Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Low defect-mediated reverse-bias leakage in (0001) GaN via high-temperature molecular beam epitaxy

Conductive atomic force microscopy, scanning electron microscopy, and x-ray diffraction were used to determine the effects of Ga/N flux ratio on the conductivity of current leakage paths in GaN grown by molecular beam epitaxy. Our data reveal a band of fluxes near Ga/Napprox =1 for which these pathways ceased to be observable. We conclude that changes in surface defects surrounding or impurities along screw-component threading dislocations are responsible for their conductive nature. These observations suggest a method for controlling the primary source of reverse-bias Schottky contact leakage in n-type GaN grown by molecular beam epitaxy.

36 MATERIALS SCIENCE↗

Phase-field modeling of dislocation–interstitial interactions

The mechanical behavior of body-centered cubic (BCC) materials can be dramatically affected by the presence of interstitial solute atoms. Here we present a new phase-field dislocation dynamics formulation to include the diffusion of interstitials. Short-range interactions are accounted for by a concentration-dependent lattice energy, and long-range interactions are accounted for by modifications to the elastic energy. The interstitial diffusion law introduces gradients that require methods for minimizing Gibbs oscillations, which is done via a modified Green’s function. The formulation is general to any solute-solvent system and is applied here to Nb-O as a model system, whose interstitial parameters are obtained from ab initio calculations. The effect of O on the core structures of Nb edge and screw dislocations is calculated. The diffusion of O to form interstitial atmospheres around dislocation cores is simulated, as well as the critical stresses required for dislocations to break away or cross slip from these atmospheres. Future applications of the method to simulate complex interstitial embrittlement mechanisms are discussed.

36 MATERIALS SCIENCE↗

Microstructure-lattice thermal conductivity correlation in nanostructured PbTe{sub 0.7}S{sub 0.3} thermoelectric materials.

The reduction of thermal conductivity, and a comprehensive understanding of the microstructural constituents that cause this reduction, represent some of the important challenges for the further development of thermoelectric materials with improved figure of merit. Model PbTe-based thermoelectric materials that exhibit very low lattice thermal conductivity have been chosen for this microstructure-thermal conductivity correlation study. The nominal PbTe{sub 0.7}S{sub 0.3} composition spinodally decomposes into two phases: PbTe and PbS. Orderly misfit dislocations, incomplete relaxed strain, and structure-modulated contrast rather than composition-modulated contrast are observed at the boundaries between the two phases. Furthermore, the samples also contain regularly shaped nanometer-scale precipitates. The theoretical calculations of the lattice thermal conductivity of the PbTe{sub 0.7}S{sub 0.3} material, based on transmission electron microscopy observations, closely aligns with experimental measurements of the thermal conductivity of a very low value, {approx}0.8 W m{sup -1} K{sup -1} at room temperature, approximately 35% and 30% of the value of the lattice thermal conductivity of either PbTe and PbS, respectively. It is shown that phase boundaries, interfacial dislocations, and nanometer-scale precipitates play an important role in enhancing phonon scattering and, therefore, in reducing the lattice thermal conductivity.

36 MATERIALS SCIENCE↗

Molecular Statics Analyses of Thermodynamics and Kinetics of Hydrogen Cottrell Atmosphere Formation Around Edge Dislocations in Aluminum

Aluminum alloys are being explored as lightweight structural materials for use in hydrogen-containing environments. In this paper, to understand hydrogen effects on deformation, we perform molecular statics studies of the hydrogen Cottrell atmosphere around edge dislocations in aluminum. First, we calculate the hydrogen binding energies at all interstitial sites in a periodic aluminum crystal containing an edge dislocation dipole. This allows us to use the Boltzmann equation to quantify the hydrogen Cottrell atmosphere. Based on these binding energies, we then construct a continuum model to study the kinetics of the hydrogen Cottrell atmosphere formation. Finally, we compare our results with existing theories and discuss the effects of hydrogen on deformation of aluminum-based alloys.

36 MATERIALS SCIENCE↗

Dislocation-mediated melting of one-dimensional Rydberg crystals

We consider cold Rydberg atoms in a one-dimensional optical lattice in the Mott regime with a single atom per site at zero temperature. An external laser drive with Rabi frequency {Omega} and laser detuning {Delta} creates Rydberg excitations whose dynamics is governed by an effective spin-chain model with (quasi) long-range interactions. This system possesses intrinsically a large degree of frustration resulting in a ground-state phase diagram in the ({Delta},{Omega}) plane with a rich topology. As a function of {Delta}, the Rydberg blockade effect gives rise to a series of crystalline phases commensurate with the optical lattice that form a so-called devil's staircase. The Rabi frequency {Omega}, on the other hand, creates quantum fluctuations that eventually lead to a quantum melting of the crystalline states. Upon increasing {Omega}, we find that generically a commensurate-incommensurate transition to a floating Rydberg crystal that supports gapless phonon excitations occurs first. For even larger {Omega}, dislocations within the floating Rydberg crystal start to proliferate and a second, Kosterlitz-Thouless-Nelson-Halperin-Young dislocation-mediated melting transition finally destroys the crystalline arrangement of Rydberg excitations. This latter melting transition is generic for one-dimensional Rydberg crystals and persists even in the absence of an optical lattice. The floating phase and the concomitant transitions can, in principle, be detected by Bragg scattering of light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dislocation-Grain Boundary Interaction Dataset for FCC Cu

Interactions between dislocations and grain boundaries play a major role in controlling the strength and ductility of structural materials. Experimentally, assessing and probing geometric and stress-based criteria at the local level for dislocation transmission through grain boundaries remains challenging. Therefore, there have been many efforts to systematically generate datasets of dislocation-grain boundary interactions (DGI) via computational models such as molecular dynamics simulations. So far, most DGI datasets have focused only on the subset of nominal minimum-energy grain boundary structures, which limits their applicability, especially to materials processed far from equilibrium. We present a comprehensive database of dislocation-grain boundary interactions for edge, screw, and 60° mixed dislocation with 330 <110> and 257 <112> symmetric tilt grain boundaries (total of 587) in FCC Cu consisting of 73 minimum-energy grain boundary structures and 514 metastable structures. The dataset contains the outcomes for 5234 unique interactions for various dislocation types, grain boundary structures, and applied shear stresses.

36 MATERIALS SCIENCE↗

Electron Screening in Metals

Electron screening enhances cross sections for nuclear reactions at low energies. We have studied the {sup 1}H({sup 7}Li,{alpha}){sup 4}He reaction in inverse kinematics and observed large electron screening only when the metallic targets were under tensile stress. Hydrogen was loaded into Pd and PdAg alloy foils from gas phase and concentrations reached about 0.6 protons per metallic atom. Mechanical pressure creates stress induced states in the metal. Without pressure hydrogen occupies octahedral interstitial positions in the fcc Pd lattice. Under stress some protons move to dislocated octahedral (dis-O) sites in the lattice. We believe that the magnitude of screening in various metals depends on the electron density on dis-O sites in case of fcc lattices or dislocated tetrahedral sites in bcc metals. We are currently trying to confirm the above by determining the electron density at the sites occupied by protons via the measurement of proton Knight's shift with {sup 1}H nuclear magnetic resonance technique.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mesoscale Investigation of Dislocation-Grain Boundary Interactions in Metals and Alloys [Slides]

GBs have been subject of intense study for several years, including the effects of microstructure on mechanical response. Until recently these have been primarily focused on a limited number of idealized GB structures (i.e, the minimum energy structure). We are specifically focusing on changes in local GB structure and the effect this has on dislocation-grain boundary interactions. This will help us to better understand both (more) realistic and general GB structures.

36 MATERIALS SCIENCE↗

Crystallization Dynamics of a Single Layer Complex Plasma

We report a series of complex (dusty) plasma experiments, aimed at the study of the detailed time evolution of the recrystallization process following a rapid quench of a two-dimensional dust liquid. The experiments were accompanied by large-scale (million-particle) molecular dynamics simulations, assuming Yukawa-type interparticle interaction. Both experiment and simulation show a {proportional_to}t{sup {alpha}} (power-law) dependence of the linear crystallite domain size as measured by the bond-order correlation length, translational correlation length, dislocation (defect) density, and a direct size measurement algorithm. The results show two stages of order formation. On short time scales, individual particle motion dominates; this is a fast process characterized by {alpha}=0.93{+-}0.1. At longer time scales, small crystallites undergo collective rearrangement, merging into bigger ones, resulting in a smaller exponent {alpha}=0.38{+-}0.06.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

'Magic numbers' in the melting of a cluster of point charges on a sphere

The thermodynamic properties of a cluster of point Coulomb charges on a sphere have been analyzed using the Monte Carlo method for the number of charges 20 {<=} N {<=} 90. The ground state of the system of charges is described in the model of a closed quasi-two-dimensional triangular lattice with topological defects. We have determined the dependence of the Lindeman parameter {delta}{sub L} of this system on N and on the dimensionless parameter, which is proportional to the temperature T and to the radius R of the cluster, where element is the dielectric constant of the medium and the charge of a particle. The 'magic numbers,' i.e., the N values, for which the melting point of the closed triangular lattice of charges is much higher than those for neighboring N values, have been found. The evolution of the lattice-melting mechanisms with an increase in the number of charges N in a mesoscopic cluster has been analyzed. For N {<=} 32, the melting of the lattice does not involve dislocations (nontopological melting); this behavior of the mesoscopic system of charges on the sphere differs from the behavior of the extended planar two-dimensional system. At N {>=} 50, melting is accompanied by the formation of dislocations. The mechanism of dislocation-free non-topological melting of a closed lattice, which occurs at small N values and is associated with the cooperative rotational motion of 'rings' of particles, has been analyzed. The model has various implementations in the mesoscopic region; in particular, it describes the system of electrons over the liquid-helium cluster, the liquid-helium cluster with incorporated charged particles, a multielectron bubble in liquid helium, a charged quantum dot, etc.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mid-infrared to ultraviolet optical properties of InSb grown on GaAs by molecular beam epitaxy

Spectroscopic ellipsometry was used to investigate the optical properties of an InSb film grown on a GaAs (100) substrate, and to compare the optical properties of InSb film with those of bulk InSb. The film was grown by molecular beam epitaxy under conditions intended to form 90° misfit dislocations at the InSb-GaAs interface. The complex dielectric function obtained in a wide spectroscopic range from 0.06–4.6 eV shows the critical point transitions E{sub 0}, E{sub 1}, E{sub 1} + Δ{sub 1}, E{sub 0}{sup ′}, and E{sub 2}. The amplitudes, energy transitions, broadenings, and phase angles have been determined using a derivative analysis. Comparing film and bulk critical point results reveal that the epitaxial film is nearly relaxed and has bulk-like optical characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase-Specific Elastic/Plastic Interface Interactions in Layered Cr-NiAl Structures

The depth-dependent, as-grown and deformation-induced strain and dislocations partitioned through the interfaces in a two-phase layered NiAl-Cr(Mo) structure are directly measured at the mesoscale using 3-D X-ray microdiffraction. It is demonstrated that in the as-grown, undeformed state, neighboring submicron Cr solid solution and NiAl eutectic lamellae (doped with {approx}3% Mo) form a heterointerface with 180{sup o} rotation around a <1 1 2> pole. It is shown that the mechanical response to the indentation of a layered composite with alternating Cr(Mo)-NiAl lamellae is distinct from the response of single-phase materials. In the center of the indent, after the load is released, the NiAl lamellae are under compressive forward stresses (with the same sign as the indentation-induced compression) while Cr solid solution lamellae are under tensile back stresses (with opposite sign from the indentation load). The depth-dependent alternation of compressive/tensile residual strains in the neighboring Cr solid solution and NiAl lamellae is understood in the framework of the Mughrabi's composite model considering two types of structure elements: harder and softer regions. Under indentation, both kinds of lamellae are assumed to deform compatibly. After the load is released, residual forward stresses are formed in the harder lamellae, and back stresses are formed in the mechanically softer lamellae. Line-broadening analysis of the intensity distribution along the diffraction vector reveals a 15-times increase in dislocation density in the near-surface zone in the center of the indent. Such a large increase is typical for severe deformation.

36 MATERIALS SCIENCE↗

Photodetectors on the basis of Ge/Si(001) heterostructures grown by the hot-wire CVD technique

The fabrication of photodetectors for the wavelength range of communications λ = 1.3–1.55 µm on the basis of Ge/Si(001) heterostructures with thick (∼0.5 µm) Ge layers grown by the hot-wire technique at reduced growth temperatures (350°C) is reported. The single-crystal Ga layers are distinguished by a low density of threading dislocations (∼10{sup 5} cm{sup –2}). The photodetectors exhibit a rather high quantum efficiency (∼0.05 at λ = 1.5 µm and 300 K) at moderate reverse saturation current densities (∼10{sup –2} A cm{sup –2}). Thus, it is shown that the hot-wire technique offers promise for the formation of integrated photodetectors for the wavelength range of communications, especially in the case of limitations on the conditions of heat treatments.

36 MATERIALS SCIENCE↗

Stability and Mobility of Disconnections in Solute Atmospheres: Insights from Interfacial Defect Diagrams

This Letter explores the stability of disconnections (step-dislocation defects) at grain boundaries in binary alloys. We introduce interfacial defect diagrams, derived from atomistic simulations and segregation theory, to predict the stability of disconnections in the temperature-solute concentration phase space and relate it to governing segregation mechanisms. These diagrams reveal multiple stability regimes influenced by solute-induced clustering and pinning effects impacting the thermal migration of disconnections and offering insights into their thermodynamics and kinetic properties.

Crystal structure↗

Atomistic modeling of dislocation-interface interactions

Using atomic scale models and interface defect theory, we first classify interface structures into a few types with respect to geometrical factors, then study the interfacial shear response and further simulate the dislocation-interface interactions using molecular dynamics. The results show that the atomic scale structural characteristics of both heterophases and homophases interfaces play a crucial role in (i) their mechanical responses and (ii) the ability of incoming lattice dislocations to transmit across them.

36 MATERIALS SCIENCE↗

Surface stoichiometry and activity control for atomically smooth low dislocation density ZnO and pseudomorphic MgZnO epitaxy on a Zn-polar ZnO substrate by the helicon-wave-excited-plasma sputtering epitaxy method

The helicon-wave-excited-plasma sputtering (HWPS) method was exemplified to be one of the versatile epitaxial growth techniques for the fabrication of low dislocation density semiconductor epilayers and heterostructures exhibiting atomically smooth surface morphology. For a case study, ZnO homoepitaxy and Mg{sub x}Zn{sub 1-x}O (x=0.08,0.19) heteroepitaxy on a Zn-polar ZnO substrate were carried out. According to the surface damage-free property, high temperature growth with appropriate stoichiometry control enabled the growth of ZnO homoepitaxial layers exhibiting a smooth surface morphology with 0.26 nm high monolayer atomic steps. Their tilt and twist mosaics reflecting the threading dislocation densities having screw and edge components were comparable to those of the substrate, being under the resolution limit (18 arcsec). The surface morphology and crystal mosaicity of pseudomorphic Mg{sub x}Zn{sub 1-x}O (x{<=}0.19) epilayers were quite similar to those of the ZnO underlayer. The luminescence spectra of the ZnO and Mg{sub x}Zn{sub 1-x}O epilayers at 293 K exhibited a predominant near-band-edge emission and negligible broad emission bands due to deep levels. The results indicate that the growth mode of the HWPS method resembles that of molecular beam epitaxy methods.

36 MATERIALS SCIENCE↗

Heavy ion irradiation response of an additively manufactured 316LN stainless steel

Additive manufacturing has become an appealing technique to fabricate three-dimensional metallic materials and components for nuclear reactors. However, response of additively manufactured alloys to high-dose heavy ion irradiations at elevated temperatures is still not well understood. Here, an additively manufactured 316LN austenitic stainless steel with high-density solidification cells was irradiated using 3.5 MeV Fe ion to a peak dose of 220 dpa at 450 °C. Microscopy studies show a lower Frank loop density and smaller size in the additively manufactured sample compared with its cold worked counterpart, and the cellular structures may largely suppress the formation of perfect loops and dislocation networks and reduce the magnitude of solute segregations comparing with high angle grain boundaries. In conclusion, the present work advances the understanding on the high-temperature irradiation response of additively manufactured steels for nuclear reactor applications.

36 MATERIALS SCIENCE↗

Automated Quantitative Analysis of Extended Irradiation Defects - Dislocations, Voids and Precipitates in Neutron Irradiated HT-9 Steel

Structural alloys that make up the core components of nuclear reactors are exposed to radiation that can substantially alter the microstructure and mechanical properties of the material. Irradiation can cause the formation of extended defects including dislocation line and loops, voids and various types of precipitates. To understand the irradiation effects, it is critical to characterize these defects individually and collectively to quantify how they evolve throughout irradiation stages. Transmission electron microscopy (TEM) is a standard tool for providing extensive size, number density and spatial distribution of extended irradiation defects, however, manual measurement of defect size and number density requires time-intensive effort to analyze enough defects that provide a statistically meaningful result and are prone to errors of subjectivity. In this work, we developed a set of MATLAB algorithms offering robust and automated identification and quantification of extended irradiation defects like dislocation lines, voids and precipitates commonly observed in neutron irradiated cladding alloys [1]. Using a neutron-irradiated HT-9 martensitic alloy irradiated at 412°C to 111.8 dpa, we demonstrate the capability of these algorithms for quantitative defect analysis. Figure 1 presents defect images of the HT-9 using an advanced diffraction contrast imaging scanning transmission electron microscopy (DCI STEM) that suppresses bend contours and provides better defect contrast compared to conventional TEM [2]. The first step of defect analysis is defect identification, a process that can be digitally achieved by contrast thresholding (for simple defect contrast) and by machine learning computer vision for defect semantic segmentation [3]. Here, labeled binary defect images (Figures 2a and 2c) were used. For dislocation density quantification, we employed an optimized circular-grid intersection method first introduced by Dr. John Steeds [4]. This method is shown in Figures 2a and 2b, where the number of intersections of dislocation lines with circular traces was measured. This produces an unbiased sampling of dislocation lines, regardless of their orientation. This process was optimized with automated digital intersection number and grid length registration. Interestingly, it was found that a relatively large number of circles in a set circular gird is was needed to produce an invariant result (Figure 2b), with a low systematic measurement error. This demonstrates the main advantage of computer-based defect analysis, in performing repetitive operations quickly with a reduced systematic error. For the quantitative analysis of voids and precipitates a challenge encountered with automated defect analysis is feature overlap, particularly when the density of voids/precipitates is high. To mitigate this problem, as shown in Figure 2d, we modified the popular circular Hough transformation and treated ‘circular shape’ as the particle descriptor for voids/precipitates, efficiently resolving the overlapping particles. In summary, this automated digital quantification together with machine learning enabled defect identification [3] opens new opportunities for standardizing the characterization workflow for quantitative analysis of extended irradiation defects.

Sainju, Rajat↗