Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Crystal Structures of Diaryl Hydrazone and Sulfone Stabilizers in Complex with an Amyloidogenic Light Chain Reveal an Alternate Ligand‐Binding Cavity

Abstract Stabilization of amyloidogenic immunoglobulin light chains (LCs) by binding of small molecule “kinetic stabilizers” is under development as a novel treatment for light chain amyloidosis. From a high‐throughput screen, we previously identified 16 full‐length (FL) LC stabilizers from five distinct chemotypes. We then obtained structural biological information on two classes of hits, coumarins and hydantoins, revealing that both chemotypes bind to a pocket at the V L −V L interface of the FL LC dimer. Here, we report crystal structures of three screening hits from two other chemotypes, diaryl hydrazones and sulfones, in complex with an amyloidogenic FL LC. While two of these hits bind to the previously identified pocket, one diaryl hydrazone binds to a different pocket bisected by the C 2 symmetry axis of the dimer. These data further expand on the FL LC stabilizer‐binding surface that could be used in design of more potent FL LC aggregation inhibitors.

Chemistry↗

Theoretical and experimental investigation of geometry and stability of small potassium‐iodide KnI(n=2–6) clusters

Small heterogeneous potassium-iodide clusters are investigated by means of ab initio electronic structural methods together with experimental production and detection in mass spectrometry. Experiments were done by using Knudsen cell mass spectrometry (KCMS) modification method, which provided simultaneous generating of all KnI0,+1 (n = 2–6) clusters at once. Clusters with more than two potassium atoms are produced for the first time. The lowest lying isomers of those KnI0,+1 (n = 2–6) clusters were found by using a random-kick procedure. The best description of growth of these clusters is the addition of one potassium atom to a smaller-neighbor cluster. Subsequently, stability of these species was examined. In spite of general trend of decreasing of binding energies, the closed-shell species have slightly larger stability with respect to the open-shell species. Alternation of dissociation energies between closed-shell and open-shell clusters is presented. Experimental setup also allows determination of ionization energies of clusters: the obtained values are in the range of 3.46–3.98 eV, which classify these clusters as “superalkali.” For closed-shell clusters, the theoretical adiabatic ionization energies are close to experimental values, whereas in the case of open-shell clusters, the vertical ionization energies are those that are close to experimental values. © 2019 Wiley Periodicals, Inc.

60 APPLIED LIFE SCIENCES↗

Atomic- and Molecular-Scale Interphase Engineering for High-Performance Solid-State Batteries

Solid-state batteries (SSBs) promise a decisive advance beyond conventional Li-ion systems, yet their development remains constrained by persistent solid–solid interfacial instabilities that degrade performance and durability. Interfaces between solid electrolytes and both cathodes and Li metal often exhibit poor wettability, limited physical contact, and high charge–transfer resistance, leading to chemical decomposition, mechanical failure, and impedance growth. Overcoming these limitations requires interphase engineering with atomic-scale precision—capabilities that conventional coating methods cannot reliably deliver. Atomic layer deposition (ALD) and molecular layer deposition (MLD) uniquely meet this need by enabling ultrathin, conformal, and composition-tunable films that stabilize reactive surfaces, suppress parasitic reactions, and regulate Li-metal morphology. Importantly, this Perspective highlights ALD/MLD systems that have already demonstrated effectiveness in liquid-electrolyte cells and discusses how these validated strategies can be deliberately translated to solid-state architectures. By grounding future directions in experimentally proven concepts rather than speculative hypotheses, we outline how atomic- and molecular-scale design principles can accelerate the development of robust, high-performance SSB technologies.

atomic and molecular layer deposition↗

Multifunctional polymer dispersions for biomedical assays obtained by heterophase radical polymerization

Methods for the preparation of multifunctional dispersions of polymer particles (DPP) in the course of free radical heterophase polymerization, which provides careful control of both macromolecular and colloidal properties, are considered. Approaches that, according to the polymerization technique, make it possible to control the particle diameter and shape, particle size distribution, colloidal stability, morphology, surface chemistry and functionality, as well as the formation of organo-inorganic hybrid particles, are demonstrated. The possibilities of DPP application in homogeneous and heterogeneous assays and cell labelling are reviewed. The use of DPP leads to decrease the reaction scales and costs and to increase the speed, sensitivity, selectivity, and reproducibility of assays.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A numerical study of the effect of different aerosol types on East Asian summer clouds and precipitation

The impact of anthropogenic aerosol on the East Asian summer monsoon (EASM) is investigated with NCAR CAM5, a state-of-the-art climate model with aerosol’s direct and indirect effects. Results indicate that anthropogenic aerosol tends to cause a weakened EASM with a southward shift of precipitation in East Asia mostly by its radiative effect. Anthropogenic aerosol induced surface cooling stabilizes the boundary layer, suppresses the convection and latent heat release in northern China, and reduces the tropospheric temperature over land and land-sea thermal contrast, thus leading to a weakened EASM. Meanwhile, acting as cloud condensation nuclei (CCN), anthropogenic aerosol can significantly increase the cloud droplet number concentration but decrease the cloud droplet effective radius over Indochina and Indian Peninsulas as well as over southwestern and northern China, inhibiting the precipitation in these regions. Thus, anthropogenic aerosol tends to reduce Southeast and South Asian summer monsoon precipitation by its indirect effect.

Jiang, Yiquan↗

The effect of surface charge on the thermal stability and ice recrystallization inhibition activity of antifreeze protein III (AFP III)

Highlights: • Chemical cationization improves thermal stability of antifreeze protein III. • Cationic antifreeze protein III retains ice recrystallization inhibition activity. • Synchrotron radiation circular dichroism investigation of antifreeze protein III. The aim of this study was to examine the effect of chemical cationization on the structure and function of antifreeze protein III (AFP III) over an extreme temperature range (−40°C to +90°C) using far-UV synchrotron radiation circular dichroism (SRCD) and ice recrystallization inhibition (IRI) assays. Chemical cationization was able to produce a modified AFP III with a net cationic charge at physiological pH that had enhanced resistance to denaturation at elevated temperatures, with no immediate negative impact on protein structure at subzero temperatures. Furthermore, cationized AFP III retained an IRI activity similar to that of native AFP III. Consequently, chemical cationization may provide a pathway to the development of more robust antifreeze proteins as supplementary cryoprotectants in the cryopreservation of clinically relevant cells.

60 APPLIED LIFE SCIENCES↗

Rheological requirements for printable concretes

We study in this paper the rheological requirements for printable concrete in terms of yield stress, viscosity, elastic modulus, critical strain, and structuration rate. We first discuss the extrusion/deposition process at the level of the nozzle from a material perspective. We then focus on the rheological requirements needed to prevent the flow of one layer or the strength-based failure of the rising printed element. We moreover discuss the rheological requirements needed to control the final geometrical dimensions of one layer and of the entire object, including buckling stability and surface cracking. We finally describe the requirement for a proper intermixing of the layers interface and also note that drying of the upper surface of the layer at rest could also play a major role on the interlayer bond. Finally, we evaluate the effect of the use of printing supports (i.e. non-direct printing) on the above rheological requirements.

36 MATERIALS SCIENCE↗

Structure-Guided Identification of Resistance Breaking Antimalarial N -Myristoyltransferase Inhibitors

The attachment of myristate to the N-terminal glycine of certain proteins is largely a co-translational modification catalyzed by N-myristoyltransferase (NMT), and involved in protein membrane-localization. Pathogen NMT is a validated therapeutic target in numerous infectious diseases including malaria. In Plasmodium falciparum , NMT substrates are important in essential processes including parasite gliding motility and host cell invasion. Here, we generated parasites resistant to a particular NMT inhibitor series and show that resistance in an in vitro parasite growth assay is mediated by a single amino acid substitution in the NMT substrate-binding pocket. The basis of resistance was validated and analyzed with a structure-guided approach using crystallography, in combination with enzyme activity, stability, and surface plasmon resonance assays, allowing identification of another inhibitor series unaffected by this substitution. We suggest that resistance studies incorporated early in the drug development process help selection of drug combinations to impede rapid evolution of parasite resistance.

59 BASIC BIOLOGICAL SCIENCES↗

Removable coatings: Thermal stability and decontamination of steel surfaces from 241 Am

This study presents a comparative analysis of several strippable materials for decontamination of steel surfaces from 241 Am. The strippable coatings were chosen to have a history of application, to be commercially available, easily handled and have different composition and formulation. Carbon steel and stainless steel surfaces (coupons) were utilized as the most representative industrial materials, and the experimental series were expanded to include the rusting treatment of these surfaces as it is common for decommissioned old nuclear facilities. The experiments followed the path of pre-screening of the strippable materials (easiness of application, peeling etc.), their characterization with Fourier-transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA), decontamination factors (DF) or removal efficiencies for different types of steel surfaces, and enhancement of the removal efficiencies of the select strippable coatings via amendment with EDTA. As a result, DF and removal efficiencies for stainless steel (both pristine and with rusting treatment) are higher than for pristine carbon steel, and decontamination factors and removal efficiencies are higher for pristine than for rusted carbon steel across all the coatings. It is also shown that EDTA amendment can improve DF and removal efficiency for a strippable coating (i.e., CC Strip), however other factors should also be considered. Thus, the coating CC Strip exhibited easiness in handling and high DF (up to 97% when EDTA-amended), but its drying period was the longest among the rest of the materials and its thermal decomposition indicates on a risk of intense release of heat in case of a fire event.

36 MATERIALS SCIENCE↗

A review of computational modeling techniques in study and design of shape memory ceramics

Shape memory ceramics are a unique family of shape memory materials with a wide variety of applications, such as ultra-high energy dissipation and high-temperature actuation. Along with significant progress in the experimental study of zirconia-based shape memory ceramics in recent years, computational simulations have exhibited powerful capabilities in revealing nano/microstructure-dependent deformation and failure mechanisms in these materials. In this work, we review the recent progress in understanding the phase transformation behavior in shape memory ceramics, focusing on computational modeling of zirconia-based ceramics. Electronic structure calculations have provided new data on the phase stability and surface properties of shape memory ceramics. At the nanometer length scale, molecular dynamics simulations have captured fundamental information about martensitic phase transformation and the effects of grain boundaries and defects on mechanical response of bi- and polycrystalline zirconia-based ceramics. At the micrometer length scale, advanced phase-field models have shown the ability to predict morphological evolution of microstructures and the corresponding mechanical responses in good agreement with experimental observations. Despite the recent multiscale computational advancements, further developments are required to establish processing-structure-property-performance relations that will lead to reliable and practical strategies for designing zirconia-based (or other) ceramics with improved and sustained shape memory responses. This article critically reviews current computational modeling techniques and provides an outlook for the study and design of the next generation of shape memory ceramics.

36 MATERIALS SCIENCE↗

A facile cathode design combining Ni-rich layered oxides with Li-rich layered oxides for lithium-ion batteries

A facile synthesis method was developed to prepare xLi 2 MnO 3 ·(1-x)LiNi 0.7 Co 0.15 Mn 0.15 O 2 (x = 0, 0.03, 0.07, 0.10, 0.20, and 0.30 as molar ratio) cathode materials, combining the advantages of high specific capacity from Ni-rich layered phase and surface chemical stability from Li-rich layered phase. X-ray diffraction (XRD), high resolution transmission electron microscope (HRTEM) and electrochemical charge/discharge performance confirm the formation of a Li-rich layered phase with C2/m symmetry. Most importantly, high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) reveals a spatial relationship that Li-rich nano-domain islands are integrated into a conventional Ni-rich layered matrix (R$\bar{3}$m). This is the first time that Li-rich phase has been directly observed inside a particle at the nano-scale, when the overall composition of layered compounds (Li 1+δ Ni x Mn y M 1-x-y-δ O 2 , M refers to transition metal elements) is Ni-rich (x > 0.5) rather than Mn-rich (y > 0.5). Remarkably, xLi 2 MnO 3 ·(1-x)LiNi 0.7 Co 0.15 Mn 0.15 O 2 cathode with optimized x value shows superior electrochemical performance at C/3, i.e., 170 mA h g -1 with 90.3 % of capacity retention after 400 cycles at 25 °C and 164 mA h g -1 with 81.3 % capacity retention after 200 cycles at 55 °C.

25 ENERGY STORAGE↗

Synthesis, particle shape characterization, magnetic properties and surface modification of superparamagnetic iron oxide nanochains

We report monodisperse, chain-like particles (nanochains) consisted of silica-coated maghemite (γ-Fe2O3) nanoparticle clusters prepared by colloidal chemistry and magnetic field-induced self-assembly of nanoparticle clusters. In order to quantify the shapes of chain-like particles, we have used the measure for shape convexity which is also called solidity. We functionalize the surface of the nanochains with amino (–NH2) and carboxyl groups (–COOH) in order to modify surface charge. These surfaces of nanochains provide better colloidal stability and their potential for practical applications in biomedicine. The enhanced colloidal stability of the surface modified nanochains is confirmed by Zeta potential (ζ-potential) analysis. Magnetic properties of the nanochains show superparamagnetic state at room temperature since the nanochains are composed of tiny nanoparticles as their building blocks. The measured M(H) data at room temperature have been successfully fitted by the Langevin function and magnetic moment μp = 20,526 μB for sphere-like nanoparticle clusters and μp = 20,767 μB for nanochains are determined. The determined magnetic parameters have revealed that the nanochains show a magnetic moment of the nanoparticles higher than the one of individual nanoparticle clusters. These differences can be attributed to the collective magnetic properties of superparamagnetic iron oxide nanoparticles (SPION) assembled in different morphologies (isotropic and anisotropic morphology). © 2018.

60 APPLIED LIFE SCIENCES↗

Detection of electronically equivalent tautomers of adenine base: DFT study

Graphical abstract: - Highlights: • DFT calculations have been performed on adenine and its rare tautomer Cu{sup 2+} complexes. • Interaction of A-Cu{sup 2+} and rA-Cu{sup 2+} complexes with AlN modified fullerene (C{sub 60}) have been studied briefly. • It is found that AlN modified C{sub 60} could be used as a nanoscale sensor to detect these two A-Cu{sup 2+} and rA-Cu{sup 2+} complexes. - Abstract: In the present study, quantum chemical calculations were carried out to investigate the electronic structures and stabilities of adenine and its rare tautomer along with their Cu{sup 2+} complexes. Density Functional Theory (B3LYP method) was used in all calculations. The two Cu{sup 2+} complexes of adenine have almost similar energies and electronic structures; hence, their chemical differentiation is very difficult. For this purpose, interactions of these complexes with AlN modified fullerene (C{sub 60}) have been studied. Theoretical investigations reveal that AlN-doped C{sub 60} may serve as a potentially viable nanoscale sensor for detection of the two Cu{sup 2+} complexes of adenine.

36 MATERIALS SCIENCE↗

Al-doped ZnS shell as a surface shield for enhancing the stability of Cu:ZnInS/ZnS/ZnS:Al quantum dots and their application in light emitting diodes

Graphical abstract: The normalized electroluminescence spectra of Cu:ZnInS@ZnS:Al (a) and Cu:ZnInS@ZnS quantum dot based LEDs under an injection current of 10 mA for various operation times are presented. The quantum dots were mixed with same amount of silicone resin and treated at 50 °C for 30 min. - Highlights: • The self-passivated Cu:ZnInS@ZnS:Al quantum dots were synthesized successfully. • The thermal and current stability of Cu:ZnInS@ZnS:Al quantum dots were improved. • The Cu:ZnInS@ZnS:Al quantum dots had a small reduction of 20% in PL lifetime under thermal annealing from 50 °C to 250 °C. • The Cu:ZnInS@ZnS:Al quantum dot based LED had a 3% luminescence enhancement under 10 mA injection current for a long time. - Abstract: Cu:ZnInS/ZnS/ZnS:Al quantum dots (QDs) with a Cu-doped inner core and an Al-doped outer shell were synthesized in this work, exhibiting improved stability of luminescence, compared with Cu:ZnInS/ZnS/ZnS QDs. The X-ray diffraction patterns and photoluminescence spectra confirmed that the Al ions were doped into the ZnS shell. The stability of Cu:ZnInS/ZnS/ZnS:Al QDs under various thermal annealing temperatures was studied by steady-state and time resolved photoluminescence spectroscopy. The Cu:ZnInS/ZnS/ZnS:Al QDs had a relatively small reduction of 20% in photoluminescence lifetime from 167 ns under thermal annealing at 50 °C to 132.8 ns at 250 °C, compared to a 55% drop for the undoped ones, indicating less thermal effect on the photoluminescence of the QDs with an Al-doped shell. The Cu:ZnInS/ZnS/ZnS:Al QD-based light emitting diodes (LEDs) had a 3% luminescence enhancement under injection current of 10 mA for 30 h, compared to a 13% reduction for the undoped QDs, suggesting improved thermal stability of photoluminescence for the QDs with Al-doped shell. Finally, Cu:ZnInS/ZnS/ZnS:Al QD-based white LEDs with good color rendering index (>80) and correlated color temperature (<4500 K) were fabricated by combining with green emitting CuInS{sub 2}/ZnS QDs. The self-passivated QDs show promises for enhancing thermal stability of QD-based LEDs in the conserved energy lighting industry.

36 MATERIALS SCIENCE↗

Effects of developmental exposure to perfluorooctanoic acid (PFOA) on long bone morphology and bone cell differentiation

Perfluorooctanoic acid (PFOA) is a ubiquitous and persistent environmental chemical, which has been used extensively due to its stability and surface tension-lowering properties. Toxicological effects include induction of neonatal mortality and reproductive toxicity. In this study, pregnant C57BL/6 mice were exposed orally to 0.3 mg PFOA/kg/day throughout pregnancy, and female offspring were studied at the age of 13 or 17 months. Morphometrical and biomechanical properties of femurs and tibias were analyzed with micro-computed tomography and 3-point bending, and bone PFOA concentrations were determined by mass spectrometry. The effects of PFOA on bone cell differentiation were studied in osteoclasts from C57BL/6 mice and in the MC3T3 pre-osteoblast cell line. PFOA exposed mice showed increased femoral periosteal area as well as decreased mineral density of tibias. Biomechanical properties of these bones were not affected. Bone PFOA concentrations were clearly elevated even at the age of 17 months. In osteoblasts, low concentrations of PFOA increased osteocalcin (OCN) expression and calcium secretion, but at PFOA concentrations of 100 μM and above osteocalcin (OCN) expression and calcium secretion were decreased. The number of osteoclasts was increased at all PFOA concentrations tested and resorption activity dose-dependently increased from 0.1–1.0 μM, but decreased at higher concentrations. The results show that PFOA accumulates in bone and is present in bones until the old age. PFOA has the potential to influence bone turnover over a long period of time. Therefore bone is a target tissue for PFOA, and altered bone geometry and mineral density seem to persist throughout the life of the animal. - Highlights: • Bone is a target tissue for PFOA both in vivo and in vitro. • Maternal exposure during pregnancy results in PFOA accumulation in bone of the offspring. • PFOA is present in bones until the old age. • PFOA causes mild alterations in bone morphometry and decreases bone mineral density. • Low PFOA concentrations stimulate the resorption activity of osteoclasts.

60 APPLIED LIFE SCIENCES↗