Search NASA⌕ Search

SEARCH · Search NASA

Results for “Forest Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Model Effects on GLAS-Based Regional Estimates of Forest Biomass and Carbon

ICESat/GLAS waveform data are used to estimate biomass and carbon on a 1.27 million sq km study area. the Province of Quebec, Canada, below treeline. The same input data sets and sampling design are used in conjunction with four different predictive models to estimate total aboveground dry forest biomass and forest carbon. The four models include nonstratified and stratified versions of a multiple linear model where either biomass or (square root of) biomass serves as the dependent variable. The use of different models in Quebec introduces differences in Provincial biomass estimates of up to 0.35 Gt (range 4.942+/-0.28 Gt to 5.29+/-0.36 Gt). The results suggest that if different predictive models are used to estimate regional carbon stocks in different epochs, e.g., y2005, y2015, one might mistakenly infer an apparent aboveground carbon "change" of, in this case, 0.18 Gt, or approximately 7% of the aboveground carbon in Quebec, due solely to the use of different predictive models. These findings argue for model consistency in future, LiDAR-based carbon monitoring programs. Regional biomass estimates from the four GLAS models are compared to ground estimates derived from an extensive network of 16,814 ground plots located in southern Quebec. Stratified models proved to be more accurate and precise than either of the two nonstratified models tested.

Nelson, Ross↗
DOE OSTI2017

Nest survival modelling using a multi‐species approach in forests managed for timber and biofuel feedstock

Abstract Switchgrass ( Panicum virgatum ) intercropping is a novel forest management practice for biomass production intended to generate cellulosic feedstocks within intensively managed loblolly pine‐dominated landscapes. These pine plantations are important for early‐successional bird species, as short rotation times continually maintain early‐successional habitat. We tested the efficacy of using community models compared to individual surrogate species models in understanding influences on nest survival. We analysed nest data to test for differences in habitat use for 14 bird species in plots managed for switchgrass intercropping and controls within loblolly pine ( Pinus taeda ) plantations in Mississippi, USA. We adapted hierarchical models using hyper‐parameters to incorporate information from both common and rare species to understand community‐level nest survival. This approach incorporates rare species that are often discarded due to low sample sizes, but can inform community‐level demographic parameter estimates. We illustrate use of this approach in generating both species‐level and community‐wide estimates of daily survival rates for songbird nests. We were able to include rare species with low sample size (minimum n = 5) to inform a hyper‐prior, allowing us to estimate effects of covariates on daily survival at the community level, then compare this with a single‐species approach using surrogate species. Using single‐species models, we were unable to generate estimates below a sample size of 21 nests per species. Community model species‐level survival and parameter estimates were similar to those generated by five single‐species models, with improved precision in community model parameters. Covariates of nest placement indicated that switchgrass at the nest site (<4 m) reduced daily nest survival, although intercropping at the forest stand level increased daily nest survival. Synthesis and applications . Community models represent a viable method for estimating community nest survival rates and effects of covariates while incorporating limited data for rarely detected species. Intercropping switchgrass in loblolly pine plantations slightly increased daily nest survival at the research plot scale (0.1 km 2 ), although at a local scale (50 m 2 ) switchgrass negatively influenced nest survival. A likely explanation is intercropping shifted community composition, favouring species with greater disturbance tolerance.

Loman, Zachary G.↗
DOE OSTI2019

Understanding the Response of Photosynthetic Metabolism in Tropical Forests to Seasonal Climate Variations

We propose a study focused on the basic question: What controls the response of photosynthesis in Amazonian forests to seasonal variations in climate? This question, despite its apparent simplicity, remains difficult for modern earth system models to answer, and is also the subject of continuing controversy in the remote-sensing literature. For example, in the modeling arena, four cutting-edge earth system models (ESM’s) show significant divergence in their seasonal patterns of photosynthesis from observed whole-system photosynthetic fluxes at two sites in the central Amazon. The overall objective of the project is to guide improvements in earth system models of tropical forest photosynthesis by collecting and integrating a suite of observations to 1) test several hypotheses (three core, conceptual hypotheses for explaining observed photosynthetic seasonality and a methodological hypotheses for scaling from leaves to canopy with hyperspectral cameras), and 2) perform a synthesis activity that applies our empirical work to earth system models of terrestrial carbon cycling. The project will provide an extensive suite of new and unique datasets that enable us to fill, through advanced modeling techniques and analysis, critical knowledge gaps in current understanding of what controls the response of canopy photosynthesis and related functions in Amazonian forests to seasonal variation in climate. Three major types of datasets and data products will be delivered: (1) in situ leaf and tree-scale measurements from intensive ecophysiological and ecohydological field campaigns, (2) time-series observations of leaf-to-crown scale forest reflectance properties and atmospheric radiation from two innovative, ground-based imaging sensors (respectively, the Hyperspectral Vegetation Imaging System and the High Dynamic Range All-Sky Imaging System), and (3) results from state-of-the-art models of 3-dimensional canopy processes for radiative transfer and photosynthesis that integrate and link our observations to tropical forest processes. These data products and the improved knowledge we achieve with them will contribute to testing and improving the treatment of tropical forest processes in ESMs. They will contribute data to and leverage related data from of the GOAmazon campaign, and make significant contributions to support the overall goals of GOAmazon. This work will also help establish a foundation for the Next Generation Ecosystem Experiments (NGEE) in the Tropics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Moderate forest disturbance as a stringent test for gap and big-leaf models

Disturbance-induced tree mortality is a key factor regulating the carbon balance of a forest, but tree mortality and its subsequent effects are poorly represented processes in terrestrial ecosystem models. It is thus unclear whether models can robustly simulate moderate (non-catastrophic) disturbances, which tend to increase biological and structural complexity and are increasingly common in aging US forests. We tested whether three forest ecosystem models – Biome-BGC (BioGeochemical Cycles), a classic big-leaf model, and the ZELIG and ED (Ecosystem Demography) gap-oriented models – could reproduce the resilience to moderate disturbance observed in an experimentally manipulated forest (the Forest Accelerated Succession Experiment in northern Michigan, USA, in which 38% of canopy dominants were stem girdled and compared to control plots). Each model was parameterized, spun up, and disturbed following similar protocols and run for 5 years post-disturbance. The models replicated observed declines in aboveground biomass well. Biome-BGC captured the timing and rebound of observed leaf area index (LAI), while ZELIG and ED correctly estimated the magnitude of LAI decline. None of the models fully captured the observed post-disturbance C fluxes, in particular gross primary production or net primary production (NPP). Biome-BGC NPP was correctly resilient but for the wrong reasons, and could not match the absolute observational values. ZELIG and ED, in contrast, exhibited large, unobserved drops in NPP and net ecosystem production. The biological mechanisms proposed to explain the observed rapid resilience of the C cycle are typically not incorporated by these or other models. It is thus an open question whether most ecosystem models will simulate correctly the gradual and less extensive tree mortality characteristic of moderate disturbances.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1993

(abstract) Monitoring Seasonal State and Mapping Species in Alaskan Taiga Using Imaging Radar as Input to CO(sub 2) Flux Models

Changes in the seasonal CO(sub 2) flux of the boreal forests may result from increased atmospheric CO(sub 2) concentrations and associated atmospheric warming. To monitor this potential change, a combination of remote sensing information and ecophysiological models are required. In this paper we address the use of synthetic aperture radar (SAR) data to provide some of the input to the ecophysiological models: forest type, freeze/thaw state which limits the growing season for conifers, and leaf on/off state which limits the growing season for deciduous species. AIRSAR data collected in March 1988 during an early thaw event and May 1991 during spring breakup are used to generate species maps and to determine the sensitivity of SAR to canopy freeze/thaw transitions. These data are also used to validate a microwave scattering model which is then used to determine the sensitivity of SAR to leaf on/off and soil freeze/thaw transitions. Finally, a CO(sub 2) flux algorithm which utilizes SAR data and an ecophysiological model to estimate CO(sub 2) flux is presented. CO(sub 2) flux maps are generated from which areal estimates of CO(sub 2) flux are derived.

leaf cover boreal forests radar backscatter↗
NASA NTRS2016

Calibration and Validation of Landsat Tree Cover in the Taiga-Tundra Ecotone

Monitoring current forest characteristics in the taiga-tundra ecotone (TTE) at multiple scales is critical for understanding its vulnerability to structural changes. A 30 m spatial resolution Landsat-based tree canopy cover map has been calibrated and validated in the TTE with reference tree cover data from airborne LiDAR and high resolution spaceborne images across the full range of boreal forest tree cover. This domain-specific calibration model used estimates of forest height to determine reference forest cover that best matched Landsat estimates. The model removed the systematic under-estimation of tree canopy cover greater than 80% and indicated that Landsat estimates of tree canopy cover more closely matched canopies at least 2 m in height rather than 5 m. The validation improved estimates of uncertainty in tree canopy cover in discontinuous TTE forests for three temporal epochs (2000, 2005, and 2010) by reducing systematic errors, leading to increases in tree canopy cover uncertainty. Average pixel-level uncertainties in tree canopy cover were 29.0%, 27.1% and 31.1% for the 2000, 2005 and 2010 epochs, respectively. Maps from these calibrated data improve the uncertainty associated with Landsat tree canopy cover estimates in the discontinuous forests of the circumpolar TTE.

Montesano, Paul Mannix↗
DOE OSTI2025

Flood Susceptibility Mapping Using Machine Learning and Geospatial-Sentinel-1 SAR Integration for Enhanced Early Warning Systems

This study presents a comprehensive framework for flood susceptibility mapping by integrating geospatial factors with both statistical and machine learning models. Thirteen Flood-related factors, including DEM, slope, TWI, NDVI, etc., are extracted as features of models, and historical flood data derived from Sentinel-1 SAR from 2018 to 2023 are used as the target variables of the models. These datasets are analyzed using a frequency-based statistical model and three machine learning models, including Random Forest, XGBoost, and CNN, to generate flood susceptibility maps. The performance of each model is evaluated through AUC; and SHAP scores are separately generated for Machine learning (ML) models to explain each feature contribution in the ML model. The generated susceptibility maps are validated by high-flood-risk locations monitored by flood sensors, BLE inundation models, and flood-prone areas suggested by the Local Community Task Force. The results indicate that the XGBoost model outperforms all other models, with an AUC of 0.92 and demonstrates the highest alignment with recommended high-flood-risk locations, while the frequency-based statistical model showed the weakest performance with an AUC of 0.65. SHAP value graphs highlight the elevation, slope, and TWI as the most influential features across all models. The susceptibility maps generated by the machine learning model show strong agreement with the BLE map and high-flood-risk areas identified by the local Community Task Force.

Google Engine↗
NASA NTRS2010

Model Effects on GLAS-Based Regional Estimates of Forest Biomass and Carbon

Ice, Cloud, and land Elevation Satellite (ICESat) / Geosciences Laser Altimeter System (GLAS) waveform data are used to estimate biomass and carbon on a 1.27 X 10(exp 6) square km study area in the Province of Quebec, Canada, below the tree line. The same input datasets and sampling design are used in conjunction with four different predictive models to estimate total aboveground dry forest biomass and forest carbon. The four models include non-stratified and stratified versions of a multiple linear model where either biomass or (biomass)(exp 0.5) serves as the dependent variable. The use of different models in Quebec introduces differences in Provincial dry biomass estimates of up to 0.35 G, with a range of 4.94 +/- 0.28 Gt to 5.29 +/-0.36 Gt. The differences among model estimates are statistically non-significant, however, and the results demonstrate the degree to which carbon estimates vary strictly as a function of the model used to estimate regional biomass. Results also indicate that GLAS measurements become problematic with respect to height and biomass retrievals in the boreal forest when biomass values fall below 20 t/ha and when GLAS 75th percentile heights fall below 7 m.

Nelson, Ross F.↗
DOE OSTI2022

Divergent responses of soil microorganisms to throughfall exclusion across tropical forest soils driven by soil fertility and climate history

Model projections predict tropical forests will experience longer periods of drought and more intense precipitation cycles under a changing climate. Such transitions have implications for structure-function relationships within microbial communities. We examine how throughfall exclusion might reshape prokaryotic and fungal communities across four lowland forests in Panama with a wide variation in mean annual precipitation and soil fertility. Four sites were established across a 1000 mm span in Mean Annual Precipitation (MAP: 2335–3421 mm). We expected microbial communities at sites with lower MAP to be less sensitive to throughfall exclusion than sites with higher MAP and fungal communities to be more resistant to disturbance than prokaryotes. At each location, partial throughfall exclusion structures were established over 10 × 10 m plots to reduce direct precipitation input. After short-term (~3–9 months) throughfall exclusion, prokaryotic communities showed no change in composition. However, prolonged (12–18 months) throughfall exclusion resulted in divergent prokaryotic community responses, reflecting MAP and soil fertility. We observed the emergence of a “drought microbiome” within infertile sites, whereby the community structure of the experimental throughfall exclusion plots at the lower MAP sites diverged from their respective control sites and converged towards overlapping assemblages. Furthermore, under throughfall exclusion, taxa increasing in relative abundance at the wettest site reflected that endemic to control plots at the lowest MAP site, suggesting a shift toward communities with lifehistory traits selected for under a lower MAP. By contrast, fungal community composition across sites was resilient to throughfall exclusion; however, biomass diverged in response to throughfall exclusion, increasing at two sites while decreasing in the other two. Broadly, our results suggest that microbial communities’ sensitivity to frequent drying and rewetting periods in tropical forest soils will depend on climate history and soil fertility, with infertile sites likely to respond readily to changes in precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Chemical composition based machine learning model to predict defect formation in additive manufacturing

With a goal of exploiting additive manufacturing to improve the manufacturing of existing reactor materials, we developed a chemical composition-based machine learning model to predict the printability of any given alloy in laser powder bed fusion (L-PBF) using experimental data from peer-reviewed literature. We defined printability as the ability to avoid defects like cracking, balling, porosity, and lack of fusion, that are caused by thermal stresses (during solidification or liquation), molten pool disintegration into disconnected small beads or lack of heat input respectively. Our models predict the tendency of balling defect formation and porosity percentage for a given composition, under a given set of processing conditions. To predict the likelihood of balling defect, three models: a random forest classifier, a gradient boost regressor and a neural network were trained on a dataset containing both traditional alloys and high entropy alloys. The neural network model showed the highest accuracy of 92.3 % in predicting the balling defect formation. A random forest regressor, gradient boost regressor and neural network were trained and tested on a dataset of various alloys to predict porosity. The random forest regressor showed the best predictions with an R 2 score of 0.97. The models also revealed the relative importance of the input descriptors on defect-formation tendency. Of particular significance was the identification of carbon as an important element in determining the occurrence of balling and percent porosity in alloys like steel, as well as being moderately important to the percentage porosity in other alloys as well as steel. Manganese was also identified as a key descriptor for the percentage of porosity in steel and other alloys. Manganese’s low thermal conductivity and consistent presence in the dataset is the likely cause for its contribution. Carbon’s role is attributable to its relatively high specific heat and high melting temperature. In conclusion, our model serves as a swift, chemistry-based tool to design experiments and find modified compositions better suited for additive manufacturing.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Basic studies in microwave remote sensing

Scattering models were developed in support of microwave remote sensing of earth terrains with particular emphasis on model applications to airborne Synthetic Aperture Radar measurements of forest. Practically useful surface scattering models based on a solution of a pair of integral equations including multiple scattering effects were developed. Comparisons of these models with controlled scattering measurements from statistically known random surfaces indicate that they are valid over a wide range of frequencies. Scattering models treating a forest environment as a two and three layered media were also developed. Extensive testing and comparisons were carried out with the two layered model. Further studies with the three layered model are being carried out. A volume scattering model valid for dense media such as a snow layer was also developed that shows the appropriate trend dependence with the volume fraction of scatterers.

Fung, Adrian K.↗
DOE OSTI2020

The importance of round-robin validation when assessing machine-learning-based vertical extrapolation of wind speeds

The extrapolation of wind speeds measured at a meteorological mast to wind turbine rotor heights is a key component in a bankable wind farm energy assessment and a significant source of uncertainty. Industry-standard methods for extrapolation include the power-law and logarithmic profiles. The emergence of machine-learning applications in wind energy has led to several studies demonstrating substantial improvements in vertical extrapolation accuracy in machine-learning methods over these conventional power-law and logarithmic profile methods. In all cases, these studies assess relative model performance at a measurement site where, critically, the machine-learning algorithm requires knowledge of the rotor-height wind speeds in order to train the model. This prior knowledge provides fundamental advantages to the site-specific machine-learning model over the power-law and log profiles, which, by contrast, are not highly tuned to rotor-height measurements but rather can generalize to any site. Furthermore, there is no practical benefit in applying a machine-learning model at a site where winds at the heights relevant for wind energy production are known; rather, its performance at nearby locations (i.e., across a wind farm site) without rotor-height measurements is of most practical interest. To more fairly and practically compare machine-learning-based extrapolation to standard approaches, we implemented a round-robin extrapolation model comparison, in which a random-forest machine-learning model is trained and evaluated at different sites and then compared against the power-law and logarithmic profiles. We consider 20 months of lidar and sonic anemometer data collected at four sites between 50 and 100 km apart in the central United States. We find that the random forest outperforms the standard extrapolation approaches, especially when incorporating surface measurements as inputs to include the influence of atmospheric stability. When compared at a single site (the traditional comparison approach), the machine-learning improvement in mean absolute error was 28 % and 23 % over the power-law and logarithmic profiles, respectively. Using the round-robin approach proposed here, this improvement drops to 20 % and 14 %, respectively. These latter values better represent practical model performance, and we conclude that round-robin validation should be the standard for machine-learning-based wind speed extrapolation methods.

17 WIND ENERGY↗
DOE OSTI2024

Impacts of Forest Management-Induced Productivity Changes on Future Land Use and Land Cover Change

Anthropogenic land use and land cover change (LULCC) is projected to continue in the future. However, the influence of forest management on forest productivity change and subsequent LULCC projections remains under-investigated. This study explored the impacts of forest management-induced change in forest productivity on LULCC throughout the 21st century. Specifically, we developed a framework to softly couple the Global Change Analysis Model and Global Timber Model to consider forest management-induced forest productivity change and projected future LULCC across the five Shared Socioeconomic Pathways (SSPs). We found future increases in forest management intensity overall drive the increase of forest productivity. The forest management-induced forest productivity change shows diverse responses across all SSPs, with a global increase from 2015 to 2100 ranging from 3.9% (SSP3) to 8.8% (SSP1). This further leads to an overall decrease in the total area with a change of land use types, with the largest decrease under SSP1 (-7.5%) and the smallest decrease under SSP3 (-0.7%) in 2100. Among land use types, considering forest management-induced change significantly reduces the expansion of managed forest and also reduces the loss of natural land in 2100 across SSPs. This suggests that ignoring forest management-induced forest productivity change underestimates the efficiency of wood production, overestimates the managed forest expansion required to meet the future demand, and consequently, potentially introduces uncertainties into relevant analyses, for example, carbon cycle and biodiversity. Thus, we advocate to better account for the impacts of forest management in future LULCC projections.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Informing models through empirical relationships between foliar phosphorus, nitrogen and photosynthesis across diverse woody species in tropical forests of Panama

Here, our objective was to analyze and summarize data describing photosynthetic parameters and foliar nutrient concentrations from tropical forests in Panama to inform model representation of phosphorus (P) limitation of tropical forest productivity. Gas exchange and nutrient content data were collected from 144 observations of upper canopy leaves from at least 65 species at two forest sites in Panama, differing in species composition, rainfall and soil fertility. Photosynthetic parameters were derived from analysis of assimilation rate vs internal CO 2 concentration curves ( A/C i ), and relationships with foliar nitrogen (N) and P content were developed. The relationships between area-based photosynthetic parameters and nutrients were of similar strength for N and P and robust across diverse species and site conditions. The strongest relationship expressed maximum electron transport rate (J max ) as a multivariate function of both N and P, and this relationship was improved with the inclusion of independent data on wood density. Models that estimate photosynthesis from foliar N would be improved only modestly by including additional data on foliar P, but doing so may increase the capability of models to predict future conditions in P-limited tropical forests, especially when combined with data on edaphic conditions and other environmental drivers.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2020

Structure and Parameter Uncertainty in Centennial Projections of Forest Community Structure and Carbon Cycling

Secondary forest regrowth shapes community succession and biogeochemistry for decades, including in the Upper Great Lakes region. Vegetation models encapsulate our understanding of forest function, and whether models can reproduce multi‐decadal succession patterns is an indication of our ability to predict forest responses to future change. We test the ability of a vegetation model to simulate C cycling and community composition during 100 years of forest regrowth following stand‐replacing disturbance, asking (a) Which processes and parameters are most important to accurately model Upper Midwest forest succession? (b) What is the relative importance of model structure versus parameter values to these predictions? We ran ensembles of the Ecosystem Demography model v2.2 with different representations of processes important to competition for light. We compared the magnitude of structural and parameter uncertainty and assessed which sub‐model–parameter combinations best reproduced observed C fluxes and community composition. On average, our simulations underestimated observed net primary productivity (NPP) and leaf area index (LAI) after 100 years and predicted complete dominance by a single plant functional type (PFT). Out of 4,000 simulations, only nine fell within the observed range of both NPP and LAI, but these predicted unrealistically complete dominance by either early hardwood or pine PFTs. A different set of seven simulations were ecologically plausible but under‐predicted observed NPP and LAI. Parameter uncertainty was large; NPP and LAI ranged from ~0% to >200% of their mean value, and any PFT could become dominant. The two parameters that contributed most to uncertainty in predicted NPP were plant–soil water conductance and growth respiration, both unobservable empirical coefficients. We conclude that (a) parameter uncertainty is more important than structural uncertainty, at least for ED‐2.2 in Upper Midwest forests and (b) simulating both productivity and plant community composition accurately without physically unrealistic parameters remains challenging for demographic vegetation models.

canopy radiative transfer↗
NASA NTRS2018

Modeling the Interactive Effects of Spruce Beetle Infestation and Climate on Subalpine Vegetation

In the subalpine zone of the Rocky Mountains, climate change is predicted to result in an increase in the frequency and severity of spruce beetle outbreaks. Climate change itself may affect vegetation, potentially leading to changes in species composition. The direct and indirect effects of climate and disturbances on forest composition, biomass, and dynamics open the possibility for non-linear ecosystem responses. Modeling studies allow for the study of the interaction of these effects and their impact on the forest system. University of Virginia Forest Model Enhanced (UVAFME), an individual-based gap model that simulates forest dynamics and characteristics, is updated with a spruce beetle subroutine that calculates the probability for beetle infestation and potential mortalityof each tree on a plot. The updated model is then run with multiple scenarios that combine beetle infestation with current or altered climate at sites across the southern Rocky Mountains. Results show that spruce beetle infestations acted to facilitate competition with invading lower-elevation species, resulting in an increase in the biomass of historically lower elevation species and a further decline in Engelmann spruce biomass than occurred with solely bark beetle disturbance or solely climate change. We also found an initial enhancing effect between spruce beetle infestation and climate change; however, by the end of 100 yr of climate change and potential beetle infestation, climate had a dampening effect on spruce beetle infestation, through loss of host trees. These results are an important step in understanding the possible futures for vegetation of the Rocky Mountains as well as for spruce forests across the western United States and Canada.

Foster, Adrianna C.↗
NASA NTRS1987

Detecting forest structure and biomass with C-band multipolarization radar - Physical model and field tests

The ability of C-band radar (4.75 GHz) to discriminate features of forest structure, including biomass, is tested using a truck-mounted scatterometer for field tests on a 1.5-3.0 m pygmy forest of cypress (Cupressus pygmaea) and pine (Pinus contorta ssp, Bolanderi) near Mendocino, CA. In all, 31 structural variables of the forest are quantified at seven sites. Also measured was the backscatter from a life-sized physical model of the pygmy forest, composed of nine wooden trees with 'leafy branches' of sponge-wrapped dowels. This model enabled independent testing of the effects of stem, branch, and leafy branch biomass, branch angle, and moisture content on radar backscatter. Field results suggested that surface area of leaves played a greater role in leaf scattering properties than leaf biomass per se. Tree leaf area index was strongly correlated with vertically polarized power backscatter (r = 0.94; P less than 0.01). Field results suggested that the scattering role of leaf water is enhanced as leaf surface area per unit leaf mass increases; i.e., as the moist scattering surfaces become more dispersed. Fog condensate caused a measurable rise in forest backscatter, both from surface and internal rises in water content. Tree branch mass per unit area was highly correlated with cross-polarized backscatter in the field (r = 0.93; P less than 0.01), a result also seen in the physical model.

Westman, Walter E.↗