Search NASA⌕ Search

SEARCH · Search NASA

Results for “Crop yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Data for Redefining the Product Portfolio of Oilcane Bagasse Biorefinery: Recovering Natural Colorants, Vegetative Lipids and Sugars

:Bioenergy crops have been known for their ability to produce biofuels and bioproducts. In this study, the product portfolio of recently developed transgenic sugarcane (oilcane) bagasse has been redefined for recovering natural pigments (anthocyanins), sugars, and vegetative lipids. The total anthocyanin content in oilcane bagasse has been estimated as 92.9 ± 18.9 µg/g of dried bagasse with cyanidin-3-glucoside (13.5 ± 18.9 µg per g of dried bagasse) as the most prominent anthocyanin present. More than 85 % (w/w) of the total anthocyanins were recovered from oilcane bagasse at a pretreatment temperature of 150 °C for 15 min. These conditions for the hydrothermal pretreatment also led to a 2-fold increase in the glucose yield upon the enzymatic saccharification of the pretreated bagasse. Further, a 1.5-fold enrichment of the vegetative lipids was demonstrated in the pretreated residue. Re-defining green biorefineries with multiple high-value products in a zero-waste approach is the need of the hour for attaining sustainability.

Biomass Analytics↗
DOE OSTI2020

The practice and economics of hybrid poplar biomass production for biofuels and bioproducts in the Pacific Northwest

Hybrid poplar demonstration-scale farms were managed in Oregon, Washington, Idaho, and California to establish management practices, yields, harvesting methods, and the economics of biomass production. Yield during the 2-year establishment cycle averaged 3.5 dry Mg ha –1 year –1 increasing to 11.6 Mg ha –1 year –1 in the ensuing 3-year coppice cycle. Populus deltoides (Bartram ex Marsh.) × P. maximowiczii (Henry) varieties preformed best in Oregon during the coppice cycle with the best variety producing 18.1 Mg ha –1 year –1 , while P. ×generosa (Henry) varieties maximized yields in Washington at 22.1 Mg ha –1 year –1 . P. ×canadensis (Moench) varieties excelled in Idaho and California with upper yields of 13.6 Mg ha –1 year –1 and 12.9 Mg ha –1 year –1 , respectively. Stands were cut with a single-pass harvester 2 years after planting and a second time after 3 years of coppice growth; material capacity, limited by poor ground conditions, varied between 21.7 to 31.3 green Mg h –1 . Chemical composition averaged 1.87% inorganics, 7.74% extractives, 26.90% lignin, 38.07% glucan, 13.66% xylan, 1.61% galactan, 1.14% arabinan, and 2.76% mannan. Production costs (USD) projected over a 20-year rotation of six coppice cycles were $71.81 Mg –1 in Washington, $89.91 Mg –1 in Oregon, $98.76 Mg–1 in Idaho, and 179.07 Mg–1 in California. Here, land rental, establishment, crop care, harvest, transportation, and land restoration, respectively, accounted for 23%, 5%, 19%, 30%, 17%, and 6% of total feedstock cost. Farms were successfully restored to conditions existing before poplar conversion. In the absence of fertilization, increases in soil pH and decreases in nitrate-nitrogen, zinc, iron, and organic matter were consistently noted but could not be associated with poplar production alone.

09 BIOMASS FUELS↗
DOE OSTI2021

Science Breakthroughs 2030. Final report

Agriculture is a fundamental societal activity, characterized by many different landscapes, crops, markets, and participants. Food, agricultural, and biofuels products are central to the daily life of all citizens, though most do not recognize the fragility of the environment that brings forth this abundance. As is noted in the 2012 report from the President's Council of Advisors on Science and Technology, Agricultural Preparedness and the United States Agricultural Research Enterprise (PCAST, 2012) the food and agricultural system faces constant challenges in: Managing new pests, pathogens, and invasive plants. Increasing the efficiency of water use. Growing food in a changing climate. Reducing the environmental footprint of agriculture. Managing the production of bioenergy. Producing safe and nutritious food. Assisting with global food security and maintaining abundant yields. Science Breakthroughs 2030 was organized to identify the most compelling research directions in food and agriculture, in particular those empowered by the application of insights and tools from disciplines of science and engineering not typically associated with food and agricultural research. A committee appointed by the Chairman of the National Research Council explored ideas for research directions with input from the scientific community, with the objective of producing a report describing ambitious and achievable scientific pathways to address major problems and create new opportunities in food and agriculture. Following numerous meetings, a jamboree, and town hall, the appointed committee prepared a report that has subsequently become a reference for federal agencies supporting research in the food and agricultural space. It highlights five key areas for research investment with broad application across food and agriculture: integrated systems research; sensor development; data mining and information sciences, genomics; and the microbiome.

09 BIOMASS FUELS↗
DOE OSTI2024

Data for Natural Deep Eutectic Solvents (NADES) Assisted Deconstruction of Oilcane Bagasse for High Lipid and Sugar Recovery

In a novel approach, metabolically engineered sugarcane “Oilcane” has been investigated for fractionation of lipid and cellulose-rich pulp, using certain Natural deep eutectic solvents (NADES). The exploration of eco-friendly solvents are at the forefront of harnessing the biofuel potential of modern bioenergy crops. For this, six combinations of NADES were prepared using choline chloride (ChCl) as HBA and lactic acid (LA), oxalic acid (OA) and glycerol (Gly) as HBD and were further explored for pretreatment of oilcane bagasse in a molar ratio of 1:1 and 1:2. The impact of NADES ratio, biomass loading (10–50%), residence time (1–2 h), and temperature (90–140 °C) were evaluated for delignification, lipid content, sugar release after enzymatic hydrolysis. The finding demonstrated that under the optimal condition of ChCl: LA (1:2 molar ratio), 140 °C with 2 h retention time, the lipid content in the pre-treated substrate was increased to 2.5-fold (∼8% w/w) and > 80% glucose yield was achieved after 72 h of hydrolysis of pre-treated bagasse. High solid loading (∼50%) during pretreatment resulted in a similar glucose yield. Furthermore, recycling studies demonstrated that nearly 95 to 98% NADES could be recycled after each pretreatment for up to five consecutive cycles without any significant loss in chemical structure as confirmed by 1H NMR and FT IR. FT IR and XRD analyses of native and pre-treated biomass were performed to visualize the morphological changes during NADES pretreatment and their impact on sugar yield. The findings of the study may be used to establish NADES-based biorefinery for the valorization of lipids, and carbohydrates for fuels and chemicals production.

Conversion↗
DOE OSTI2024

Engineered reduction of S-adenosylmethionine alters lignin in sorghum

Abstract Background Lignin is an aromatic polymer deposited in secondary cell walls of higher plants to provide strength, rigidity, and hydrophobicity to vascular tissues. Due to its interconnections with cell wall polysaccharides, lignin plays important roles during plant growth and defense, but also has a negative impact on industrial processes aimed at obtaining monosaccharides from plant biomass. Engineering lignin offers a solution to this issue. For example, previous work showed that heterologous expression of a coliphage S -adenosylmethionine hydrolase (AdoMetase) was an effective approach to reduce lignin in the model plant Arabidopsis. The efficacy of this engineering strategy remains to be evaluated in bioenergy crops. Results We studied the impact of expressing AdoMetase on lignin synthesis in sorghum ( Sorghum bicolor L. Moench). Lignin content, monomer composition, and size, as well as biomass saccharification efficiency were determined in transgenic sorghum lines. The transcriptome and metabolome were analyzed in stems at three developmental stages. Plant growth and biomass composition was further evaluated under field conditions. Results evidenced that lignin was reduced by 18% in the best transgenic line, presumably due to reduced activity of the S -adenosylmethionine-dependent O -methyltransferases involved in lignin synthesis. The modified sorghum features altered lignin monomer composition and increased lignin molecular weights. The degree of methylation of glucuronic acid on xylan was reduced. These changes enabled a ~20% increase in glucose yield after biomass pretreatment and saccharification compared to wild type. RNA-seq and untargeted metabolomic analyses evidenced some pleiotropic effects associated with AdoMetase expression. The transgenic sorghum showed developmental delay and reduced biomass yields at harvest, especially under field growing conditions. Conclusions The expression of AdoMetase represents an effective lignin engineering approach in sorghum. However, considering that this strategy potentially impacts multiple S -adenosylmethionine-dependent methyltransferases, adequate promoters for fine-tuning AdoMetase expression will be needed to mitigate yield penalty.

Tian, Yang↗
DOE OSTI2026

Engineering Anti-Microbial Peptide Production in Fungi and Bioprocess Development (CRADA 502)

Crop Protection, specifically controlling agricultural diseases and pests, is essential for crop production at every agricultural scale. Biologics hold enormous potential in this equation to decrease use of more toxic pesticides. Currently, the widespread use of biologics in crop protection is severely hampered by the lack of available tools for their mass production. To ensure biologics are regulated under EPA Biopesticide regulations, the following must be true: The biopesticide is a naturally occurring substance or structurally similar and functionally identical to a naturally occurring substance with a history of exposure to humans and the environment demonstrating minimal toxicity. Since this pertains to the marketed product it is also essential that fermentation hosts have a history of exposure and safe use by humans This research focuses on developing a novel platform for the production and delivery of the cghSAMP peptide using the filamentous fungus Aspergillus niger. A. niger is a well-established industrial microorganism, widely recognized for its strong protein secretion capabilities, high-yield production of enzymes, and classification as a generally recognized as safe (GRAS) organism. By genetically modifying A. niger to express the cghSAMP peptide transgene, we aim to leverage the fungus's robust fermentation system to produce a high volume of the antimicrobial agent. This engineered system represents a potential breakthrough in sustainable disease management, offering an environmentally friendly method for localized application or large-scale production of a biopesticide designed to mitigate the effects of citrus greening disease. The main objectives of this project were: 1. Developing a high-yield and cost-efficient bioprocess to produce an AMP in a current ABF host or readily onboarded hosts. 2. Scale up the process in stirred tank reactors and produce at least 100 grams of AMP at 1- 5g/L

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Soybean rust‐resistant and tolerant varieties identified through the Pan‐African Trial Network

Abstract BACKGROUND The global demand for soybeans is increasing rapidly, with projections indicating an escalation of 70–80 million metric tons over the next decade. Sub‐Saharan Africa (SSA) contributes significantly to this growth, with soybean production increasing by 6.8% per year, outpacing the global average increase of 4.7%. Despite the expansion, soybean productivity in Africa remains less than half of the global average. This yield gap is largely due to diseases and pests, such as soybean rust, which can be particularly severe. Effective management of soybean rust depends on several factors, including resistant cultivars. However, there has been limited information on the rust‐resistance levels of African cultivars. To address this gap, the Pan‐African Trial network conducted soybean varietal trials across diverse locations. RESULT Analyzing data from 370 individual trials conducted between 2015–2022, the network identified 81 cultivars with sufficient rust‐resistance data. Six cultivars including, Black Hawk, Dundee, Egret, Heron, Ibis, and Peka 06 were found to be resistant, and 12 were classified as tolerant. CONCLUSION This research is a significant step forward in improving soybean productivity in Africa, and further assessments are being undertaken to address other crop production challenges in the region. © 2025 Society of Chemical Industry.

Favoretto, Vitor Rampazzo [Cenex Harvest States (C↗
DOE OSTI2023

Assessment of Potential Pennycress Availability and Suitable Sites for Sustainable Aviation Fuel Refineries in Ohio

Pennycress grain has a relatively high oil content (25–36%) and it is considered a desirable feedstock to produce sustainable aviation fuel (SAF). Pennycress crop can be integrated into the corn–soybean rotation as a winter cover crop in the midwestern U.S. to provide both ecosystem services and economic benefits for the farmers, while serving as a promising feedstock for SAF production. For pennycress-based SAF biorefineries to be established at the commercial scale, a sustainable design of the supply system is required to provide reliable information on feedstock availability and optimal facility locations. The objectives of this research were to assess the pennycress production potential in Ohio, and to identify the best locations to establish the SAF biorefineries. To estimate the pennycress production potential in Ohio, a geographic information system (GIS)-based model was developed using the spatially explicit six-year historical data on areas that were planted in the corn–soybean rotation for the period of 2013 through 2018, pennycress yield estimates from field-based experiments reported in the literature, and the soil productivity index for the region of study. Optimal SAF biorefinery locations were identified using a GIS-based location-allocation model. Annual land potentially available for pennycress production in Ohio was estimated to be ~0.6 million ha, which could produce ~1.1 million metric tons of pennycress grain as feedstock to produce ~210 million liters of SAF, depending on the pennycress yield level, oil content, and conversion efficiencies. In addition, the optimum locations for 12 biorefineries, each at an annual capacity of 18.9 million liters of SAF, were identified, and the average transportation distance was estimated to be 35 and 58 km for maximizing attendance and coverage conditions, respectively. The outcomes of this research would help minimize the risks associated with feedstock supply and cost variabilities for pennycress-based SAF production in the region.

Mousavi-Avval, Seyed Hashem↗
DOE OSTI2025

Constitutive down‐regulation of liguleless alleles in sorghum drives increased productivity and water use efficiency

Plant architecture influences the microenvironment throughout the canopy layer. Plants with a more erect leaf architecture allow for an increase in planting densities and allow more light to reach lower canopy leaves. This is predicted to increase crop carbon assimilation. Frictional resistance to wind reduces air movement in the lower canopy, resulting in higher humidity. By increasing the proportion of canopy photosynthesis in the more humid lower canopy, gains in the efficiency of water use might be expected, although this may be slightly offset by the more open erectophile form canopy. An anatomical feature in members of the Poaceae family that impacts leaf angle is the articulated junction of the sheath and blade, which also bares the ligule and auricles. Mutants, which lack ligules and auricles, show no articulation at this junction, resulting in leaves that are near vertical. In maize, these phenotypes termed liguleless result from null mutations of genes: ZmLG1 (Zm00001eb67740) and ZmLG2 (Zm00001eb147220). In sorghum, SbiRTx430.06G264300 (SbLG1) and SbiRTx430.03G392300 (SbLG2) are annotated as the respective maize homologues. A hair-pin element designed to down-regulate both SbLG1 and SbLG2 was introduced into the grain sorghum genotype RTx430. Derived transgenic events harbouring the hair-pin failed to develop ligules and displayed reduced leaf angles to the vertical, but less vertical than in null mutations. Under field settings, plots sown with these sorghum events having an erect architecture phenotype displayed an increase in photosynthesis in lower canopy levels, which led to increases in above-ground biomass and seed yield, without an increase in water use.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Data for Multisite Field Evaluation of Oil Accumulation and Agronomic Performance in Grain and Sweet Sorghums Engineered for Lipid Hyperaccumulation

Oil sorghum (OS) has been developed by engineering grain (TX430) and sweet (Ramada) genetic backgrounds to accumulate triacylglycerols (TAG) in vegetative tissues as an energy-dense feedstock for sustainable aviation fuel (SAF) and other biofuels. This study evaluated two TX430 OS lines (TxHO-2, TxHO-3) and two Ramada OS lines (RmHO-1, RmHO-2) alongside wild-type (WT) lines in NE and IL over 2 years (2023–2024) to quantify genotype × environment effects on agronomic performance and TAG accumulation. Across four environments, TX430 OS lines showed average TAG concentrations of 15.0 g kg−1 in leaves and 12.8 g kg−1 in stems, approximately 19-fold higher than WT. Ramada OS lines accumulated 26.1 g kg−1 in leaves and 12.3 g kg−1 in stems, approximately 25-fold and 13-fold increases over WT, respectively. OS lines in TX430 exhibited an 18% reduction in biomass (8.4 vs. 9.9 Mg ha−1 for WT), while Ramada OS lines had similar WT biomass (18.3 vs. 19.9 Mg ha−1 for WT). Among TX430 OS lines, TxHO-2 achieved the highest TAG yield (190 kg ha−1), while RmHO-1 led the Ramada lines (335 kg ha−1) due to higher biomass and similar TAG concentration. Enhanced TAG accumulation increased N, P, and K removal in TX430 lines but not in Ramada lines. Structural carbohydrate and ash concentration were unaffected. Overall, results confirm vegetative lipid accumulation as a viable strategy for high-biomass sorghum, supporting its potential as a dual-purpose feedstock for SAF. Future work should focus on minimizing biomass yield penalties and improving nutrient use efficiency in oil sorghum systems.

Agronomy↗
DOE OSTI2021

Genomic mechanisms of climate adaptation in polyploid bioenergy switchgrass

Long-term climate change and periodic environmental extremes threaten food and fuel security and global crop productivity. Although molecular and adaptive breeding strategies can buffer the effects of climatic stress and improve crop resilience, these approaches require sufficient knowledge of the genes that underlie productivity and adaptation—knowledge that has been limited to a small number of well-studied model systems. Here we present the assembly and annotation of the large and complex genome of the polyploid bioenergy crop switchgrass ( Panicum virgatum ). Analysis of biomass and survival among 732 resequenced genotypes, which were grown across 10 common gardens that span 1,800 km of latitude, jointly revealed extensive genomic evidence of climate adaptation. Climate–gene–biomass associations were abundant but varied considerably among deeply diverged gene pools. Furthermore, we found that gene flow accelerated climate adaptation during the postglacial colonization of northern habitats through introgression of alleles from a pre-adapted northern gene pool. The polyploid nature of switchgrass also enhanced adaptive potential through the fractionation of gene function, as there was an increased level of heritable genetic diversity on the nondominant subgenome. In addition to investigating patterns of climate adaptation, the genome resources and gene–trait associations developed here provide breeders with the necessary tools to increase switchgrass yield for the sustainable production of bioenergy.

09 BIOMASS FUELS↗
DOE OSTI2026

Decreases in polyunsaturated fatty acid content improve heat stress tolerance during flowering and silicle development in pennycress (Thlaspi arvense L.)

Introduction: Pennycress (Thlaspi arvense L.) is an emerging intermediate oilseed crop grown in the offseason between primary summer crops to produce three cash crops in two years. Previous efforts to improve seed oil quality produced Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) genome-edited lines with decreased polyunsaturated fatty acids (PUFAs) levels, through loss of function of the FATTY ACID DESATURASE 2 (FAD2), REDUCED OLEATE DESATURATION1 (ROD1), and FATTY ACID ELONGASE1 (FAE1) genes. While seed oil compositions were previously characterized, it remains unknown how vegetative and reproductive tissue compositions might differ and affect tolerance to high temperature (HT) conditions.Methods: In four growth chamber experiments, we explored HT tolerance during flowering and silicle development. Plants were subjected to a 34 °C day/28 °C night regime and compared to control plants maintained at 20 °C. Pollen grain viability at a range of temperatures, lipid peroxidation and proline content in leaves and silicles following HT, and seed yield were measured.Results: Both fad2 and rod1 mutant lines had relatively higher pollen viability (71% and 54% respectively) under moderately elevated temperature (28 °C) compared to wild-type controls (37%). They also showed smaller decreases in seed yield (0% and 40% for fad2 and rod1 respectively, compared to 61% for wild type), following HT exposure during late flowering and early silicle development. Silicles of fad2 plants experienced 65% less lipid peroxidation under HT and 55% less buildup of proline, signifying less stress.Discussion: The differential results of fad2 and rod1 are likely due to the role of FAD2 in membranes in all tissues, whereas ROD1 predominantly affects triacylglycerol (TAG) composition in oil-accumulating tissues including pollen. Our results indicate that decreasing PUFAs, through gene editing, can increase heat tolerance in reproductive tissues as an auxiliary benefit accompanying improved seed oil quality.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Ammonia Fiber Expansion (AFEX) Pretreatment of Lignocellulosic Biomass

Lignocellulosic materials are plant-derived feedstocks, such as crop residues (e.g., corn stover, rice straw, and sugar cane bagasse) and purpose-grown energy crops (e.g., miscanthus, and switchgrass) that are available in large quantities to produce biofuels, biochemicals, and animal feed. Plant polysaccharides (i.e., cellulose, hemicellulose, and pectin) embedded within cell walls are highly recalcitrant towards conversion into useful products. Ammonia fiber expansion (AFEX) is a thermochemical pretreatment that increases accessibility of polysaccharides to enzymes for hydrolysis into fermentable sugars. These released sugars can be converted into fuels and chemicals in a biorefinery. Here, we describe a laboratory-scale batch AFEX process to produce pretreated biomass on the gram-scale without any ammonia recycling. The laboratory-scale process can be used to identify optimal pretreatment conditions (e.g., ammonia loading, water loading, biomass loading, temperature, pressure, residence time, etc.) and generates sufficient quantities of pretreated samples for detailed physicochemical characterization and enzymatic/microbial analysis. The yield of fermentable sugars from enzymatic hydrolysis of corn stover pretreated using the laboratory-scale AFEX process is comparable to pilot-scale AFEX process under similar pretreatment conditions. This paper is intended to provide a detailed standard operating procedure for the safe and consistent operation of laboratory-scale reactors for performing AFEX pretreatment of lignocellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2020

Co-catabolism of arginine and succinate drives symbiotic nitrogen fixation

Biological nitrogen fixation emerging from the symbiosis between bacteria and crop plants holds promise to increase the sustainability of agriculture. One of the biggest hurdles for the engineering of nitrogen-fixing organisms is an incomplete knowledge of metabolic interactions between microbe and plant. In contrast to the previously assumed supply of only succinate, we describe here the CATCH-N cycle as a novel metabolic pathway that co-catabolizes plant provided arginine and succinate to drive the energy-demanding process of symbiotic nitrogen fixation in endosymbiotic rhizobia. Using systems biology, isotope labeling studies and transposon sequencing in conjunction with biochemical characterization, we uncovered highly redundant network components of the CATCH-N cycle including transaminases that interlink the co-catabolism of arginine and succinate. The CATCH-N cycle uses N2 as an additional sink for reductant and therefore delivers up to 25% higher yields of nitrogen than classical arginine catabolism—two alanines and three ammonium ions are secreted for each input of arginine and succinate. We argue that the CATCH-N cycle has evolved as part of a synergistic interaction to sustain bacterial metabolism in the microoxic and highly acid environment of symbiosomes. Thus, the CATCHN cycle entangles the metabolism of both partners to promote symbiosis. Our results provide a theoretical framework and metabolic blueprint for the rational design of plants and plant-associated organisms with new properties to improve nitrogen fixation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Propagation method and planting density influence canopy developmental transition and biomass productivity in Miscanthus × giganteus

Understanding how establishment practices influence the mechanisms underlying Miscanthus × giganteus (miscanthus) productivity and canopy development is critical for optimizing management. Data was collected during the juvenile (2011–2013) and mature (2024) phases of a long-term field experiment established in Urbana, Illinois, to evaluate the effects of propagation method (plug propagation [PP] and rhizome propagation [RP]), planting density (1.0, 0.75, and 0.25 plants m⁻²), and nitrogen application (0 and 67 kg N ha⁻¹) on end-of-season biomass yield, tiller mass, tiller density, and tiller height. Linear regression models identified the dominant predictors of yield across stand ages and management regimes. Planting density, nitrogen (N) application, and propagation method significantly influenced early yield and canopy development. During the juvenile phase, biomass yield was driven by tiller density due to canopy expansion; in the mature phase, yield became driven by tiller mass. The PP plots produced higher tiller density than the RP plots, resulting in faster canopy closure and higher juvenile-phase yields. Rhizome-propagated (RP) plots produced lower tiller density, but individual tillers were 3.3–6.4 g tiller −1 heavier than PP tillers. After the canopy reached equilibrium, the PP and RP yields were similar because greater RP tiller mass compensated for its lower tiller density. Higher planting density resulted in greater yield and tiller density during the second year (2012), but this effect was absent from the third year (2013) onward. In the juvenile phase, N fertilization enhanced yield by 1.6–3.4 Mg ha −1 . Initiating fertilization in 2013 on unfertilized plots produced biomass similar to that in fertilized plots, suggesting yield recovery in the mature phase. These findings revealed that establishment strategies, including propagation method and planting density, influence juvenile miscanthus canopy development and productivity, transitioning from tiller-density- to mass-dominated yields, but not mature phase productivity.

09 BIOMASS FUELS↗
DOE OSTI2024

Harnessing the potential of oilcane waste mud for recovering biobased waxes

Abstract Oilcane is an engineered sugarcane with the ability to hyper‐accumulate vegetative lipids. It is processed to obtain juice and bagasse as a potential substrate for the production of biofuels and biochemicals. The juice comprises solid particles that are separated as waste mud before the fermentation of the juice. In this study, the oilcane waste mud (OWM) generated from 1000 liters of oilcane juice was quantified and evaluated as a potential resource for recovering biobased waxes. Hexane and ethyl acetate were evaluated as two different solvents for extracting waxes from OWM followed by its purification using acetone. The extracted biobased wax samples were characterized for their chemical and thermal profiles which were then compared with commercial natural waxes. Detailed mass balance shows that 53.6 ± 2.6 kg (dry basis) of solid OWM gets generated upon processing 1000 L (~1068 kg) of oilcane juice. Hexane and ethyl acetate led to a crude wax yield of 25.6 ± 0.2% and 16.6 ± 0.4% (wt/wt, dry basis) respectively from OWM at the end of 8 h. The relative purification of the wax samples was reported in the range of 58%–65% (wt/wt). The purified OWM wax has a melting point of 74.7°C. The waste mud was valorized as a source of biobased waxes with characteristic chemical and thermal profiles comparable to commercial natural waxes (carnauba and beeswax). Considering the decline in the supply of petroleum wax in the future coupled with the switch to “greener” alternative products by consumers, OWM could be a valuable source of natural wax in the industrial sector reducing the dependence on petroleum waxes. Eventually, recovering biobased wax as a co‐product from OWM would bring in an additional stream of revenue leading to the development of a zero‐waste biorefinery based on bioenergy crops.

09 BIOMASS FUELS↗
DOE OSTI2024

Data for Harnessing the Potential of Oilcane Waste Mud for Recovering Biobased Waxes

Oilcane is an engineered sugarcane with the ability to hyper-accumulate vegetative lipids. It is processed to obtain juice and bagasse as a potential substrate for the production of biofuels and biochemicals. The juice comprises solid particles that are separated as waste mud before the fermentation of the juice. In this study, the oilcane waste mud (OWM) generated from 1000 liters of oilcane juice was quantified and evaluated as a potential resource for recovering biobased waxes. Hexane and ethyl acetate were evaluated as two different solvents for extracting waxes from OWM followed by its purification using acetone. The extracted biobased wax samples were characterized for their chemical and thermal profiles which were then compared with commercial natural waxes. Detailed mass balance shows that 53.6 ± 2.6 kg (dry basis) of solid OWM gets generated upon processing 1000 L (~1068 kg) of oilcane juice. Hexane and ethyl acetate led to a crude wax yield of 25.6 ± 0.2% and 16.6 ± 0.4% (wt/wt, dry basis) respectively from OWM at the end of 8 h. The relative purification of the wax samples was reported in the range of 58%–65% (wt/wt). The purified OWM wax has a melting point of 74.7°C. The waste mud was valorized as a source of biobased waxes with characteristic chemical and thermal profiles comparable to commercial natural waxes (carnauba and beeswax). Considering the decline in the supply of petroleum wax in the future coupled with the switch to “greener” alternative products by consumers, OWM could be a valuable source of natural wax in the industrial sector reducing the dependence on petroleum waxes. Eventually, recovering biobased wax as a co-product from OWM would bring in an additional stream of revenue leading to the development of a zero-waste biorefinery based on bioenergy crops.

Biomass Analytics↗
DOE OSTI2021

Varied farm-level carbon intensities of corn feedstock help reduce corn ethanol greenhouse gas emissions

Abstract A reduction in the overall carbon intensity (CI) of a crop-based biofuel can be achieved by cutting down the CI of the biofuel’s feedstock, which in turn correlates significantly to agricultural management practices. Proposals are being made to incentivize low-carbon biofuel feedstocks under U.S. fuel regulatory programs to promote sustainable farming practices by individual farms. For such an incentive scheme to function properly, robust data collection and verification are needed at the farm level. This study presents our collaboration with U.S. private sector companies to collect and verify the corn production data necessary for feedstock-specific CI calculation at the farm level, through a carefully designed questionnaire, to demonstrate the practicality and feasibility of data collection at scale. We surveyed 71 farms that produced 0.2 million metric tons of corn grain in 2018 in a Midwestern U.S. state to obtain information on key parameters affecting corn ethanol feedstock CI, such as grain yields, fertilizer/chemical application rates, and agronomic practices. Feedstock-specific CI was calculated in the unit of grams (g) CO 2 equivalent (CO 2 e) of greenhouse gases per kilogram (kg) of corn produced. Results showed large CI variations—from 119 to 407 g CO 2 e kg −1 of corn—due to the farm-level inventory, while the production-weighted average CI for all surveyed farms was 210 g CO 2 e kg −1 , comparable to the national average CI of 204 g CO 2 e kg −1 . The nitrogen fertilizer type applied and rate were identified as key factors contributing most to CI variations at the farm level. The estimated N 2 O emissions from fertilizer and biomass nitrogen inputs to soil accounted for 51% of the overall farm-level CI and therefore need to be better monitored at farm level with high resolution. We concluded that this feedstock-specific, farm-level CI evaluation has the potential to be used to incentivize low-carbon feedstock for biofuel production.

54 ENVIRONMENTAL SCIENCES↗