Search NASA⌕ Search

SEARCH · Search NASA

Results for “test effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

FY21 Status Report on Creep Rupture Testing at ANL to Support the Development of Alloy 709 Code Case

This report provides an update on the status of the creep rupture testing on the first commercial heat of Alloy 709 in support of the Alloy 709 Code Case development. Creep tests were performed in air on the lever-arm load frames in the Mechanical and Environmental Testing Laboratory at Argonne National Laboratory (ANL). In FY21, the focus was on the age-hardened ESR-1150°C material. Twenty two tests were initiated, among which ten were completed. This report presents the data from the completed tests. Metallographic characterization of the fractured specimens were performed and the results are included. The creep data enabled the preliminary analysis of the creep behavior of this material. The characterization showed the effect of test temperature and stress on the deformation microstructure.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Integrating a Water Tracer Model Into WRF‐Hydro for Characterizing the Effect of Lateral Flow in Hydrologic Simulations

Abstract Most current land models approximate terrestrial hydrological processes as one‐dimensional vertical flow, neglecting lateral water movement from ridges to valleys. Such lateral flow is fundamental at catchment scales and becomes crucial for finer‐scale land models. To test the effect of incorporating lateral flow toward three‐dimensional representations of hydrological processes in the next generation land models, we integrate a water tracer model into the WRF‐Hydro framework to track water movement from precipitation to discharge and evapotranspiration. This hydrologic‐tracer integrated system allows us to identify the key mechanisms by which lateral flow affects the flow paths and transit times in WRF‐Hydro. By comparing modeling experiments with and without lateral routing in two contrasting catchments, we determine the impacts of lateral flow on the transit times of precipitation event‐water. Results show that with limited hydrologic connectivity, lateral flow extends the transit times by reducing (increasing) event‐water drainage loss (accumulation) in ridges (valleys) and allowing reinfiltration of infiltration‐excess flow, which is missing in most land models. On the contrary with high hydrologic connectivity, lateral flow can effectively accelerate the water release to streams and reduce the transit time. However, the transit times are substantially underestimated by the model compared with isotope‐derived estimates, indicating model limitations in representing flow paths and transit times. This study provides some insights on the fundamental differences in terrestrial hydrology simulated by land models with and without lateral flow representation.

54 ENVIRONMENTAL SCIENCES↗

Biotic Interactions Are More Important than Propagule Pressure in Microbial Community Invasions

ABSTRACT Microbial probiotics are intended to improve functions in diverse ecosystems, yet probiotics often fail to establish in a preexisting microbiome. This is a species invasion problem. The relative importance of the two major factors controlling establishment in this context—propagule pressure (inoculation dose and frequency) and biotic interactions (composition of introduced and resident communities)—is unknown. We tested the effect of these factors in driving microbial composition and functioning following 12 microbial community invasions (e.g., introductions of many microbial invaders) in microcosms. Ecosystem functioning over a 30-day postinvasion period was assessed by measuring activity (respiration) and environment modification (dissolved organic carbon abundance). To test the dependence on environmental context, experiments were performed in two resource environments. In both environments, biotic interactions were more important than propagule pressure in driving microbial composition and community function, but the magnitude of effect varied by environment. Successful invaders comprised approximately 8% of the total number of operational taxonomic units (OTUs). Bacteria were better invaders than fungi, with average relative abundances of 7.4% ± 6.8% and 1.5% ± 1.4% of OTUs, respectively. Common bacterial invaders were associated with stress response traits. The most resilient bacterial and fungal families, in other words, those least impacted by invasions, were linked to antimicrobial resistance or production traits. Illuminating the principles that determine community composition and functioning following microbial invasions is key to efficient community engineering. IMPORTANCE With increasing frequency, humans are introducing new microbes into preexisting microbiomes to alter functioning. Example applications include modification of microflora in human guts for better health and those of soil for food security and/or climate management. Probiotic applications are often approached as trial-and-error endeavors and have mixed outcomes. We propose that increased success in microbiome engineering may be achieved with a better understanding of microbial invasions. We conducted a microbial community invasion experiment to test the relative importance of propagule pressure and biotic interactions in driving microbial community composition and ecosystem functioning in microcosms. We found that biotic interactions were more important than propagule pressure in determining the impact of microbial invasions. Furthermore, the principles for community engineering vary among organismal groups (bacteria versus fungi).

59 BASIC BIOLOGICAL SCIENCES↗

HYDROGEN EFFECTS ON FRACTURE TOUGHNESS OF TYPE 316L STAINLESS STEEL FROM 175 K TO 425 K

The effects of hydrogen on the fracture-toughness properties of Type 316L stainless steel from 175 K to 425 K were measured. Fracture-toughness samples were fabricated from Type 316L stainless steel forgings and hydrogen-charged with hydrogen at 34 MPa and 623 K for two weeks prior to testing. The effect of hydrogen on the J-Integral vs. crack extension behavior was measured at various temperatures by fracturing non-charged and hydrogen-charged samples in an environmental chamber. Hydrogen-charged steels had lower toughness values than non-charged ones, but still retained good toughness properties. The fracture-toughness values of hydrogen-charged samples tested near ambient temperature were about 70% of non-charged values. For hydrogen-charged samples tested at 225 K and 425 K, the fracture-toughness values were 50% of the non-charged values. In all cases, fracture occurred by microvoid nucleation and coalescence, although the hydrogen-charged samples had smaller and more closely spaced microvoids. The results suggest that hydrogen effects on toughness are greater at 225 K than they are at ambient temperature because of strain-induced martensite formation. At 425 K, the hydrogen effects on toughness are greater than they are at ambient temperature because of the higher mobility of hydrogen.

08 HYDROGEN↗

SIMULATING THE EFFECTS OF INITIAL PITCH-ANGLE DISTRIBUTIONS ON SOLAR FLARES

In this work, we model both the thermal and non-thermal components of solar flares. The model we use, HYLOOP, combines a hydrodynamic equation solver with a non-thermal particle tracking code to simulate the thermal and non-thermal dynamics and emission of solar flares. In order to test the effects of pitch-angle distribution on flare dynamics and emission, a series of flares is simulated with non-thermal electron beams injected at the loop apex. The pitch-angle distribution of each beam is described by a single parameter and allowed to vary from flare to flare. We use the results of these simulations to generate synthetic hard and soft X-ray emissions (HXR and SXR). The light curves of the flares in Hinode's X-ray Telescope passbands show a distinct signal that is highly dependent on pitch-angle distribution. The simulated HXR emission in the 3-6 keV bandpass shows the formation and evolution of emission sources that correspond well to the observations of pre-impulsive flares. This ability to test theoretical models of thermal and non-thermal flare dynamics directly with observations allows for the investigation of a wide range of physical processes governing the evolution of solar flares. We find that the initial pitch-angle distribution of non-thermal particle populations has a profound effect on loop top HXR and SXR emission and that apparent motion of HXR is a natural consequence of non-thermal particle evolution in a magnetic trap.

79 ASTRONOMY AND ASTROPHYSICS↗

Assessing and Testing Hydrokinetic Turbine Performance and Effects on Open Channel Hydrodynamics: An Irrigation Canal Case Study.

Hydrokinetic energy from flowing water in open channels has the potential to support local electricity needs with lower regulatory or capital investment than impounding water with more conventional means. MOU agencies involved in federal hydropower development have identified the need to better understand the opportunities for hydrokinetic (HK) energy development within existing canal systems that may already have integrated hydropower plants. This document provides an overview of the main considerations, tools, and assessment methods, for implementing field tests in an open-channel water system to characterize current energy converter (CEC) device performance and hydrodynamic effects. It describes open channel processes relevant to their HK site and perform pertinent analyses to guide siting and CEC layout design, with the goal of streamlining the evaluation process and reducing the risk of interfering with existing uses of the site. This document outlines key site parameters of interest and effective tools and methods for measurement and analysis with examples drawn from the Roza Main Canal, in Yakima, WA to illustrate a site application.

13 HYDRO ENERGY↗

Cryogenic rf test of the first SRF cavity etched in an rf Ar/Cl 2 plasma

An apparatus and a method for etching of the inner surfaces of superconducting radio frequency (SRF) accelerator cavities are described. The apparatus is based on the reactive ion etching performed in an Ar/Cl 2 cylindrical capacitive discharge with reversed asymmetry. To test the effect of the plasma etching on the cavity rf performance, a 1497 MHz single cell SRF cavity was used. The single cell cavity was mechanically polished and buffer chemically etched and then rf tested at cryogenic temperatures to provide a baseline characterization. The cavity’s inner wall was then exposed to the capacitive discharge in a mixture of Argon and Chlorine. The inner wall acted as the grounded electrode, while kept at elevated temperature. The processing was accomplished by axially moving the dc-biased, corrugated inner electrode and the gas flow inlet in a step-wise manner to establish a sequence of longitudinally segmented discharges. The cavity was then tested in a standard vertical test stand at cryogenic temperatures. The rf tests and surface condition results, including the electron field emission elimination, are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cooperative Research and Development Agreement between National Energy Technology Laboratory and OxEon Energy LLC (Abstract)

The National Energy Technology Laboratory (NETL) will collaborate with OxEon Energy LLC (OxEon) to apply NETL’s patented single step electrode infiltration technique on OxEon solid oxide fuel cells (SOFC) for Electric Vertical Takeoff and Landing (eVTOL) aircraft applications below one megawatt. The expanded application of the OxEon solid oxide cell technology on eVTOL aircraft seeks to demonstrate a high performance, durable SOFC system that will produce more electricity per weight based on possible operation on ammonia as fuel. NETL’s single-step electrode infiltration technique addresses these challenges by introducing a highly active nanocatalyst material into the SOFC electrode microstructure to improving cell performance, longevity, and fuel flexibility. Specifically for this project, OxEon will incorporate NETL’s technology to generate a small stack of cells (1 kW output) to demonstrate a fuel flexible system at a relevant scale. NETL will apply its infiltration technology to cells supplied by OxEon, test the effectiveness of the infiltration internally at NETL based on performance in hydrogen, and then supply infiltrated cells to OxEon and Pacific Northwest National Laboratory for independent confirmation and for the 1 kW stack test.

30 DIRECT ENERGY CONVERSION↗

A regional assessment of white-tailed deer effects on plant invasion

Herbivores can profoundly influence plant species assembly, including plant invasion, and resulting community composition. Population increases of native herbivores, e.g., white-tailed deer ( Odocoileus virginianus ), combined with burgeoning plant invasions raise concerns for native plant diversity and forest regeneration. While individual researchers typically test for the impact of deer on plant invasion at a few sites, the overarching influence of deer on plant invasion across regional scales is unclear. We tested the effects of deer on the abundance and diversity of introduced and native herbaceous and woody plants across 23 white-tailed deer research sites distributed across the east central and northeastern United States and representing a wide range of deer densities and invasive plant abundance and identity. Deer access/exclusion or deer population density did not affect introduced plant richness or community-level abundance. Native and total plant species richness, abundance (cover and stem density), and Shannon diversity were lower in deer-access vs. deer-exclusion plots. Among deer access plots, native species richness, native and total cover, and Shannon diversity (cover) declined as deer density increased. Deer access increased the proportion of introduced species cover (but not of species richness or stem density). As deer density increased, the proportion of introduced species richness, cover, and stem density all increased. Because absolute abundance of introduced plants was unaffected by deer, the increase in proportion of introduced plant abundance is likely an indirect effect of deer reducing native cover. Indicator species analysis revealed that deer access favored three introduced plant species, including Alliaria petiolata and Microstegium vimineum , as well as four native plant species. In contrast, deer exclusion favored three introduced plant species, including Lonicera japonica and Rosa multiflora , and fifteen native plant species. Altogether, native deer reduced community diversity, lowering native plant richness and abundance, and benefited certain invasive plants, suggesting pervasive impacts of this keystone herbivore on plant community composition and ecosystem services in native forests across broad swathes of the eastern US.

59 BASIC BIOLOGICAL SCIENCES↗

SU-E-T-71: A Radiochromic Film Based Quantitative Assessment of Thermoplastic Mask Bolus Effect in Head and Neck IMRT/VMAT

Purpose: To quantify the factors leading to thermoplastic mask bolus-associated-increased skin dose in head and neck IMRT/VMAT using EBT2 film. Methods: EBT2 film placed beneath a dual layer 3-point ORFIT head, neck and shoulder mask was used to test the effect of mask thickness, beam modulation, air gap, and beam obliquity on bolus effect. Mask thickness was varied based on the distribution of 1.6mm Orfilight layer on top of 2 mm Efficast layer. Beam modulation was varied by irradiating the film with an open field (no beam modulation) and a step and shoot field (beam modulation). Air gap between mask and film was varied from 0 to 5mm. Beam obliquity was varied by irradiating the film at gantry angles of 0°, 35°, and 70°.Finally, film strips placed on a Rando phantom under an Orfit mask, in regions of expected high dose, were irradiated using 5 IMRT and 5 VMAT plans with various modulation levels (modulation factor 2 to 5) and the results were compared with those obtained placing OSLDs at the same locations. Results: An 18–34% increase in mask bolus effect was observed for three factors where the effect of beam obliquity ≥ beam modulation > mask thickness. No increase in mask bolus effect was observed for change in air gap. A 6–13% increase in dose due to mask bolus effect was observed on film strips. Conclusion: This work underlines the role of beam obliquity and beam modulation combined with thermoplastic mask thickness in increasing mask bolus-associated skin dose in head and neck IMRT/VMAT. One possible method of dose reduction, based on knowledge gained from this work, is inclusion of skin as an avoidance structure in treatment planning. Another approach is to design a mask with the least amount of thermoplastic material necessary for immobilization.

60 APPLIED LIFE SCIENCES↗

Continuing the Validation of CCIM Processability for Glass Ceramic HLLW Forms: Plan for Test AFY14CCIM-GC1

This test plan covers test AFY14CCIM-GC1which is the first of two scheduled FY-2014 test runs involving glass ceramic waste forms in the Idaho National Laboratory’s Cold Crucible Induction Melter Pilot Plant. The test plan is based on the successes and challenges of previous tests performed in FY-2012 and FY-2013. The purpose of this test is to continue to collect data for validating the glass ceramic High Level Liquid Waste form processability advantages using Cold Crucible Induction Melter technology. The major objective of AFYCCIM-GC1 is to complete additional proposed crucible pouring and post tapping controlled cooling experiments not completed during previous tests due to crucible drain failure. This is necessary to qualify that no heat treatments in standard waste disposal canisters are necessary for the operational scale production of glass ceramic waste forms. Other objectives include the production and post-test analysis of surrogate waste forms made from separate pours into the same graphite mold canister, testing the robustness of an upgraded crucible bottom drain and drain heater assembly, testing the effectiveness of inductive melt initiation using a resistive starter ring with a square wave configuration, and observing the tapped molten flow behavior in pans with areas identical to standard High Level Waste disposal canisters. Testing conditions, the surrogate waste composition, key testing steps, testing parameters, and sampling and analysis requirements are defined.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nondestructive Evaluation of Carbon Fiber Reinforced Polymers

The American Society of Mechanical Engineers Boiler and Pressure Vessel Code requires repair and replacement of safety-related piping materials to meet the original Construction Code; however, no construction criteria currently exist for carbon fiber reinforced polymer (CFRP) materials in the nuclear industry. Although nondestructive examination (NDE) techniques for cast and wrought ferritic and austenitic steels are well established, licensees are increasingly deploying novel materials such as CFRP for which assessment of the use of NDE is required, as the inspectability of such materials and the influence of manufacturing processes on inspectability remain insufficiently understood. To address these gaps, Pacific Northwest National Laboratory (PNNL) evaluated the fabrication of several CFRP repair mockups and the effectiveness of NDE methods to support regulatory review of CFRP repairs in nuclear power plant applications. Representative flat-plate mockups containing realistic fabrication defects were manufactured and inspected using manual and automated tap testing, dynamic response spectroscopy (DRS), and ultrasonic testing (UT). The study identified significant fabrication variability, particularly in controlling defect size and epoxy thickness, which strongly influenced defect detectability by NDE methods. Tap testing was effective for shallow defects in thin epoxy configurations but unreliable for thicker repairs and deeper flaws. DRS demonstrated higher sensitivity to dry spots but produced unconfirmed indications for thicker plates, requiring further validation. Conventional UT, particularly at 1.0 MHz, showed the strongest overall capability for detecting a range of defects, although performance degraded with increasing repair thickness and complexity. The results highlight the need to better define critical defect sizes, develop reliable mockup fabrication methods, and validate NDE methods needed to support CFRP repairs.

36 MATERIALS SCIENCE↗

γ-Fe{sub 2}O{sub 3} nanoparticles: An easily recoverable effective photo-catalyst for the degradation of rose bengal and methylene blue dyes in the waste-water treatment plant

Graphical abstract: - Highlights: • γ-Fe{sub 2}O{sub 3} NPs from a single-source precursor and characterized by XRD, TEM, UV–vis spectra. • The NPs were tested as effective photocatalyst toward degradation of RB and MB dyes. • The possible pathway of the photocatalytic decomposition process has been discussed. • The active species, OH·, was detected by TA photoluminescence probing techniques. - Abstract: γ-Fe{sub 2}O{sub 3} nanoparticles (NPs) were synthesized from a single-source precursor complex [Fe{sub 3}O(C{sub 6}H{sub 5}COO){sub 6}(H{sub 2}O){sub 3}]NO{sub 3} by a simple thermal decomposition process and have been characterized by X-ray diffraction analysis (XRD), transmission electron microscopy (TEM) and UV–vis spectroscopic techniques. The NPs were highly pure and well crystallized having hexagonal morphology with an average particle size of 35 nm. The prepared γ-Fe{sub 2}O{sub 3} (maghemite) NPs show effective photo-catalytic activity toward the degradation of rose bengal (RB) and methylene blue (MB) dyes under visible light irradiation and can easily be recoverable in the presence of magnetic field for successive re-uses. The possible photo-catalytic decomposition mechanism is discussed through the detection of hydroxyl radical (OH·) by terephthalic acid photo-luminescence probing technique.

36 MATERIALS SCIENCE↗

Effects of roasting additives and leaching parameters on the extraction of rare earth elements from coal fly ash

Coal fly ash is a promising alternative source for rare earth elements (REE), which are critical materials in many technologies. REEs are entrained in the aluminosilicate glass of the fly ash particles, hindering their ability to solubilize during acid leaching. The purpose of this research was to test the effectiveness of roasting techniques to improve extraction of REEs from fly ash, determine key parameters controlling REE extraction, and understand trade-offs in reagent use. Representative coal ash samples from major U.S. coal basins (Appalachian, Illinois, and Powder River basins) were roasted using a variety of chemical additives (Na 2 O 2 , NaOH, CaO, Na 2 CO 3 , CaSO 4 , (NH 4 ) 2 SO 4 ). Further experiments investigated the effects of additive:ash ratio, roasting temperature, and leachate pH on REE extraction. We found here that NaOH roasting often recovered >90% of total REE content, equivalent to the USGS-recommended method (Na 2 O 2 sintering). Other additives tested recovered <50% of total REE content; the 450 °C sinter temperature, which was well below the melting points of these agents, may have been a contributing factor. Decreasing the NaOH-ash ratio did not significantly inhibit in REE recoveries, while increasing the leachate pH led to a sharp decline. There was a strong positive correlation between REE extraction and leachate H + molarity. Recoveries of ~100% were observed for the Powder River Basin ash sample regardless of the roasting agent and additive:ash ratio used. This suggests that acid leaching alone is sufficient for recovering REEs from more soluble Powder River Basin ashes. For Appalachian and Illinois Basin ashes, the recommended roasting conditions for >70% REE extraction are a 1:1 NaOH-ash ratio and leaching with 1–2 mol/L HNO 3 .

01 COAL, LIGNITE, AND PEAT↗

Long-term 3D MHD simulations of black hole accretion discs formed in neutron star mergers

ABSTRACT We examine the long-term evolution of accretion tori around black hole (BH) remnants of compact object mergers involving at least one neutron star, to better understand their contribution to kilonovae and the synthesis of r-process elements. To this end, we modify the unsplit magnetohydrodynamic (MHD) solver in flash 4.5 to work in non-uniform three-dimensional spherical coordinates, enabling more efficient coverage of a large dynamic range in length scales while exploiting symmetries in the system. This modified code is used to perform BH accretion disc simulations that vary the initial magnetic field geometry and disc compactness, utilizing a physical equation of state, a neutrino leakage scheme for emission and absorption, and modelling the BH’s gravity with a pseudo-Newtonian potential. Simulations run for long enough to achieve a radiatively inefficient state in the disc. We find robust mass ejection with both poloidal and toroidal initial field geometries, and suppressed outflow at high disc compactness. With the included physics, we obtain bimodal velocity distributions that trace back to mass ejection by magnetic stresses at early times, and to thermal processes in the radiatively inefficient state at late times. The electron fraction distribution of the disc outflow is broad in all models, and the ejecta geometry follows a characteristic hourglass shape. We test the effect of removing neutrino absorption or nuclear recombination with axisymmetric models, finding ${\sim} 50{{\ \rm per\ cent}}$ less mass ejection and more neutron-rich composition without neutrino absorption, and a subdominant contribution from nuclear recombination. Tests of the MHD and neutrino leakage implementations are included.

Fahlman, Steven (ORCID:0000000348759940)↗

Effect of Silicon Content on the Hardenability and Mechanical Properties of Link-Chain Steel

Heavy-section link-chains are increasingly required to satisfy industrial demands of shipping, lifting, and mining machinery. In this study, the hardenability of link-chain steels with different Si contents was investigated using end-quench tests. The microstructures of the end-quenched specimens were examined by x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The mechanical properties were investigated by tension tests and impact tests. The effect of the Si content on the phase-transformation temperature during cooling was analyzed by differential scanning calorimetry. It was found that increasing the Si content from 0.24 to 0.74% led to a significant increase in hardenability; the ideal diameter (i.e., the diameter of given steel that would produce 50% martensite at the center when quenched in a hypothetical quenching medium that reduces the surface temperature of the heated steel to the bath temperature in zero time) increased from 187 to 248 mm. Si enhances the hardenability of link-chain steel by affecting its phase-transition behaviors during cooling, including suppressing ferrite formation, inhibiting carbide precipitation, and lowering the temperature of maximum transformation of bainite. The suggested Si content is 0.70-0.75% to produce link-chain steel with high hardenability and good mechanical properties.

36 MATERIALS SCIENCE↗

Behavior of fuel with zirconium alloy cladding in reactivity-initiated accident and loss-of-coolant accident - 2016-0090

Along with our colleagues at the Japan Atomic Energy Research Institute (JAERI) and Japan Atomic Energy Agency (JAEA), we have performed extensive research programs for more than 2 decades and have developed a better understanding of fuel behavior under accident conditions. Data and findings from these research programs have provided the technical basis directly and indirectly for regulatory criteria in Japan and other countries. This paper reviews and summarizes the major outcomes from the research programs performed at JAERI and JAEA facilities and identifies further research needs. The programs aim to generate data and models to (1) evaluate the adequacy of present safety criteria and safety margins; (2) create a database for the future regulation of higher-burnup UO{sub 2} and mixed-oxide (MOX) fuels, new cladding, and pellets; (3) provide adequately mechanistic computer codes for regulatory application; (4) promote a better understanding of phenomena that appear in high-burnup regions and MOX fuels, such as rim effect and an effect of plutonium agglomerates in MOX fuels, and to evaluate those effects on fuel behavior in accident conditions; and (5) to assess fuel behaviors with higher fuel duty, such as plant power uprates, longer operating cycles, and water chemistry changes. The programs comprise reactivity-initiated accident studies, including pulse-irradiation experiments in the Nuclear Safety Research Reactor, cladding mechanical tests, and the development and verification of RANNS; loss-of-coolant accident tests, including integral thermal shock tests, oxidation rate measurements, and cladding mechanical tests; development and verification of a computer code FEMAXI-6 that simulates high-burnup fuel behavior under normal operating and abnormal transient conditions; and studies on phenomena specific to high-burnup regions, including thermal property measurements, experimental and analytical simulation of rim structure formation, cladding mechanical tests on effects of hydrides, etc. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The validation of an invitro colonic motility assay as a biomarker for gastrointestinal adverse drug reactions

Motility-related gastrointestinal adverse drug reactions (GADRs), such as constipation and diarrhea, are some of the most frequently reported adverse events associated with the clinical development of new chemical entities, and for marketed drugs. However, biomarkers capable of detecting such GADRs are lacking. Here, we describe an in vitro assay developed to detect and quantify changes in intestinal motility as a surrogate biomarker for constipation/diarrhea-type GADRs. In vitro recordings of intraluminal pressure were used to monitor the presence of colonic peristaltic motor complexes (CPMCs) in mouse colonic segments. CPMC frequency, contractile and total mechanical activity were assessed. To validate the assay, two experimental protocols were conducted. Initially, five drugs with known gastrointestinal effects were tested to determine optimal parameters describing excitation and inhibition as markers for disturbances in colonic motility. This was followed by a 'blinded' evaluation of nine drugs associated with or without clinically identified constipation/diarrhea-type GADRs. Concentration-response relationships were determined for these drugs and the effects were compared with their maximal free therapeutic plasma concentration in humans. The assay detected stimulatory and inhibitory responses, likely correlating to the occurrence of diarrhea or constipation. Concentration-related effects were identified and potential mechanisms of action were inferred for several drugs. Based on the results from the fourteen drugs assessed, the sensitivity of the assay was calculated at 90%, with a specificity of 75% and predictive capacity of 86%. These results support the potential use of this assay in screening for motility-related GADRs during early discovery phase, safety pharmacology assessment.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗