Search NASA⌕ Search

SEARCH · Search NASA

Results for “variational method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Scaling Structured Multigrid to 500K+ Cores Through Coarse-Grid Redistribution

The effcient solution of sparse, linear systems resulting from the discretization of partial differential equations is crucial to the performance of many physics-based simulations. The algorithmic optimality of multilevel approaches for common discretizations makes them a good candidate for an efficient parallel solver. Yet, modern architectures for high-performance computing systems continue to challenge the parallel scalability of multilevel solvers. While algebraic multigrid methods are robust for solving a variety of problems, the increasing importance of data locality and cost of data movement in modern architectures motivates the need to carefully exploit structure in the problem. Robust logically structured variational multigrid methods, such as Black Box Multigrid (BoxMG), maintain structure throughout the multigrid hierarchy. This avoids indirection and increased coarse- grid communication costs typical in parallel algebraic multigrid. Nevertheless, the parallel scalability of structured multigrid is challenged by coarse-grid problems where the overhead in communication dominates computation. In this paper, an algorithm is introduced for redistributing coarse-grid problems through incremental agglomeration. Guided by a predictive performance model, this algorithm provides robust redistribution decisions for structured multilevel solvers. A two-dimensional diffusion problem is used to demonstrate the significant gain in performance of this algorithm over the previous approach that used agglomeration to one processor. In addition, the parallel scalability of this approach

97 MATHEMATICS AND COMPUTING↗

A COMPARISON OF STELLAR ELEMENTAL ABUNDANCE TECHNIQUES AND MEASUREMENTS

Stellar elemental abundances are important for understanding the fundamental properties of a star or stellar group, such as age and evolutionary history, as well as the composition of an orbiting planet. However, as abundance measurement techniques have progressed, there has been little standardization between individual methods and their comparisons. As a result, different stellar abundance procedures determine measurements that vary beyond the quoted error for the same elements within the same stars. The purpose of this paper is to better understand the systematic variations between methods and offer recommendations for producing more accurate results in the future. We invited a number of participants from around the world (Australia, Portugal, Sweden, Switzerland, and the United States) to calculate 10 element abundances (C, O, Na, Mg, Al, Si, Fe, Ni, Ba, and Eu) using the same stellar spectra for four stars (HD 361, HD 10700, HD 121504, and HD 202206). Each group produced measurements for each star using (1) their own autonomous techniques, (2) standardized stellar parameters, (3) a standardized line list, and (4) both standardized parameters and a line list. We present the resulting stellar parameters, absolute abundances, and a metric of data similarity that quantifies the homogeneity of the data. We conclude that standardization of some kind, particularly stellar parameters, improves the consistency between methods. However, because results did not converge as more free parameters were standardized, it is clear there are inherent issues within the techniques that need to be reconciled. Therefore, we encourage more conversation and transparency within the community such that stellar abundance determinations can be reproducible as well as accurate and precise.

79 ASTRONOMY AND ASTROPHYSICS↗

TH-A-18C-02: An Electrostatic Model for Assessment of Joint Space Morphology in Cone-Beam CT

Purpose: High-resolution cone-beam CT (CBCT) of the extremities presents a potentially valuable basis for image-based biomarkers of arthritis, trauma, and risk of injury. We present a new method for 3D joint space analysis that exploits the high isotropic spatial resolution of CBCT and is sensitive to small changes in disease-related morphology. Methods: The approach uses an “electrostatic” model in which joint surfaces (e.g., distal femur and proximal tibia) are labeled as charge densities between which the electric field is solved by approximation to the Laplace equation. The method yields a unique solution determined by the field lines across the “capacitor” and is hypothesized to be more sensitive than conventional (Sharp) scores and immune to degeneracies that limit simple distance-along-axis or closest-point analysis. The algorithm was validated in CBCT phantom images and applied in two clinical scenarios: osteoarthritis (OA, change in loadbearing tibiofemoral joint space); and assessment of injury risk (correlation of 3D joint space to tibial slope). Results: Joint space maps computed from the electrostatic model were accurate to within the voxel size (0.26 mm). The method highlighted subtle regions of morphological change that would likely be missed by conventional scalar metrics. Regions of subtle cartilage erosion were well quantified, and the method confidently discriminated OA and non-OA cohorts. 3D joint space maps correlated well with tibial slope and provide a new basis for principal component analysis of loadbearing injury risk. Runtime was less than 5 min (235×235×121 voxel subvolume in Matlab). Conclusion: A new method for joint space assessment was reported as a possible image-based biomarker of subtle articular change. The algorithm yields accurate quantitation of the joint in a manner that is robust against operator and patient setup variation. The method shows promising initial results in ongoing trials of CBCT in osteoarthritis, rheumatoid arthritis, and injury risk assessment. Research supported by R01 and R21 grants from the National Institutes of Health, academic-industry partnership with Carestream Health, and a grant from the US Army Natick Soldier Research, Development and Engineering Center.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

TH-AB-202-08: A Robust Real-Time Surface Reconstruction Method On Point Clouds Captured From a 3D Surface Photogrammetry System

Purpose: Surface photogrammetry (e.g. VisionRT, C-Rad) provides a noninvasive way to obtain high-frequency measurement for patient motion monitoring in radiotherapy. This work aims to develop a real-time surface reconstruction method on the acquired point clouds, whose acquisitions are subject to noise and missing measurements. In contrast to existing surface reconstruction methods that are usually computationally expensive, the proposed method reconstructs continuous surfaces with comparable accuracy in real-time. Methods: The key idea in our method is to solve and propagate a sparse linear relationship from the point cloud (measurement) manifold to the surface (reconstruction) manifold, taking advantage of the similarity in local geometric topology in both manifolds. With consistent point cloud acquisition, we propose a sparse regression (SR) model to directly approximate the target point cloud as a sparse linear combination from the training set, building the point correspondences by the iterative closest point (ICP) method. To accommodate changing noise levels and/or presence of inconsistent occlusions, we further propose a modified sparse regression (MSR) model to account for the large and sparse error built by ICP, with a Laplacian prior. We evaluated our method on both clinical acquired point clouds under consistent conditions and simulated point clouds with inconsistent occlusions. The reconstruction accuracy was evaluated w.r.t. root-mean-squared-error, by comparing the reconstructed surfaces against those from the variational reconstruction method. Results: On clinical point clouds, both the SR and MSR models achieved sub-millimeter accuracy, with mean reconstruction time reduced from 82.23 seconds to 0.52 seconds and 0.94 seconds, respectively. On simulated point cloud with inconsistent occlusions, the MSR model has demonstrated its advantage in achieving consistent performance despite the introduced occlusions. Conclusion: We have developed a real-time and robust surface reconstruction method on point clouds acquired by photogrammetry systems. It serves an important enabling step for real-time motion tracking in radiotherapy. This work is supported in part by NIH grant R01 CA169102-02.

60 APPLIED LIFE SCIENCES↗

A Novel Noise-Aware Classical Optimizer for Variational Quantum Algorithms

A key component of variational quantum algorithms (VQAs) is the choice of classical optimizer employed to update the parameterization of an ansatz. It is well recognized that quantum algorithms will, for the foreseeable future, necessarily be run on noisy devices with limited fidelities. Thus, the evaluation of an objective function (e.g., the guiding function in the quantum approximate optimization algorithm (QAOA) or the expectation of the electronic Hamiltonian in variational quantum eigensolver (VQE)) required by a classical optimizer is subject not only to stochastic error from estimating an expected value but also to error resulting from intermittent hardware noise. Model-based derivative-free optimization methods have emerged as popular choices of a classical optimizer in the noisy VQA setting, based on empirical studies. However, these optimization methods were not explicitly designed with the consideration of noise. In this work we adapt recent developments from the “noise-aware numerical optimization” literature to these commonly used derivative-free model-based methods. We introduce the key defining characteristics of these novel noise-aware derivative-free model-based methods that separate them from standard model-based methods. In conclusion, we study an implementation of such noise-aware derivative-free model-based methods and compare its performance on demonstrative VQA simulations to classical solvers packaged in scikit-quant.

classical optimizers↗

Implementation of hybrid finite element method based transport solver in GRIFFIN

A new transport solver option based on the hybrid FEM (HFEM) was implemented in GRIFFIN, the MOOSE-based reactor analysis code, as an effort to support routine core design calculations for advanced reactor applications. The HFEM formulation with P{sub N} (spherical harmonics expansion), akin to the variational nodal method, is effective for solving a spatially homogenized problem with strong transport effect. The residual and Jacobian evaluations of the HFEM weak form were derived and successfully implemented in GRIFFIN, having the diffusion and the PN options available in the new HFEM based transport solver. The performance was tested with the simplified ABTR benchmark problems. The results indicate that the HFEM-based transport solver is a feasible option for solving problems with spatially homogenized and strong streaming by providing superior accuracy with a proper p-refinement. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Ab-initio calculation of structural, electronic, and optical characterizations of the intermetallic trialuminides ScAl{sub 3} compound

We present first-principles study of the electronic and the optical properties for the intermetallic trialuminides ScAl{sub 3} compound using the full-potential linear augmented plane wave method within density-functional theory. We have employed the generalized gradient approximation (GGA), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for calculating the electronic band structure and optical properties. The electronic specific heat coefficient ({gamma}), which is a function of density of states, can be calculated from the density of states at Fermi energy N(E{sub F}). The N(E{sub F}) of the phase L1{sub 2} is found to be lower than that of D0{sub 22} structure which confirms the stability of L1{sub 2} structure. We found that the dispersion of the band structure of D0{sub 22} is denser than L1{sub 2} phase. The linear optical properties were calculated. The evaluations are based on calculations of the energy band structure. - Graphical abstract: Crystal structure of L1{sub 2} (a) and D0{sub 22} (b) phases of ScAl{sub 3} compound.

36 MATERIALS SCIENCE↗

Ca-intercalated graphite as a hydrogen storage material: Stability against decomposition into CaH{sub 2} and graphite

We have used calculations based on density functional theory to investigate the energetics of hydrogen absorption in calcium-intercalated graphites. We focus particularly on the absorption energy and the stability of the hydrogenated material with respect to decomposition into graphite and calcium hydride, which is essential if this material is to be used for practical H{sub 2} storage. The calculations are performed with two commonly used approximations for the exchange-correlation energies. Our calculations confirm earlier predictions that the absorption energy is approximately -0.2 to -0.4 eV, which is favourable for practical use of Ca-intercalated graphite as a hydrogen storage medium. However, we find that the hydrogenated material is strongly unstable against decomposition. Our results therefore explain recent experiments which show that H{sub 2} does not remain stable in CaC{sub 6} but instead forms a hydride plus graphite. - Graphical abstract: The hydrogenation of Ca-graphite (left) results in its decomposition into pure graphite (middle) and CaH{sub 2} (right). Highlights: > We investigate the stability of hydrogenated Ca-intercalated graphite with DFT. > Dissociated H absorption in CaC{sub 6} is most favourable, with reasonable binding energies. > Molecular H{sub 2} absorption is most favourable in CaC{sub 8} and CaC{sub 14}. > We find all scenarios are unstable against decomposition into CaH{sub 2} and graphite. > The decomposition will be strongly exothermic in agreement with experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab-initio crystal structure prediction. A case study: NaBH{sub 4}

Crystal structure prediction from first principles is still one of the most challenging and interesting issue in condensed matter science. we explored the potential energy surface of NaBH{sub 4} by a combined ab-initio approach, based on global structure optimizations and quantum chemistry. In particular, we used simulated annealing (SA) and density functional theory (DFT) calculations. The methodology enabled the identification of several local minima, of which the global minimum corresponded to the tetragonal ground-state structure (P4{sub 2}/nmc), and the prediction of higher energy stable structures, among them a monoclinic (Pm) one was identified to be 22.75 kJ/mol above the ground-state at T=298 K. In between, orthorhombic and cubic structures were recovered, in particular those with Pnma and F4-bar 3m symmetries. - Graphical abstract: The total electron energy difference of the calculated stable structures. Here, the tetragonal (IT 137) and the monoclinic (IT 6) symmetry groups corresponded to the lowest and the highest energy structures, respectively. Highlights: > Potential energy surface of NaBH{sub 4} is investigated. > This is done a combination of global structure optimizations based on simulated annealing and density functional calculations. > We successfully reproduced experimentally found tetragonal and orthorhombic structures of NaBH{sub 4}. > Furthermore, we found a new stable high energy structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Remarks on the Complexity of the Schroedinger Equation

The solutions of the electronic Schroedinger equation are high-dimensional objects depending on 3N variables, three for each of the N electrons under consideration. It is therefore rather surprising that simple expansions of the electronic wave functions can be constructed whose convergence rate, measured in terms of the number of determinants involved, is independent of the number of electrons and does not fall below that for a two- or even that for a one-electron system approximated in the same way. In this sense, the complexity of the electronic Schroedinger equation does not exceed that of an equation in three space dimensions. A short report on these developments is given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical properties of water at high temperature

We calculate optical properties of water along the principal Hugoniot curve from ambient conditions up to temperatures of 130 000 K with density functional theory (DFT) and the Kubo-Greenwood formula. The effect of the exchange correlation functional is examined by comparing the generalized gradient approximation with a hybrid functional that contains Fock exchange. We find noticeable but moderate differences between the respective results which decrease rapidly above 80 000 K. The reflectivity along the principal Hugoniot is calculated and a good qualitative but fair quantitative agreement with available experimental data is found. Our results are of general relevance for calculations of optical properties with DFT at zero and elevated temperature.

36 MATERIALS SCIENCE↗

Effect of Boron doping on the electronic properties of the fullerenes of different sizes

We report the results of the effect of Boron doping in C{sub n}; n = 28, 32, 36, 40, 44, 50 and 60 using the first principle calculation based on density functional theory. The HOMO-LUMO gap changes significantly with the decreasing fullerene size below C{sub 60}, with maximum gap observed for C{sub 32}. The HOMO-LUMO gap of Boron doped fullerenes varies significantly w.r.t. pure fullerenes. Also, the gap decreases for C{sub n-m}B{sub m}X, the boron doped fullerenes with exohedral alkali metals for n = 28, 32, 36, 40, 44, 50 and 60; m = 1 to 4; X = Li, Na and K. The Mulliken charge transfer from the exohedral alkali metals towards the various fullerene cages is altered marginally by the boron doping in fullerenes and follows the order K>Na>Li.

36 MATERIALS SCIENCE↗

Self-trapping of a Fermi superfluid in a double-well potential in the Bose-Einstein-condensate-unitarity crossover

We derive a generalized Gross-Pitaevskii density-functional equation appropriate to study the Bose-Einstein condensate (BEC) of dimers formed of singlet spin-half Fermi pairs in the BEC-unitarity crossover while the dimer-dimer scattering length a changes from 0 to infinity. Using an effective one-dimensional form of this equation, we study the phenomenon of dynamical self-trapping of a cigar-shaped Fermi superfluid in the entire BEC-unitarity crossover in a double-well potential. A simple two-mode model is constructed to provide analytical insights. We also discuss the consequence of our study on the self-trapping of an atomic BEC in a double-well potential.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Density-potential mapping in time-dependent density-functional theory

The key questions of uniqueness and existence in time-dependent density-functional theory are usually formulated only for potentials and densities that are analytic in time. Simple examples, standard in quantum mechanics, lead, however, to nonanalyticities. We reformulate these questions in terms of a nonlinear Schroedinger equation with a potential that depends nonlocally on the wave function.

74 ATOMIC AND MOLECULAR PHYSICS↗

Pauli potential from Heilmann-Lieb electron density obtained by summing hydrogenic closed-shell densities over the entire bound-state spectrum

Independently, in the mid-1980s, several groups proposed to bosonize the density-functional theory (DFT) for fermions by writing a Schroedinger equation for the density amplitude {rho}(r){sup 1/2}, with {rho}(r) as the ground-state electron density, the central tool of DFT. The resulting differential equation has the DFT one-body potential V(r) modified by an additive term V{sub P}(r) where P denotes Pauli. To gain insight into the form of the Pauli potential V{sub P}(r), here, we invoke the known Coulombic density, {rho}{sub {infinity}}(r) say, calculated analytically by Heilmann and Lieb (HL), by summation over the entire hydrogenic bound-state spectrum. We show that V{sub P{infinity}}(r) has simple limits for both r tends to infinity and r approaching zero. In particular, at large r, V{sub P{infinity}}(r) precisely cancels the attractive Coulomb potential -Ze{sup 2}/r, leaving V(r)+V{sub P{infinity}}(r) of O(r{sup -2}) as r tends to infinity. The HL density {rho}{sub {infinity}}(r) is finally used numerically to display V{sub P{infinity}}(r) for all r values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydrogen Dissociation and Spillover on Individual Isolated Palladium Atoms

Using a combination of low-temperature scanning tunneling microscopy and density functional theory it is demonstrated how the nature of an inert host metal of an alloy can affect the thermodynamics and kinetics of a reaction pathway in a much more profound way than simply a dilution, electronic, or geometric effect. This study reveals that individual, isolated Pd atoms can promote H{sub 2} dissociation and spillover onto a Cu(111) surface, but that the same mechanism is not observed for an identical array of Pd atoms in Au(111).

36 MATERIALS SCIENCE↗

Packing microstructure and local density variations of experimental and computational pebble beds

In pebble bed type nuclear reactors the fuel is contained in graphite pebbles, which form a randomly stacked bed with a non-uniform packing density. These variations can influence local coolant flow and power density and are a possible cause of hotspots. To analyse local density variations computational methods are needed that can generate randomly stacked pebble beds with a realistic packing structure on a pebble-to-pebble level. We first compare various properties of the local packing structure of a computed bed with those of an image made using computer aided X-ray tomography, looking at properties in the bulk of the bed and near the wall separately. Especially for the bulk of the bed, properties of the computed bed show good comparison with the scanned bed and with literature, giving confidence our method generates beds with realistic packing microstructure. Results also show the packing structure is different near the wall than in the bulk of the bed, with pebbles near the wall forming ordered layers similar to hexagonal close packing. Next, variations in the local packing density are investigated by comparing probability density functions of the packing fraction of small clusters of pebbles throughout the bed. Especially near the wall large variations in local packing fractions exists, with a higher probability for both clusters of pebbles with low (<0.6) and high (>0.65) packing fraction, which could significantly affect flow rates and, together with higher power densities, could result in hotspots. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗