Search NASA⌕ Search

SEARCH · Search NASA

Results for “Data Platform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Stochastic Guidance of Buoyancy Controlled Vehicles under Ice Shelves using Ocean Currents

We propose a novel technique for guidance ofbuoyancy-controlled vehicles in uncertain under-ice ocean flows.In-situ melt rate measurements collected at the grounding zoneof Antarctic ice shelves, where the ice shelf meets the underlyingbedrock, are essential to constrain models of future sea levelrise. Buoyancy-controlled vehicles, which control their verticalposition in the water column but have no means of horizontalpropulsion, offer an affordable and reliable platform for suchin-situ data collection. However, reaching the grounding zonerequires vehicles to traverse tens of kilometers under the iceshelf, with approximate position knowledge and no meansof communication, in highly variable and uncertain oceancurrents. To address this challenge, we propose a partiallyobservable MDP approach that exploits model-based knowledgeof the under-ice currents and, critically, of their uncertainty,to synthesize effective guidance policies. The approach usesapproximate dynamic programming to model uncertainty inthe currents, and QMDP to address localization uncertainty.Numerical experiments show that the policy can deliver upto 88.8% of underwater vehicles to the grounding zone – a33% improvement compared to state-of-the-art guidance techniques, and a 262% improvement over uncontrolled drifters.Collectively, these results show that model-based under-iceguidance is a highly promising technique for exploration ofunder-ice cavities, and has the potential to enable cost-effectiveand scalable access to these challenging and rarely observed environments.

Clark, Evan B.↗

Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ)

The NOAA/NASA Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) experiment was a multi-agency, inter-disciplinary research effort to: (a) obtain detailed measurements of trace gas and aerosol emissions from wildfires and prescribed fires using aircraft, satellites and ground-based instruments, (b) make extensive suborbital remote sensing measurements of fire dynamics, (c) assess local, regional, and global modeling of fires, and (d) strengthen connections to observables on the ground such as fuels and fuel consumption and satellite products such as burned area and fire radiative power. From Boise, ID western wildfires were studied with the NASA DC-8 and two NOAA Twin Otter aircraft. The high-altitude NASA ER-2 was deployed from Palmdale, CA to observe some of these fires in conjunction with satellite overpasses and the other aircraft. Further research was conducted on three mobile laboratories and ground sites, and 17 different modeling forecast and analyses products for fire, fuels and air quality and climate implications. From Salina, KS the DC-8 investigated 87 smaller fires in the Southeast with remote and in-situ data collection. Sampling by all platforms was designed to measure emissions of trace gases and aerosols with multiple transects to capture the chemical transformation of these emissions and perform remote sensing observations of fire and smoke plumes under day and night conditions. The emissions were linked to fuels consumed and fire radiative power using orbital and suborbital remote sensing observations collected during overflights of the fires and smoke plumes and ground sampling of fuels.

Carsten Warneke↗

An Analysis of the Laboratory and Environmental Impacts of Space Weathering on Novel Materials in the Low Earth Orbit (LEO)

The Materials International Space Station Experiment (MISSE) project is a National Aeronautics and Space Administration (NASA) initiative that was launched in 2001 with the aim of studying the effects of the low Earth orbit (LEO) space environment on a variety of materials. Since its inception, the MISSE project has tested approximately 4,000 different material samples and specimens, evaluating their durability and performance in the harsh and challenging conditions of space. This paper provides an overview of the 16th MISSE project performed by the versatile team of researchers led by the Georgia Tech Research Institute (GTRI) from 08/31/22 to 02/23/23. Details of the orbital environment during the mission, MISSE platform hardware upgrade, and space data acquisition process are discussed.

Elena A Plis↗

The Utility and Validity of Kinematic GPS Positioning for the Geosar Airborne Terrain Mapping Radar System

GeoSAR is an airborne, interferometric Synthetic Aperture Radar (IFSAR) system for terrain mapping, currently under development by a consortium including NASA's Jet Propulsion Laboratory (JPL), Calgis, Inc., a California mapping sciences company, and the California Department of Conservation (CaIDOC), with funding provided by the U.S. Army Corps of Engineers Topographic Engineering Center (TEC) and the U.S. Defense Advanced Research Projects Agency (DARPA). IFSAR data processing requires high-accuracy platform position and attitude knowledge. On 9 GeoSAR, these are provided by one or two Honeywell Embedded GPS Inertial Navigation Units (EGI) and an Ashtech Z12 GPS receiver. The EGIs provide real-time high-accuracy attitude and moderate-accuracy position data, while the Ashtech data, post-processed differentially with data from a nearby ground station using Ashtech PNAV software, provide high-accuracy differential GPS positions. These data are optimally combined using a Kalman filter within the GeoSAR motion measurement software, and the resultant position and orientation information are used to process the dual frequency (X-band and P-band) radar data to generate high-accuracy, high -resolution terrain imagery and digital elevation models (DEMs). GeoSAR requirements specify sub-meter level planimetric and vertical accuracies for the resultant DEMS. To achieve this, platform positioning errors well below one meter are needed. The goal of GeoSAR is to obtain 25 cm or better 3-D positions from the GPS systems on board the aircraft. By imaging a set of known point target corner-cube reflectors, the GeoSAR system can be calibrated. This calibration process yields the true position of the aircraft with an uncertainty of 20- 50 cm. This process thus allows an independent assessment of the accuracy of our GPS-based positioning systems. We will present an overview of the GeoSAR motion measurement system, focusing on the use of GPS and the blending of position data from the various systems. We will present the results of our calibration studies that relate to the accuracy the GPS positioning. We will discuss the effects these positioning, errors have on the resultant DEM products and imagery.

Freedman, Adam↗

Determination of spacecraft attitude using synthetic aperture radar data

A method has been developed for precise sensor platform attitude determination which exploits the availability of synthetic aperture radar (SAR) sensors on future planned NASA earth orbiting spacecraft. Using the ephemeris along with data on planet shape and rotation, the relative motion between sensor and target area and therefore the Doppler frequency shift in the returned echo data is determined. Equations have been developed that relate the Doppler shift to the antenna attitude. The method is tested by comparing attitude predictions from SEASAT SAR digital echo data with available conventionally determined SEASAT attitude information.

Wu, C.↗

Parallel Grid Manipulations in Earth Science Calculations

The National Aeronautics and Space Administration (NASA) Data Assimilation Office (DAO) at the Goddard Space Flight Center is moving its data assimilation system to massively parallel computing platforms. This parallel implementation of GEOS DAS will be used in the DAO's normal activities, which include reanalysis of data, and operational support for flight missions. Key components of GEOS DAS, including the gridpoint-based general circulation model and a data analysis system, are currently being parallelized. The parallelization of GEOS DAS is also one of the HPCC Grand Challenge Projects. The GEOS-DAS software employs several distinct grids. Some examples are: an observation grid- an unstructured grid of points at which observed or measured physical quantities from instruments or satellites are associated- a highly-structured latitude-longitude grid of points spanning the earth at given latitude-longitude coordinates at which prognostic quantities are determined, and a computational lat-lon grid in which the pole has been moved to a different location to avoid computational instabilities. Each of these grids has a different structure and number of constituent points. In spite of that, there are numerous interactions between the grids, e.g., values on one grid must be interpolated to another, or, in other cases, grids need to be redistributed on the underlying parallel platform. The DAO has designed a parallel integrated library for grid manipulations (PILGRIM) to support the needed grid interactions with maximum efficiency. It offers a flexible interface to generate new grids, define transformations between grids and apply them. Basic communication is currently MPI, however the interfaces defined here could conceivably be implemented with other message-passing libraries, e.g., Cray SHMEM, or with shared-memory constructs. The library is written in Fortran 90. First performance results indicate that even difficult problems, such as above-mentioned pole rotation- a sparse interpolation with little data locality between the physical lat-lon grid and a pole rotated computational grid- can be solved efficiently and at the GFlop/s rates needed to solve tomorrow's high resolution earth science models. In the subsequent presentation we will discuss the design and implementation of PILGRIM as well as a number of the problems it is required to solve. Some conclusions will be drawn about the potential performance of the overall earth science models on the supercomputer platforms foreseen for these problems.

Sawyer, W.↗

GL4U: Training the next generation of bioinformaticians, one omics datatype at a time

Spaceflight modifies gene expression in every organism examined to date, including humans. Understanding how these gene expression changes affect physiology is crucial for the development of countermeasures to enable long-duration manned missions. NASA’s GeneLab project provides researchers open access to multi-omics data, including genetic and gene expression data, from spaceflight experiments that can be mined to understand the effects of spaceflight on biological systems. To ensure new knowledge generation through data re-use, it is important to maximize the number of scientists who utilize GeneLab data. Training students on the GeneLab platform is the best way to create long-term adopters of this NASA database and its tools. Turning students into future instructors and advocates will also accelerate the dissemination of these data and tools to the broader scientific community. Therefore, in collaboration with the GeneLab Educational Working Group (EWG), GeneLab has created GeneLab for Colleges and Universities (GL4U). GL4U provides space biology-relevant training in bioinformatics to the next generation of scientists through direct and indirect approaches. The GeneLab team plans to host two annual data processing bootcamps, one for college-level students (direct) and one for college educators (indirect – training of trainers), in which participants learn to analyze GeneLab’s space-relevant omics data. During the bootcamp, educators will receive materials and training to enable them to run the bootcamp at their home institutions or alternatively to adapt the content to implement within existing courses, thereby extending the reach of this initiative. The GL4U direct training pilot program was conducted in June 2021 in collaboration with USRA and San Jose State University (SJSU). During the pilot, SJSU students participated in a week-long bootcamp consisting of space biology-specific lectures and hands-on instruction using Jupyter Notebooks to analyze RNA sequence data. This pilot demonstrates the capacity of GL4U for training young scientists and encouraging data re-use.

Jonathan Matthew Galazka↗

GPS as an orbit determination subsystems

This paper evaluates the use of Global Positioning System (GPS) receivers as a primary source of tracking data for low-Earth orbit satellites. GPS data is an alternative to using range, azimuth, elevation, and range-rate (RAER) data from the Air Force Satellite Control Network antennas, the Space Ground Link System (SGLS). This evaluation is applicable to missions such as Skipper, a joint U.S. and Russian atmosphere research mission, that will rely on a GPS receiver as a primary tracking data source. The Detachment 2, Space and Missile Systems Center's Test Support Complex (TSC) conducted the evaluation based on receiver data from the Space Test Experiment Platform Mission O (STEP-O) and Advanced Photovoltaic and Electronics Experiments (APEX) satellites. The TSC performed orbit reconstruction and prediction on the STEP-0 and APEX vehicles using GPS receiver navigation solution data, SGLS RAER data, and SGLS anglesonly (azimuth and elevation) data. For the STEP-O case, the navigation solution based orbits proved to be more accurate than SGLS RAER based orbits. For the APEX case, navigation solution based orbits proved to be less accurate than SGLS RAER based orbits for orbit prediction, and results for orbit reconstruction were inconclusive due to the lack of a precise truth orbit. After evaluating several different GPS data processing methods, the TSC concluded that using GPS navigation solution data is a viable alternative to using SGLS RAER data.

Fennessey, Richard↗

Future data processing and its effect on spaceborne sensors

Remotely sensed data are attaining a new stature. New model for their use are being developed. Data delays are being overcome, and consideration is being given to multiple satellites and platforms providing shorter-interval repeat coverage. Statewide data systems are being developed to take advantage of remotely sensed data as a new analysis tool.

Billingsley, F. C.↗

Registration and Fusion of Multiple Source Remotely Sensed Image Data

Earth and Space Science often involve the comparison, fusion, and integration of multiple types of remotely sensed data at various temporal, radiometric, and spatial resolutions. Results of this integration may be utilized for global change analysis, global coverage of an area at multiple resolutions, map updating or validation of new instruments, as well as integration of data provided by multiple instruments carried on multiple platforms, e.g. in spacecraft constellations or fleets of planetary rovers. Our focus is on developing methods to perform fast, accurate and automatic image registration and fusion. General methods for automatic image registration are being reviewed and evaluated. Various choices for feature extraction, feature matching and similarity measurements are being compared, including wavelet-based algorithms, mutual information and statistically robust techniques. Our work also involves studies related to image fusion and investigates dimension reduction and co-kriging for application-dependent fusion. All methods are being tested using several multi-sensor datasets, acquired at EOS Core Sites, and including multiple sensors such as IKONOS, Landsat-7/ETM+, EO1/ALI and Hyperion, MODIS, and SeaWIFS instruments. Issues related to the coregistration of data from the same platform (i.e., AIRS and MODIS from Aqua) or from several platforms of the A-train (i.e., MLS, HIRDLS, OMI from Aura with AIRS and MODIS from Terra and Aqua) will also be considered.

LeMoigne, Jacqueline↗

Kinematics and Kinetics of Squat and Deadlift Exercises with Varying Stance Widths

The primary motion of squat and deadlift exercise involves flexion and extension of the hips, knees, and ankles, but each exercise can be performed with variations in stance width. These variations may result in differing kinematics and ground reaction forces (GRF), which may in turn affect joint loading. PURPOSE: The purpose of this investigation was to compare ankle, knee, and hip kinematics and kinetics of normal squat (NS), wide-stance squat (WS), normal deadlift (ND), and sumo deadlift (SD). We hypothesized that hip joint kinematics and work at each joint would differ between exercise variations. METHODS: Six subjects (3 m/3 f; 70.0 plus or minus 13.7 kg; 168 plus or minus 9.9 cm) performed each lift in normal gravity on the ground-based version of the Advanced Resistive Exercise Device (ARED) used on the International Space Station. The ARED provided resistance with a combination vacuum tube/flywheel mechanism designed to replicate the gravitational and inertial forces of free weights. Subjects completed each lift with their 10-repetition maximum load. Kinematic data were collected at 250 Hz by a 12-camera motion-capture system (Smart-D, BTS Bioengineering, Milan, Italy), and GRF data were collected at 1000 Hz with independent force platforms for each leg (Model 9261, Kistler Instruments AG, Winterhur, Switzerland). All data were captured simultaneously on a single workstation. The right leg of a single lift for each motion was analyzed. Modeling software (OpenSim 2.2.0, Simbios, Palo Alto, CA) determined joint kinematics and net positive and negative work at each lower extremity joint. Total work was found as the sum of work across all joints and was normalized by system mass. Effect sizes and their 95% confidence intervals were computed between conditions. RESULTS: Peak GRF were similar for each lift. There were no differences between conditions in hip flexion range of motion (ROM). For hip adduction ROM, there were no differences between the NS, WS, and SD. However, hip adduction ROM was greater during the NS and SD than during the ND. Hip rotation ROM was greater during the WS than during the NS and SD, and was greater during the SD than during the ND. For knee and ankle flexion ROM, the ND, WS, and SD were not different, but ROM was greater during the NS than the ND and greater during the WS than the SD. Total eccentric work was greater during the WS than the SD. Otherwise, there were no differences in eccentric or concentric work between conditions. CONCLUSIONS: Although squat and deadlift exercises consist of similar motions, there are kinematic differences between them that depend on stance width. Total eccentric and concentric work are similar for different lifts, but differing kinematics may require activation of different musculature for each variation. With respect to each condition, in the ND the ROM of each joint tended to be less, and the WS tended to trade knee motion for hip motion. PRACTICAL APPLICATIONS: Knowledge of differences in kinematics and kinetics between different squat and deadlift variations is important for coaches and rehabilitation personnel to understand when prescribing exercise. Our results suggest that each variation of the squat and deadlift should be considered a separate exercise that may induce different long-term training effects.

DeWitt, John K.↗

RadLab: A Comprehensive Database and Graphical and Programming Interfaces for Space Radiation Data

RadLab, a component of the NASA Open Science Data Repository (OSDR), is a database of radiation measurements from multiple instruments and spacecraft that provides visual and programmatic interfaces for interrogation and retrieval of these data. The attributes of data available through RadLab include spacecraft, types of radiation sensing instruments, locations within the spacecraft (e.g. ISS modules), associated celestial bodies, trajectories, and spacecraft coordinates; the primary type of data is the absorbed dose rate, as well as flux and dose equivalent rate where available. The application programming interface (API) implements a request syntax for retrieval of timestamped data filtered by various combinations of such attributes; the graphical user interface (GUI) extends this functionality with visualizations (time series plots, comparison plots, geospatial visualizations) which provide easy means to assess data availability, iteratively refine search parameters, interactively inspect the data, and export target data subsets. Datasets are continuously being added to the RadLab database as part of the rolling release process. Investigators from multiple countries, including the US, Canada, Germany, Bulgaria, Hungary, Italy, Japan, Russia and the Czech Republic, have committed to provide data from their instruments in and beyond low Earth orbit. The current release contains datasets provided by US and international collaborators and includes readings from multiple modules of the ISS, the BioSentinel CubeSat, Chang’e 4, the Lunar Reconnaissance Orbiter, the ExoMars Orbiter, and the Curiosity rover. Datasets are associated with respective RadLab knowledgebase articles which include instrument descriptions and provide bibliographical references. RadLab aims to provide a comprehensive, dynamic compendium of space radiation data, enabling the scientific community to perform analyses of data from multiple detectors and to determine the radiation environment of research missions and experiments. Some of its applications include inference of absorbed radiation dose for NASA GeneLab payloads, and training predictive models as part of the 2024 FDL-X challenge. The platform is actively expanding and seeking additional data, with plans to also cover past (e.g. Shuttle, Mir) and future (e.g. Artemis) missions. The RadLab Working Group has been created to aid in this process as well as to foster collaborations among data contributors and users, to develop standards for data harmonization, and to guide the development of the platform, with the goal to establish the use of RadLab in space radiation research and to advance our understanding of the radiation environment in outer space.

Kirill Grigorev↗

RadLab: A Comprehensive Database and Graphical and Programming Interfaces for Space Radiation Data

RadLab, a component of the NASA Open Science Data Repository (OSDR), is a database of radiation measurements from multiple instruments and spacecraft that provides visual and programmatic interfaces for interrogation and retrieval of these data. The attributes of data available through RadLab include spacecraft, types of radiation sensing instruments, locations within the spacecraft (e.g. ISS modules), associated celestial bodies, trajectories, and spacecraft coordinates; the primary type of data is the absorbed dose rate, as well as flux and dose equivalent rate where available. The application programming interface (API) implements a request syntax for retrieval of timestamped data filtered by various combinations of such attributes; the graphical user interface (GUI) extends this functionality with visualizations (time series plots, comparison plots, geospatial visualizations) which provide easy means to assess data availability, iteratively refine search parameters, interactively inspect the data, and export target data subsets. Datasets are continuously being added to the RadLab database as part of the rolling release process. Investigators from multiple countries, including the US, Canada, Germany, Bulgaria, Hungary, Italy, Japan, Russia and the Czech Republic, have committed to provide data from their instruments in and beyond low Earth orbit. The current release contains datasets provided by US and international collaborators and includes readings from multiple modules of the ISS, the BioSentinel CubeSat, Chang’e 4, the Lunar Reconnaissance Orbiter, the ExoMars Orbiter, and the Curiosity rover. Datasets are associated with respective RadLab knowledgebase articles which include instrument descriptions and provide bibliographical references. RadLab aims to provide a comprehensive, dynamic compendium of space radiation data, enabling the scientific community to perform analyses of data from multiple detectors and to determine the radiation environment of research missions and experiments. Some of its applications include inference of absorbed radiation dose for NASA GeneLab payloads, and training predictive models as part of the 2024 FDL-X challenge. The platform is actively expanding and seeking additional data, with plans to also cover past (e.g. Shuttle, Mir) and future (e.g. Artemis) missions. The RadLab Working Group has been created to aid in this process as well as to foster collaborations among data contributors and users, to develop standards for data harmonization, and to guide the development of the platform, with the goal to establish the use of RadLab in space radiation research and to advance our understanding of the radiation environment in outer space.

Kirill Grigorev↗

Forest and grassland ecosystem studies using the advanced solid-state array spectroradiometer

The advanced solid-state array spectroradiometer (ASAS) is an airborne, off-nadir pointing imaging spectroradiometer used to acquire bidirectional radiance data for terrestrial targets. As its platform aircraft flies over a target the sensor can image the target through a sequence of at least seven fore-to-aft view directions ranging up to 45 deg on either side of nadir. ASAS acquires data for 29 spectral bands in the visible and near-infrared portions of the spectrum with a resolution of 15 nm. ASAS data were recently acquired for a prairie ecosystem and a northern forest ecosystem. The data demonstrate the combined effects of reflectance anisotropy and increased atmospheric path length on off-nadir observations. One result of these effects is a variation in vegetation indices as a function of view direction. Normalized-difference-vegetation-indices for prairie grass, coniferous, and deciduous canopies varied up to 14 percent, 23 percent, and 6 percent, respectively, relative to nadir as a function of view zenith angle along the solar principal plane.

Irons, James R.↗

Turning Limitations into Opportunities in the Development of the Orion Medical System: Incorporation of mHealth Devices

INTRODUCTION: Selection of medical devices for the Orion medical system is a complex task which is dependent on the current state of terrestrial technology. In this work we review the interplay between NASA requirements, constraints, and opportunities for synergy during the development of the Orion medical system. METHODS: The “plan to treat” list of conditions, and subsequently the medical resource list for the Orion Artemis II lunar flyby mission was completed using semi-quantitative methods. During this process, some medical resources were excluded to comply with mass and volume limits, while other resources applicable to multiple medical requirements were prioritized for inclusion. Choices were also examined considering NASA level of care standards for the Artemis design reference missions. As a means to optimize capabilities in spite of mass and volume constraints, ideas for integration of multiple devices into a single platform were explored, including a ‘hackathon’ challenge which was conducted to generate and evaluate concepts for combining medical devices into a single app-based mobile device (ultrasound, ECG, etc.). RESULTS: The Orion team identified 128 medical conditions that we “plan to treat”, with 139 unique medical resources to address these conditions, including 5 digital diagnostic devices (ECG, otoscope, stethoscope, pulse oximeter, and blood pressure monitor). During selection of these digital devices the team noted that miniaturized medical devices often use mobile device platforms (mHealth), some displaying and transmitting data exclusively via mobile device. Of the 5 initially selected devices, all are capable of mobile connection, one which cannot function without a mobile device (ECG). Furthermore, only one of these devices connects natively to a Windows platform, which is currently the only operating system available on Orion. DISCUSSION: Significant savings in mass and volume as well as training and usability improvements can be achieved by leveraging mHealth technologies. However, the platform presents significant challenges for deployment within the Artemis Program including lack of internet connectivity, incompatible operating systems, and radiation concerns. Each of these drawbacks are surmountable with investment in the supporting vehicle architecture, which may become necessary to support the technology trends seen in commercially available medical devices today. Objective: Learn about the opportunities and challenges of leveraging mHealth devices in the development of medical capabilities for austere environments. Learn about the constraints of the NASA spaceflight environment with regards to digital medical device integration.

Douglas Ebert↗

The Earth Observing System (EOS) synthetic aperture radar (SAR)

The evolution of the Spaceborne Imaging Radar (SIR) has led to a multipolarization, multifrequency SAR with variable imaging geometry which will be ready for flight on the Space Station Earth Observing System (EOS). Nominally, this SAR will be a three-frequency (L-, C-, and X-band) system with quad polarization available for the L and C bands. It will be capable of acquiring multiincidence-angle data using electronic beam steering, and other imaging geometries by mechanically pitching, yawing, and rolling the antenna. The capabilities of the EOS SAR, particularly acquisition of cross-polarized and high-incidence-angle data, depend on the altitude of the platform on which the SAR flies and improve significantly at lower altitudes. The EOS SAR will provide a unique new data set and will play a key role in understanding the earth's global processes, alone and synergistically with other EOS instruments.

Cimino, Jobea↗

SAGE III/ISS Rapid Data Analysis Through Dashboarding with Jupyter Notebooks

Spaceborne remote sensing observations of Earth’s atmosphere produce significant quantities of data over the life of each mission. In the case of the Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) nearly four years of vertical profiles of atmospheric ozone, water vapor, and nitrogen dioxide concentrations as well as aerosol extinction coefficients have been released. The dichotomy of the desire for both long-term trends in the atmospheric state alongside the assessment of short-term impacts of major disruptive events such as volcanic eruptions and pyrocumulus injections requires agile tools to handle these cases in near real-time as new data are produced. The analysis landscape is further complicated by the desire to compare results between the numerous contemporary observations available for a given dataset. The SAGE III/ISS team has developed a suite of tools leveraging modern web-based frameworks allowing members to interact with a dashboard-style interface to load the data record, assess new profiles as they are generated and in ensemble, compare between species, and additionally add in measurements observed by other platforms as necessary. Leveraging a commonly packaged data format of NetCDF alongside the Python Jupyter Notebook framework, the data can be served to interested parties from an analysis server while still runnable on personal systems if required. This presentation illustrates the ecosystem developed by the SAGE III/ISS team, the applicability to measurements made by any limb-observing platform, and the benefit to transforming routine analyses into readily accessible dynamic plots. Frameworks currently exist at larger scales with projects such as GIOVANNI, and this illustration seeks to show that similar frameworks are accessible and possible within the local research environment while simultaneously unloading human processing cycles for more specialized analysis tasks.

Dashboarding↗

The influence of platform attitude dynamics on the Doppler frequency synthesis of SIR-B ocean data near Hurricane Josephine

The Space Shuttle Challenger was maneuvered into an SAR data-acquisition mode to capture a SIR-B scene of Hurricane Josephine, which presented itself as an unscheduled target of opportunity during NASA Mission 41-G during October 1984. Steeply sloped seas approaching 10 m in height were observed several hundred km in advance of the hurricane track. Mission attitude data indicate that the Shuttle pitch, roll, and yaw were unstable during the data take. The statistical clutterlock used by the ground SAR processor yields a Doppler frequency estimate that tracks the Shuttle yaw variation but is ambiguous with a single discontinuity equal to one multiple of the radar pulse repetition frequency. The SIR-B signal data have been compressed under several Doppler parameterizations to investigate the ambiguity of the clutterlock. Resultant ocean images are analyzed for their contrast and resolution properties.

Tilley, David G.↗