Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electric vehicles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Value-creating upcycling of retired electric vehicle battery cathodes

The electrification revolution in the automobile and other industries demands annual production capacity of batteries of at least 10 2 GWh, which presents a twofold challenge: supply of key materials such as cobalt and nickel and recycling when batteries are retired from use. Pyrometallurgical and hydrometallurgical recycling are currently used in industry but suffer from complexity, high costs, and secondary pollution. Here we report a molten-salt-based method for direct recycling (MSDR) that is environmentally benign and creates value on the basis of a techno-economic analysis using real-world data and price information. We also experimentally demonstrate the feasibility of MSDR by upcycling a low-nickel polycrystalline LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC) cathode material into Ni-rich (Ni > 65%) single-crystal NMCs with increased energy density (>10% increase) and outstanding electrochemical performance (>94% capacity retention after 500 cycles). This work may open opportunities for closed-loop recycling of electric vehicle batteries and manufacturing of next-generation NMC cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Design for Recycling Principles Applicable to Selected Clean Energy Technologies: Crystalline-Silicon Photovoltaic Modules, Electric Vehicle Batteries, and Wind Turbine Blades

Abstract The global growth of clean energy technology deployment will be followed by parallel growth in end-of-life (EOL) products, bringing both challenges and opportunities. Cumulatively, by 2050, estimates project 78 million tonnes of raw materials embodied in the mass of EOL photovoltaic (PV) modules, 12 billion tonnes of wind turbine blades, and by 2030, 11 million tonnes of lithium-ion batteries. Owing partly to concern that the projected growth of these technologies could become constrained by raw material availability, processes for recycling them at EOL continue to be developed. However, none of these technologies are typically designed with recycling in mind, and all of them present challenges to efficient recycling. This article synthesizes and extends design for recycling (DfR) principles based on a review of published industrial and academic best practices as well as consultation with experts in the field. Specific principles developed herein apply to crystalline-silicon PV modules, batteries like those used in electric vehicles, and wind turbine blades, while a set of broader principles applies to all three of these technologies and potentially others. These principles are meant to be useful for stakeholders—such as research and development managers, analysts, and policymakers—in informing and promoting decisions that facilitate DfR and, ultimately, increase recycling rates as a way to enhance the circularity of the clean energy economy. The article also discusses some commercial implications of DfR. Graphical Abstract

36 MATERIALS SCIENCE↗
DOE OSTI2024

Analysis of Automated Transit Network Systems with Battery-Electric Vehicles in Automated Mobility Districts: Preprint

The paper provides an overview of the insights and findings of the National Renewable Energy Laboratory's (NREL) ongoing research on the implementation of automated mobility districts (AMDs). AMD is a term coined by NREL to describe a geographically defined district or major activity center located in a dense urban setting with mobility applications provided by automated/autonomous vehicle (AV) systems spanning internal circulation and first-mile/last-mile connections to regional transportation hubs. Research over the past five years has focused on understanding the evolution of AMDs, beginning with demonstrations of automated shuttles prior to the pandemic, to more integrated on-demand mobility systems currently in initial stages of deployment. Initial insights and findings from earlier studies include the need for designation of a "jurisdiction having authority," a clear vision of a complete system to provide end-to-end mobility services, and the requisite intelligent infrastructure to complement AV technology. NREL's most recent Phase III research investigates station boarding/alighting (curb) issues, the full electrification of fleets, and the need for a systems engineering methodology (SEM) to properly analyze the complexities resulting from the convergence of automation, on-demand mobility, and electrification of the transit systems within the AMD. The paper reviews the findings of AMD research conducted during Phase I, II, and III, with special emphasis on Phase III results with respect to a descriptive example of the proposed SEM when a "digital twin" analytical model is used to simulate the transport fleet's battery-electric vehicle miles of travel and associated duty cycles through a rigorous analytical assessment with a comprehensive modeling process.

ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1981

Continuously variable transmission: Assessment of applicability to advance electric vehicles

A brief historical account of the evolution of continuously variable transmissions (CVT) for automotive use is given. The CVT concepts which are potentially suitable for application with electric and hybrid vehicles are discussed. The arrangement and function of several CVT concepts are cited along with their current developmental status. The results of preliminary design studies conducted on four CVT concepts for use in advanced electric vehicles are discussed.

Loewenthal, S. H.↗
DOE OSTI2025

Power Quality and Load Capacity Evaluations of an Electric Vehicle for Multi-Robot System Applications

This paper evaluates the capability of a fully electric pickup truck, using the Ford F-150 Lightning as an example, to provide power to the circuit of a multi-robot system. The case study was conducted on a simulated INL Autonomous Pit Exploration System (APES) designed for the inspection of nuclear waste tank pits. Through a series of controlled tests, the vehicle’s power delivery consistency, load-handling capability, and battery performance were assessed under various conditions. First of all, the load test demonstrated that the vehicle provided stable power with low distortion and no unexpected interruptions. Second, during the operational limit test, the 240V system sustained loads up to 7.4 kW before tripping, providing insights into its operational limits. Last but not least, during a simulated full-scale APES operation, the vehicle’s battery depleted by only 6% over an hour, indicating sufficient capacity for extended use while retaining reserve power for transportation needs. This study highlights the potential of electric vehicles as reliable power sources for field operations, contributing to the advancement of sustainable technologies by reducing reliance on traditional fossil fuel generators and promoting the integration of clean energy solutions in remote and challenging environments.

Electric vehicle↗
DOE OSTI2022

Regional Variation in Light-Duty Plug-in Electric Vehicle Emissions

Automobile electrification is viewed as one of the key requirements for deep decarbonization of transportation. However, the exact magnitude of decarbonization from switching from a combustion of petroleum-based fuels to grid-derived electricity is a complex issue. Variations in local grid mixes lead to differing carbon intensities of electricity in different regions. This complexity is compounded by geographical differences in vehicle characteristics. This analysis considers these geographic differences to produce a historical assessment of the fuel-cycle carbon emissions of plug-in electric vehicles (PEVs) in the United States from 2011 to 2021. We find that PEVs in the United States decreased in electricity-derived carbon intensity, from 187 grams per mile to 110 grams per mile from 2011 to 2021 due to improvements in the electric grid and vehicle efficiency. Through 2021, PEVs emitted a total of 13.6 million metric tons of greenhouse gas (GHG) emissions in the United States, including both emissions from electricity and gasoline, while driving a total of 100 billion miles. Of this total, 8.39 million metric tons was due to electricity consumption. Over the same distance, comparable gasoline vehicles would have emitted between 29 and 41 million metric tons of GHG, leading to a reduction of 15 to 27 million metric tons. Relative to national-level assessments that do not factor in this regional difference, these electric vehicles resulted in 13% greater reductions in GHG emissions than previously calculated. In the future, announced goals to further decarbonize the electricity sector will continue to reduce the emissions of PEVs, including reducing emissions rates for vehicles already on the road, further improving the benefits relative to the unchanging emissions of contemporaneous gasoline vehicles.

02 PETROLEUM↗
DOE OSTI2023

An Integrated Electric Vehicle Drive Motor and Wireless Charger

This work proposes an in-wheel electric vehicle-motor in which the motor windings also act as receiver coils in a wireless charging system. Vehicle wireless charging systems normally include a receiver coil, compensation network, rectifier and battery charger. The proposed concept would eliminate the need for a separate receiver coil. Studies based on two-dimensional finite element analysis are carried out to verify the feasibility of the concept. An external rotor Halbach array rotor with single layer fractional slot concentrated wingdings is found to be a suitable motor topology which would enable the use of one or more motor coils as a receiver coil. The paper also discusses the design modifications and considerations required to enable this.

Rallabandi, Vandana↗
NASA NTRS1981

Characterization of the near-term electric vehicle (ETV-1) breadboard propulsion system over the SAE J227a driving schedule D

The electric test vehicle one (ETV-1) was built from the ground up with present state of the art technology. Two vehicles were built and are presently being evaluated by NASA's Jet Propulsion Laboratory (JPL). A duplicate set of propulsion system components was built, mounted on a breadboard, and delivered to NASA's Lewis Research Center for testing on the road load simulator (RLS). Driving cycle tests completed on the system are described.

Sargent, N. B.↗
DOE OSTI2026

Scaled Implementation of Smart Charge Management for Electric Vehicles

Smart charge management (SCM) has become a critical strategy for mitigating potential grid impacts and reducing electricity costs for all customers. This study will evaluate the economics of implementing light-duty EV SCM at scale across the United States. This work will enhance distribution system analysis by estimating SCM implementation costs, exploring viable business cases, and developing a framework for national-level applications. The primary methodology involves leveraging detailed grid modeling from a specific service territory and using spatial extrapolation techniques to generalize findings to other regions. The analysis will develop key metrics to quantify the costs and benefits of SCM, including implementation costs relative to strategy and scale, the cost of distribution system upgrades with and without SCM, and the percentage of peak-load reduction. The objective is to produce a comprehensive report and a parameterized framework that enables utilities to self-assess the value of SCM in their own service territories. This will support the development of cost-effective charging strategies, accelerate the energization of new EV chargers, and facilitate the seamless integration of EVs into the nation's power grid.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1972

Space vehicle electrical power processing distribution and control study. Volume 1: Summary

A concept for the processing, distribution, and control of electric power for manned space vehicles and future aircraft is presented. Emphasis is placed on the requirements of the space station and space shuttle configurations. The systems involved are referred to as the processing distribution and control system (PDCS), electrical power system (EPS), and electric power generation system (EPGS).

Krausz, A.↗
NASA NTRSDate not supplied

Hybrid Modeling of Unmanned Aerial Vehicle Electric Powertrain for Fault Detection and Diagnostics

This paper shows the application of hybrid physics-informed machine learning to a representative electric powertrain for unmanned aerial vehicles. The model is composed of physics-derived principles and empirical equations, as well as fully connected networks that are strategically placed within the model to substitute equations that are subject to large uncertainty. Polynomial fit driven by heuristics or empirical observations can be substituted by more flexible networks that can minimize the error between model predictions and observations without being restricted to a predefined functional form. This modeling strategy allows training of networks deep inside the model and unknown parameters in a single learning stage. It has already been applied to Li-ion batteries in the past, and in this work, we extend the applications to other components of an electric powertrain, namely electronic speed controller with pulse-width modulation, and brushless DC motor with connected propeller. Training and testing of the model is carried out using experimental data from Li-ion battery discharge and powertrain testing in a laboratory environment.

Physics-Informed Machine Learning↗
DOE OSTI2024

Rooftop Photovoltaics and Electric Vehicle Co-Adoption: Attitudes, Norms, Diffusion, and Economics

The overall objectives of the project were to (1) Identify personal and social norms, peer effects, demographics and contextual factors (such as household energy expenditures, experience with outages, charging infrastructure availability) that may facilitate or hinder Solar-EV co-adoption; (2) outline strategies for the design of programs and practices that will enable reasoned RPV and EV adoption and their co-adoption; and (3) assemble a dataset comprised of survey responses of RPV-EV co-adopters, RPV-only adopters, EV-only adopters, and non-adopters. These objectives were only partially fulfilled given the decision to terminate the project. The research team was able to complete the semi-structured interviews, the core BY1 task and summarize the results below. As well, once the team learned of the research project’s fate, it sought and obtained the DOE SETO Technical Manager’s approval to repurpose funds for BY2 tasks to the extent feasible. Rather than invest further resources in expanding the pool of potential survey respondents and having no budget to survey, the research team repurposed funds subject and undertook a more limited (geographically) survey, but also expanded to it to include contingent valuation questions. The analysis of the survey data will necessarily be delayed given the lack of budget support, although some information on the respondent sample is in the results. Given a lack of attention to co-adoption previously, the insights generated in this project should assist decision-makers and industry actors in the development of programs and practices that enable reasoned RPV adoption and EV adoption and their co-adoption.

14 SOLAR ENERGY↗
DOE OSTI2026

Pilot Heavy-Duty Electric Vehicle Deployment for Anchorage, Alaska, Municipal Solid Waste Collection

Through a grant awarded by the U.S. Department of Energy, the Municipality of Anchorage initiated a pilot program in their Solid Waste Services (SWS) department to add heavy-duty electric trucks to its vehicle fleet. The project involves the purchase and deployment of a Peterbilt 220EV electric box truck and two Peterbilt 520EV heavy-duty electric refuse trucks. The Alaska Center for Energy and Power at the University of Alaska Fairbanks performed data analysis. Data collected include telemetry data from both types of electric trucks, charging data from the 520EV telemetry data and a Level 2 charger, and facility-level electric use data.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Pilot Heavy-Duty Electric Vehicle Deployment for Anchorage, Alaska, Municipal Solid Waste Collection

Through a grant awarded by the U.S. Department of Energy, the Municipality of Anchorage initiated a pilot program in their Solid Waste Services (SWS) department to add heavy-duty electric trucks to its vehicle fleet. The project involves the purchase and deployment of a Peterbilt 220EV electric box truck and two Peterbilt 520EV heavy-duty electric refuse trucks. The Alaska Center for Energy and Power at the University of Alaska Fairbanks performed data analysis. Data collected include telemetry data from both types of electric trucks, charging data from the 520EV telemetry data and a Level 2 charger, and facility-level electric use data.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗