Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Vibration isolation technology: Sensitivity of selected classes of experiments to residual accelerations

The solution was sought of a 2-D axisymmetric moving boundary problem for the sensitivity of isothermal and nonisothermal liquid columns and the sensitivity of thermo-capillary flows to buoyancy driven convection caused by residual accelerations. The sensitivity of a variety of space experiments to residual accelerations are examined. In all the cases discussed, the sensitivity is related to the dynamic response of a fluid. In some cases the sensitivity can be defined by the magnitude of the response of the velocity field. This response may involve motion of the fluid associated with internal density gradients, or the motion of a free liquid surface. For fluids with internal density gradients, the type of acceleration to which the experiment is sensitive will depend on whether buoyancy driven convection must be small in comparison to other types of fluid motion (such as thermocapillary flow), or fluid motion must be suppressed or eliminated (such as in diffusion studies, or directional solidification experiments). The effect of the velocity on the composition and temperature field must be considered, particularly in the vicinity of the melt crystal interface. As far as the response to transient disturbances is concerned the sensitivity is determined by both the magnitude and frequency the acceleration and the characteristic momentum and solute diffusion times.

Alexander, J. Iwan D.↗

Diffusive shock acceleration of energetic electrons and the method of generations

The diffusive shock acceleration of energetic electrons at a plane shock is studied by means of the method of generations developed by Petukhov et al. (1986), where the particles are binned according to the number of particle acceleration cycles. The method emphasizes the cyclic character of the shock acceleration process, and takes into account the particle energy increment per cycle, the energy loss per cycle, and the escape probability of particles downstream of the shock. In the limit of a small fractional momentum gain per cycle, the method reproduces the known steady-state semianalytic solution for constant diffusion coefficients on both sides of the shock. It is demonstrated that the method may also be applied to time-dependent shock-acceleration problems.

Webb, G. M.↗

On the transport and acceleration of solar flare particles in a coronal loop

The turbulent environment of a flaring solar coronal loop directly affects the population of particles to be accelerated or already accelerated. Under the assumption of a uniform turbulent MHD wave field within the loop, the behavior of a particle distribution as it interacts with the turbulence is discussed, including particle precipitation to the footpoints of the loop and the evolution of the energy distribution as the particles undergo second-order stochastic acceleration. Two cases are discussed in detail: (1) particles spatially diffusing within the loop and precipitating with minimal acceleration in the short time scale of an impulsive event and (2) particles diffusing in both real and momentum space in a long duration event. Collisional losses due to ambient electrons are included. The gamma-ray flare of June 3, 1982 is modeled, and good agreement is obtained between predicted and observed time profiles if the loop length is 100,000 km with an intrinsic spatial diffusion time of 100-450 s. It follows that the production of high-energy neutrons and pi mesons extends over a time scale of 1000 s as observed.

Ryan, James M.↗

Dayside auroral particle acceleration mechanisms derived from Dynamics Explorer data

The characteristics of dayside electron acceleration regions, or inverted V's, and the nature of the field-aligned currents flowing in their vicinity are studied by using data from Dynamics Explorer hot-plasma and magnetic-field instruments. It is shown that dayside inverted-V events are common features of the mid-altitude extension of the boundary layer, which lies equatorward of the cusp. Upward-accelerated ionospheric electron beams are found to be carriers of downward region-1 currents even in regions of downward electron acceleration. It is not clear, however, how the upward-accelerated cold electron beams can exist above an apparent upward parallel electric field, since such a potential different would tend to confine the cold ionospheric electrons to low altitudes.

Burch, J. L.↗

Ion pickup, scattering, and stochastic acceleration in the cometary environment of P/Giacobini-Zinner

Observations and theory related to the scattering and acceleration of cometary pickup ions are reviewed with emphasis on Comet P/Giacobini-Zinner. A comparison of the regions upstream and downstream of the bow shock is made to assess the relative merits of each as a site for stochastic acceleration of ions above the pickup energy through interaction with low-frequency MHD waves. In the far upstream region the data are most consistent with a model where pickup ions generate a low level of MHD waves but remain relatively scatter-free. In the downstream region intense magnetic fluctuations gives rise to rapid isotropization of the ions and a second-order stochastic acceleration. The properties of the MHD power spectrum are related to the energetic ion spectrum in the framework of a leaky box model where the bulk of the acceleration occurs downstream of the shock throughout the cometosheath. Good agreement of the observations with theory is evident for both P/Giacobini-Zinner and P/Halley.

Barbosa, D. D.↗

Vapor transport and crystal growth of GeSe under normal and high acceleration

Physical vapor transport experiments on GeSe in the presence of 2 atm xenon and for a nominal temperature difference of 600-500 C were performed under 1 g, 5 g, and 10 g acceleration conditions. Under high acceleration and destabilizing conditions, the GeSe crystals are generally larger than those under 1 g, stabilizing, and up to three orders of magnitude larger in surface area than those under 1 g, destabilizing conditions. The mass transport rates of the 5 g and 10 g destabilizing experiments are considerably greater than those of the 10 g, stabilizing, and 1 g experiments. The observed increase in mass flux (under destabilizing conditions) with acceleration is significantly greater than the anticipated dependence (mass flux proportional to g exp 1/4) for laminar, boundary-layer driven free convection. In view of the considerable convection under high acceleration, destabilizing conditions, the surface morphology and bulk crystallinity of the large crystal platelets are unexpectedly good.

Wiedemeier, H.↗

Localized lower hybrid acceleration of ionospheric plasma

Observations of the transverse acceleration of ions in localized regions of intense lower hybrid waves at altitudes near 1000 km in the auroral ionosphere are reported. The acceleration regions are thin filaments with dimensions across geomagnetic field lines of about 50-100 m corresponding to 5-10 thermal ion gyroradii or one hot ion gyroradius. Within the acceleration region lower hybrid waves reach peak-to-peak amplitudes of 100-300 mV/m and ions are accelerated transversely with characteristic energies of the order of 10 eV. These observations are consistent with theories of lower hybrid wave collapse.

Kintner, P. M.↗

Plasma waves and transversely accelerated ions in the terrestrial ionosphere

Developments in measuring the physical mechanisms responsible for strongly driven transverse ion acceleration in the ionosphere are reviewed. Lower-hybrid waves and ion Bernstein waves can be associated very closely with transversely accelerated ions in the auroral ionosphere. In a recent development, very intense and localized lower-hybrid waves have been observed to produce transversely accelerated ions with characteristic energies of 10 eV. The case for current-driven electrostatic oxygen cyclotron waves producing transversely accelerated ions is less compelling.

Kintner, Paul M.↗

Characterization of ion accelerating systems on NASA LeRC's ion thrusters

An investigation is conducted regarding ion-accelerating systems for two NASA thrusters to study the limits of ion-extraction capability or perveance. A total of nine two-grid ion-accelerating systems are tested with the 30- and 50-cm-diam ring-cusp inert-gas ion thrusters emphasizing the extension of ion-extraction. The vacuum-tank testing is described using xenon, krypton, and argon propellants, and thruster performance is computed with attention given to theoretical design considerations. Reductions in perveance are noted with decreasing accelerator-hole-to-screen-hole diameter ratios. Perveance values vary indirectly with the ratio of discharge voltage to total accelerating voltage, and screen/accelerator electrode hole-pair alignment is also found to contribute to perveance values.

Rawlin, Vincent K.↗

Further study of the effect of the downstream plasma condition on accelerator grid erosion in an ion thruster

Further numerical results are presented of earlier particle-in-cell/Monte Carlo calculations of accelerator grid erosion in an ion thruster. A comparison between numerical and experimental results suggests that the accelerator grid impingement is primarily due to ions created far downstream from the accelerator grid. In particular, for the same experimental conditions as those of Monheiser and Wilbur at Colorado State University, it is found that a downstream plasma density of 2 x 10 exp 14/cu m is required to give the same ratio of accelerator grid impingement current to beam current (5 percent). For this condition, a potential hill is found in the downstream region of 2.5 V.

Peng, Xiaohang↗

Acceleration induced depriming and capillary rewetting of external artery heat pipes - Comparison with SHARE-II flight experiment

A combined analytical and numerical model for the analysis of the deprime and reprime/rewetting characteristics of two high-capacity external artery heat pipe designs undergoing externally induced accelerations was developed using several previously derived analytical expressions. Three distinct phases of the deprime and reprime/rewetting process were analyzed: (1) the effect of longitudinal accelerations on the depriming, (2) the time required for repriming of the liquid artery once the longitudinal acceleration has been terminated, and (3) the rewetting characteristics of the circumferential wall grooves. Combining the three processes, a technique was developed allowing the prediction of the effect of external acceleration on the characteristics of the external artery heat pipes. The predictions made with this technique agreed well with the microgravity flight results.

Ochterbeck, J. M.↗

Sounding rocket measurements of suprathermal ion acceleration

Transverse ion acceleration has been observed at rocket altitudes between 500 and 1000 km due to (1) the injection of 100-200 eV argon plasma; (2) auroral electron precipitation; and (3) the injection of electromagnetic waves. Field-aligned currents necessary to neutralize the plasma injection payloads and naturally occurring in the aurora could be responsible for the ions observed in (1) and (2) above. Associated with the aurora, both bulk heating and tail heating are observed, sometimes simultaneously. In this case, either different masses are accelerated or different mechanisms are responsible. The bulk heating is closely correlated with the aurora structure while tail heating is not so well correlated. Recent high-time-resolution rocket ion data have revealed that the transverse acceleration process is of very short duration (about 100 ms) and occurs in a very limited volume (a few hundred kilometers along B and on the order of the ion gyrodiameter across B). Such impulse acceleration events are correlated with waves near the lower hybrid resonance.

Arnoldy, Roger L.↗

Ion acceleration and abundance enhancements by electron beam instabilities in impulsive solar flares

We show that a nonrelativistic electron beam in a hydrogen-helium solar flare plasma will excite H(+) electromagnetic ion cyclotron, shear Alfven, and R-X waves, in addition to waves resulting from the two-stream instability. The H(+) electromagnetic ion cyclotron and shear Alfven waves are able to selectively accelerate ambient He-3 and Fe, respectively, to MeV energies through first harmonic gyroresonance, and thereby account for the large (He-3)/(He-4) and Fe/C ratios seen in the energetic particles from impulsive solar flares. In this model, separate heating and acceleration mechanisms for either He-3 or Fe are not required, and Fe acceleration is quite efficient since it does not need to occur by second harmonic gyroresonance. The combination of the other two unstable modes is able to accelerate ions to hundreds of MeV if the particles become trapped in an electrostatic potential well of a two-stream wave.

Miller, James A.↗

Role of failure-mechanism identification in accelerated testing

Accelerated life testing techniques provide a short-cut method to investigate the reliability of electronic devices with respect to certain dominant failure mechanisms that occur under normal operating conditions. However, accelerated tests have often been conducted without knowledge of the failure mechanisms and without ensuring that the test accelerated the same mechanism as that observed under normal operating conditions. This paper summarizes common failure mechanisms in electronic devices and packages and investigates possible failure mechanism shifting during accelerated testing.

Hu, J. M.↗

Design of a Ram Accelerator mass launch system

The Ram Accelerator, a chemically propelled, impulsive mass launch system, is presented as a viable concept for directly launching acceleration-insensitive payloads into low Earth orbit. The principles of propulsion are based on those of an airbreathing supersonic ramjet. The payload vehicle acts as the ramjet centerbody and travels through a fixed launch tube that acts as the ramjet outer cowling. The launch tube is filled with premixed gaseous fuel and oxidizer mixtures that combust at the base of the vehicle and produce thrust. Two modes of in-tube propulsion involving ramjet cycles are used in sequence to accelerate the vehicle from 0.7 km/sec to 9 km/sec. Requirements for placing a 2000 kg vehicle into a 500-km circular orbit, with a minimum amount of onboard rocket propellant for orbital maneuvers, are examined. It is shown that in-tube propulsion requirements dictate a launch tube length of 5.1 km to achieve an exit velocity of 9 km/sec, with peak accelerations not to exceed 1000 g's. Aerodynamic heating due to atmospheric transit requires minimal ablative protection and the vehicle retains a large percentage of its exit velocity. An indirect orbital insertion maneuver with aerobraking and two apogee burns is examined to minimize the required onboard propellant mass. An appropriate onboard propulsion system design to perform the required orbital maneuvers with minimum mass requirements is also determined. The structural designs of both the launch tube and the payload vehicle are examined using simple structural and finite element analysis for various materials.

Source record↗

A preliminary determination of normal accelerations on racing airplanes

Rules and methods for insuring safe structural strength of racing airplanes used in the major air meets in this country have recently been considered. Acceleration records made in racing airplanes during actual air races were therefore considered desirable, and the NACA undertook the measurement of acceleration of loads on airplanes during all conditions of flight. Accelerations were measured on four airplanes at the Miami All-American Races in January 1934 and January 1935. The airplanes were representative of the fastest limited and unlimited displacement racing airplanes in current use in this country. Records during two races, or flights, on the race course were obtained with each airplane. The maximum normal acceleration recorded was 6.2g and the minimum was -1.2g.

Scudder, N F↗

Effect of initial acceleration on the development of the flow field of an airfoil pitching at constant rate

We present results from a series of experiments where an airfoil is pitched at constant rate from 0 to 60 degrees angle of attack. It is well documented that the dynamic stall behavior of such an airfoil strongly depends on the nondimensional pitch rate K = dot-alpha C/(2U(sub infinity)), where C is the chord, dot-alpha the constant pitch rate, and U(sub infinity) the free stream speed. In reality, the actual motion of the airfoil deviates from the ideal ramp due to the finite acceleration and deceleration periods imposed by the damping of drive system and response characteristics of the airfoil. It is possible that the pitch rate alone may not suffice in describing the flow and that the details of the motion trajectory before achieving a desired constant pitch rate may also affect the processes involved in the dynamic stall phenomenon. The effects of acceleration and deceleration periods are investigated by systematically varing the acceleration magnitude and its duration through the initial acceleration phase to constant pitch rate. The magnitude and duration of deceleration needed to bring the airfoil motion to rest is similarly controlled.

Koochesfahani, M. M.↗

Three-grid accelerator system for an ion propulsion engine

An apparatus is presented for an ion engine comprising a three-grid accelerator system with the decelerator grid biased negative of the beam plasma. This arrangement substantially reduces the charge-exchange ion current reaching the accelerator grid at high tank pressures, which minimizes erosion of the accelerator grid due to charge exchange ion sputtering, known to be the major accelerator grid wear mechanism. An improved method for life testing ion engines is also provided using the disclosed apparatus. In addition, the invention can also be applied in materials processing.

Brophy, John R.↗