they are, or are likely to be, variable in quantity over spatial scales accessible to a rover (i.e., few km). Oxygen has benefits for life support systems and as an oxidizer for propellants. Water is a key resource for sustainable exploration, with utility for life support, propellants, and other industrial processes. High glass-content regolith has utility as a feedstock for building materials as it readily sinters upon heating into a cohesive matrix more readily than other regolith materials or crystalline basalts. Lunar glasses are also a potential feedstock for oxygen production, as many are rich in iron and titanium oxides that are optimal for oxygen extraction. To accomplish this task, a system of sensors and decision-making algorithms for an autonomous prospecting rover is described. One set of sensors will be located in the wheel tread of the robotic search vehicle providing contact sensor data on regolith composition. Another set of instruments will be housed on the platform of the rover, including VIS-NIR imagers and spectrometers, both for far-field context and near-field characterization of the regolith in the immediate vicinity of the rover. Also included in the sensor suite are a neutron spectrometer, ground-penetrating radar, and an instrumented cone penetrometer for subsurface assessment. Output from these sensors will be evaluated autonomously in real-time by decision-making software to evaluate if any of the targeted resources has been detected, and if so, to quantify their abundance. Algorithms for optimizing the mapping strategy based on target resource abundance and distribution are also included in the autonomous software. This approach emphasizes on-the-fly survey measurements to enable efficient and rapid prospecting of large areas, which will improve the economics of ISRU system approaches. The mature technology will enable autonomous rovers to create in-situ resource maps of lunar or other planetary surfaces, which will facilitate human and robotic exploration.

Dissly, R. W.↗

Modeling Uncertainty in Time and Fuel Benefit Estimation for TASAR Operational Evaluation

The Traffic Aware Strategic Aircrew Requests concept aims to reduce weather-induced delays, improve route efficiency, and efficiently share route modification options by combining onboard avionics data, Automatic Dependent Surveillance-Broadcast data, and broadband internet data to generate optimal, traffic-compatible trajectory changes based on real-time traffic and weather data. Time and fuel benefits due to use of the Traffic Aware Planner (TAP) software can be estimated by taking the difference in predicted flight time and fuel usage before and after a TAP-inspired trajectory change is completed. Although TAP’s optimization algorithm predicts flight and fuel usage based on the current flight route and weather data, it does not account for possible air traffic controller-initiated trajectory changes, reroutes due to sudden weather changes, or other pilot/controller actions that may occur during flight. This paper introduces an approach for quantifying the uncertainty in estimated time and fuel benefits.

Burris, Joseph↗

Applying Reflective Middleware Techniques to Optimize a QoS-enabled CORBA Component Model Implementation

Although existing CORBA specifications, such as Real-time CORBA and CORBA Messaging, address many end-to-end quality-of-service (QoS) properties, they do not define strategies for configuring these properties into applications flexibly, transparently, and adaptively. Therefore, application developers must make these configuration decisions manually and explicitly, which is tedious, error-prone, and often sub-optimal. Although the recently adopted CORBA Component Model (CCM) does define a standard configuration frame-work for packaging and deploying software components, conventional CCM implementations focus on functionality rather than adaptive quality-of service, which makes them unsuitable for next-generation applications with demanding QoS requirements. This paper presents three contributions to the study of middleware for QoS-enabled component-based applications. It outlines reflective middleware techniques designed to adaptively: (1) select optimal communication mechanisms, (2) man- age QoS properties of CORBA components in their containers, and (3) (re)configure selected component executors dynamically. Based on our ongoing research on CORBA and the CCM, we believe the application of reflective techniques to component middleware will provide a dynamically adaptive and (re)configurable framework for COTS software that is well-suited for the QoS demands of next-generation applications.

Wang, Nanbor↗

The design and implementation of a parallel unstructured Euler solver using software primitives

This paper is concerned with the implementation of a three-dimensional unstructured grid Euler-solver on massively parallel distributed-memory computer architectures. The goal is to minimize solution time by achieving high computational rates with a numerically efficient algorithm. An unstructured multigrid algorithm with an edge-based data structure has been adopted, and a number of optimizations have been devised and implemented in order to accelerate the parallel communication rates. The implementation is carried out by creating a set of software tools, which provide an interface between the parallelization issues and the sequential code, while providing a basis for future automatic run-time compilation support. Large practical unstructured grid problems are solved on the Intel iPSC/860 hypercube and Intel Touchstone Delta machine. The quantitative effect of the various optimizations are demonstrated, and we show that the combined effect of these optimizations leads to roughly a factor of three performance improvement. The overall solution efficiency is compared with that obtained on the CRAY-YMP vector supercomputer.

Das, R.↗

An Integrated Software Architecture for Solar Cruiser Mission Design and Navigation

Solar Cruiser is a solar sailing mission, riding as a secondary payload to the Interstellar Mapping and Acceleration Probe (IMAP) mission, expected to launch in February of 2025. The Solar Cruiser vehicle will generate thrust via a complex, low-thrust solar sail. The extreme low-thrust nature of the solar sail will leave Solar Cruiser highly sensitive to external environmental effects (such as solar radiation pressure and high-order gravitational perturbations) throughout the entirety of flight. Because of this, preliminary & operational optimization routines must be intricately tied to high-order predictive propagation models to ensure the greatest possible confidence in mission success. The Solar Cruiser Mission Design and Navigation (MDNav) team has designed a software tool suite, employing the latest in software containerization technology, to accomplish this task, allowing for seamless development across several users and operating systems. Combining JPL’s Monte toolkit with high-performance optimizers written by researchers at the University of Alabama, the proposed architecture allows for instant verification of optimized trajectories within the same development environment that the optimization takes place, removing the need for mission designers and navigators to switch between tools. The MDNav software suite itself is separated from the development and operational scripts to be used in flight, which allows for maintaining a low-footprint version control profile – thus avoiding unnecessary file bloating. This paper discusses the historical differences between previous iterations of the Solar Cruiser MDNav tool suite and the current iteration, planned operational interfaces of the tool with other software and subsystems, and the planned path forward in maintaining containerization services for the software throughout the lifetime of Solar Cruiser.

Containerization↗

Optimizing Probability of Detection Point Estimate Demonstration

Probability of detection (POD) analysis is used in assessing reliably detectable flaw size in nondestructive evaluation (NDE). MIL-HDBK-18231and associated mh18232POD software gives most common methods of POD analysis. Real flaws such as cracks and crack-like flaws are desired to be detected using these NDE methods. A reliably detectable crack size is required for safe life analysis of fracture critical parts. The paper provides discussion on optimizing probability of detection (POD) demonstration experiments using Point Estimate Method. POD Point estimate method is used by NASA for qualifying special NDE procedures. The point estimate method uses binomial distribution for probability density. Normally, a set of 29 flaws of same size within some tolerance are used in the demonstration. The optimization is performed to provide acceptable value for probability of passing demonstration (PPD) and achieving acceptable value for probability of false (POF) calls while keeping the flaw sizes in the set as small as possible.

Koshti, Ajay M.↗

An Analytical Solution for Yaw Maneuver Optimization on the International Space Station and Other Orbiting Space Vehicles

This paper presents a new method for optimizing yaw maneuvers, which are the most common large maneuvers on the International Space Station (ISS). The goal of the maneuver optimization is to find a maneuver trajectory with minimal torques acting on the vehicle during the maneuver. Therefore, the thruster firings necessary to perform the maneuver are minimized. Reduction of thruster firings saves propellant and decreases structural loads and contamination of the vehicle critical elements, thus saving the service life of the thrusters and the vehicle itself. Equations describing the pitch and roll motion needed to counteract the major torques during a yaw maneuver are obtained. Also, a yaw rate profile is suggested. In the obtained optimized case, the torques are significantly reduced. The proposed approximate analytical solution does not require extensive computer resources and, therefore, can be implemented using software onboard the ISS. As a result, the maneuver execution will be automatic. This is one of the major benefits of the simplified solution presented in this paper with respect to existing computational approaches. The suggested maneuver optimization method can be used not only for the ISS, but for other space vehicles as well.

Dobrinskaya, Tatiana↗

Designing Rolling-Element Bearings

Bearing Analysis Tool (BAT) is a computer program for designing rolling-element bearings for cryogenic turbomachines. BAT provides a graphical user interface (GUI) that guides the entry of data to develop mathematical models of bearings. The GUI breaks model data into logical subsets that are entered through logic-driven input screens. The software generates a threedimensional graphical model of a bearing as the data are entered. Most dataentry errors become immediately obvious in the graphical model. BAT provides for storage of all the data on a shaft/bearing system, enabling the creation of a library of proven designs. Data from the library can be transferred to subsequent projects by use of simple cut-and-paste routines. BAT includes a library of temperature- dependent cryogenic bearing-material properties for use in the mathematical models. BAT implements algorithms that (1) enable the user to select combinations of design and/or operating-condition parameters, and then (2) automatically optimize the design by performing trade studies over all of the parameter combinations. This feature enables optimization over a large trade space in a fraction of the time taken when using prior bearingmodel software.

Moore, James D., Jr.↗

An Integrated Software Architecture for Solar Cruiser Mission Design and Navigation

Solar Cruiser is a solar sailing mission, riding as a secondary payload to the Interstellar Mapping and Acceleration Probe (IMAP) mission, expected to launch in February of 2025. The Solar Cruiser vehicle will generate thrust via a complex, low-thrust solar sail. The extreme low-thrust nature of the solar sail will leave Solar Cruiser highly sensitive to external environmental effects (such as solar radiation pressure and high-order gravitational perturbations) throughout the entirety of flight. Because of this, preliminary & operational optimization routines must be intricately tied to high-order predictive propagation models to ensure the greatest possible confidence in mission success. The Solar Cruiser Mission Design and Navigation (MDNav) team has designed a software tool suite, employing the latest in software containerization technology, to accomplish this task, allowing for seamless development across several users and operating systems. Combining JPL’s Monte toolkit with University of Alabama’s high-performance optimizer, ASSET, the proposed architecture allows for instant verification of optimized trajectories within the same development environment that the optimization takes place, removing the need for mission designers and navigators to switch between tools. The MDNav software suite itself is separated from the development and operational scripts to be used in flight, which allows for maintaining a low-footprint version control profile – thus avoiding unnecessary file bloating. This paper discusses the historical differences between previous iterations of the Solar Cruiser MDNav tool suite and the current iteration, planned operational interfaces of the tool with other software and subsystems, and the planned path forward in maintaining containerization services for the software throughout the lifetime of Solar Cruiser.

solar cruiser↗

Compact Video Microscope Imaging System Implemented in Colloid Studies

Long description Photographs showing fiber-optic light source, microscope and charge-coupled discharge (CCD) camera head connected to camera body, CCD camera body feeding data to image acquisition board in PC, and Cartesian robot controlled via PC board. The Compact Microscope Imaging System (CMIS) is a diagnostic tool with intelligent controls for use in space, industrial, medical, and security applications. CMIS can be used in situ with a minimum amount of user intervention. This system can scan, find areas of interest in, focus on, and acquire images automatically. Many multiple-cell experiments require microscopy for in situ observations; this is feasible only with compact microscope systems. CMIS is a miniature machine vision system that combines intelligent image processing with remote control. The software also has a user-friendly interface, which can be used independently of the hardware for further post-experiment analysis. CMIS has been successfully developed in the SML Laboratory at the NASA Glenn Research Center and adapted for use for colloid studies and is available for telescience experiments. The main innovations this year are an improved interface, optimized algorithms, and the ability to control conventional full-sized microscopes in addition to compact microscopes. The CMIS software-hardware interface is being integrated into our SML Analysis package, which will be a robust general-purpose image-processing package that can handle over 100 space and industrial applications.

McDowell, Mark↗

Design of a developmental dual fail operational redundant strapped down inertial measurement unit

An experimental redundant strap-down inertial measurement unit (RSDIMU) is being developed at NASA-Langley as a link to satisfy safety and reliability considerations in the integrated avionics concept. The unit consists of four two-degrees-of-freedom (TDOF) tuned-rotor gyros, and four TDOF pendulous accelerometers in a skewed and separable semi-octahedron array. The system will be used to examine failure detection and isolation techniques, redundancy management rules, and optimal threshold levels for various flight configurations. The major characteristics of the RSDIMU hardware and software design, and its use as a research tool are described.

Morrell, F. R.↗

Doppler lidar wind measurement on Eos

A polar-orbiting platform segment of the Earth Observing System (EOS) could carry a CO2-laser based Doppler lidar for recording global wind profiles. Development goals would include the manufacture of a 10 J laser with a 2 yr operational life, space-rating the optics and associated software, and the definition of models for global aerosol distributions. Techniques will be needed for optimal scanning and generating computer simulations which will provide adequately accurate weather predictions.

Fitzjarrald, D.↗

The use of UNIX in a real-time environment

This paper describes a project to evaluate the feasibility of using commercial off-the-shelf hardware and the UNIX operating system, to implement a real-time control and monitor system. A functional subset of the Checkout, Control and Monitor System was chosen as the test bed for the project. The project consists of three separate architecture implementations: a local area bus network, a star network, and a central host. The motivation for this project stemmed from the need to find a way to implement real-time systems, without the cost burden of developing and maintaining custom hardware and unique software. This has always been accepted as the only option because of the need to optimize the implementation for performance. However, with the cost/performance of today's hardware, the inefficiencies of high-level languages and portable operating systems can be effectively overcome.

Luken, R. D.↗

The Spartan attitude control system - Ground support computer

The Spartan Attitude Control System (ACS) contains a command and control computer. This computer is optimized for the activities of the flight and contains very little human interface hardware and software. The computer system provides the technicians testing of Spartan ACS with a convenient command-oriented interface to the flight ACS computer. The system also decodes and time tags data automatically sent out by the flight computer as key events occur. The duration and magnitude of all system maneuvers is also derived and displayed by this system. The Ground Support Computer is also the primary Ground Support Equipment for the flight sequencer which controls all payload maneuvers, and long term program timing.

Schnurr, R. G., Jr.↗

Runway exit designs for capacity improvement demonstrations. Phase 2: Computer model development

The development is described of a computer simulation/optimization model to: (1) estimate the optimal locations of existing and proposed runway turnoffs; and (2) estimate the geometric design requirements associated with newly developed high speed turnoffs. The model described, named REDIM 2.0, represents a stand alone application to be used by airport planners, designers, and researchers alike to estimate optimal turnoff locations. The main procedures are described in detail which are implemented in the software package and possible applications are illustrated when using 6 major runway scenarios. The main output of the computer program is the estimation of the weighted average runway occupancy time for a user defined aircraft population. Also, the location and geometric characteristics of each turnoff are provided to the user.

Trani, A. A.↗