Search NASA⌕ Search

SEARCH · Search NASA

Results for “source models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Carbon Dioxide Dispersion in the Combustion Integrated Rack Simulated Numerically

When discharged into an International Space Station (ISS) payload rack, a carbon dioxide (CO2) portable fire extinguisher (PFE) must extinguish a fire by decreasing the oxygen in the rack by 50 percent within 60 sec. The length of time needed for this oxygen reduction throughout the rack and the length of time that the CO2 concentration remains high enough to prevent the fire from reigniting is important when determining the effectiveness of the response and postfire procedures. Furthermore, in the absence of gravity, the local flow velocity can make the difference between a fire that spreads rapidly and one that self-extinguishes after ignition. A numerical simulation of the discharge of CO2 from PFE into the Combustion Integrated Rack (CIR) in microgravity was performed to obtain the local velocity and CO2 concentration. The complicated flow field around the PFE nozzle exits was modeled by sources of equivalent mass and momentum flux at a location downstream of the nozzle. The time for the concentration of CO2 to reach a level that would extinguish a fire anywhere in the rack was determined using the Fire Dynamics Simulator (FDS), a computational fluid dynamics code developed by the National Institute of Standards and Technology specifically to evaluate the development of a fire and smoke transport. The simulation shows that CO2, as well as any smoke and combustion gases produced by a fire, would be discharged into the ISS cabin through the resource utility panel at the bottom of the rack. These simulations will be validated by comparing the results with velocity and CO2 concentration measurements obtained during the fire suppression system verification tests conducted on the CIR in March 2003. Once these numerical simulations are validated, portions of the ISS labs and living areas will be modeled to determine the local flow conditions before, during, and after a fire event. These simulations can yield specific information about how long it takes for smoke and combustion gases produced by a fire to reach a detector location, how large the fire would be when the detector alarms, and the behavior of the fire until it has been extinguished. This new capability could then be used to optimize the location of fire detectors and fire-suppression ports as well as to evaluate the effectiveness of fire suppressants and response strategies. Numerical data collected from these simulations could also be used to develop a virtual reality fire event for crew training and fire safety awareness. This work is funded by NASA's Bioastronautics Initiative, which has the objective of ensuring and enhancing the health, safety, and performance of humans in space. As part of this initiative, the Microgravity Combustion Science Branch at the NASA Glenn Research Center is conducting spacecraft fire safety research to significantly improve fire safety on inhabited spacecraft.

Wu, Ming-Shin↗

An Empirical State Error Covariance Matrix for Batch State Estimation

State estimation techniques serve effectively to provide mean state estimates. However, the state error covariance matrices provided as part of these techniques suffer from some degree of lack of confidence in their ability to adequately describe the uncertainty in the estimated states. A specific problem with the traditional form of state error covariance matrices is that they represent only a mapping of the assumed observation error characteristics into the state space. Any errors that arise from other sources (environment modeling, precision, etc.) are not directly represented in a traditional, theoretical state error covariance matrix. Consider that an actual observation contains only measurement error and that an estimated observation contains all other errors, known and unknown. It then follows that a measurement residual (the difference between expected and observed measurements) contains all errors for that measurement. Therefore, a direct and appropriate inclusion of the actual measurement residuals in the state error covariance matrix will result in an empirical state error covariance matrix. This empirical state error covariance matrix will fully account for the error in the state estimate. By way of a literal reinterpretation of the equations involved in the weighted least squares estimation algorithm, it is possible to arrive at an appropriate, and formally correct, empirical state error covariance matrix. The first specific step of the method is to use the average form of the weighted measurement residual variance performance index rather than its usual total weighted residual form. Next it is helpful to interpret the solution to the normal equations as the average of a collection of sample vectors drawn from a hypothetical parent population. From here, using a standard statistical analysis approach, it directly follows as to how to determine the standard empirical state error covariance matrix. This matrix will contain the total uncertainty in the state estimate, regardless as to the source of the uncertainty. Also, in its most straight forward form, the technique only requires supplemental calculations to be added to existing batch algorithms. The generation of this direct, empirical form of the state error covariance matrix is independent of the dimensionality of the observations. Mixed degrees of freedom for an observation set are allowed. As is the case with any simple, empirical sample variance problems, the presented approach offers an opportunity (at least in the case of weighted least squares) to investigate confidence interval estimates for the error covariance matrix elements. The diagonal or variance terms of the error covariance matrix have a particularly simple form to associate with either a multiple degree of freedom chi-square distribution (more approximate) or with a gamma distribution (less approximate). The off diagonal or covariance terms of the matrix are less clear in their statistical behavior. However, the off diagonal covariance matrix elements still lend themselves to standard confidence interval error analysis. The distributional forms associated with the off diagonal terms are more varied and, perhaps, more approximate than those associated with the diagonal terms. Using a simple weighted least squares sample problem, results obtained through use of the proposed technique are presented. The example consists of a simple, two observer, triangulation problem with range only measurements. Variations of this problem reflect an ideal case (perfect knowledge of the range errors) and a mismodeled case (incorrect knowledge of the range errors).

Frisbee, Joseph H., Jr.↗

Comparison of aircraft noise measured in flight test and in the NASA Ames 40- by 80-foot wind tunnel.

A method to determine free-field aircraft noise spectra from wind-tunnel measurements has been developed. The crux of the method is the correction for reverberations. Calibrated loud speakers are used to simulate model sound sources in the wind tunnel. Corrections based on the difference between the direct and reverberant field levels are applied to wind-tunnel data for a wide range of aircraft noise sources. To establish the validity of the correction method, two research aircraft - one propeller-driven (YOV-10A) and one turbojet-powered (XV-5B) - were flown in free field and then tested in the wind tunnel. Corrected noise spectra from the two environments agree closely.

Atencio, A., Jr.↗

Genesis of the Angra dos Reis and other achondritic meteorites

Major, minor, and trace element abundances were determined in seven Angra dos Reis samples, which included whole rocks, fassaite (clinopyroxene), olivine, and whitlockite separates, via sequential instrumental neutron activation analysis. The rare earth element abundance patterns and the trace element abundance patterns of this achondritic meteorite are discussed. A two-stage crystal-liquid fractionation model with source material containing olivine, orthopyroxene, and clinopyroxine is presented for the genesis of Angra dos Reis. Multilinear regression analysis was used to estimate possible composition and properties of the parent magmas. Angra dos Reis was compared with other achondrites, cumulate eucrites and nakhlites in particular. It is thought that the unique Angra dos Reis could not be related to those achondrites by crystal-liquid fractionation of the same parent body.

Ma, M.-S.↗

A distance limit for a class of model gamma-ray burst sources

Gamma ray burst sources are presumably not larger than 10 to the 9th power cm as inferred from observed flux variations. If they are homogeneous and isotropically radiating, then from photon density considerations, they would have to be optically thick due to gamma-gamma pair production when assumed to be too far away. Deviations of observed photo spectra from an exponential shape around 1 MeV lead to an upper limit of the possible distance of such sources of only 2 kpc from the sun. Thus the sources must be galactic unless the radiation is highly beamed or emerges from a relativistically moving shell. This conclusion depends only on observed parameters. The possible presence of particles and fields in the sources would require them to be even closer.

Schmidt, W. K. H.↗

Verification results for the Spectral Ocean Wave Model (SOWM) by means of significant wave height measurements made by the GEOS-3 spacecraft

Significant wave heights estimated from the shape of the return pulse wave form of the altimeter on GEOS-3 for forty-four orbit segments obtained during 1975 and 1976 are compared with the significant wave heights specified by the spectral ocean wave model (SOWM), which is the presently operational numerical wave forecasting model at the Fleet Numerical Weather Central. Except for a number of orbit segments with poor agreement and larger errors, the SOWM specifications tended to be biased from 0.5 to 1.0 meters too low and to have RMS errors of 1.0 to 1.4 meters. The much fewer larger errors can be attributed to poor wind data for some parts of the Northern Hemisphere oceans. The bias can be attributed to the somewhat too light winds used to generate the waves in the model. Other sources of error are identified in the equatorial and trade wind areas.

Pierson, W. J.↗

Gamma ray lines from novae

Activities identify the mechanisms responsible for the eruptions characterizing cataclysmic variables are concerned with close binary systems, the properties of which are dominated by the presence of mass transfer from a late-type star onto a white dwarf via an accretion disk. Theories for the outbursts vary in their identification of the eruption mechanism with either gravitational or nuclear energy sources. Existing models for the dwarf novae invoke a dynamical instability in the envelope of the red star which triggers episodic Roche lobe overflow and a concomitant increase in the rate of mass transfer and the outbursts are associated with an increase in the accretion luminosity liberated in the disk. The most successful theoretical models for common nova events involve thermonuclear runaways proceeding in accreted hydrogen envelopes on the white dwarf components of these systems. The characteristics of such runaway events, which can give rise to detectable gamma ray fluxes are discussed. Salient features of existing runaway models are reviewed. Gamma fluxes from Na-22 decay, positron annihilation, and shock induction are predicted.

Truran, J. W.↗

A model for dispersion from area sources in convective turbulence

Four independent estimates of the vertical distribution of the eddy coefficient for dispersion of a passive contaminant from an extensive area source in a convective layer have been presented. The estimates were based on the following methods: (1) a second-order closure prediction, (2) field data of pollutant concentrations over Los Angeles, (3) lab measurements of particle dispersion, and (4) assumption of equality between momentum and mass transfer coefficients in the free convective limit. It is suggested that K-values estimated both from second-order closure theory and from Los Angeles measurements are systematically underestimated.

Crane, G.↗

Distance limit for a class of model gamma-ray burst sources

It is pointed out that MeV photons have actually been observed in bursts. These observations imply that the nonrelativistic sources cannot be further away than a few kpc from the sun and, therefore, must be galactic. The 27 April 1972 event observed by Apollo 16 shows at higher energies a power law spectrum with a possible line feature around 4 MeV. The optical depth of a homogeneous, isotropic radiation field is estimated with the aid of formulae used by Nikishov (1962) and Jauch and Rohrlich (1955). On the basis of an investigation of the various factors involved, it is tentatively suggested that the gamma-ray bursts which have been detected are galactic, but are in the majority of the cases not connected with unique irreversible star transformation. It appears also unlikely that the gamma-ray bursts are connected with galactic novae.

Schmidt, W. K. H.↗

New limits on gamma-ray bursts

Two balloon flights of large-area scintillation crystal detector arrays indicate that the rate of weak gamma-ray bursts is significantly below that expected from a uniform distribution of burst sources. This result, combined with the data from stronger bursts, gives strong evidence for a galactic confinement of burst sources. Reasonable models of confinement limit the intrinsic radiated energy per burst to the order of 10 to the (39th to 41st power) ergs.

Fishman, G. J.↗

Statistical considerations in design of spacelab experiments

After making an analysis of experimental error sources, statistical models were developed for the design and analysis of potential Space Shuttle experiments. Guidelines for statistical significance and/or confidence limits of expected results were also included. The models were then tested out on the following proposed Space Shuttle biomedical experiments: (1) bone density by computer tomography; (2) basal metabolism; and (3) total body water. Analysis of those results and therefore of the models proved inconclusive due to the lack of previous research data and statistical values. However, the models were seen as possible guides to making some predictions and decisions.

Robinson, J.↗

The magnetization of the lunar crust as deduced from orbital surveys

A two-dimensional magnetic anomaly map of a region of intense crustal magnetization near Van de Graaff crater has been constructed from Apollo 15 and 16 subsatellite vector magnetometer observations. The mapping method used limits coverage to relatively low altitudes (65-80 km) over the Van de Graaff region along the Apollo 15 track and over the central far side highlands along the Apollo 16 track; a simple differencing technique was used to remove external noise contributions. An approximate inversion of this map using a surface plate model for source region geometry has revealed at least four different sources. No correlation between the lateral locations of these source regions and surface morphology was found; the directions of magnetization seem to be unrelated except for a strong north-south depletion. A rough antipodal correlation of the two most strongly magnetized regions yet mapped on the moon with the Imbrium and Orientale basins gives mild support to the ejecta deposit hypothesis suggested by Strangway et al. (1973) for formation of anomaly source regions.

Hood, L. L.↗

A unique coannular plug nozzle jet noise prediction procedure

The work presents a method for predicting jet mixing and shock noise spectra from coannular plug nozzles operated in the inverted velocity profile mode. It is shown that the jet mixing noise prediction method is based on the physics of the flow and its noise radiating characteristics, modeling the source spectrum, eddy convection, and fluid shrouding in a simplistic fashion. Further, the shock noise prediction procedure is described, noting that it is an extension of the Fisher-Harper-Bourne method for conical nozzles. Finally, it is concluded that the method has the potential of being extended to suppressors of complex geometries.

Bhutiani, P. K.↗

An experimental study of transmission, reflection and scattering of sound in a free jet flight simulation facility and comparison with theory

When a free jet (or open jet) is used as a wind tunnel to simulate the effects of flight on model noise sources, it is necessary to calibrate out the effects of the free jet shear layer on the transmitted sound, since the shear layer is absent in the real flight case. In this paper, a theoretical calibration procedure for this purpose is first summarized; following this, the results of an experimental program, designed to test the validity of the various components of the calibration procedure, are described. The experiments are conducted by using a point sound source located at various axial positions within the free jet potential core. By using broadband excitation and cross-correlation methods, the angle changes associated with ray paths across the shear layer are first established. Measurements are then made simultaneously inside and outside the free jet along the proper ray paths to determine the amplitude changes across the shear layer. It is shown that both the angle and amplitude changes can be predicted accurately by theory. It is also found that internal reflection at the shear layer is significant only for large ray angles in the forward quadrant where total internal reflection occurs. Finally, the effects of sound absorption and scattering by the shear layer turbulence are also examined experimentally.

Ahuja, K. K.↗