SEARCH · Search NASA

Results for “CONICAL FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

All sources NASA NTRS DOE OSTI

NASA NTRS1992

A database of aerothermal measurements in hypersonic flow for CFD validation

This paper presents an experimental database selected and compiled from aerothermal measurements obtained on basic model configurations on which fundamental flow phenomena could be most easily examined. The experimental studies were conducted in hypersonic flows in 48-inch, 96-inch, and 6-foot shock tunnels. A special computer program was constructed to provide easy access to the measurements in the database as well as the means to plot the measurements and compare them with imported data. The database contains tabulations of model configurations, freestream conditions, and measurements of heat transfer, pressure, and skin friction for each of the studies selected for inclusion. The first segment contains measurements in laminar flow emphasizing shock-wave boundary-layer interaction. In the second segment, measurements in transitional flows over flat plates and cones are given. The third segment comprises measurements in regions of shock-wave/turbulent-boundary-layer interactions. Studies of the effects of surface roughness of nosetips and conical afterbodies are presented in the fourth segment of the database. Detailed measurements in regions of shock/shock boundary layer interaction are contained in the fifth segment. Measurements in regions of wall jet and transpiration cooling are presented in the final two segments.

Holden, M. S.↗

NASA NTRS1993

PNS predictions of axisymmetric hypersonic blunt-body and afterbody flowfields

A new space-marching full-body PNS algorithm capable of treating the complete blunt-body and afterbody flowfields over typical wide-bodied configurations is developed and demonstrated. A hybrid differencing scheme involving Flux-Vector Splitting (FVS) across embedded shocks and flowfield discontinuities, and central differencing in smooth (shock-free) regions is used. It is demonstrated that this new full-body PNS scheme can be marched from the spherical stagnation point over the entire body using bow-shock capturing, and provides an efficient and effective way for predicting blunt-body flowfields for various reentry application. The Mach 20 flow over a 30-deg sphere cone is predicted and comparisons are made with an existing VSL scheme for the blunt-body region and an existing PNS scheme for the conical afterbody region. The predicted flowfield and surface-measurable quantities are in excellent agreement, and demonstrate the accuracy and efficiency of the new full-body PNS scheme.

Bhutta, Bilal A.↗

NASA NTRS1980

Careful numerical study of flowfields about asymmetric external conical corners

A numerical study of the flowfield about asymmetrical external axial corners formed by the juncture of swept compressive wedges is presented. The geometrical configuration allows a unified treatment of external corners typical of delta wings and rectangular inlets. The study investigates how the flow transitions from a symmetrical flowfield with a cross-flow stagnation point at the corner to an asymmetrical flowfield for which the flow spills over the corner. The effects of leading-edge sweep, wedge compression, and corner radius are investigated.

Salas, M. D.↗

NASA NTRS1989

Arcjet nozzle design impacts

The effect of nozzle configuration on the operating characteristics of a low power dc arcjet thruster was determined. A conical nozzle with a 30 deg converging angle, a 20 deg diverging angle, and an area ratio of 225 served as the baseline case. Variations on the geometry included bell-shaped contours both up and downstream, and a downstream trumpet-shaped contour. The nozzles were operated over a range of specific power near that anticipated for on-orbit operation. Mass flow rate, thrust, current, and voltage were monitored to provide accurate comparisons between nozzles. The upstream contour was found to have minimal effect on arcjet operation. It was determined that the contour of the divergent section of the nozzle, that serves as the anode, was very important in determining the location of arc attachment, and thus had a significant impact on arcjet performance. The conical nozzle was judged to have the optimal current/voltage characteristics and produced the best performance of the nozzles tested.

Curran, Francis M.↗

NASA NTRS1989

Arcjet Nozzle Design Impacts

Curran, Francis M.↗

NASA NTRS1972

Air film cooling in a nonadiabatic wall conical nozzle.

Experimental data for an air-film cooled conical nozzle operating with a heated-air main stream and a water-cooled wall confirm the validity of Lieu's (1964) method for correlating film cooling data in the accelerated flow of a nonadiabatic-wall nozzle. The film cooling effectiveness modified for nonadiabatic walls by Lieu can be used to correlate film cooling under the condition that the main-stream to coolant velocity ratio at the slot is about 1. Such a ratio provides the optimum cooling effectiveness.

Boldman, D. R.↗

NASA NTRS1979

Nonlinear Fourier algorithm applied to solving equations of gravitational gas dynamics

Two dimensional gas flow problems were reduced to an approximating system of common differential equations, which were solved by a standard procedure of the Runge-Kutta type. A theorem of the existence of stationary conical shock waves with the cone vertex in the gravitating center was proved.

Kolosov, B. I.↗

NASA NTRS1958

Performance of an All-internal Conical Compression Inlet with Annular Throat Bleed at Mach Number 5.0

An all-internal conical compression inlet with annular bleed at the throat was investigated at Mach 5.0 and zero angle of attack. The minimum contraction ratio of the supersonic diffuser, coincident with a mass-flow ratio of 1.0, was determined to be 0.084 as compared with the isentropic contraction ratio of 0.04 at Mach 5.0. The over-all inlet performance was very sensitive to the amount of annular bleed at the throat because of the extensive boundary layer. For example, the critical recovery varied from 41 percent with 6-percent bleed to 59 percent with 25-percent bleed. Decreasing the spacing between the supersonic and subsonic diffusers increased the critical mass-flow ratio but reduced the range of subcritical mass-flow regulation. A constant-area section was required ahead of the subsonic diffuser in order to obtain reasonable performance. An inlet-engine net-thrust analysis indicated that the optimum performance occurred with from 20- to 25-percent bleed, depending on how the bypassed air was handled.

Stitt, Leonard E.↗

NASA NTRS1993

Magnetosheath-ionospheric plasma interactions in the cusp/cleft. 1: Observations of modulated injections and upwelling ion fluxes

In situ observations of the cusp/cleft are important as they allow a direct investigation of coupling solar wind energy to the ionosphere, plus they provide an opportunity for the remote sensing of the magnetopause. High time resolution observations from Dynamic Explorer 1 are used to investigate these processes. It is shown that in the spacecraft frame the injection is modulated or pulsating with a period of approximately 18-30 s with the injection duration possibly being as short as 6 s. This modulation indicates that there may be fast time scale and/or short scale length processes modulating the injection of the magnetosheath plasma across the magnetopause. In addition, the pulsating injection is seen to modulate the outflow of upwelling ionospheric ions to the magnetosphere. These upwelling ions are seen prior to the magnetosheath ion injection and therefore are not directly created by the injection. During the injection itself, the intensity of the upwelling ions is seen to dramatically decrease but their average energy increases. At end of the magnetosheath injections, the intensity of the upwelling ion flux is seen to increase to levels comparable to levels prior to the magnetosheath injection. On two occasions during the encounter, the particle fluxes are sufficiently high that enhanced downward flows of perpendicularly heated ions, of presumably ionospheric origin, are observed in association with a reduction in the intensity of the upwelling ions. These observations are probably the first detection of downward conics and suggest that there is momentum transfer between the magnetosheath and ionospheric ions. This momentum transfer eventually leads to an enhanced outflow of heated ionospheric plasma where their energy has been raised from a few tens of eV to a few hundred eV.

Winglee, R. M.↗

NASA NTRS1996

Computational Noise Study of a Supersonic Short Conical Plug-Nozzle Jet

A computational jet noise study of a short conical plug-nozzle (CPN) is presented. The CPN has an exit diameter of 45 mm and the geometrical configuration closely approximates that of an ideal contoured plug-nozzle having shockless flow at pressure ratio xi(sub d) = 3.62. The gasdynamics of the jet flows have been predicted using the CFD code, NPARC with k-epsilon turbulence model; these data are then used for noise computations based on the modified GE/MGB code. The study covers a range of pressure ratio, 2.0 less than or equal to xi less than or equal to 5.0. The agreement of the computational results with the available experimental data is favorable. The results indicate consistent noise reduction effectiveness of the CPN as compared to equivalent convergent, convergent-divergent and ideal contoured plug nozzles at all pressure ratios. At design pressure ratio, codes predict noise levels within 4.0 dB of the measurements; and at off-design pressure ratios, in general, within 5.0 dB except at very high frequencies when deviations up to 10 dB are noted. The shock formation mechanism in the CPN jet is noted to be basically different from those in the convergent and CD nozzle jets.

Das, Indu S.↗

NASA NTRS1959

Flow Studies of Decelerators at Supersonic Speeds

Wind tunnel tests recorded the effect of decelerators on flow at various supersonic speeds. Rigid parachute models were tested for the effects of porosity, shroud length, and number of shrouds. Flexible model parachutes were tested for effects of porosity and conical-shaped canopy. Ribbon dive brakes on a missile-shaped body were tested for effect of tension cable type and ribbon flare type. The final test involved a plastic sphere on riser lines.

Source record↗

NASA NTRSDate not supplied

CFD Simulations of the IHF 13-Inch Nozzle Flow: 55° Sphere-Cone Model, Manufactured Fences and Gaps

Introduction to Arc-Jets and Testing - Arc-jets are primary facilities to test the performance of thermal protection systems (TPS) in an aerothermodynamic heating environment - Free jet test configuration with stagnation coupon or wedge models—conical nozzles - Semi-free jet test configuration with panel test articles—semi-elliptical nozzles A large-scale sphere-cone model, though similar to stagnation models, enables testing TPS materials in combinations of heat flux, pressure and shear different from those accessible in various stagnation and wedge tests

Arc-jets↗

NASA NTRS1991

Static pressure measurements in A 30 kWe class arcjet

A series of cold and hot flow static pressure measurements have been made as a function of distance along the principal axis of a 30 kWe arcjet. During these experiments, the background pressure was varied from atmospheric pressure to less than 1 Torr. The experimental arcjet used in these tests had the same constrictor and conical nozzle dimensions as the baseline MOD-1 ammonia arcjet developed at NASA-JPL, but used nitrogen as the propellant gas. Comparison of the measured static pressure profiles with the arc erosion patterns on the anode surface showed that anode arc attachment points directly coincided with the minimum static pressure points. The dual voltage modes commonly observed in 30 kWe class arcjet thrusters are also believed to be caused by the presence of two pressure minima in the arcjet, one at the constrictor entrance and the other in the expansion nozzle. The static pressure profiles also suggest that the sonic flow transition occurs at the entrance to the nozzle, indicating the existence of very thick boundary layers in the arcjet constrictor.

Harris, William J.↗

NASA NTRS1987

Research in computational fluid dynamics

The numerical integration of quasi-one-dimensional unsteady flow problems which involve finite rate chemistry are discussed, and are expressed in terms of conservative form Euler and species conservation equations. Hypersonic viscous calculations for delta wing geometries is also examined. The conical Navier-Stokes equations model was selected in order to investigate the effects of viscous-inviscid interations. The more complete three-dimensional model is beyond the available computing resources. The flux vector splitting method with van Leer's MUSCL differencing is being used. Preliminary results were computed for several conditions.

Murman, Earll M.↗

NASA NTRS1975

Holographic flow visualization within a rotating compressor blade row

Rapid double-pulsed holographic techniques were used to visualize the shock configurations in the tip region of a lightly loaded, high tip speed fan stage. The holograms showed the passage shock emanating from the blade leading edge, a moderately strong conical shock originating at the intersection of the part span shroud leading edge and the blade suction surface, and a second conical shock originating at the intersection of the part span shroud and the blade pressure surface. Due to a limited viewing angle, the bow waves upstream of the rotor could not be observed, and only limited details of the trailing edge shocks were obtained. Reasonable details of the shock patterns were obtained from holograms which were made without extensive rig modifications. Results indicate that larger viewing windows and and holographic plates would permit a wider viewing angle and give much more coverage of the regions of interest. Also, shorter time delay for double-pulsed holograms is also desirable, and would minimize blade movement and give clearer holograms.

Benser, W. A.↗

NASA NTRS1992

Modeling of SSME fuel preburner ASI

The Augmented Spark Ignitor (ASI) is a LOX/H2/electrical spark system that functions as an ignition source and sustainer for stable combustion. It is used in the SSME preburner combustor, the SSME main combustion chamber, the J-1 and J-2 engines as well as proposed designs of the Space Transportation Main Engine (STME) main combustor and gas generators. In the SSME it is a long circular cylindrical chamber located along the Main Combustor centerline with a truncated conical dome at the top, which contains two oblique LOX injection ports and two spark plugs offset at 90 degrees. Hydrogen injection is through a number of nearly tangential slots downstream which creates a swirl flow intended to cool the AS1 chamber walls. Past incidents of erosion of the AS1 spark plugs have often led to the need for replacement of these very costly devices. Thus it is desirable to understand the complex reactive flow field within the AS1 both during the initial ignition transient and during the main stage steady state combustion (no sparking).

P Y Liang↗

NASA NTRS1944

Comparative Results of Tests on Several Different Types of Nozzles

This paper presents the results of tests conducted to determine the effect of the constructional elements of a Laval nozzle on the velocity and pressure distribution and the magnitude of the reaction force of the jet. The effect was studied of the shapes of the entrance section of the nozzle and three types of divergent sections: namely, straight cone, conoidal with cylindrical and piece and diffuser obtained computationally by a graphical method due to Professor F. I. Frankle. The effect of the divergence angle of the nozzle on the jet reaction was also investigated. The results of the investigation showed that the shape of the generator of the inner surface of the entrance part of the nozzle essentially has no effect on the character of the flow and on the reaction. The nozzle that was obtained by graphical computation assured the possibility of obtaining a flow for which the velocity of all the gas particles is parallel to the axis of symmetry of the nozzle, the reaction being on the average 2 to 3 percent greater than for the usual conical nozzle under the same conditions, For the conical nozzle the maximum reaction was obtained for a cone angle of 25deg to 27deg. At the end of this paper a sample computation is given by the graphical method. The tests were started at the beginning of 1936 and this paper was written at the same time.

Kisenko, M. S.↗

NASA NTRS1994

Design of a variable area diffuser for a 15-inch Mach 6 open-jet tunnel

The Langley 15-inch Mach 6 High Temperature Tunnel was recently converted from a Mach 10 Hypersonic Flow Apparatus. This conversion was effected to improve the capability of testing in Mach 6 air at relatively high reservoir temperatures not previously possible at Langley. Elevated temperatures allow the matching of the Mach numbers, Reynolds numbers, and ratio of wall-to-adiabatic-wall temperatures (TW/Taw) between this and the Langley 20-inch Mach 6 CF4 Tunnel. This ratio is also matched for Langley's 31-inch Mach 10 Tunnel and is an important parameter useful in the simulation of slender bodies such as National Aerospace Plane (NASP) configurations currently being studied. Having established the nozzle's operating characteristics, the decision was made to install another test section to provide model injection capability. This test section is an open-jet type, with an injection system capable of injecting a model from retracted position to nozzle centerline between 0.5 and 2 seconds. Preliminary calibrations with the new test section resulted in Tunnel blockage. This blockage phenomenon was eliminated when the conical center body in the diffuser was replaced. The issue then, is to provide a new and more efficient variable area diffuser configuration with the capability to withstand testing of larger models without sending the Tunnel into an unstart condition. Use of the 1-dimensional steady flow equation with due regard to friction and heat transfer was employed to estimate the required area ratios (exit area / throat area) in a variable area diffuser. Correlations between diffuser exit Mach number and area ratios, relative to the stagnation pressure ratios and diffuser inlet Mach number were derived. From these correlations, one can set upper and lower operating pressures and temperatures for a given diffuser throat area. In addition, they will provide appropriate input conditions for the full 3-dimensional computational fluid dynamics (CFD) code for further simulation studies.

Loney, Norman W.↗