Search NASA⌕ Search

SEARCH · Search NASA

Results for “CHI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Satellite observation and mapping of wintertime ozone variability in the lower stratosphere

Comparison is made between 30 mbar ozone fields that are generated by a transport chemistry model utilizing the winds from the Goddard Space Flight Center stratospheric data assimilation system (STRATAN), observations from the LIMS instrument on Nimbus-7, and the ozone fields that result from 'flying a mathematical simulation of LIMS observations through the transport chemistry model ozone fields. The modeled ozone fields were found to resemble the LIMS observations, but the model fields show much more temporal and spatial structure than do the LIMS observations. The 'satellite mapped' model results resemble the LIMS observations much more closely. These results are very consistent with the earlier discussions of satellite space-time sampling by Salby.

Geller, Marvin A.↗
NASA NTRS1992

On the Gibbs phenomenon 1: Recovering exponential accuracy from the Fourier partial sum of a non-periodic analytic function

It is well known that the Fourier series of an analytic or periodic function, truncated after 2N+1 terms, converges exponentially with N, even in the maximum norm, although the function is still analytic. This is known as the Gibbs phenomenon. Here, we show that the first 2N+1 Fourier coefficients contain enough information about the function, so that an exponentially convergent approximation (in the maximum norm) can be constructed.

Gottlieb, David↗
NASA NTRS1992

Superconductivity devices: Commercial use of space

The high T(sub c) superconducting ceramic materials, developed in 1987, are now being extensively investigated for a variety of engineering applications. These applications include such devices as conducting links, rotating and linear bearings, sensors, filters, switches, high Q cavities, magnets, and motors. Some of these devices take advantage of the material's ability to lose all electrical resistance at a critical temperature, T(sub c), while others make use of the repulsion forces generated between the magnetic field of a permanent magnet and a superconductor which is cooled below its T(sub c), Meissner effect. This report describes the work accomplished to date by: (1) reviewing the present state of the art in actuator technology, (2) evaluating processing and fabrication of high strain electrostrictive materials, and (3) testing these electrostrictive materials.

Haertling, Gene↗
NASA NTRS1992

Screen printed Y and Bi-based superconductors

High T(sub c) superconducting thick film was prepared by screen printing process. Y-based (YBa2Cu3O(7 - x)) superconducting thick films were printed on 211/Al2O3, SNT/Al2O3, and YSZ substrates. Because of poor adhesion of the superconducting thick films to 211/Al2O3 and SNT/Al2O3 substrates, relatively low T(sub c) and J(sub c) values were obtained from the films printed on these substrates. Critical temperatures of YBa2Cu3O(7 - x) thick films deposited on 211/Al2O3 and SNT/Al2O3 substrates were about 80 K. The critical current densities of these films were less than 2 A/cm(exp 2). Higher T(sub c) and J(sub c) films were printed on the YSZ substrates; T(sub c) = 86.4 K and J(sub c) = 50.4 A/cm(exp 2). Multiple lead samples were also prepared on the YSZ substrates. These showed lower T(sub c) and J(sub c) values than plain samples. The heat treatment conditions of the multiple lead samples are still under investigation. Bi-based superconductor thick films have been obtained so far. Improving the superconducting properties of the BSCCO screen printed thick films will be emphasized in future work.

Haertling, Gene H.↗
NASA NTRS1992

Resolution properties of the Fourier method for discontinuous waves

In this paper we discuss the wave-resolution properties of the Fourier approximations of a wave function with discontinuities. It is well known that a minimum of two points per wave is needed to resolve a periodic wave function using Fourier expansions. For Chebyshev approximations of a wave function, a minimum of pi points per wave is needed. Here we obtain an estimate for the minimum number of points per wave to resolve a discontinuous wave based on its Fourier coefficients. In our recent work on overcoming the Gibbs phenomenon, we have shown that the Fourier coefficients of a discontinuous function contain enough information to reconstruct with exponential accuracy the coefficient of a rapidly converging Gegenbauer expansion. We therefore study the resolution properties of a Gegenbauer expansion where both the number of terms and the order increase.

Gottlieb, David↗
NASA NTRS1992

Nonlinearly stable compact schemes for shock calculations

The applications of high-order, compact finite difference methods in shock calculations are discussed. The main concern is to define a local mean which will serve as a reference for introducing a local nonlinear limiting to control spurious numerical oscillations while maintaining the formal accuracy of the scheme. For scalar conservation laws, the resulting schemes can be proven total-variation stable in one space dimension and maximum-norm stable in multiple space dimensions. Numerical examples are shown to verify accuracy and stability of such schemes for problems containing shocks. These ideas can also be applied to other implicit schemes such as the continuous Galerkin finite element methods.

Cockburn, Bernardo↗
NASA NTRS1992

Vacuum-isolation vessel and method for measurement of thermal noise in microphones

The vacuum isolation vessel and method in accordance with the present invention are used to accurately measure thermal noise in microphones. The apparatus and method could be used in a microphone calibration facility or any facility used for testing microphones. Thermal noise is measured to determine the minimum detectable sound pressure by the microphone. Conventional isolation apparatus and methods have been unable to provide an acoustically quiet and substantially vibration free environment for accurately measuring thermal noise. In the present invention, an isolation vessel assembly comprises a vacuum sealed outer vessel, a vacuum sealed inner vessel, and an interior suspension assembly coupled between the outer and inner vessels for suspending the inner vessel within the outer vessel. A noise measurement system records thermal noise data from the isolation vessel assembly. A vacuum system creates a vacuum between an internal surface of the outer vessel and an external surface of the inner vessel. The present invention thus provides an acoustically quiet environment due to the vacuum created between the inner and outer vessels and a substantially vibration free environment due to the suspension assembly suspending the inner vessel within the outer vessel. The thermal noise in the microphone, effectively isolated according to the invention, can be accurately measured.

Zuckerwar, Allan J.↗
NASA NTRS1992

A numerical resolution study of high order essentially non-oscillatory schemes applied to incompressible flow

High order essentially non-oscillatory (ENO) schemes, originally designed for compressible flow and in general for hyperbolic conservation laws, are applied to incompressible Euler and Navier-Stokes equations with periodic boundary conditions. The projection to divergence-free velocity fields is achieved by fourth order central differences through Fast Fourier Transforms (FFT) and a mild high-order filtering. The objective of this work is to assess the resolution of ENO schemes for large scale features of the flow when a coarse grid is used and small scale features of the flow, such as shears and roll-ups, are not fully resolved. It is found that high-order ENO schemes remain stable under such situations and quantities related to large-scale features, such as the total circulation around the roll-up region, are adequately resolved.

Weinan, E.↗
NASA NTRS1992

Superconductivity devices: Commercial use of space

High T sub C superconducting thick film were prepared by a screen printing process. Y-based (YBa2Cu3O(7-x) superconducting thick film were printed on 211/Al2O3, SNT/Al2O3, and YSZ substrates. Because of poor adhesion of the superconductor thick films to 211/Al2O3 and SNT/Al2O3 substrates, relatively low T sub C and J sub C values were obtained from the films printed on these substrates. Critical temperatures (T sub C) of YBa2Cu3O(7-x) thick films deposited on 211/Al2O3 and SNT/Al2O3 substrates were about 80 K. The critical current densities (J sub C) of these films were less than 2 A/sq cm. Higher T sub C and J sub C YBa2Cu3O(7-x) thick films were printed on YSZ substrates. A YBa2Cu3O(7-x) thick film with T sub C=86.4 and J sub C= 50.4 A/sq cm was prepared by printing the film on YSZ substrate and firing at 990 C for 10 minutes. Multiple-lead samples were also prepared on the YSZ substrates. The multiple-lead samples showed lower T sub C and/or J sub C values than those of the plain samples. The electrical properties of YBa2Cu3O(7-x) thick films were determined by the microstructures of the films. The YBa2Cu3O(7-x) thick films printed on the YSZ substrates, which had the best properties among the films printed on the three different kinds of substrates, had the highest density and the best particle interconnection. The YBa2Cu3O(7-x) thick films with preferred orientation in (001) direction were obtained on the YSZ substrates. Cracks, which retard the properties of the films, were found from the films deposited on the YSZ substrates. Currently, a MSZ (Magnesium Stabilized Zirconia) substrate, which had higher thermal expansion coefficient than the YSZ substrate, is used as substrate for the YBa2Cu3O(7-x) thick film in order to eliminate the cracks on the film. Bi-based superconductor thick films were printed on polycrystalline MgO and YSZ substrates. Interactions between BSCCO thick films and the YSZ substrates were observed. Various buffer layer materials were applied onto the substrates in order to avoid the interactions between the BSCCO thick films and the ZrO2-based substrates. So far, a BSCCO printed on MgO substrate with T Sub C=89K was obtained. The J sub C of the film was lower than 0.1 A/sq cm by reason of poor interconnectivity of the BSCCO particles.

Haertling, Gene↗
NASA NTRS1991

Neutral Buoyancy Portable Life Support System performance study

The Neutral Buoyancy Portable Life Support System (NBPSS) has been designed to support astronaut underwater training activities associated with EVA operations. The performance of competing NBPSS configurations has been analyzed on the basis of a modified 'Metabolic Man' program. NBPSS success is dependent on the development of novel cryogen supply tank and liquid-cooling garment vaporizer. Attention is given to mass and thermal balances and the evaluation results for the vent-loop ejector and heat-exchanger designs.

Chang, Chi-Min↗
NASA NTRS1991

Low resistivity contacts to YBa2Cu3O(7-x) superconductors

Silver, gold, platinum, and palladium metals were investigated as electroding materials for the YBa2Cu3O(7-x) superconductors. Painting, embedding, and melting techniques were used to apply the electrodes. Contact resistivities were determined by: (1) type of electrode; (2) firing conditions; and (3) application method. Electrodes fired for long times exhibited lower contact resistivities than those fired for short times. Low-resistivity contacts were found for silver and gold electrodes. Silver, which made good ohmic contact to the YBa2Cu3O(7-x) superconductor with low contact resistivities was found to be the best electroding material among the materials evaluated in this investigation.

Hsi, Chi-Shiung↗
NASA NTRS1992

The local properties of ocean surface waves by the phase-time method

A new approach using phase information to view and study the properties of frequency modulation, wave group structures, and wave breaking is presented. The method is applied to ocean wave time series data and a new type of wave group (containing the large 'rogue' waves) is identified. The method also has the capability of broad applications in the analysis of time series data in general.

Huang, Norden E.↗
NASA NTRS1991

Sizing the science data processing requirements for EOS

The methodology used in the compilation and synthesis of baseline science requirements associated with the 30 + EOS (Earth Observing System) instruments and over 2,400 EOS data products (both output and required input) proposed by EOS investigators is discussed. A brief background on EOS and the EOS Data and Information System (EOSDIS) is presented, and the approach is outlined in terms of a multilayer model. The methodology used to compile, synthesize, and tabulate requirements within the model is described. The principal benefit of this approach is the reduction of effort needed to update the analysis and maintain the accuracy of the science data processing requirements in response to changes in EOS platforms, instruments, data products, processing center allocations, or other model input parameters. The spreadsheets used in the model provide a compact representation, thereby facilitating review and presentation of the information content.

Wharton, Stephen W.↗
NASA NTRS1992

Periodic structures with time-varying loads

A new method is described for generating and predicting the power scattered at multiple frequencies from a periodic array excited by a monochromatic incident plane wave. The scattered power is predicted by developing an equivalent circuit representation from the exact method of moment solution of the unloaded periodic problem and then employing a modified method of moments approach to predict the scattered fields due to time-varying loads. An advantage of this method is that the generality of the equivalent circuit can be exploited to study the effects of different loads on the power scattered in the harmonic frequencies with a minimal amount of effort. The method can also be applied to multiple incident frequencies.

Epp, Larry W.↗
NASA NTRS1992

A numerical method for systems of conservation laws of mixed type admitting hyperbolic flux splitting

The present treatment of elliptic regions via hyperbolic flux-splitting and high order methods proposes a flux splitting in which the corresponding Jacobians have real and positive/negative eigenvalues. While resembling the flux splitting used in hyperbolic systems, the present generalization of such splitting to elliptic regions allows the handling of mixed-type systems in a unified and heuristically stable fashion. The van der Waals fluid-dynamics equation is used. Convergence with good resolution to weak solutions for various Riemann problems are observed.

Shu, Chi-Wang↗
NASA NTRS1992

Edge technique - Theory and application to the lidar measurement of atmospheric wind

The paper describes the theory of the edge technique, a powerful method for the detection and measurement of small frequency shifts. It can be employed with a lidar to obtain range-resolved measurements of wind with high accuracy and high vertical resolution. The technique can be applied to measure wind with a lidar by using either the aerosol or molecular backscattered signal. Simulations for a ground-based lidar at 1.06 micron using reasonable instrumental parameters show an accuracy of the vector components of the wind which is better than 0.5 m/s from the ground to an altitude of 20 km for a 100-m vertical resolution and a 100-shot average.

Korb, C. L.↗
NASA NTRS1992

Effects of microgravity and tail suspension on enzymes of individual soleus and tibialis anterior fibers

Selected enzymes of energy metabolism were measured in random individual fibers of soleus and tibialis anterior (TA) muscles from rats exposed for 2 wk to spaceflight (F) aboard Cosmos 2044 or tail suspension (T) and from synchronous controls. Average size of soleus fibers (dry weight per unit length) was reduced 37 percent in F and T fibers; there was little change in Ta fibers. Enzyme changes were more pronounced in soleus than in TA fibers. Three enzymes characteristic of fast-twitch muscles, pyruvate kinase, glycerol-3-phosphate dehydrogenase, and 1-phosphofructokinase, were elevated in F and T soleus fibers, but changes in phosphofructokinase were not statistically significant. In TA fibers analyzed for hexokinase, malate dehydrogenase, phosphohexoisomerase, and pyruvate kinase, only hexokinase and malate dehydrogenase showed significant changes. Hexokinase incresed 83 percent in one of two T muscles. Enzyme data for TA fibers typed by myosin adenosinetriphosphatase were more informative: phosphofructokinase, phosphorylase, and glycerol-3-phosphate dehydrogenase were increased in type IIn fibers of either F or T muscles or both. Malate dehydrogenase was not changed in fibers of any type in either F or T muscle.

Chi, Maggie M.-Y.↗
NASA NTRS1991

Model-based task planning system for a space laboratory environment

This paper describes the design of a model-based autonomous planning system that will enable robots to manage a space-borne chemical laboratory. In a model-based planning system, knowledge is encapsulated in the form of models at the various layers to support the predefined system objectives. Thus the model-based approach can be considered as an extended planning paradigm which is able to base its planning, control, diagnosis, repair, and other activities on a variety of objectives-related models. A System Entity Structure/Model Base framework is employed to support autonomous system design through the ability to generate a family of planning alternatives as well as to build hierarchical event-based control structures. The model base is a multilevel, multiabstraction, and multiformalism system organized through the use of system morphisms to integrate related models.

Chi, Sung-Do↗