Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Investigation on transition behavior and electrical properties of (K{sub 0.5}Na{sub 0.5}){sub 1-x}Li{sub x}Nb{sub 0.84}Ta{sub 0.1}Sb{sub 0.06}O{sub 3} around polymorphic phase transition region

(K{sub 0.5}Na{sub 0.5}){sub 1-x}Li{sub x}Nb{sub 0.84}Ta{sub 0.1}Sb{sub 0.06}O{sub 3} (KNLNTS) lead free ceramics with different Li concentration were fabricated by conventional solid-state reaction method. By increasing Li ions in KNLNTS, the grains grow up and the crystal structure changes from orthorhombic to tetragonal. When 0.03 ≤ x ≤ 0.05, the ceramics structure lays in PPT region. Polarization versus electric field (P-E) hysteresis loops at room temperature show good ferroelectric properties and the remnant polarization decreases by increasing Li content while coercive electric keeps almost unchanged. In PPT region, taking x = 0.04 as an example, the sample shows excellent dielectric properties: the dielectric constant is 1159 and loss tangent is 0.04, while the piezoelectric constant d{sub 33} is 245 pC/N and kp is 0.44 at room temperature, it is promising for (K{sub 0.5}Na{sub 0.5}){sub 1-x}Li{sub x}Nb{sub 0.84}Ta{sub 0.1}Sb{sub 0.06}O{sub 3} with 4 at. % Li to substitute PZT.

36 MATERIALS SCIENCE↗

Synthesis, structure and electrical properties of a new tin vanadium selenide

The turbostratically disordered misfit layer compound (SnSe){sub 1.15}VSe{sub 2} was synthesized and structurally characterized. Electrical transport measurements suggest this compound undergoes a charge or spin density wave (CDW or SDW) transition, which has not been observed in previous misfit layer compounds. The (SnSe){sub 1.15}VSe{sub 2} compound, created through the modulated elemental reactants technique, contains highly oriented intergrowths of SnSe bilayers and VSe{sub 2} structured Se–V–Se trilayers with abrupt interfaces between them perpendicular to the c-axis. X-ray diffraction data and transmission electron microscope images show that each constituent has in-plane crystallinity but that there is a random rotational disorder between the constituent layers. Temperature-dependent electrical resistivity data and Hall measurements are consistent with (SnSe){sub 1.15}VSe{sub 2} being a metal, however an abrupt increase in the resistivity occurs between 30 and 100 K. The carrier concentration decreases by approximately 1 carrier per vanadium atom during this temperature interval. - Graphical abstract: Turbostratically disordered (SnSe){sub 1.15}VSe{sub 2}. - Highlights: • New compound (SnSe){sub 1.15}VSe{sub 2}. • Turbostratic disorder. • Charge density wave at 100 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth and electrical properties of ultrafine fibers

This paper reports on free-standing ultrafine fibers formed using the gas-evaporation method in the presence of electric fields. Materials up to 10 cm in length have been prepared in this way. Electrical measurements on Pd fibers 3 mm in length and about 200-300 A in diameter are given.

Webb, G. W.↗

Improved electrical properties of n-type SiGe alloys

The effect of changes in the carrier concentration and mobility for heavily doped n-type SiGe on the electrical power factor has been investigated. It has been shown that power factors of 37-40 microV/cm-K-squared can be achieved with carrier concentrations of 2.0 - 2.5 x 10 exp 20/cu cm and mobilities of 38-40 sq cm/V-sec. Many samples with suitable carrier concentration do not have high mobilities and some rationale for this behavior is presented. Initial results are presented on fabrication of n-type samples from ultrafine powders. The emphasis in this work is to achieve thermal conductivity reductions by adding inert particles to scatter midfrequency phonons.

Scoville, A. N.↗

Silicon-on-insulator structures with a nitrogenated buried SiO{sub 2} layer: Preparation and properties

Electrical properties of silicon-on-insulator (SOI) structures with buried SiO{sub 2} layer implanted with nitrogen ions are studied in relation to the dose and energy of N{sup +} ions. It is shown that implantation of nitrogen ions with doses >3 Multiplication-Sign 10{sup 15} cm{sup -2} and an energy of 40 keV brings about a decrease in the fixed positive charge in the oxide and a decrease in the density of surface stares by a factor of 2. An enhancement of the effect can be attained by lowering the energy of nitrogen ions. The obtained results are accounted for by interaction of nitrogen atoms with excess silicon atoms near the Si/SiO{sub 2} interface; by removal of Si-Si bonds, which are traps of positive charges; and by saturation of dangling bonds at the bonding interface of the SOI structure.

36 MATERIALS SCIENCE↗

Pyrochlore type semiconducting ceramic oxides in Ca-Ce-Ti-M-O system (M = Nb or Ta)-Structure, microstructure and electrical properties

A new series of pyrochlore type ceramic semiconducting oxides in Ca-Ce-Ti-M-O (M = Nb or Ta) system has been synthesized by the conventional ceramic route. The electrical conductivity measurements show that these oxides exhibit semiconducting behavior and the conductivity increases with the Ce content in the compound. Activation energy of the current carriers is in the range of 0.5-1.6 eV. The electrical conductivity in these oxides is due to the presence of Ce{sup 3+}, which remains in the reduced state without being oxidized to Ce{sup 4+} by structural stabilization. The photoluminescence and X-ray photoelectron spectroscopy analysis corroborate the presence of Ce in the 3+ state. Impedance spectral analysis is carried out to evaluate the transport properties and indicates that the conduction in these compounds is mainly due to electronic contribution. The X-ray powder diffraction and Raman spectroscopy analysis establishes that these oxides belong to a cubic pyrochlore type structure.

36 MATERIALS SCIENCE↗

Studies on synthesis of reduced graphene oxide (RGO) via green route and its electrical property

Highlights: • RGO-1 and RGO-2 were synthesized by green method using different phytoextracts. • M. indica L., S. tuberosum L. phytoextracts act as reducing and stabilizing agents. • Conjugated structure of graphene is established following partial reduction of GO. • Electrical conductivities of RGO-1 and RGO-2 are higher than GO. - Abstract: An environmentally friendly method has been applied for the preparation of reduced graphene oxide (RGO). This method was developed by using polyphenols that contained a phytoextract of Mangifera indica L. along with Solanum tuberosum L. as reducing agents since they are non-toxic and naturally available. The phytoextracts used in the production of RGO was set between 60 and 70 °C. Graphene oxide (GO) was prepared by modified Hummer’s method as reported in earlier findings. Structural and morphological studies demonstrate that the part of the oxygen functionalities in GO can be removed by following green reduction. Characterizations of the resulting product have been done by X-ray diffraction, FTIR, UV–vis and Raman spectroscopy. FESEM, TEM, EDX spectrum, TGA, DLS and Zeta potential measurements of the samples have also been carried out to study the morphological, thermal and surface charge characteristics. Electrical conductivity was also measured to check the extent of reduction of GO to RGO.

36 MATERIALS SCIENCE↗

Electric Field Tuning Molecular Packing and Electrical Properties of Solution-Shearing Coated Organic Semiconducting Thin Films

Recent improvements in solution-coated organic semiconductors (OSCs) evidence their high potential for cost-efficient organic electronics and sensors. Molecular packing structure determines the charge transport property of molecular solids. However, it remains challenging to control the molecular packing structure for a given OSC. Here, the application of alternating electric fields is reported to fine-tune the crystal packing of OSC solution-shearing coated at ambient conditions. First, a theoretical model based on dielectrophoresis is developed to guide the selection of the optimal conditions (frequency and amplitude) of the electric field applied through the solution-shearing blade during coating of OSC thin films. Next, electric field-induced polymorphism is demonstrated for OSCs with both herringbone and 2D brick-wall packing motifs in 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene and 6,13-bis(triisopropylsilylethynyl) pentacene, respectively. Favorable molecular packing can be accessible in some cases, resulting in higher charge carrier mobilities. In conclusion, this work provides a new approach to tune the properties of solution-coated OSCs in functional devices for high-performance printed electronics.

36 MATERIALS SCIENCE↗

Electrical properties and scaling behaviour of rare earth based Ho{sub 2}CoZrO{sub 6} double perovskite ceramics

Graphical abstract: The X-ray diffraction analysis suggests that the compound crystallizes in monoclinic phase at room temperature with β = 108.51 ± 0.021° (a = 8.1858 ± 0.0023 Å, b = 5.2599 ± 0.0027 Å, c = 7.9874 ± 0.0031 Å) and cell volume = 324.17 Å{sup 3}. The SEM image indicates the uniformity of the grains in the samples. The grain size of the microstructure of HCZ is found to be ∼0.48 μm on average. Display Omitted Highlights: ► The conduction mechanism in HCZ may be due to hopping of small polaron. ► The material shows semiconducting behaviour. ► Conductivity obeys Jonscher's power law with high frequency dispersion. ► Both long-range and localized relaxation are present. -- Abstract: The Ho{sub 2}CoZrO{sub 6} (HCZ) double perovskite has been prepared in polycrystalline form by solid state reaction technique. The analysis of the X-ray powder diffraction pattern indicates that the crystal structure is monoclinic at room temperature with cell parameters a = 8.1858 ± 0.0023 Å, b = 5.2599 ± 0.0027 Å, c = 7.9874 ± 0.0031 Å and β = 108.51 ± 0.021°. The compound shows significant frequency dispersion in its dielectric properties. The Cole–Cole model is used to determine the polydispersive nature of dielectric relaxation. The scaling behaviour of dielectric loss and imaginary electric modulus suggest that the relaxation describe same mechanism at various temperatures. Impedance data presented in the Nyquist plot (Z″ versus Z′) are used to identify an equivalent circuit and to know the bulk and interface contributions. The complex impedance analysis of HCZ exhibits the appearance of both the grain and the grain-boundary contribution. The frequency dependent conductivity spectra follow the universal power law. The magnitude of the activation energy indicates that the carrier transport is due to the hopping conduction.

36 MATERIALS SCIENCE↗

Synthesis and electrical properties of Bi{sub 2}Te{sub 3}-based thermoelectric materials doped with Er, Tm, Yb, and Lu

Nanopowders of Bi{sub 2}Te{sub 3} and R{sub 0.1}Bi{sub 1.9}Te{sub 3} (where R = Er, Tm, Yb, Lu) are obtained by microwave solvothermal synthesis. The powder-like materials are compacted by cold isostatic compression followed by annealing in argon. The influence of the doping agent on the structure and characteristics of the derived materials are investigated. It is demonstrated that the introduction of rare-earth elements (2 at %) into the bismuth-telluride lattice leads to a decrease in the electrical resistivity and to an increase in the Seebeck coefficient. The best thermoelectric properties are obtained for the sample of bismuth telluride doped with thulium.

36 MATERIALS SCIENCE↗

effect of the parameters of AlN/GaN/AlGaN and AlN/GaN/InAlN heterostructures with a two-dimensional electron gas on their electrical properties and the characteristics of transistors on their basis

The effect of the layer thickness and composition in AlGaN/AlN/GaN and InAlN/AlN/GaN transistor heterostructures with a two-dimensional electron gas on their electrical and the static parameters of test transistors fabricated from such heterostructures are experimentally and theoretically studied. It is shown that the use of an InAlN barrier layer instead of AlGaN results in a more than twofold increase in the carrier concentration in the channel, which leads to a corresponding increase in the saturation current. In situ dielectric-coating deposition on the InAlN/AlN/GaN heterostructure surface during growth process allows an increase in the maximum saturation current and breakdown voltages while retaining high transconductance.

36 MATERIALS SCIENCE↗

Thermal and plasma enhanced atomic layer deposition of TiO{sub 2}: Comparison of spectroscopic and electric properties

Titanium oxide (TiO{sub 2}) deposited by atomic layer deposition (ALD) is used as a protective layer in photocatalytic water splitting system as well as a dielectric in resistive memory switching. The way ALD is performed (thermally or plasma-assisted) may change the growth rate as well as the electronic properties of the deposited films. In the present work, the authors verify the influence of the ALD mode on functional parameters, by comparing the growth rate and electronic properties of TiO{sub 2} films deposited by thermal (T-) and plasma-enhanced (PE-) ALD. The authors complete the study with the electrical characterization of selected samples by means of capacitance–voltage and current–voltage measurements. In all samples, the authors found a significant presence of Ti{sup 3+} states, with the lowest content in the PE-ALD grown TiO{sub 2} films. The observation of Ti{sup 3+} states was accompanied by the presence of in-gap states above the valence band maximum. For films thinner than 10 nm, the authors found also a strong leakage current. Also in this case, the PE-ALD films showed the weakest leakage currents, showing a correlation between the presence of Ti{sup 3+} states and leakage current density.

36 MATERIALS SCIENCE↗

Electrical Properties of Intercalated Ag{sub x}MoSe{sub 2} Compounds in Constant and Alternating Fields

On intercalated Ag{sub x}MoSe{sub 2} samples, in addition to temperature measurements of the direct current electrical resistivity, measurements of the alternating current resistivity using the impedance spectroscopy technique are carried out in a wide frequency range and at different temperatures. The activation behavior of the d.c. conductivity, which increases with increasing silver content in the samples, is shown. The a.c. conductivity undergoes frequency dispersion, described by a “universal dynamic response” (UDR). It is shown that the relaxation processes during charge transfer in a variable field are accelerated with increasing silver content in the samples and with increasing temperature. The data obtained are analyzed using the models of the band and hopping conduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure dependence of the electrical properties of GaBi solidified in low gravity

Immiscible GaBi alloys were solidified during free fall in the NASA Marshall Space Flight Center drop tower, which provides about 4.5 seconds of low gravity. The electrical resistivity and magnetic susceptibility were measured as a function of pressure (up to 18 kbar) and temperature (300 K to 4.2 K) of drop tower (DT) and ground control (GC) samples prepared under identical conditions, except for gravity. At ambient pressure the electrical resistance of the DT sample exhibits a broad maximum at 100 K, while that of GC sample decreases rapidly as temperature decreases. Both DT and GC samples become superconducting at 7.7 K. However, a minor second superconducting phase with a transition temperature at 8.3 K is observed only in the DT samples.

Wu, M. K.↗

Luminescence and electrical properties of single ZnO/MgO core/shell nanowires

To neutralise the influence of the surface of ZnO nanowires for photonics and optoelectronic applications, we have covered them with insulating MgO film and individually contacted them for electrical characterisation. We show that such a metal-insulator-semiconductor-type nanodevice exhibits a high diode ideality factor of 3.4 below 1 V. MgO shell passivates ZnO surface states and provides confining barriers to electrons and holes within the ZnO core, favouring excitonic ultraviolet radiative recombination, while suppressing defect-related luminescence in the visible and improving electrical conductivity. The results indicate the potential use of ZnO/MgO nanowires as a convenient building block for nano-optoelectronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigations of room temperature multiferroic and magneto-electric properties of (1-Φ) PZTFT-Φ CZFMO particulate composites

Multiferroic composites consisting of a single-phase multiferroic [0.6(PbZr 0.53 Ti 0.47 O 3 )-0.4(PbFe 0.5 Ta 0.5 )O 3 ] as a matrix and a magnetostrictive phase (Co 0.6 Zn 0.4 Fe 1.7 Mn 0.3 O 4 ) dispersed in the matrix are fabricated via hybrid synthesis technique. The structure and surface morphology studies using x-ray diffraction and field emission scanning electron microscopy techniques indicate the formation of 3-0 type particulate composites. Coexistence of soft-magnetic behavior and ferroelectric characteristics are confirmed for composites from magnetization vs magnetic field (M–H) and polarization vs electric field (P–E) measurements, respectively. Magneto-dielectric (MD) measurement shows significant changes in the dielectric properties with the application of a magnetic field, indicating the existence of strong MD behavior. The biquadratic nature of magneto-electric (ME) coupling is described by the Landau free energy equation arising from the strain transfer at the interfaces between the constituent phases. The direct magneto-electric voltage coefficient measurement also confirms very strong coupling between ferroelectricity and magnetism and supports the strain-mediated magneto-electric effect in composites. The Φ = 0.3 composite exhibits the maximum ME coefficient of 20.72 mV/cm Oe with M S = 24.62 emu/g, H C = 59.66 Oe, and piezoelectric coefficient value d 33 = 19 pC/N. In conclusion, the strong magneto-electric effect along with low dielectric loss at room temperature in these composites suggests their suitability for multifunctional magneto-electric device applications such as magnetic sensors, etc.

36 MATERIALS SCIENCE↗

Tuning Electrical Properties through Control of TiSe 2 Thickness in (BiSe) 1+δ (TiSe 2 ) n Compounds

A series of (BiSe) 1+δ (TiSe 2 )n compounds where n was varied from two to four were synthesized and electrically characterized to explore the extent of charge transfer from the BiSe layer to the TiSe 2 layers. These kinetically stable heterostructures were prepared using the modulated elemental reactants (MER) method, in which thin amorphous elemental layers are deposited in an order that mimics the nanostructure of the desired product. X-ray diffraction (XRD), X-ray area diffraction, and scanning transmission electron microscopy (STEM) data show that the precursors formed the desired products. Specular diffraction scans contain only 00l reflections, indicating that the compounds are crystallographically aligned with the c-axis perpendicular to the substrate. The c-axis lattice parameter increases by 0.604(3) nm with each additional TiSe 2 layer. In-plane diffraction scans contain reflections that can be indexed as the (hk0) of the BiSe and TiSe 2 constituents. Area diffraction scans are also consistent with the samples containing only BiSe and TiSe 2 constituents. Rietveld refinement of the 00l XRD data was used to determine the positions of atomic planes along the c-axis. STEM data supports the structures suggested by the diffraction data and associated refinements but also shows that antiphase boundaries occur approximately 1/3 of the time in the BiSe layers. All samples showed metallic behavior for the temperature-dependent electrical resistivity between 20 K and room temperature. Electrical measurements indicated that charge is transferred from the BiSe layer to the TiSe 2 layer. The measured Hall coefficients were all negative indicating that electrons are the majority carrier and are systematically decreased as n was increased. Assuming a single parabolic band model, carrier concentration decreased when the number of TiSe 2 layers is increased, suggesting that the amount of charge donated by the BiSe layer to the TiSe 2 layers is constant. Seebeck coefficients were negative for all of the (BiSe) 1+δ (TiSe 2 ) n compounds studied, indicating that electrons are the majority carrier, and decreased as n increased. Lastly, the effective mass of the carriers was calculated to be 5–6 m e for the series of compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗