Search NASA⌕ Search

SEARCH · Search NASA

Results for “Alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Flow-aligned, single-shot fiber diffraction using a femtosecond X-ray free-electron laser

A major goal for X-ray free-electron laser (XFEL) based science is to elucidate structures of biological molecules without the need for crystals. Filament systems may provide some of the first single macromolecular structures elucidated by XFEL radiation, since they contain one-dimensional translational symmetry and thereby occupy the diffraction intensity region between the extremes of crystals and single molecules. Here, we demonstrate flow alignment of as few as 100 filaments ( Escherichia coli pili, F-actin, and amyloid fibrils), which when intersected by femtosecond X-ray pulses result in diffraction patterns similar to those obtained from classical fiber diffraction studies. We also determine that F-actin can be flow-aligned to a disorientation of approximately 5 degrees. Using this XFEL-based technique, we determine that gelsolin amyloids are comprised of stacked β-strands running perpendicular to the filament axis, and that a range of order from fibrillar to crystalline is discernable for individual α-synuclein amyloids.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Synergistic Alignment of Low Aspect‐Ratio π‐Conjugated Molecules Enables Exceptional UV–vis–NIR Polarization Detection

Abstract Polarization detection enhances signal contrast and is widely utilized in diverse advanced applications. An ongoing challenge is the development of high‐performance polarization‐sensitive photodetectors based on optically anisotropic organic semiconductors, particularly in the near‐infrared (NIR) region. While uniaxially aligned π‐conjugated polymers with high aspect ratios exhibit strong linear dichroism and have shown promise, their limited NIR performance and heavy reliance on polymer material now represent critical limitations. Here, a breakthrough is reported in achieving giant linear dichroism and exceptional polarization detection with low aspect‐ratios (AR) non‐fullerene small‐molecule (NFSM) acceptors, extending polarization sensitivity from the UV–vis to the NIR range. An impressive dichroic ratio of 27.1 at 605 nm and 12.0 at 780 nm is demonstrated. The maximum polarization photocurrent ratio is 11.2 at 780 nm under parallel versus perpendicular polarized light. This unprecedented performance originates from synergistic molecular alignment, wherein NFSMs significantly enhance the uniaxial orientation of both the polymer matrix and the NFSMs themselves during self‐assembly and thermal annealing. Besides, such a linear‐polarization‐sensitive photodetectors (LPS‐PDs) are showcased in generating degree‐of‐linear‐polarization imaging. The work establishes NFSMs as a viable material system for next‐generation of organic LPS‐PDs and provides fundamental insights into structural origins of polarization sensitivity in low AR organic semiconductors.

Xue, Yingying↗
DOE OSTI2023

Aligned fields double copy to Kerr-NUT-(A)dS

We find Abelian gauge fields that double copy to a large class of black hole spacetimes with spherical horizon topology known as the Kerr-NUT-(A)dS family. Using a multi-Kerr-Schild prescription, we extend the previously-known double copy structure for arbitrarily rotating general dimension black holes, to include NUT charges and an arbitrary cosmological constant. In all cases, these single copy gauge fields are ‘aligned fields’, because their nonzero components align with the principal tensor which generates the Killing structure of the spacetime. In five dimensions, we additionally derive the same single-copy field strengths via the Weyl double copy procedure.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Aligned yet large dipoles: a SMEFT study

We study a non-universal flavor scenario at the level of the Standard Model Effective Field Theory, according to which the matrix of Wilson coefficients cuW of an up-type electroweak quark dipole operator is aligned with the up-type Yukawa coupling. Such an alignment usually follows from the assumption of Minimal Flavor Violation (MFV), away from which we step by allowing the entries of cuW to be sizable along the first quark generations. A particular example, which we refer to as “inverse hierarchy MFV”, features Wilson coefficients inversely proportional to quark masses, and arises from BSM models respecting MFV and containing heavy fields that replicate the mass hierarchy of SM quarks. We then analyze the phenomenology driven by cuW at colliders and at lower-energy flavor experiments. We show that precision measurements of the process pp → Wh → γγℓν at FCC-hh could set an upper bound on |cuW| ≲ O (10 -2 )(Λ/TeV) 2 , with Λ the cutoff of the effective field theory. This bound is an order of magnitude stronger than the existing LHC bounds. Moreover, we estimate that Wh → b$\overline{b}$ℓν at HL-LHC could also give competitive bounds. In the low-energy regime, we consider bounds arising from rare kaon decays, which turn out to be loose, |c$_{uW}^{11}$ | < O (1)(Λ/TeV) 2 . We finally demonstrate that our flavor and operator assumptions can be derived from a weakly-coupled UV model, which we choose to simultaneously illustrate the UV origin of inverse hierarchy MFV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2017

Vertically-aligned Mn(OH) 2 nanosheet films for flexible all-solid-state electrochemical supercapacitors

We report that the arrangement of the electrode materials is a significant contributor for constructing high performance supercapacitor. Here, vertically-aligned Mn(OH) 2 nanosheet thin films were synthesized by cathodic electrodeposition technique on flexible Au coated polyethylene terephthalate substrates. Morphologies, microstructures, chemical compositions and valence state of the nanosheet films were characterized systematically. It shows that the nanosheets arranged vertically to the substrate, forming a porous nanowall structures and creating large open framework, which greatly facilitate the adsorption or diffusion of electrolyte ions for faradaic redox reaction. Electrochemical tests of the films show the specific capacitance as high as 240.2 F g -1 at 1.0 A g -1 . The films were employed to assemble symmetric all-solid-state supercapacitors with LiCl/PVA gel severed as solid electrolyte. Finally, the solid devices exhibit high volumetric capacitance of 39.3 mF cm -3 at the current density 0.3 mA cm -3 with robust cycling stability. The superior performance is attributed to the vertically-aligned configuration.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Nickel-Coated Super-Aligned Carbon Nanotube Reinforced Copper Composite for Improved Strength and Conductivity

Nickel (Ni)-coated super-aligned carbon nanotube (SACNT) films-reinforced copper (Cu) matrix composites were fabricated by electrodeposition. The microstructure, mechanical property and electrical conductivity of the prepared composites have been studied systematically. The results show that the mechanical properties of SACNT/Cu were significantly improved by coating SACNT with Ni. When the volume fraction of SACNT is 10.0%, the tensile strength and yield strength of the composite can reach 477.8 and 295.5 MPa, respectively, corresponding to 147 and 170% improvement compared to pure Cu prepared by the same method. Meanwhile, due to the super-aligned arrangement of SACNTs and the homogeneous distribution of Ni, which is not mixing or dissolving with Cu, the conductivities of all the Ni-coated SACNT-reinforced Cu composites are above 58% IACS, which is about 4 times higher than the results in previous research. The enhancement of the strength of the SACNT/Cu composites comes from the combined contribution of load transfer and grain refinement strengthening.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Aligned Carbon Nanotube Array Functionalization for Enhanced Atomic Layer Deposition of Platinum Electrocatalysts

Uniform metal deposition onto high surface area supports is a key challenge of developing successful efficient catalyst materials. Atomic layer deposition (ALD) circumvents permeation difficulties, but relies on gas-surface reactions to initiate growth. Our work demonstrates that modified surfaces within vertically aligned carbon nanotube (CNT) arrays, from plasma and molecular precursor treatments, can lead to improved catalyst deposition. Gas phase functionalization influences the number of ALD nucleation sites and the onset of ALD growth and, in turn, affects the uniformity of the coating along the length of the CNTs within the aligned arrays. The induced chemical changes for each functionalization route are identified by X-ray photoelectron and Raman spectroscopies. The most effective functionalization routes increase the prevalence of oxygen moieties at defect sites on the carbon surfaces. The striking effects of the functionalization are demonstrated with ALD Pt growth as a function of surface treatment and ALD cycles examined by electron microscopy of the arrays and the individual CNTs. Finally, we demonstrate applicability of these materials as fuel cell electrocatalysts and show that surface functionalization affects their performance towards oxygen reduction reaction.

08 HYDROGEN↗
DOE OSTI2018

Morphogenesis of aligned collagen fibers in the annulus fibrosus: Mammals versus avians

Highlights: • The cross-aligned collagen arrangement of the AF is created after the physical transition of the notochord to the NP. • Notochord is a passive element in the mouse and bulges due to the external forces. • Notochord acts as an active force-producing structure in chicken embryos. The mammalian intervertebral disc (IVD) consists of a gel-like, disordered nucleus pulposus (NP) surrounded by a highly ordered collagen structure, the annulus fibrosus (AF). While this concentric array of lamellae has been amply studied, its physical origin is poorly understood. The notochord is a rod-like organ located in the mid-line of the growing embryo and plays an essential role in IVD development. The aim of this study was to elucidate the effect of notochord development on the collagen fiber arrangement evolution in the AF. To that end, we studied IVD development in mouse embryos and compared these observations to those from chicken embryos, which do not form the typical laminar structure around the NP. In mouse, cross-aligned collagen arrangement of the AF forms from the sclerotome upon bulging of the notochord to become NP. By contrast, the notochord in the chicken embryo swells substantially without the physical restrictions of the future vertebrae and thus do not bulge. From these observations, we conclude that physical and geometrical constrictions are essential for the formation of the highly structured AF.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

Aligned-SWCNT film laminated nanocomposites: Role of the film on mechanical and electrical properties

Here in this study, well-aligned single-walled carbon nanotube (SWCNT) films were utilized as lamellae to prepare a multifunctional nanocomposite by a feasible ‘layer-by-layer’ preparation method. This structural design can not only dramatically reduce the agglomeration effect of SWCNTs, but also achieve high in-plane stiffness. It was found that the well-aligned SWCNT films contribute to the high stress-transfer between CNTs and present good wettability with epoxy matrix, thereby improving the mechanical enhancement. Interestingly, this laminated structure possesses distinct electrical behaviors under different loading conditions. The electrical resistance linearly increases with the increase of in-plane tensile strain but is insensitive to bending. This work could provide in-depth understanding on the mechanical and electrical properties of CNT-based laminated nanocomposites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Twinning-mediated anomalous alignment of rutile films revealed by synchrotron X-ray nanodiffraction

Nanotwin structures in materials engender fascinating exotic properties. However, twinning usually alter the crystal orientation, resulting in random orientation and limited performances. Here, we report a well-aligned rutile TiO 2 nanotwin film with superior preferential orientation than its isostructural substrate. By means of the synchrotron X-ray Laue nanodiffraction technique, the crystal orientation, twin boundaries, and deviatoric stresses of the film were quantitatively imaged at unprecedented spatial resolution to unravel the underlying mechanism of this anomalous alignment. Massive {101}-type rutile nanotwins were observed, and a crystallographic relationship of the heteroepitaxy was proposed. The rapid twinning and twin-controlled heteroepitaxy are responsible for the texture improvement. This work would open up opportunities for rational design of better twin-based functional materials, and implies the powerful capabilities of X-ray nanodiffraction technique for multidisciplinary applications.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Investigations on the growth and characterization of vertically aligned zinc oxide nanowires by radio frequency magnetronsputtering

Undoped vertically aligned ZnO nanowires have been grown on silicon (111) substrates by the rf magnetron sputtering technique without metal catalyst. The diameter, length and density distributions of the nanowires have been analyzed with respect to the different growth durations. The tapering of the nanowires is observed for the growth duration of 120 min owing to the insufficient adatoms on the growth front. In the X-ray diffraction pattern, the dominant (002) peak with narrow full width at half maximum (FWHM) of ZnO nanowires indicates the c-axis orientation and high crystalline nature with hexagonal wurtzite crystal structure. The narrow FWHM of E{sub 2}{sup low} and E{sub 2}{sup high} phonon modes (1.4 and 9.1 cm{sup −1}) provide an additional evidence for the high crystalline and optical properties of the nanowires. The low temperature photoluminescence spectra are dominated by the green emission at∼2.28 eV induced by the electron transitions between shallow donor and acceptor energy levels. - Graphical abstract: Coalescence free vertically aligned ZnO nanowires have been grown on silicon (111) substrate by the radio frequency magnetron sputtering technique. Highlights: ► ZnO nanowires have been grown by rf magnetron sputtering. ► A morphologically superior and coalescence free ZnO nanowires have been realized. ► ZnO nanowires exhibit hexagonal wurtzite crystal structure. ► A dominant visible emission indicates the presence of point defects in nanowires.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Well-aligned polycrystalline lanthanum silicate oxyapatite grown by reactive diffusion between solid La{sub 2}SiO{sub 5} and gases [SiO+1/2O{sub 2}]

The c-axis-oriented polycrystalline lanthanum silicate oxyapatite, La{sub 9.48}(Si{sub 5.89}□{sub 0.11})O{sub 26} (□ denotes a vacancy in the Si site), was successfully prepared by the reactive diffusion between randomly grain-oriented La{sub 2}SiO{sub 5} polycrystal and [SiO+1/2O{sub 2}] gases at 1873 K in Ar atmosphere. The polycrystal was characterized using optical microscopy, scanning electron microscopy equipped with energy dispersive X-ray spectroscopy, micro-Raman spectroscopy, X-ray diffractometry, and impedance spectroscopy. The crystal structure (space group P6{sub 3}/m) showed the deficiency of Si site at ca. 1.9%. The bulk oxide-ion conductivity along the grain-alignment direction steadily increased from 9.2 × 10{sup −3} to 1.17 × 10{sup −2} S/cm with increasing temperature from 923 to 1073 K. The activation energy of conduction was 0.23(2) eV. - Graphical abstract: We have successfully prepared the highly c-axis-oriented polycrystalline La{sub 9.48}(Si{sub 5.89}□{sub 0.11})O{sub 26} by the reactive diffusion between randomly grain-oriented La{sub 2}SiO{sub 5} polycrystal and [SiO + 1/2O{sub 2}] gases at 1873 K in Ar atmosphere. The crystal structure (space group P6{sub 3}/m) showed the deficiency of Si site of ca. 1.9%. - Highlights: • The c-axis-oriented polycrystalline La{sub 9.48}(Si{sub 5.89}□{sub 0.11})O{sub 26} is successfully prepared. • Crystal structure of La{sub 9.48}(Si{sub 5.89}□{sub 0.11})O{sub 26} is determined by single-crystal XRD. • The polycrystal shows relatively high oxide ion conductivity along the common c-axis. • Reactive diffusion is successfully used for the preparation of grain-aligned ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Low-temperature growth of well-aligned ZnO nanorods/nanowires on flexible graphite sheet and their photoluminescence properties

Highlights: ► Well-aligned ZnO nanostructures were grown on flexible graphite sheets at 500–650 °C. ► ZnO nanostructures are formed via self-catalytic vapor–solid process assisted by immiscibility of ZnO with graphite. ► The ZnO nanostructures show intensive green emission. ► The photoluminescence property can be easily tuned by changing growth condition or annealing treatment. -- Abstract: We have grown large-scale well-aligned ZnO nanorods/nanowires on commercial flexible graphite sheet (FGS) at low temperature via chemical vapor deposition method. The products were characterized by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. The effects of the growth temperature and oxygen flow rate on the morphology of ZnO nanostructures have been investigated. The growth mechanism of ZnO is found to be a self-catalytic vapor–solid process assisted by the immiscibility of ZnO with graphite. The as-grown ZnO/FGS products show strong green emission and their photoluminescence properties can be tuned by changing growth condition or annealing treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Synthesis of vertically aligned boron nitride nanosheets using CVD method

Highlights: ► The synthesized boron nitride nanosheets (BNNSs) are vertically aligned and very thin. ► No electrical field is applied in the CVD process. ► The thin BNNSs show a low turn-on field of 6.5 V μm{sup −1} and emit strong UV light. -- Abstract: Boron nitride nanosheets (BNNSs) protruding from boron nitride (BN) films were synthesized on silicon substrates by chemical vapor deposition technique from a gas mixture of BCl{sub 3}–NH{sub 3}–H{sub 2}–N{sub 2}. Parts of the as-grown nanosheets were vertically aligned on the BN films. The morphology and structure of the synthesized BNNSs were characterized by scanning electron microscopy, transmission electron microscopy, and Fourier transformation infrared spectroscopy. The chemical composition was studied by energy dispersive spectroscopy and X-ray photoelectron spectroscopy. Cathodoluminescence spectra revealed that the product emitted strong UV light with a broad band ranging from 250 to 400 nm. Field-emission characteristic of the product shows a low turn-on field of 6.5 V μm{sup −1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Drift Chamber Alignment using Cosmic Rays

The Collider Detector at Fermilab (CDF) is a general-purpose experimental apparatus with an inner tracking detector for measuring charged particles, surrounded by a calorimeter for measurements of electromagnetic and hadronic showers, and a muon detector system. We present a technique for, and results of, a precise relative alignment of the drift chamber wires of the CDF tracker. This alignment has been an important component of the track momentum calibration, which is the basis for the charged-lepton calibration for the measurement of the W boson mass at CDF.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Prolate-to-oblate transition and backbending along the yrast line induced by quasiparticle alignment

The yrast lines in Kr isotopes with N = 42, 44, and 46 are investigated in a beyond mean field framework with both prolate-oblate coexistence and quasiparticle alignment taken into account. Quasiparticle orbitals with high-j and low-Ω on the oblate side are shown to be responsible for the sharp backbending observed in 82Kr, by driving the yrast shape from prolate to oblate. This suggests that quasiparticle alignment may not be neglected in the investigation of the shape evolution along the yrast line.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Impact of globally spin-aligned vector mesons on the search for the chiral magnetic effect in heavy-ion collisions

In high-energy heavy-ion collisions, the chiral magnetic effect (CME) is predicted to arise from the interplay between the chirality imbalance of quarks in the nuclear medium and the intense magnetic field, and will cause a charge separation along the magnetic field direction. While the search for the CME is still ongoing in experiments at Relativistic Heavy Ion Collider (RHIC) and the Large Hadron Collider (LHC), the CME-sensitive observables need to be scrutinized to exclude the non-CME contributions. In this work, we examine the influence of globally spin-aligned ρ mesons on the γ 112 correlator, the R Ψ 2 (ΔS) correlator, and the signed balance functions, via a toy model and a multiphase transport model (AMPT). The global spin alignment of vector mesons could originate from non-CME mechanisms in heavy-ion collisions, and is characterized by the 00-component of the spin density matrix, ρ 00 . Here, we find that the CME observables show similar dependence on ρ 00 , and could receive a positive (negative) contribution from ρ-decay pions, if the ρ 00 of ρ mesons is larger (smaller) than 1/3. Since pions are the most abundant particles in such collisions, the ρ 00 measurements for ρ mesons become crucial to the interpretation of the CME data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Band alignment of front contact layers for high-efficiency CdTe solar cells

Resistive oxide materials play an important role in the front contact of CdTe solar cells. The high-resistance transparent (HRT) or “buffer” layer has been used extensively in CdTe thin-film photovoltaics to enable a reduction in CdS thickness while maintaining near-maximum device voltage and fill factor. SnO 2 - and ZnO-based alloys were tested as HRT layers on a fluorine-doped tin oxide transparent conducting oxide. SnO 2 -based alloy HRT layers were deposited via atmospheric pressure chemical vapor deposition (APCVD). Alloying ZnO with MgO to create MgxZn 1–x O (MZO) via radio-frequency sputter deposition was explored as a way to reduce the electron affinity of ZnO HRT layers. Additionally, to fully understand the behavior of these materials, many devices were fabricated with either no CdS layer, a sublimated CdS layer, or a sputtered, oxygenated CdS layer. MZO layers resulted in high open-circuit voltage and device efficiency even with the complete elimination of the CdS layer. In both HRT systems, controlling electron affinity to optimize front contact band alignment is an important consideration. Band measurements using photoelectron spectroscopy and synchrotron techniques correlate band alignment measurements with efficiency parameters in the design of HRT and CdS layers.

14 SOLAR ENERGY↗