Carbon Compounds/Liquid Hydrogen Fuels, Final Report
Liquid hydrogen propellant containing hydrocarbon colloids for nuclear propulsion systems
Vander Wall, E. M.↗
SEARCH · Search NASA
Results for “Colloids”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Inhibition of methanol cracking of Ti-6Al-4V foil - Effect of pretreatments with aqueous solutions of electrolytes
Methanol stress corrosion cracking of Ti-Al-V foil inhibited by pretreatment in aqueous solutions of electrolytes, discussing colloidal character of microcrystallites
Fugassi, P.↗
Insolubilized enzymes for food synthesis
Cellulose matrix with numerous enzyme-coated silica particles of colloidal size permanently bound at various sites within matrix was produced that has high activity and possesses requisite physical characteristics for filtration or column operations. Product also allows coupling step in synthesis of edible food to proceed under mild conditions.
Marshall, D. L.↗
The development and evaluation of a cobalt base oxidation resistant dispersion strengthened alloy
The Co-18Cr-20Ni-4 Vol % ThO2 powders were prepared by a flash drying selective reduction process starting with an aqueous solution of metal salts and colloidal thoria. Powders were consolidated and extruded into rods with a minimum density of 99% of theoretical. Swaging and annealing studies were conducted to determine the conditions that would lead to a product with high stress-rupture strength. The best process yielded a stress-rupture life of 7.2 hours at 10 KSI (69 MN sq m and 2000 F (1094 C). The alloy recrystallized to a duplex (coarse-fine) structure and thus did not exhibit the desired strength of 3000 hours at 15 KSI (103.5MN/sq m and 2000 F (1094 C).
Irani, K. K.↗
Satellite auxiliary-propulsion selection techniques. Addendum: A survey of auxiliary electric propulsion systems
A review of electric thrusters for satellite auxiliary propulsion was conducted at JPL during the past year. Comparisons of the various thrusters for attitude propulsion and east-west and north-south stationkeeping were made based upon performance, mass, power, and demonstrated life. Reliability and cost are also discussed. The method of electrical acceleration of propellant served to divide the thruster systems into two groups: electrostatic and electromagnetic. Ion and colloid thrusters fall within the electrostatically accelerated group while MPD and pulsed plasma thrusters comprise the electromagnetically accelerated group. The survey was confined to research in the United States with accent on flight and flight prototype systems.
Holcomb, L. B.↗
Symposium on Uranium Plasmas: Research and Applications, 2nd, Atlanta, Ga., November 15-17, 1971, Collection of Technical Papers.
Results of theoretical and applied research related to fissioning uranium plasmas. Topics examined include uranium plasma instabilities, diagnostic techniques, radiant heat transfer characteristics, nuclear pumping of lasers, and various fission engine concepts. Engineering aspects considered for open-cycle gas core engines include effects of buoyancy on fuel containment, flow and criticality problems, effects of injection conditions, and radiation hazards. The nuclear light bulb engine, the mini-cavity reactor, the dust-bed reactor, and the colloid core reactor are also examined in terms of design and control considerations. Individual items are abstracted in this issue.
Source record↗
An experimental facility for the visual study of turbulent flows.
An experimental technique which allows visual observations of the wall area in turbulent pipe flow is described in detail. It requires neither the introduction of any injection or measuring device into the flow nor the presence of a two-phase flow or of a non-Newtonian fluid. The technique involves suspending solid MgO particles of colloidal size in trichloroethylene and photographing their motions near the wall with a high speed movie camera moving with the flow. Trichloroethylene was chosen in order to eliminate the index of refraction problem in a curved wall. Evaluation of the technique including a discussion of limitations is included. Also the technique is compared with previous methods of visual observations of turbulent flow.
Brodkey, R. S.↗
Survey of auxiliary-propulsion systems for communications satellites.
In order to provide insight for the selection of attitude- and stationkeeping propulsion systems for future communications satellites, current auxiliary-propulsion systems are surveyed. Thruster systems specifically considered are stored gas, vaporizing ammonia/electrothermal, catalytic monopropellant hydrazine, electrothermal monopropellant hydrazine, plenum monopropellant hydrazine, ion, colloid, and pulsed plasma. Each of the thruster types is discussed in three sections: (1) description of thruster system and how it functions, (2) space flight experience, and (3) survey of state-of-the-art thrusters. In addition, a qualitative tabulation of thruster characteristics is included.
Holcomb, L. B.↗
Low thrust propulsion system effects on communication satellites.
Choice of type and placement of thrusters on spacecraft (s/c) should include consideration of their effects on other subsystems. Models are presented of the exhaust plumes of mercury, cesium, colloid, hydrazine, ammonia, and Teflon rockets. Effects arising from plume impingement on s/c surfaces, radio frequency interference, optical interference, and earth environmental contamination are discussed. Some constraints arise in the placement of mercury, cesium, and Teflon thrusters. Few problems exist with other thruster types, nor is earth contamination a problem.
Hall, D. F.↗
Reverse osmosis for wash water recovery in space vehicles.
Tests were carried out on both synthetic and real wash water derived from clothes laundry to determine the utility of reverse osmosis in recovering the water for recycle use. A blend membrane made from cellulose di- and triacetates, and a cross-linked cellulose acetate/methacrylate were evaluated. Both were found acceptable. A number of detergents were evaluated, including a cationic detergent, sodium dodecyl sulfate, potassium palmitate, and sodium dodecylbenzenesulfonate. The tests were all made at a temperature of 165 F to minimize microbial growth. Long-term (15 to 30 day) runs were made at 600 and 400 psi on laundry water which was pretreated either by alum addition and sand filtration or by filtration only through 0.5 micron filters. A 30-day run was made using a 2-in. diameter by 22-in. long spiral module at 400 psig with filtering as the pretreatment. The membrane fouling by colloidal matter was found to be controllable. The unit produced initially 55 gal/day and 27 gal/day after 30 days.
Lawrence, R. W.↗
Exploratory study of several advanced nuclear-MHD power plant systems.
In order for efficient multimegawatt closed cycle nuclear-MHD systems to become practical, long-life gas cooled reactors with exit temperatures of about 2500 K or higher must be developed. Four types of nuclear reactors which have the potential of achieving this goal are the NERVA-type solid core reactor, the colloid core (rotating fluidized bed) reactor, the 'light bulb' gas core reactor, and the 'coaxial flow' gas core reactor. Research programs aimed at developing these reactors have progressed rapidly in recent years so that prototype power reactors could be operating by 1980. Three types of power plant systems which use these reactors have been analyzed to determine the operating characteristics, critical parameters and performance of these power plants. Overall thermal efficiencies as high as 80% are projected, using an MHD turbine-compressor cycle with steam bottoming, and slightly lower efficiencies are projected for an MHD motor-compressor cycle.
Williams, J. R.↗
Recovery of nonferrous metals from scrap automobiles by magnetic fluid levitation.
Ferrofluids are colloidal dispersions of subdomain magnetic solids in carrier liquids. In the presence of a non-homogeneous magnetic field, ferrofluids exert a pressure on immersed nonmagnetic objects in the opposite sense of the field gradient. This pressure force can, when opposite to gravity, levitate objects of higher density than the ferrofluid. This levitation technique can be used to separate solids according to density. Its application to the separation of nonferrous metals from shredded automobiles has been demonstrated on a prototype of a full-scale separator. Its use to recover nonferrous metals from municipal solid wastes also seems practical.
Mir, L.↗
Liquid lubricants - functions and requirements
The state of liquid lubricant technology is discussed. The limit of present knowledge, especially in the boundary regime, is analyzed. Factors such as colloid behavior, viscoelastic effects, and relaxation times are investigated. Specific applications problems and some lubricant requirements which have not been met are reported.
Lansdown, A. R.↗
Technology utilization program report
The application of aerospace technology to the solution of public health and industrial problems is reported. Data cover: (1) development of an externally rechargeable cardiac pacemaker, (2) utilization of ferrofluids-colloidal suspensions of ferrite particles - in the efficient separation of nonferrous metals as Ni, Zn, Cu, and Al from shredded automobile scrap, and (3) development of a breathing system for fire fighters.
Source record↗
The action of macrosounds on graphite ore and derived products
A suspension of graphite ore, floated graphite, and the gangue left over from flotation were subjected to the action of macrosounds under determinant conditions. The following was found: (1) The graphite ore undergoes an efficient settling action. (2) The floated graphite is strongly crushed down to the dimensions of colloidal graphite. (3) The gangue left over from flotation can be further processed to recuperate graphite from its nuclei.
Bradeteanu, C.↗
Satellite nuclear power station: An engineering analysis
A nuclear-MHD power plant system which uses a compact non-breeder reactor to produce power in the multimegawatt range is analyzed. It is shown that, operated in synchronous orbit, the plant would transmit power safely to the ground by a microwave beam. Fuel reprocessing would take place in space, and no radioactive material would be returned to earth. Even the effect of a disastrous accident would have negligible effect on earth. A hydrogen moderated gas core reactor, or a colloid-core, or NERVA type reactor could also be used. The system is shown to approach closely the ideal of economical power without pollution.
Williams, J. R.↗
Long term flight electrodes
The reproducibility, stability, and methods of preparation for the various types and forms of biomedical electrodes are discussed. A critical and selective compilation of information on biological and/or physiological electrodes is presented. A discussion of plant hydrocolloids, clays, hydrophyllic colloids, synthetic waxes, and acrylic polymers is included.
Mosier, B.↗
Electric propulsion - Past history and future prospects
Studies of feasibility and flight mechanics of electric propulsion systems began around 1946. Conceptual systems design started in 1954, experimental development in 1958; flight tests in 1964 and 1970 proved the functioning of electric thrusters in space. Further development of ion thruster systems has concentrated on bombardment ionization in the U.S., and on radiofrequency, bombardment, and surface-contact ionization in West Germany, Great Britain, France, and the USSR. Electrothermal, plasma, and colloid thruster development has been pursued in many countries. Electric thrusters were used successfully during past years for satellite attitude control, and for prime propulsion of the Soviet spacecraft Yantar. Further applications for attitude and position control of satellites are planned.
Stuhlinger, E.↗