Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Multi stage and illumination dependent segregation in MAPb(I,Br)3

© COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only. An unsolved problem of mixed halide perovskites is the light induced compositional instability. Under illumination microscopic clusters with a higher iodide content form which act as efficient recombination centers reducing device performance. In photoluminescence measurements this leads to the development of a secondary peak at low energies that increases in intensity and shifts towards lower energies. Different theories for about the origin have been developed but the underlying key mechanisms are still under debate. In the presented study the photoluminescence evolution of MAPb(I1.5Br1.5) perovskites with varying microstructure is investigated at various excitation densities and temperatures. We find a more evolved segregation mechanism with an intermediate stage between the commonly reported mixed phase and the appearance of the I-rich clusters (Br content < 50%). In this intermediate stage perovskite domains with nearly pure iodide content form (Br content < 25%). Using low excitation densities, the interplay between the I-rich domains and the I-rich clusters leads to a blue shift of the conjunct I-rich luminescence peak. At high excitation densities the I-rich domains and the I-rich clusters are clearly distinguishable, due to a stronger PL response of the I-rich domains. With continuous illumination more I-rich cluster form acting as carrier traps and recombination centers. Due to this, the influence of the few I-rich domains on the PL signature decreases leaving only the commonly reported red shift of the I-rich clusters at later stages of the segregation. The formation of the I-rich domains is fully reversible in the dark and occurs also at elevated temperatures. Measurements on sample with varying grain size further indicate an enhanced formation of those I-rich domains on samples with high grain boundary density possibly by a faster halide mobility along them.

Babbe, F↗

Semiconductor Behavior and Room Temperature Ferromagnetism in e-Beam Evaporated Co/TiO{sub 2} Multilayer Thin Films

The Co/TiO{sub 2} multilayer thin films have been deposited by e-beam evaporation method on glass substrates in vacuum and annealed in air at 773 K for 1 h. The crystal structure, surface morphology, optical properties, electrical properties and magnetic properties of Co/TiO{sub 2} multilayer thin films have been systematically investigated. The results showed that the particle sizes were significantly reduced when the samples are annealed and the enlargement of particle size occurred when the samples thickness is increased. The spectroscopic analysis exhibited enhanced transmittance and higher optical band gap of annealed sample than the as-deposited one and it was decreased with sample thickness. The resistivity measurement confirmed resistivity decreament with temperature. Furthermore, by investigating the magnetic properties, room temperature ferromagnetism was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of the VVV Survey RR Lyrae Population across the Southern Galactic Plane

Deep near-IR images from the VISTA Variables in the Vía Láctea (VVV) Survey were used to search for RR Lyrae stars in the Southern Galactic plane. A sizable sample of 404 RR Lyrae of type ab stars was identified across a thin slice of the fourth Galactic quadrant (295° < ℓ < 350°, −2.°24 < b < −1.°05). The sample’s distance distribution exhibits a maximum density that occurs at the bulge tangent point, which implies that this primarily Oosterhoff type I population of RRab stars does not trace the bar delineated by their red clump counterparts. The bulge RR Lyrae population does not extend beyond ℓ ∼ 340°, and the sample’s spatial distribution presents evidence of density enhancements and substructure that warrants further investigation. Indeed, the sample may be employed to evaluate Galactic evolution models, and is particularly lucrative since half of the discovered RR Lyrae are within reach of Gaia astrometric observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhancement of X-ray performance with new GEC charged coupled devices (CCD)

Samples of two GEC charge coupled devices with enhanced X-ray performance have been tested. The P8607, fabricated with reduced linear dimensions, gives the lowest detector noise reported for Fe-55 with a CCD. The deep depletion device P8600-HR gives the best combination of energy resolution and quantum efficiency at 6 keV. The energy resolution vs quantum efficiency trade-off curve are discussed.

Schwartz, D. A.↗

Comparison of the Results of MISSE 6 Atomic Oxygen Erosion Yields of Layered Kapton H Films with Monte Carlo Computational Predictions

A space experiment flown as part of the Materials International Space Station Experiment 6B (MISSE 6B) was designed to compare the atomic oxygen erosion yield (Ey) of layers of Kapton H polyimide with no spacers between layers with that of layers of Kapton H with spacers between layers. The results were compared to a solid Kapton H (DuPont, Wilmington, DE) sample. Monte Carlo computational modeling was performed to optimize atomic oxygen interaction parameter values to match the results of both the MISSE 6B multilayer experiment and the undercut erosion profile from a crack defect in an aluminized Kapton H sample flown on the Long Duration Exposure Facility (LDEF). The Monte Carlo modeling produced credible agreement with space results of increased Ey for all samples with spacers as well as predicting the space-observed enhancement in erosion near the edges of samples due to scattering from the beveled edges of the sample holders.

Oxygen atoms↗

Characteristic Performance Evaluation of a new SAGe Well Detector for Small and Large Sample Geometries

Environmental scientific research requires a detector that has sensitivity low enough to reveal the presence of any contaminant in the sample at a reasonable counting time. Canberra developed the germanium detector geometry called Small Anode Germanium (SAGe) Well detector, which is now available commercially. The SAGe Well detector is a new type of low capacitance germanium well detector manufactured using small anode technology capable of advancing many environmental scientific research applications. The performance of this detector has been evaluated for a range of sample sizes and geometries counted inside the well, and on the end cap of the detector. The detector has energy resolution performance similar to semi-planar detectors, and offers significant improvement over the existing coaxial and Well detectors. Energy resolution performance of 750 eV Full Width at Half Maximum (FWHM) at 122 keV γ-ray energy and resolution of 2.0 - 2.3 keV FWHM at 1332 keV γ-ray energy are guaranteed for detector volumes up to 425 cm{sup 3}. The SAGe Well detector offers an optional 28 mm well diameter with the same energy resolution as the standard 16 mm well. Such outstanding resolution performance will benefit environmental applications in revealing the detailed radionuclide content of samples, particularly at low energy, and will enhance the detection sensitivity resulting in reduced counting time. The detector is compatible with electric coolers without any sacrifice in performance and supports the Canberra Mathematical efficiency calibration method (In situ Object Calibration Software or ISOCS, and Laboratory Source-less Calibration Software or LABSOCS). In addition, the SAGe Well detector supports true coincidence summing available in the ISOCS/LABSOCS framework. The improved resolution performance greatly enhances detection sensitivity of this new detector for a range of sample sizes and geometries counted inside the well. This results in lower minimum detectable concentrations compared to Traditional Well detectors. The SAGe Well detectors are compatible with Marinelli beakers and compete very well with semi-planar and coaxial detectors for large samples in many applications. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural, optical and thermal properties of glass and anti-glass phases in strontium tellurite and borotellurite systems doped with europium

Highlights: • Optical, thermal and structural properties of SrO-TeO{sub 2} and SrO-B{sub 2}O{sub 3}-TeO{sub 2} glasses containing Eu{sup 3+}. • Co-existing glass and SrTe{sub 5}O{sub 11} anti-glass inclusions in 10SrO-90TeO{sub 2} sample. • Rectangular, triangular, spherical and flower shaped inclusions in the samples. • 1-mol% Eu{sub 2}O{sub 3} modifies the shape and size of the inclusions. • B{sub 2}O{sub 3} suppresses the growth of anti-glass inclusions and enhances Eu{sup 3+} fluorescence. - Abstract: Glass sample of the composition: 10SrO-90TeO{sub 2} was prepared by melt-quenching technique and found to contain triangular, rectangular, and spherical shaped micro-inclusions of the average size ∼803 μm in the glassy matrix. The inclusions grow to an average size of ∼1347 μm and assume flower-like morphology upon adding 1 mol% Eu{sub 2}O{sub 3} in the 10SrO-90TeO{sub 2} sample. X-ray diffraction studies showed that the micro-inclusions exhibit sharp peaks, but their Raman spectra have broad phonon bands that are indistinguishable or very similar to that of the glassy matrix phase. The addition of 10 mol% B{sub 2}O{sub 3} in the samples inhibits the growth of inclusions of anti-glass phases and forms purely amorphous samples. B{sub 2}O{sub 3} significantly enhances the photoluminescence properties of Eu{sup 3+} doped samples. Furthermore, B{sub 2}O{sub 3} converts the four-fold co-ordinated Te-O structural units into three-fold co-ordinated Te-O units.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ni Nanoparticle-Added Ni{sub x}/(Cu{sub 0.5}Tl{sub 0.5})Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10-δ} Superconductor Composites and Their Enhanced Flux Pinning Characteristics

Ni nanoparticle-added Ni{sub x}/(Cu{sub 0.5}Tl{sub 0.5})Ba{sub 2}Ca{sub 2} Cu{sub 3}O{sub 10-δ} superconductor composites are synthesized at normal pressure by two-step solid-state reaction method. The idea for adding ferromagnetic nanoparticles was to create artificial pinning centers at grain boundaries. The samples have shown orthorhombic crystal structure in which the cell parameters increase with an increase in the added concentration of Ni nanoparticles. This shows that due to the higher reactivity, Ni nanoparticles partially diffuse into the unit cell of (Cu{sub 0.5}Tl{sub 0.5})Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10-δ} superconductors. This also indicates as an evidence of the occupancy of these nanoparticles at grain boundaries. A metallic variation of resistivity from room temperature down to the onset of superconductivity is a typical feature of these samples with T{sub c}(R = 0) varying between 92 and 94 K. The magnitude of diamagnetism is significantly enhanced in 7 and 10% nanoparticle-added samples. The enhanced magnetization of ferromagnetic nanoparticles at reduced temperature plays a vital role in reducing the diamagnetism of nanosuperconductor composites. The softening of apical oxygen modes of type Cu(1)–O{sub A}–Cu(2) has confirmed the diffusion of Ni nanoparticles into the unit cell of the final compound. The excess conductivity analyses of conductivity data have shown that the values of B{sub c}(0), B{sub c1}, and J{sub c} are enhanced with the addition of Ni nanoparticles in the final compound. Variation of superconducting properties was attributed to pair breaking due to spin scattering across these ferromagnetic Ni nanoparticles. This shows that added Ni nanoparticles act as efficient pinning centers, which is also confirmed by the suppression of the London penetration depth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Robust frequency diversity based algorithm for clutter noise reduction of ultrasonic signals using multiple sub-spectrum phase coherence

This paper presents a robust frequency diversity based algorithm for clutter reduction in ultrasonic A-scan waveforms. The performance of conventional spectral-temporal techniques like Split Spectrum Processing (SSP) is highly dependent on the parameter selection, especially when the signal to noise ratio (SNR) is low. Although spatial beamforming offers noise reduction with less sensitivity to parameter variation, phased array techniques are not always available. The proposed algorithm first selects an ascending series of frequency bands. A signal is reconstructed for each selected band in which a defect is present when all frequency components are in uniform sign. Combining all reconstructed signals through averaging gives a probability profile of potential defect position. To facilitate data collection and validate the proposed algorithm, Full Matrix Capture is applied on the austenitic steel and high nickel alloy (HNA) samples with 5MHz transducer arrays. When processing A-scan signals with unrefined parameters, the proposed algorithm enhances SNR by 20dB for both samples and consequently, defects are more visible in B-scan images created from the large amount of A-scan traces. Importantly, the proposed algorithm is considered robust, while SSP is shown to fail on the austenitic steel data and achieves less SNR enhancement on the HNA data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Decoration of the layered manganese oxide birnessite with Mn( II / III ) gives a new water oxidation catalyst with fifty-fold turnover number enhancement

The role of the manganese average oxidation state (AOS) in water oxidation catalysis by birnessite was investigated. In this work, low AOS samples were most active, generating O 2 immediately. Samples with a relatively high AOS showed an initial induction period and decreased turnover. Mn( II - and III ) -enriched samples gave a 10–50 fold enhancement in turnover number.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interacting galaxies in the IllustrisTNG simulations - I: Triggered star formation in a cosmological context

ABSTRACT We use the IllustrisTNG cosmological hydrodynamical simulations to investigate how the specific star formation rates (sSFRs) of massive galaxies (M* > 1010 M⊙) depend on the distance to their closest companions. We estimate sSFR enhancements by comparing with control samples that are matched in redshift, stellar mass, local density, and isolation, and we restrict our analysis to pairs with stellar mass ratios of 0.1 to 10. At small separations (∼15 kpc), the mean sSFR is enhanced by a factor of 2.0 ± 0.1 in the flagship (110.7 Mpc)3 simulation (TNG100-1). Statistically significant enhancements extend out to 3D separations of 280 kpc in the (302.6 Mpc)3 simulation (TNG300-1). We find similar trends in the EAGLE and Illustris simulations, although their sSFR enhancements are lower than those in TNG100-1 by about a factor of two. Enhancements in IllustrisTNG galaxies are seen throughout the redshift range explored (0 ≤ $z$ < 1), with the strength of the enhancements decreasing with increasing redshift for galaxies with close companions. In order to more closely compare with observational results, we separately consider 2D projected distances between galaxies in IllustrisTNG. We detect significant sSFR enhancements out to projected separations of 260 kpc in TNG300-1, with projection effects diluting the size of the enhancements by about 20 per cent below 50 kpc. We find similar sSFR enhancements in TNG100-1 and Sloan Digital Sky Survey galaxies, with enhancements extending out to projected separations of about 150 kpc for star-forming galaxies at $z$ < 0.2. Finally, by summing over all separations, we estimate that the presence of closest companions boosts the average sSFR of massive galaxies in TNG100-1 by 14.5 per cent.

Patton, David R.↗

macroMS: Image-Guided Analysis of Random Objects by Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry

Mass spectrometry imaging is well-suited to characterizing sample surfaces for their chemical content in a spatially resolved manner. However, when the surface contains small objects with significant empty spaces between them, more efficient approaches to sample acquisition are possible. Image-guided mass spectrometry (MS) enables high-throughput analysis of a diverse range of sample types, such as microbial colonies, liquid microdroplets, and others, by recognizing and analyzing selected location targets in an image. Here, we describe an imaging protocol and macroMS, an online software suite that can be used to enhance MS measurements of macroscopic samples that are imaged by a camera or a flatbed scanner. Furthermore, the web-based tool enables users to find and filter targets from the optical images, correct optical distortion issues for improved spatial location of selected targets, input the custom geometry files into an MS device to acquire spectra at the selected locations, and finally, perform limited data analysis and use visualization tools to aid locating samples containing compounds of interest. Using the macroMS suite, an enzyme mutant library of Saccharomyces cerevisiae and nL droplet arrays of Escherichia coli and Pseudomonas fluorescens have been assayed at a rate of ~2 s/sample.

47 OTHER INSTRUMENTATION↗

Evidence for a conducting surface ground state in high-quality single crystalline FeSi

Significance The compound FeSi has been the focus of intense research efforts due to its unusual electrical, magnetic, and lattice properties, which are not well understood. This study reveals a semiconducting-to-metallic cross-over with decreasing temperature at ∼ 19 K, which is not accompanied by any bulk features, in single-crystal samples of FeSi. The low-temperature metallic behavior can be significantly enhanced by reducing the width/thickness of the sample. Application of an external magnetic field easily suppresses the electrical resistivity at low temperatures, but does not have a noticeable effect on the temperature below which metallic conduction occurs. Evidence for a conducting surface state on FeSi similar to the surface state on a topological insulator is presented.

36 MATERIALS SCIENCE↗

The Profiled Feldman-Cousins Method for Confidence Interval Construction for the Nova 3-Flavor Oscillation Analysis

The small interaction cross-section of neutrinos makes experimental neutrino physics particularly responsive to technological advancements. A significant development leveraged by the NOvA experiment is large-scale parallel processing, enabling novel computational approaches to longstanding experimental challenges. Central to managing the resulting high-throughput data is NOvA’s implementation of the Freight Train model, designed for efficient data production and handling.This dissertation details the methodology and execution of the NOvA 2024 3-Flavor Oscillation Analysis, supported by a comprehensive dataset spanning ten years. It emphasizes frequentist results refined through the Feldman-Cousins (FC) technique, specifically addressing confidence interval corrections in parameter estimation. The computational intensity associated with Feldman-Cousins arises from extensive Monte Carlo simulations, which were substantially mitigated through parallel computing on the Perlmutter supercomputer at the National Energy Research Scientific Computing Center (NERSC), employing the MPI framework.To further enhance computational efficiency, an Importance Sampling method is introduced and evaluated, demonstrating significant potential to reduce complexity, particularly in exploring extreme parameter space regions. This thesis presents both the successful application of advanced computational resources and the development of sophisticated statistical techniques, aiming to enhance the precision and scope of neutrino oscillation analyses.

Dye ajdye11190@gmail.com, Andrew Joseph [Mississip↗

Engineered pinning landscapes for enhanced 2G coil wire

We demonstrate a twofold increase in the in-field critical current of AMSC's standard 2G coil wire by irradiation with 18-MeV Au ions. The optimum pinning enhancement is achieved with a dose of 6 × 10 11 Au ions/cm 2 . Although the 77 K, self-field critical current is reduced by about 35%, the in-field critical current (H//c) shows a significant enhancement between 4 and 50 K in fields > 1 T. The process was used for the roll-to-roll irradiation of AMSC's standard 46-mm-wide production coated conductor strips, which were further processed into standard copper laminated coil wire. The long-length wires show the same enhancement as attained with short static irradiated samples. The roll-to-roll irradiation process can be incorporated in the standard 2G wire manufacturing, with no modifications to the current process. In conclusion, the enhanced performance of the wire will benefit rotating machine and magnet applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tip-Enhanced Multipolar Raman Scattering

We record nanoscale chemical images of thiobenzonitrile (TBN)-functionalized plasmonic gold nanocubes via tip-enhanced Raman spectroscopy (TERS). The spatially averaged optical response is dominated by conventional (dipolar) TERS scattering from TBN but also contains weaker spectral signatures in the 1225-1500 cm-1 region. The weak optical signatures dominate some of the recorded single pixel spectra. We can uniquely assign these Raman forbidden transitions to multipolar Raman scattering, which implicates spatially varying enhanced electric field gradients at plasmonic tip-sample nanojunctions. Specifically, we can assign observations of tip-enhanced electric dipole-magnetic dipole as well as electric dipole-electric quadrupole driven transitions. These signals need to be understood and accounted for in the interpretation of TERS spectral images, particularly in on-going quests aimed at chemical reaction mapping via TERS.

Wang, Chih-Feng↗

Pericentric passage-driven star formation in satellite galaxies and their hosts: CLUES from local group simulations

Local Group satellite galaxies show a wide diversity of star formation histories (SFHs) whose origin is yet to be fully understood. Using hydrodynamical simulations from the Constrained Local UniversE project, we study the SFHs of satellites of Milky Way-like galaxies in a cosmological context: while in the majority of the cases the accretion on to their host galaxy causes the satellites to lose their gas, with a subsequent suppression in SF, in about 25 per cent of our sample we observe a clear enhancement of SF after infall. Peaks in SF clearly correlate with the satellite pericentric passage around its host and, in one case, with a satellite–satellite interaction. We identify two key ingredients that result in enhanced SF after infall: galaxies must enter the host’s virial radius with a reservoir of cold gas M gas , inf/M vir , inf ≳ 10 -2 and with a minimum pericentric distance ≳10 kpc (mean distance ~50 kpc for the full sample), in order to form new stars due to compression of cold gas at pericentric passage. On the other hand, satellites that infall with little gas or whose pericentric distance is too small, have their gas ram-pressure stripped and subsequent SF quenched. The pericentric passage of satellites likewise correlates with SF peaks in their hosts, suggesting that this mechanism induces bursts of SF in satellites and central galaxies alike, in agreement with recent studies of our Galaxy’s SFH. Our research findings can explain the recently reported multiple stellar populations observed in dwarf galaxies such as Carina and Fornax, and should be taken into account in semi-analytic models of galaxy formation and satellite quenching.

79 ASTRONOMY AND ASTROPHYSICS↗