Search NASA⌕ Search

SEARCH · Search NASA

Results for “technology specification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Pyroelectric detectors

The multi-agency, long-term Global Change programs, and specifically NASA's Earth Observing system, will require some new and advanced photon detector technology which must be specifically tailored for long-term stability, broad spectral range, cooling constraints, and other parameters. Whereas MCT and GaAs alloy based photovoltaic detectors and detector arrays reach most impressive results to wavelengths as long as 12 microns when cooled to below 70 K, other materials, such as ferroelectrics and pyroelectrics, appear to offer special opportunities beyond 12 microns and above 70 K. These materials have found very broad use in a wide variety of room temperature applications. Little is known about these classes of materials at sub-room temperatures and no photon detector results have been reported. From the limited information available, researchers conclude that the room temperature values of D asterisk greater than or equal to 10(exp 9) cm Hz(exp 1/2)/W may be improved by one to two orders of magnitude upon cooling to temperatures around 70 K. Improvements of up to one order of magnitude appear feasible for temperatures achievable by passive cooling. The flat detector response over a wavelength range reaching from the visible to beyond 50 microns, which is an intrinsic advantage of bolometric devices, makes for easy calibration. The fact that these materials have been developed for reduced temperature applications makes ferro- and pyroelectric materials most attractive candidates for serious exploration.

Haller, Eugene E.↗
NASA NTRS1994

Technical assessment of Mir-1 life support hardware for the international space station

NASA has been progressively learning the design and performance of the Russian life support systems utilized in their Mir space station. In 1992, a plan was implemented to assess the benefits of the Mir-1 life support systems to the Freedom program. Three primary tasks focused on: evaluating the operational Mir-1 support technologies and understanding if specific Russian systems could be directly utilized on the American space station and if Russian technology design information could prove useful in improving the current design of the planned American life support equipment; evaluating the ongoing Russian life support technology development activities to determine areas of potential long-term application to the U.S. space station; and utilizing the expertise of their space station life support systems to evaluate the benefits to the current U.S. space station program which included the integration of the Russian Mir-1 designs with the U.S. designs to support a crew of six.

Mitchell, K. L.↗
NASA NTRS2002

Controller Design for the ST7 Disturbance Reduction System

The Space Technology 7 experiment will perform an on-orbit system-level validation of two specific Disturbance Reduction System technologies: a gravitational reference sensor employing a free-floating test mass and a set of micro-Newton colloidal thrusters. The Disturbance Reduction System is designed to maintain a spacecraft's position with respect to the free-floating test mass to less than 10 nm/ square root of Hz, over the frequency range 10(exp -3) Hz to 10(exp -2) Hz. This paper presents the design and analysis of the coupled drag-free and attitude control system that closes the loop between the gravitational reference sensor and the micro-Newton thrusters while incorporating star tracker data at low frequencies. The effects of actuation and measurement noise and disturbances on the spacecraft and test masses are evaluated in a seven-degree-of-freedom planar model incorporating two translational and one rotational degrees of freedom for the spacecraft and two translational degrees of freedom for each test mass.

Maghami, Peiman↗
NASA NTRS2003

Design and Analysis of the ST7 Disturbance Reduction System (DRS) Spacecraft Controller

The Space Technology 7 experiment will perform an on-orbit system-level validation of two specific Disturbance Reduction System technologies: a gravitational reference sensor employing a free-floating test mass and a set of micronewton colloidal thrusters. The Disturbance Reduction System is designed to maintain a spacecraft's position with respect to the free-floating test mass to less than 10 nm/square root of Hz, over the frequency range 10(exp -3) Hz to 10(exp -2) Hz. This paper presents the design and analysis of the coupled drag-free and attitude control system that closes the loop between the gravitational reference sensor and the micronewton thrusters while incorporating star tracker data at low frequencies. The effects of actuation and measurement noise and disturbances on the spacecraft and test masses are evaluated in a seven-degree-of-freedom planar model incorporating two translational and one rotational degrees of freedom for the spacecraft and two translational degrees of freedom for each test mass.

Maghami, P. G.↗
NASA NTRS2003

Disturbance Reduction Control Design for the ST7 Flight Validation Experiment

The Space Technology 7 experiment will perform an on-orbit system-level validation of two specific Disturbance Reduction System technologies: a gravitational reference sensor employing a free-floating test mass, and a set of micro-Newton colloidal thrusters. The ST7 Disturbance Reduction System is designed to maintain the spacecraft's position with respect to a free-floating test mass to less than 10 nm/Hz, over the frequency range of 1 to 30 mHz. This paper presents the design and analysis of the coupled, drag-free and attitude control systems that close the loop between the gravitational reference sensor and the micro-Newton thrusters, while incorporating star tracker data at low frequencies. A full 18 degree-of-freedom model, which incorporates rigid-body models of the spacecraft and two test masses, is used to evaluate the effects of actuation and measurement noise and disturbances on the performance of the drag-free system.

Maghami, P. G.↗
NASA NTRS2004

Initiating the 2002 Mars Science Laboratory (MSL) Technology Program

The Mars Science Laboratory (MSL) Project is an aggressive mission launching in 2009 to investigate the Martian environment and requires new capabilities that are currently are not available. The MSL Technology Program is developing a wide-range of technologies needed for this Mission and potentially other space missions. The MSL Technology Program reports to both the MSL Project and the Mars Technology Program (MTP). The dual reporting process creates a challenging management situation, but ensures the new technology meets both the specific MSL requirements and the broader Mars Program requirements. MTP is a NASA-wide technology development program managed by JPL and is divided into a Focused Program and a Base Program. The MSL Technology Program is under the focused program and is tightly coupled to MSL's mission milestones and deliverables. The technology budget is separate from the flight Project budget, but the technology's requirements and the development process are tightly coordinated with the Project. The MSL Technology Program combines the proven management techniques of flight projects with the commercial technology management strategies of industry and academia, to create a technology management program that meets the short-term requirements of MSL and the long-term requirements of MTP. This paper examines the initiation of 2002 MSL Technology program. Some of the areas discussed in this paper include technology definition, task selection, technology management, and technology assessment. This paper also provides an update of the 2003 MSL technology program and examines some of the drivers that changed the program from its initiation.

Caffrey, Robert T.↗
NASA NTRS2003

Control Modes of the ST7 Disturbance Reduction System Flight Validation Experiment

The Space Technology 7 experiment will perform an on-orbit system-level validation of two specific Disturbance Reduction System technologies: a gravitational reference sensor employing a free-floating test mass and a set of micro-Newton colloidal thrusters. The ST7 Disturbance Reduction System is designed to maintain the spacecraft s position with respect to a free-floating test mass to less than 10 nm/the square root of Hz over the frequency range of 1 to 30 mHz. This requirement will help ensure that the residual accelerations on the test masses (beyond gravitational acceleration) will be below the ST7 goal of 300 (1 + [f/3 mHz](sup 2)) pm/s(sup 2)/the square root of Hz. This paper presents the overall design and analysis of the spacecraft drag-free and attitude controllers being designed by NASA s Goddard Space Flight Center. These controllers close the loop between the GRS and the micro-Newton colloidal thrusters. The ST7 DRS comprises three control systems: the attitude control system to maintain a sun-pointing attitude, the drag free control to center the spacecraft about the test masses, and the test mass suspension control. There are five control modes in the operation of the ST7-DRS, starting from the attitude-only mode and leading to the challenging science mode. The design and analysis of each of the control modes are presented. An 18-DOF model is developed to capture the essential dynamics of the ST7-DRS package. It includes all rigid-body dynamics of the spacecraft and two test masses (three translations and three rotations for the spacecraft and each of the test masses). Actuation and measurement noise and major disturbance sources acting on the spacecraft and test masses are modeled.

Maghami, P. G.↗
NASA NTRS1993

Future technology aim of the National Aerospace Plane Program

Technical areas where hypersonic technology programs outside NASP might offer assistance and participate in the NASP program are considered. These specific areas include airframe, technology opportunities for providing better performance and reduced weight, the NDV application of NASP technology, and engine propellant systems and subsystems.

Anderson, Charles W.↗
NASA NTRS1997

Summary of Research Report Cooperative Agreement

Several areas of work related to commercialization of technology developed at NASA Ames Research Center (ARC) are discussed in this report. The areas are: (1) perform a feasibility study to develop a software commercialization center is at ARC; (2) perform preliminary work for formation of joint development of sensor technology for telemedicine applications; (3) development of a discovery interview process and staff training to assist the commercialization of technology developed at Ames, specifically aimed at working with researchers; (4) develop partners to further develop and commercialize image compression technology developed at AMES; (5) assist efforts to commercialize a software technology which imparts the ability to establish relevance-based retrieval in the handling of large repositories of information; (6) explore the development of cryocooler technology using pulse tube refrigeration; (7) assess interest in commercialization of a new method of measuring skin friction drag on wind tunnel models using liquid crystal material; (8) attempt to incorporate emerging technologies in the infrastructure of natural hazards mitigation; and (9) forming a nonprofit organization, "The Bootstrap Alliance", whose mission is to promote the use of digital technologies for collaborative problem solving. The results of these initiatives are discussed.

Source record↗
NASA NTRS2007

Control of the ST7 Disturbance Reduction System Flight Experiment

The Space Technology 7 (ST7) experiment will perform an on-orbit system-level validation of two specific Disturbance Reduction System technologies: colloidal micronewton thrusters and drag-free control. The ST7 Disturbance Reduction System (DRS) is designed to maintain the spacecraft s position with respect to a free-floating test mass while limiting the residual accelerations of that test mass over the frequency range of 1 to 30 mHz. This paper presents the overall design and analysis of the spacecraft drag-free and attitude controllers, with particular attention given to its primary mission mode. These controllers close the loop between the drag-free sensors and the colloidal micronewton thrusters.

Maghami, P. G.↗
NASA NTRS2011

An Earthling to an Astronaut: Medical Challenges

Humans can travel safely into space in low Earth orbit (LEO) or to near-Earth objects if several medical, physiological, environmental, and human factors issues risks are mitigated. Research must be performed in order to set standards in these four areas, and current NASA standards are contained in the Space Flight Human System Standards volumes 1 and 2, and crew medical certification standards. These three sets of standards drive all of the clinical, biomedical research and environmental technology development for the NASA human space flight program. These standards also drive the identification of specific risks to crew health and safety, and we currently manage 65 human system risks within the human space flight program. Each risk has a specific program of research, technology development, and development of operational procedures to mitigate the risks. Some of the more important risks tat will be discussed in this talk include exposure to radiation, behavioral health due to confinement in a closed cabin, physiological changes such as loss of bone, muscle and exercise capability, reduction in immune system capability, environmental threats of maintaining an adequate atmosphere and water for drinking, avoidance of toxic or infectious material, protection of hearing, and human factors issues of equipment and task design. A nutritious and varied food supply must also be provided. All of these risks will be discussed and current strategies for mitigating these risks for long-duration human space flight. In mitigating these 65 human system risks, novel approaches to problem solving must be employed to find the most appropriate research and technology based applications. Some risk mitigations are developed internally to NASA while others are found through research grants, technology procurements, and more recently open innovation techniques to seek solutions from the global technical community. Examples and results will be presented from all of these approaches including the more recent use of prizes to stimulate innovation.

Davis, Jeffrey R.↗
NASA NTRSDate not supplied

Phasing in COTS EEE parts in NASA

A number of activities within NASA and the space community, as well as growing technology needs and supply chain changes have accelerated the need to expand the use of COTS parts within NASA. While the use of COTS has been formally institutionalized and deemed acceptable for Class D space missions and those with greater tolerance for risk, there is still a lack of understanding of how to most effectively use COTS in such high risk-tolerance missions, and no apparent path towards broad use in missions with much less tolerance for risk. However, the reality is that the fundamental limitations of technology associated with the military specification system combined with the need to fly newer technologies in upcoming flagship robotic missions and human space flight missions will ultimately demand a more expansive use of COTS. The infinite nature of COTS gives rise to numerous challenges in the selection, acceptance, testing, and usage of COTS when reliable operation is essential. This presentation will highlight some of the current artifacts of a NASA Engineering and Safety Center (NESC) study on the use of COTS parts, as well as many of the historical through current facts about parts assurance within Agency to provide a path forward for reliable use of COTS for a range of space applications and risk postures.

EEE parts↗
NASA NTRSDate not supplied

Phasing COTS Part Into Low-Risk-Tolerant Missions

A number of activities within NASA and the space community, as well as growing technology needs and supply chain changes have accelerated the need to expand the use of COTS parts within NASA. While the use of COTS has been formally institutionalized and deemed acceptable for Class D space missions and those with greater tolerance for risk, there is still a lack of understanding of how to most effectively use COTS in such high risk-tolerance missions, and no apparent path towards broad use in missions with much less tolerance for risk. However, the reality is that the fundamental limitations of technology associated with the military specification system combined with the need to fly newer technologies in upcoming flagship robotic missions and human space flight missions will ultimately demand a more expansive use of COTS. The infinite nature of COTS gives rise to numerous challenges in the selection, acceptance, testing, and usage of COTS when reliable operation is essential. This presentation will highlight some of the results of a NASA Engineering and Safety Center (NESC) study on the use of COTS parts, as well as many of the historical through current facts about parts assurance within Agency to provide a path forward for reliable use of COTS for a range of space applications and risk postures. In addition this presentation will dispel the myth that expanded use of COTS parts causes a new set of radiation threats to missions.

COTS↗
NASA NTRSDate not supplied

Near-Earth Object Workshops to Assess Reconnaissance for Planetary Defense (NEO WARP)

Based on the third goal of the United States National Preparedness Strategy and Action Plan for Near-Earth Object Hazards and Planetary Defense to “develop technologies for NEO reconnaissance, deflection, and disruption missions” and specifically includes actions aimed at technology development for rapid-response NEO reconnaissance missions.

Planetary Defense↗
NASA NTRSDate not supplied

Phasing COTS Part Into Low-Risk-Tolerant Missions

A number of activities within NASA and the space community, as well as growing technology needs and supply chain changes have accelerated the need to expand the use of COTS parts within NASA. While the use of COTS has been formally institutionalized and deemed acceptable for Class D space missions and those with greater tolerance for risk, there is still a lack of understanding of how to most effectively use COTS in such high risk-tolerance missions, and no apparent path towards broad use in missions with much less tolerance for risk. However, the reality is that the fundamental limitations of technology associated with the military specification system combined with the need to fly newer technologies in upcoming flagship robotic missions and human space flight missions will ultimately demand a more expansive use of COTS. The infinite nature of COTS gives rise to numerous challenges in the selection, acceptance, testing, and usage of COTS when reliable operation is essential. This presentation will highlight some of the results of a NASA Engineering and Safety Center (NESC) study on the use of COTS parts, as well as many of the historical through current facts about parts assurance within Agency to provide a path forward for reliable use of COTS for a range of space applications and risk postures. In addition this presentation will dispel the myth that expanded use of COTS parts causes a new set of radiation threats to missions.

COTS↗
NASA NTRS1992

System safety activities supporting an aero-space plane ground support technology

An overview is presented of the specific system safety activities required to support the ground support technology program associated with the design of an aerospace plane. Safe zones must be assessed to ensure that explosive safety requirements are attained to protect the vehicle, personnel, and support and operational facilities. Attention is given to the specific and unique design requirements connected with the utilization of cryogenic fuels as they apply to the design and development of an aerospace plane.

Mattern, Steven F.↗
NASA NTRS2002

Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

Thomas, Dale↗