Search NASA⌕ Search

SEARCH · Search NASA

Results for “DISPLACEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Dissolution kinetics of small amounts of oxygen in tantalum alloy T-111 and internal oxide displacement reactions during annealing

Oxygen was added to T-111 (Ta-8W-2Hf, wt. %) at 820 and 990 C at an oxygen pressure of about 0.0003 torr. The technique employed permitted predetermined and reproducible doping of T-111 up to 3.0 at. % oxygen. Based on the temperature dependence of the doping reaction, it is concluded that the initial rates of oxygen pickup are probably controlled by solution of oxygen into the T-111 lattice. Although hafnium oxides are more stable than those of tantalum or tungsten, analyses of extracted residues indicate that the latter oxides predominate in the as-doped specimens, presumably because of the higher concentrations of tantalum and tungsten in the alloy. However, high-temperature annealing promotes gettering of dissolved oxygen and of other oxides to form hafnium oxides. Small amounts of tantalum and tungsten oxides were still present after high-temperature annealing. Tungsten oxide (WO3) volatilizes slightly from the surface of T-111 at 990 C. The vaporization of WO3 has no apparent affect on the doping reaction.

Stecura, S.↗
NASA NTRS1977

Stress computation in displacement methods for two-material elastic media

The method of best fit strain tensors is extended to compute the stresses satisfying the conditions of equilibrium, compatibility, and constitutive relationships. It is assumed that the deflections at the mesh points have already been computed with acceptable accuracy. Results of examples presented show better accuracy than the usual procedure, in which equilibrium conditions are not enforced. Special emphasis is placed here upon two-material elastic media.

Salama, M.↗
NASA NTRS1980

Evacuated-displacement compression molding

Compression-molding process conprises: loading molding compound; evacuation; applying pressure to shape softened compound; further compressing while using compound as hydraulic fluid; and applying heat and pressure for cure. Major advantage of method is that it prevents increase in cavity volume (sporadic or general) throughout transformation phase of molding.

Heir, W. C.↗
NASA NTRS1979

Relaxation to photochemical equilibrium of charged species within displaced air parcels in the D-region

The effects of the relaxation to photochemical equilibrium are investigated for the electrons and NO(+) ions in the upper D-region and for the electrons and several species of positive and negative ions present in the lower D-region. In the upper D-region the photochemical model includes electrons, nitric oxide, and NO(+). A self-consisting model of the equilibrium concentrations is developed for the lower D-region, which includes electrons, nitric oxide, O2(-), heavy negative and positive ions, and the oxygen species O, O3, and O2(1 delta g). At altitudes of 75 and 80 km the time dependence of the oxygen species has a significant effect on the equilibration of the electron and O2(-) concentrations. The relaxation to photochemical equilibrium proceeds by five e-folding time scales in the lower D-region, where the time required for final equilibration due to recombination is very long.

Hill, R. J.↗
NASA NTRS1978

The displacement field associated with line forces in a cracked orthotropic body

An explicit result is presented for the two-dimensional Green function for an orthotropic body containing a crack along an orthotropic plane and with its tip in an orthotropic direction. A formal solution and a numerical program for its calculation are presented for a crack on a plane rotated about an orthotropic direction. The use of such Green functions to couple a finite element mesh to a surrounding elastic continuum, thereby shortening finite element calculations for composite bodies with macroscopic orthotropic symmetry, is discussed.

Gehlen, P. C.↗
NASA NTRS1980

Modified displacement gage for cryogenic testing

Modification of double-cantilever-beam resistance strain gage makes boiling of hydrogen on gage arms less of problem. Modified gages are encapsulated nickel/chromium alloy, and bridge-excitation voltage is reduced from 10 to 1.5 volts. Sensitivity is 1.0 millivolt per inch with 1.5 volt excitation.

Pierce, W. S.↗
NASA NTRS1980

An overview of NASA research on positive displacement general-aviation engines

The research and technology program related to improved and advanced general aviation engines is described. Current research is directed at the near-term improvement of conventional air-cooled spark-ignition piston engines and at future alternative engine systems based on all-new spark-ignition piston engines, lightweight diesels, and rotary combustion engines that show potential for meeting program goals in the midterm and long-term future. The conventional piston engine activities involve efforts on applying existing technology to improve fuel economy, investigation of key processes to permit leaner operation and reduce drag, and the development of cost effective technology to permit flight at high-altitudes where fuel economy and safety are improved. The advanced engine concepts activities include engine conceptual design studies and enabling technology efforts on the critical or key technology items.

Kempke, E. E., Jr.↗
NASA NTRS1980

Investigation of tidal displacements of the Earth's surface by laser ranging to GEOS-3

An analysis of laser ranging data from three stations was carried out in an attempt to measure the geometric Earth tide. Two different approaches to the problem were investigated. The dynamic method computes pass to pass apparent movements in stations height relative to short arcs fitted to several passes of data from the same station by the program GEODYNE. The quasi-geometric method reduces the dependence on unmodelled satellite dynamics to a knowledge of only the radial position of the satellite by considering two station simultaneous ranging at the precise time that the satellite passes through the plane defined by two stations and the center of mass of the Earth.

Bower, D. R.↗
NASA NTRS1980

Displacement of plasma protein and conduction velocity in rats under action of acceleration forces and hypokinesia

The permeability of capillary vessels was investigated in order to determine if acceleration alone or following prolonged hypokinesia would induce changes in the vascular wall leading to the penetration by l-albumins and/or proteins with larger molecules. In rats undergoing action of +5 Gz accelerations, no increase in vascular permeability, as tested with the use of (Cr-5k)-globulin, was demostrated. In rats immobilized for 4 weeks before centrifugation, rather weak migration of (Cr-51)-globulin from the vessels was observed. Immobilization resulted also in lowering of conduction velocity in the sciatic nerve.

Baranski, S.↗
NASA NTRS1982

Measurements of displacement around holes in composite plates subjected to quasi-static compression

Attempts to develop a whole-field, high sensitivity optical technque for measurement of load induced changes of thickness of composite plates are described. Graphite-epoxy plates of quasi-isotropic layup were used as test specimens. Changes of thickness of three plates, each with a central hole of different size, were measured as a function of applied compressive loads. The first test specimen showed localized zones where no holographic fringes were present, surrounded by zones of low fringe contrast. This was thought to be a result of localized motion or creep. Subsequent tests with an increased time interval between specimen loading and holographic exposure demonstrated no localized zones of absent fringes. No plausible explanation for radical differences in the quality of fringe patterns was found, although the use of specimens having a high quality mirrorized surface provided superior change of thickness patterns. Recommendations for further investigations and changes in test procedure are presented.

Duke, J. C., Jr.↗
NASA NTRS1982

Evaluation of an electro-optic remote displacement measuring system

An instrumentation system to provide a noncontact method for measurement of target positions was evaluated. The system employs two electro-optic camera units which give stereo information for use in determining three dimensional target locations. Specially developed, infrared sensitive photodetectors are used in the cameras to sense radiation from light emitting diode targets. Up to 30 of these targets can be monitored with a sampling rate of 312 Hz per target. An important part of the system is a minicomputer which is used to collect the camera data, sort it, make corrections for distortions in the electro-optic system, and perform the necesssary coordinate transformations. If target motions are restricted to locations in a plane which is perpendicular to a camera's optical axis, the system can be used with just one camera. Calibrations performed in this mode characterize accuracies in single camera operation. This information is also useful in determination of single camera contributions to total system errors. For this reason the system was tested in both the single camera and two camera (stereo) modes of operation.

Monteith, J. H.↗
NASA NTRS1980

Lunar highland crustal models based on iron concentrations - Isostasy and center-of-mass displacement

Data is introduced on the iron concentrations of the lunar surface which have been refined by means of convolution corrections to restore the spatial resolution and contrast lost by the omnidirectional spectrometer. This refined iron data is synthesized with other orbital seismic, and lunar sample data to derive highland crustal density and thickness, and isostasy and lunar centers of mass models are examined in light of this new information. A model is developed by which highland crustal density is calculated for each highland region from orbital observations of Fe, Mg and Ti concentrations. The results of this model are presented numerically and graphically for 35 highland and two non-highland regions. Density and thickness results are then applied to two long-standing lunar problems: (1) the nature of highland isostasy, which is shown to be controlled by crustal thickness rather than density, and (2) the separation of the moon's mass and figure centers, which is shown to be due to the crustal thickness difference between the lunar near and far sides.

Haines, E. L.↗