Search NASA⌕ Search

SEARCH · Search NASA

Results for “Generalized gradient approximation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Selection of fluxing agent for coal ash and investigation of fusion mechanism: a first-principles study

An approach based on the ab initio quantum chemical modeling (CASTEP, generalized gradient approximation (GGA), and density functional theory (DFT)) was first employed to guide the selection of the appropriate fluxing agent to reduce the coal ash melting temperature. Two kinds of typical Chinese coal ash A and B with a high-melting temperature were chosen as the investigated subjects. Result of the calculation shows that mullite mineral, which is the main component of coal ash, is easier to combine with an electron acceptor than with an electron donor. Because the cations of borax (Na{sub 2}B{sub 4}O{sub 7}10H{sub 2}O) and limestone can act as electron acceptors, borax and limestone were selected as the fluxing agents in our experiment. Results of the experiment show that the melting temperatures of coal ash A and B are both decreased by borax and limestone, respectively. Moreover, borax has a better fluxing effect than limestone under the same conditions. The further numerical study on the coal ash fusing mechanism indicates that the Na{sup +} and Ca{sup 2+} cations, as acceptors, can enter into the crystal lattice of mullite mainly through O(7) and O(8) and then cause the Al(6)-O(8) and Al(5)-O(7) bonds to rupture in the (AlO{sub 6})-octahedron. From this, mullite is forced to transform to feldspar and corundum minerals that have a low binding energy. Because of the phase change of minerals in the coal ash, the coal ash melting temperature is decreased by adding borax and limestone. 27 refs., 8 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Ab initio study of phase transition and bulk modulus of NaH

The phase transition of NaH from NaCl- to CsCl-type structure is investigated by an ab initio plane-wave pseudopotential density functional theory method with the norm-conserving pseudopotential scheme in the frame of the generalized gradient approximation correction; the isothermal bulk modulus and its first and second pressure derivatives of the NaCl- and CsCl-type structures under high pressure and temperature are obtained through the quasi-harmonic Debye model. The phase transition obtained from the usual condition of equal enthalpies occurs at the pressure of 32 GPa, which is consistent with the experimental and other calculated values. Through the quasi-harmonic Debye model, in which the phononic effects are considered, the dependences of cell volume V and lattice constant a on temperature T at zero pressure, the isothermal bulk modulus B{sub 0} and its pressure derivatives B{sub 0}'and B{sub 0}'' on pressure P along isotherms 0, 300, and 600 K, are also successfully obtained. -- The isothermal bulk modulus B{sub T}, adiabatic bulk modulus B{sub S}, primitive cell volume V, and lattice constant a of an NaH with an NaCl-type structure as a function temperature T at zero pressure. When T<100 K, B nearly keeps constant; when T>100 K, B decreases dramatically as T increases. Correspondingly, when T<100 K, the primitive cell volume and lattice parameter of an NaH with an NaCl-type structure have a little change; when T>100 K, the primitive cell volume and lattice parameter changes rapidly as T increases. It is the rapid volume or lattice parameter variation that makes the bulk modulus B rapidly decrease. Display Omitted Research highlights: The transition phase of an NaH from NaCl to CsCl structure has been investigated. The relationship between B and T for an NaH at zero pressure has been given. The B{sub T} and its pressure derivatives of an NaH at high pressure have been obtained.

36 MATERIALS SCIENCE↗

Production of the thermal scattering law and neutron scattering cross sections for ice from first principles - 14503

Water ice can exist in many polymorphic phases as a result of the wide range of geometric ordering possible for the hydrogen bonds between H{sub 2}O molecules. Ice Ih, which can form under normal atmospheric pressure at 273 K, is the most common type. Ab initio density functional theory, incorporating the generalized gradient approximation (GGA) for the exchange-correlation energy, is used to simulate the hexagonal structure of ice Ih and calculate phonon dispersion relations with harmonic lattice dynamics. While the unit cell for ice Ih contains four molecules with particular alignments of the H{sub 2}O molecules possible, the structure has globally disordered proton arrangement. To improve capturing this random distribution, a 12-molecule unit cell is incorporated along with a 2x2x2 supercell. The total phonon density of states is determined by randomly sampling dispersion relations in the first Brillouin zone. The translational, librational, bending, and stretching modes are produced with high-quality resolution and are consistent with the optical peaks and ranges observed in Raman, infrared, and inelastic neutron scattering experiments [1]. The phonon spectrum is used to calculate the S(α,β) thermal scattering law for ENDF [2] publication in the incoherent approximation, which is appropriate due to the relatively small coherent nuclear scattering cross section for H{sub 2}O. These theoretical results are compared to experimental S(α,β) at 268 K [3] and trends are found to be in good agreement. Finally, total scattering cross sections are calculated by integrating over S(α,β) to determine the incoherent inelastic cross sections and then separately adding the absorption and incoherent elastic components. These results are compared to experimental total cross sections for ice Ih at 115 K over a range of incident energies [4] and found to provide excellent agreement. (authors)

42 ENGINEERING↗

Ferromagnetism in GaN: Gd: A density functional theory study

First principle calculations of the electronic structure and magnetic interaction of GaN:Gd have been performed within the Generalized Gradient Approximation (GGA) of the density functional theory (DFT) with the on-site Coulomb energy U taken into account (also referred to as GGA+U). The ferromagnetic p-d coupling is found to be over two orders of magnitude larger than the s-d exchange coupling. The experimental colossal magnetic moments and room temperature ferromagnetism in GaN:Gd reported recently are explained by the interaction of Gd 4f spins via p-d coupling involving holes introduced by intrinsic defects such as Ga vacancies.

25 ENERGY STORAGE↗

First-principles elastic properties of (alpha)-Pu

Density-functional electronic structure calculations have been used to investigate the ambient pressure and low temperature elastic properties of the ground-state {alpha} phase of plutonium metal. The electronic structure and correlation effects are modeled within a fully relativistic anti-ferromagnetic treatment with a generalized gradient approximation for the electron exchange and correlation functionals. The 13 independent elastic constants, for the monoclinic {alpha}-Pu system, are calculated for the observed geometry. A comparison of the results with measured data from resonant ultrasound spectroscopy for a cast sample is made.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles elastic properties of (alpha)-Pu

Density-functional electronic-structure calculations have been used to investigate the ambient pressure and low temperature elastic properties of the ground-state {alpha} phase of plutonium metal. The electronic structure and correlation effects are modeled within a fully relativistic antiferromagnetic treatment with a generalized gradient approximation for the electron exchange and correlation functional. The 13 independent elastic constants, for the monoclinic {alpha}-Pu system, are calculated for the observed geometry. A comparison of the results with measured data from recent resonant ultrasound spectroscopy for a cast sample is made.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Construction of meta-GGA functionals through restoration of exact constraint adherence to regularized SCAN functionals

The strongly constrained and appropriately normed (SCAN) meta-GGA exchange–correlation functional is constructed as a chemical environment-determined interpolation between two separate energy densities: one describes single-orbital electron densities accurately and another describes slowly varying densities accurately. To conserve constraints known for the exact exchange–correlation functional, the derivatives of this interpolation vanish in the slowly varying limit. While theoretically convenient, this choice introduces numerical challenges that degrade the functional’s efficiency. We have recently reported a modification to the SCAN meta-GGA, termed restored-regularized-SCAN (r 2 SCAN) , that introduces two regularizations into SCAN, which improve its numerical performance at the expense of not recovering the fourth order term of the slowly varying density gradient expansion for exchange. Here, we show the derivation of a progression of density functional approximations [regularized SCAN (rSCAN), r++SCAN, r 2 SCAN, and r 4 SCAN] with increasing adherence to exact conditions while maintaining a smooth interpolation. The greater smoothness of r 2 SCAN seems to lead to better general accuracy than the additional exact constraint of SCAN or r 4 SCAN does.

, correlation energy↗

Proof-of-concept of a reinforcement learning framework for wind farm energy capture maximization in time-varying wind

Here, we present a proof-of-concept distributed reinforcement learning framework for wind farm energy capture maximization. The algorithm we propose uses Q-Learning in a wake-delayed wind farm environment and considers time-varying, though not yet fully turbulent, wind inflow conditions. These algorithm modifications are used to create the Gradient Approximation with Reinforcement Learning and Incremental Comparison (GARLIC) framework for optimizing wind farm energy capture in time-varying conditions, which is then compared to the FLOw Redirection and Induction in Steady State (FLORIS) static lookup table wind farm controller baseline.

17 WIND ENERGY↗

Theoretical Study of Mechanical Stability and Physical Properties of Co{sub 2}V{sub 1−x}Zr{sub x}Ga

The mechanical stability and physical properties of Co{sub 2}V{sub 1−x}Zr{sub x}Ga (x = 0, 0.25, 0.50, 0.75, 1) have been predicted by using ab initio calculations based on density functional theory. The exchange-correlation potentials are treated within the generalized gradient approximation-Perdew-Burke and Ernzerhhof (GGA-PBE) and Hubbard coefficient (GGA+U). The investigated minimum lattice parameter of Co{sub 2}VGa is 5.8030 Å, which is in excellent agreement with available experimental and theoretical data and for Co{sub 2}V{sub 1−x}Zr{sub x}Ga (x = 0.25, 0.50, 0.75, 1) are 5.9026, 5.9625, 6.0060 and 6.0021 Å, respectively, which are predicted for the very first time. The total magnetic moments decrease with increasing concentration of x in Co{sub 2}V{sub 1−x}Zr{sub x}Ga, in agreement with the Slater-Pauling rule. Band structure and density of states calculations show that the minority spin channel exhibits band gaps of 0.43, 0.46, 0.52, 0.54 and 1.01 eV for GGA+U scheme around the Fermi level confirming that all the studied composites are half-metallic in nature. In this study, we also studied the elastic constant and it is established that all the materials are mechanically stable and ductile in nature. The Co{sub 2}VGa is stiffer than other materials and all the studied composites have anisotropic behaviour. Moreover, by using a quasi-harmonic Debye model and calculated elastic constant, the Debye temperature and temperature-dependent constant volume heat capacity have been investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Descriptors for Electrolyte-Renormalized Oxidative Stability of Solvents in Lithium-Ion Batteries

Electrolyte stability against oxidation is an important factor limiting the development of high energy density batteries. The highest occupied molecular orbital (HOMO) level of solvent molecules has been traditionally used for understanding trends in their oxidative stability, but this assumes a noninteracting environment. However, solvent HOMO levels are renormalized because of molecules in their solvation shells. In this work, we first demonstrate an inexpensive and accurate method to determine the HOMO level of the solvent followed by simple descriptors for renormalization of the HOMO level due to different electrolyte components. The descriptors are based on Gutmann donor and acceptor numbers of the solvent and other components. The method uses fast generalized gradient approximation-level density functional theory calculations compared to previously used expensive, experimental data-dependent methods. This method can be used to screen for unexplored stable solvents among the large number of known organic compounds to design novel high-voltage stable electrolytes.

25 ENERGY STORAGE↗

Hg binding on Pd binary alloys and overlays

The vast majority of the mercury released from coal combustion is elemental mercury. Noble metals such as Pd, Au, Ag, and Cu have been proposed to capture elemental mercury. Density functional theory calculations are carried out to investigate mercury interactions with Pd binary alloys and overlays in addition to pure Pd, Au, Ag, and Cu surfaces using a projected augmented wave method with the Perdew-Wang generalized 0 gradient approximation. It has been determined that Pd has the highest mercury binding energy in comparison to other noble metals. In addition, Pd is found to be the primary surface atom responsible for improving the interaction of mercury with the surface atoms in both Pd binary alloys and overlays. Deposition of Pd overlays on Au and Ag enhance the reactivity of the surface by shifting the d-states of surface atoms up in energy. Strong mercury binding causes a significant overlap between the s- and p-states of Pd and the d-state of Mercury.

01 COAL, LIGNITE, AND PEAT↗

Ab initio DFT+U Study of He Atom Incorporation into UO2 Crystals

We present and discuss results of the density functional theory (DFT) for perfect UO2 crystals with He atoms in octahedral interstitial positions therein. We have calculated basic bulk crystal properties and He incorporation energies into the low temperature anti-ferromagnetic UO2 phase using several exchange–correlation functionals within the spin-polarized local density (LDA) and generalized gradient (GGA) approximations. In all DFT calculations we included the on-site correlation corrections using the Hubbard model (DFT+U approach). We analysed a potential crystalline symmetry reduction from tetragonal down to orthorhombic structure and confirmed the presence of the Jahn–Teller effect in a perfect UO2. We discuss also the problem of a conducting electronic state arising when He is placed into a tetragonal antiferromagnetic phase of UO2 commonly used in defect modelling. Consequently, we found a specific monoclinic lattice distortion which allowed us to restore the semiconducting state and properly estimate He incorporation energies. Unlike the bulk properties, the He incorporation energy strongly depends on several factors, including the supercell size, the use of spin polarization, the exchange–correlation functionals and on-site correlation corrections. We compare our results for the He incorporation with the previous shell model and ab initio DFT calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Improving the density functional theory description of water with self-consistent polarization

We present a comprehensive set of results for water, a case study of a hydrogen-bonded system, using the self-consistent polarization density functional theory (SCP-DFT). With minimal parametrization, SCP-DFT is found to give good results for the interaction energy of the dimer; the geometries, cohesion energies, and harmonic frequencies of larger clusters; and the structure and enthalpy of the liquid, as compared to accurate theoretical and experimental benchmarks. We also compared our SCP-DFT potential to the base DFT BLYP potential and also to a simpler dispersion-supplemented potential, BLYP-D. Using the symmetry-adapted perturbation theory (with a DFT description of monomers), the BLYP, BLYP-D, and SCP-DFT water dimer potentials were analyzed into their physically interpretable components. Comparison with the benchmark SAPT(DFT) components showed reasonable agreement for all the four components of electrostatics, exchange, induction, and dispersion energies. This procedure enhances understanding and can suggest further improvements. Thus, the SCP-DFT approach holds promise as a fast, efficient, and accurate method for performing ab initio dynamics that include additional polarization and dispersion interactions for large, complex systems involving solvation and bond breaking.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic structure and magnetic properties of Fe 1– x Co x alloys

Using genetic algorithm with first-principle calculations, we searched for low-energy crystal structures of Fe 1−x Co x alloys. We found that Fe 1−x Co x alloys are highly configurationally degenerate with many additional off-stoichiometric stable structures to the well-known B 2 structure. The average magnetic moment of Fe atom increases with concentration of Co in the alloy, while that of Co atom is almost constant, which are consistent with experiments and earlier studies. The magnetic moment of Fe atom is strongly dependent on the number of Co nearest neighbor and it increases with this number.

36 MATERIALS SCIENCE↗

Methane dissociative chemisorption and detailed balance on Pt(111): Dynamical constraints and the modest influence of tunneling

A dynamically biased (d-) precursor mediated microcanonical trapping (PMMT) model of the activated dissociative chemisorption of methane on Pt(111) is applied to a wide range of dissociative sticking experiments, and, by detailed balance, to the methane product state distributions from the thermal associative desorption of adsorbed hydrogen with coadsorbed methyl radicals. Tunneling pathways were incorporated into the d-PMMT model to better replicate the translational energy distribution of the desorbing methane product from the laser induced thermal reaction of coadsorbed hydrogen and methyl radicals occurring near T{sub s} = 395 K. Although tunneling is predicted to be inconsequential to the thermal dissociative chemisorption of CH{sub 4} on Pt(111) at the high temperatures of catalytic interest, once the temperature drops to 395 K the tunneling fraction of the reactive thermal flux reaches 15%, and as temperatures drop below 275 K the tunneling fraction exceeds 50%. The d-PMMT model parameters of (E{sub 0} = 58.9 kJ/mol, s = 2, η{sub v} = 0.40) describe the apparent threshold energy for CH{sub 4}/Pt(111) dissociative chemisorption, the number of surface oscillators involved in the precursor complex, and the efficacy of molecular vibrational energy to promote reaction, relative to translational energy directed along the surface normal. Molecular translations parallel to the surface and rotations are treated as spectator degrees of freedom. Transition state vibrational frequencies are derived from generalized gradient approximation-density functional theory electronic structure calculations. The d-PMMT model replicates the diverse range of experimental data available with good fidelity, including some new effusive molecular beam and ambient gas dissociative sticking measurements. Nevertheless, there are some indications that closer agreement between theory and experiments could be achieved if a surface efficacy less than one was introduced into the modeling as an additional dynamical constraint.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Competing adsorption mechanisms of pyridine on Cu, Ag, Au, and Pt(110) surfaces

We explore the adsorption of pyridine on Cu, Ag, Au, and Pt(110) surfaces using density functional theory. To account for the van der Waals interaction, we use the optB86b-vdW, optB88-vdW, optPBE-vdW, revPBE-vdW, and rPW86-vdW2 functionals. For comparison, we also run calculations using the generalized gradient approximation-PBE (Perdew–Burke–Ernzerhof) functional. We find the most stable adsorption site to depend on both metal and functional, with two energetically favorable adsorption sites, namely, a vertically oriented site and a flat pyridine site. We calculate that every functional predicts pyridine to lie in the vertical configuration on the coinage metals at a low coverage. On Pt(110), by contrast, we calculate all the functionals—except rPW86-vdW2—to predict pyridine to lie flat at a low coverage. By analyzing these differences for these adsorption configurations, along with various geometric and electronic properties of the adsorbate/substrate system, we access in detail the performance of the 6 functionals we use. We also characterize the nature of the bonding of pyridine on the coinage metals from weak to strong physisorption, depending on the functional used. On Pt(110), we characterize the nature of the bonding of pyridine as ranging from strong physisorption to strong chemisorption depending again on the functional used, illustrating both the importance of the van der Waals interaction to this system and that this system can make a stringent test for computational methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accelerating defect predictions in semiconductors using graph neural networks

First-principles computations reliably predict the energetics of point defects in semiconductors but are constrained by the expense of using large supercells and advanced levels of theory. Machine learning models trained on computational data, especially ones that sufficiently encode defect coordination environments, can be used to accelerate defect predictions. Here, we develop a framework for the prediction and screening of native defects and functional impurities in a chemical space of group IV, III–V, and II–VI zinc blende semiconductors, powered by crystal Graph-based Neural Networks (GNNs) trained on high-throughput density functional theory (DFT) data. Using an innovative approach of sampling partially optimized defect configurations from DFT calculations, we generate one of the largest computational defect datasets to date, containing many types of vacancies, self-interstitials, anti-site substitutions, impurity interstitials and substitutions, as well as some defect complexes. We applied three types of established GNN techniques, namely crystal graph convolutional neural network, materials graph network, and Atomistic Line Graph Neural Network (ALIGNN), to rigorously train models for predicting defect formation energy (DFE) in multiple charge states and chemical potential conditions. We find that ALIGNN yields the best DFE predictions with root mean square errors around 0.3 eV, which represents a prediction accuracy of 98% given the range of values within the dataset, improving significantly on the state-of-the-art. We further show that GNN-based defective structure optimization can take us close to DFT-optimized geometries at a fraction of the cost of full DFT. The current models are based on the semi-local generalized gradient approximation-Perdew–Burke–Ernzerhof (PBE) functional but are highly promising because of the correlation of computed energetics and defect levels with higher levels of theory and experimental data, the accuracy and necessity of discovering novel metastable and low energy defect structures at the PBE level of theory before advanced methods could be applied, and the ability to train multi-fidelity models in the future with new data from non-local functionals. The DFT-GNN models enable prediction and screening across thousands of hypothetical defects based on both unoptimized and partially optimized defective structures, helping identify electronically active defects in technologically important semiconductors.

Rahman, Md Habibur (ORCID:000000027705984X)↗