Search NASA⌕ Search

SEARCH · Search NASA

Results for “Graphite Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A novel nanostructured composite formed by interaction of copper octa(3-aminopropyl)octasilsesquioxane with azide ligands: Preparation, characterization and a voltammetric application

This study presents the preparation, characterization and application of copper octa(3-aminopropyl)octasilsesquioxane following its subsequent reaction with azide ions (ASCA). The precursor (AC) and the novel compound (ASCA) were characterized by Fourier transform infrared spectra (FTIR), nuclear magnetic resonance (NMR), electron paramagnetic resonance (EPR), scanning electronic microscopy (SEM), X-ray diffraction (XRD), Thermogravimetric analyses and voltammetric technique. The cyclic voltammogram of the modified graphite paste electrode with ASCA (GPE-ASCA), showed one redox couple with formal potential (E{sub 1/2}{sup ox}) = 0.30 V and an irreversible process at 1.1 V (vs. Ag/AgCl; NaCl 1.0 M; v=20mVs{sup -1}). The material is very sensitive to nitrite concentrations. The modified graphite paste electrode (GPE-ASCA) gives a linear range from 1.0 x 10{sup -4} to 4.0 x 10{sup -3} mol L{sup -1} for the determination of nitrite, with a detection limit of 2.1 x 10{sup -4} mol L{sup -1} and the amperometric sensitivity of 8.04 mA/mol L{sup -1}.

36 MATERIALS SCIENCE↗

Capacitive deionization using carbon derived from an array of zeolitic-imidazolate frameworks

Capacitive deionization (CDI) represents one of the most thermodynamically efficient technologies for brackish water desalination. Its performance is highly reliant on the surface properties of carbon-based electrodes. Zeolitic-imidazolate framework (ZIF)-derived carbon materials have emerged among the most promising candidates owing to their high structural and compositional tuneability. However, the impacts of the precursory ZIF structure on the properties of the final carbon, and therefore, CDI capacity and efficiency remain to be further explored. In this work, four Zn-based ZIFs with different side-chain substitutions on the imidazolates were synthesized on a gram scale with high yields to produce N-doped carbons by pyrolysis. Next, the resulting carbons along with four commercial carbon blacks were characterized physically and electrochemically to explore the structure-performance relationship. We demonstrated that the imidazole side-chain substitution alters the ZIF's decomposition during pyrolysis, influencing the elemental compositions, surface properties, wettability and graphitization levels. The diverse carbon properties result in variable double layer capacitance and charge-transfer resistance, ultimately impacting the CDI performance. Among these carbons, Zn (4abIm)2-C afforded the greatest salt adsorption capacity of 14.19 mg NaCl $·g_C^{–1}$, while Zn (mIm) 2 -C showed the highest overall salt adsorption capacity and rate; both exceeded the performance of the commercial carbon blacks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Visualization of Solid Electrolyte Interphase Formation in Lithium-Ion Batteries with In Situ Electrochemical Transmission Electron Microscopy

Complex, electrochemically driven transport processes form the basis of electrochemical energy storage devices. The direct imaging of electrochemical processes at high spatial resolution and within their native liquid electrolyte would significantly enhance our understanding of device functionality, but has remained elusive. In this work we use a recently developed liquid cell for in situ electrochemical transmission electron microscopy to obtain insight into the electrolyte decomposition mechanisms and kinetics in lithium-ion (Li-ion) batteries by characterizing the dynamics of solid electrolyte interphase (SEI) formation and evolution. Here we are able to visualize the detailed structure of the SEI that forms locally at the electrode/electrolyte interface during lithium intercalation into natural graphite from an organic Li-ion battery electrolyte. We quantify the SEI growth kinetics and observe the dynamic self-healing nature of the SEI with changes in cell potential.

25 ENERGY STORAGE↗

Solid Radiochemistry Nuclear Diagnostic Results from Exploding Pusher Shot (N130503-002) at the National Ignition Facility

The Solid Radiochemistry (SRC) nuclear diagnostic platform has been developed for the assessment of various performance parameters, such as areal fuel density and ablator-fuel mixing, associated with the capsule implosion of DT-fuel, hohlraum based shots at the National Ignition Facility (NIF). This diagnostic is based on the collection and characterization of debris from the capsule and surrounding materials (primarily gold from the hohlraum). SRC utilizes two diagnostic instrument manipulators (DIMs), 90-78 and 0-0, to field debris collectors (maximum of four metallic and/or graphite foils per DIM) inside the NIF chamber during shots. The debris collectors are removed after a shot and transferred to the Nuclear Counting Facility (NCF) for the measurement of gold activation (Au-196m and Au-196) and capture (Au-198) products via gamma spectroscopy. The results from SRC which show a strong dependency on an independently measured neutron down scatter ratio (DSR) are utilized as part of a 1-D capsule model to determine the areal densities (ρR(DT) and ρR(CH)) during burn. This report summarizes the SRC results from the Indirect Drive Exploding Pusher shot (N130503-002) designed to produce low ρR at burn time (~40 mg/cm 2 ) leading to a significant decrease in DSR (0.23±0.07 %). As a result, this shot is considered a calibration shot for SRC nuclear diagnostic.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Synthesis of Bismuth Functionalized Grapheme Oxide for Radioactive Iodine Gas Removal - 16114

Released radioactive iodine from nuclear reactors and nuclear severe accidents, such as those experienced at Chernobyl and Fukushima, is one of the most hazardous materials and can affect human health. Uptake of radioactive iodine from gaseous and aqueous waste, consisting of mainly organic forms such as methyl iodide and elemental iodine after reacting with organic matter in scrubber process, is a recent concern during nuclear power plant operation. In general, Triethylenediamine (TEDA) or KI-impregnated activated carbons, silver-loaded silica aerogels, and silver-loaded zeolite are used to remove radioactive iodine compounds. However, previous research has shown TEDA and KI-impregnated activated carbons to have some limitations for use in responding to severe accidents or in pressurized-water reactors, because they are easily burned up and the iodine removal efficiency of silver-loaded sorbents is greatly decreased at high temperatures. To improve the capability of synthesized sorbent material used in iodine gas removal, highly efficient sorbents for methyl and elemental iodine removal were prepared through the functionalization of graphene oxide (GO) with bismuth. GO was synthesized from natural graphite powder (99.95%) by the modified Hummers method, and then mixed with Bi(NO{sub 3}){sub 3}.5H{sub 2}O. After developing a sorbent for the removal of iodine, the synthesized sorbent was characterized using x-ray diffraction, a scanning electron microscope/energy dispersive spectrometer, and thermogravimetric analysis/differential scanning calorimetry, and the surface area of sorbents was determined using the BET-N{sub 2} adsorption method. Methyl iodine batch experiments were conducted for 7 days and elemental iodine gas adsorption experiments were conducted at high temperature (190 deg. C) using a carrier gas (air). The final concentration of iodine in batch and off-gas scrubber solutions (0.1 M NaOH) was analyzed using inductively coupled plasma mass spectrometry. The breakthrough curve and decontamination factor values were also investigated using bismuth-functionalized GO and the results were compared with Ag-zeolite, Sn-apatite, and activated carbon. (authors)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Grain size variation in nanocrystalline silicon carbide irradiated at elevated temperatures

This study reports on ion irradiation-induced grain growth in nanocrystalline SiC films on Si substrates. The SiC grains with average size ranging from ~2 to 20 nm were embedded in amorphous SiC matrices. Irradiation was performed using 5 MeV Xe23+ ions to 115 ions/nm2 at 700 K. The irradiated films were characterized using x-ray diffraction, transmission electron microscopy and Raman spectroscopy. Significant grain growth is observed for smaller grains that tend to saturate at ~8 nm. In contrast, irradiation of larger grains (~20 nm in size) leads to a decrease in the grain size, which could be associated with the production of lattice disorder within the grains. Homonuclear C-C bonds in the irradiated amorphous SiC matrix are found to be graphitized. This bonding transformation could limit or inhibit grain growth and contribute to the size saturation. The results from this study may suggest nanocrystalline SiC as a promising candidate structural or cladding material for applications in advanced nuclear reactors.

Grain growth, ion irradiation, SiC↗

Facile preparation of CuO/g-C3N4 with enhanced photocatalytic degradation of salicylic acid

Highlights: • CuO /g-C{sub 3}N{sub 4} sheets were prepared by using a novel one-pot method. • CuO/g-C{sub 3}N{sub 4} exhibited higher catalytic activity than the parent g-C{sub 3}N{sub 4} material. • The increased photocatalytic activity was proposed. - Abstract: CuO particles supported on graphitic carbon nitride (g-C{sub 3}N{sub 4}) nanosheeets were prepared using a novel one-pot method. In the presence of ammonium nitrate, different mass ratios of copper nitrate/melamine were used to fabricate these catalysts, which were characterized using XRD, N{sub 2}-physisorption, FT-IR, TEM, XPS and UV–vis analysis. The catalytic performance of CuO/g-C{sub 3}N{sub 4} was evaluated by photodegrading salicylic acid under visible-light irradiation. Among these novel catalysts, CuO(1.0)/g-C{sub 3}N{sub 4} was found to exhibit the highest catalytic activity, which was more than 100% greater than the parent g-C{sub 3}N{sub 4} material. The improved photocatalytic properties of CuO/g-C{sub 3}N{sub 4} may be ascribed to the formation of p-n heterojunctions between CuO and g-C{sub 3}N{sub 4}, resulting in the effective separation of photogenerated electron-hole pairs and the enhanced absorption of visible light. Furthermore, the CuO/g-C{sub 3}N{sub 4} composites had excellent stability and reused for five times without obvious loss of activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermally activated diffusion of copper into amorphous carbon

Using x-ray photoelectron spectroscopy, the authors characterize the thermally activated changes that occur when Cu is deposited on amorphous carbon supported on Si at 300 K, then heated to 800 K. The authors compare data for Cu on the basal plane of graphite with pinning defects, where scanning tunneling microscopy reveals that coarsening is the main process in this temperature range. Coarsening begins at 500–600 K and causes moderate attenuation of the Cu photoelectron signal. For Cu on amorphous carbon, heating to 800 K causes Cu to diffuse into the bulk of the film, based on the strong attenuation of the Cu signal. Diffusion into the bulk of the amorphous carbon film is confirmed by changes in the shape of the Cu 2 p inelastic tail, and by comparison of attenuation between Cu 2 p and Cu 3 p lines. The magnitude of the photoelectron signal attenuation is compatible with Cu distributed homogeneously throughout the amorphous carbon film, and is not compatible with Cu at or below the C–Si interface under the conditions of our experiments. As a result, desorption is not significant at temperatures up to 800 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulation of the crystallinity of hydrogenated nitrogen-rich graphitic carbon nitrides

An hydrogenated nitrogen-rich graphitic carbon nitride, structurally related to the theoretical graphitic phase of C{sub 3}N{sub 4}, has been synthesized in a bulk well-crystallized form. This new material was prepared by thermal decomposition of thiosemicarbazide up to 600 deg. C at ambient pressure under nitrogen flow. Its composition was determined by elemental combustion analysis. Powder X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy and C{sup 13} MAS NMR characterizations were performed. This material can be schematically described with a two-dimensional framework and a composition close to C{sub 3}N{sub 4.17}H{sub 1.12}. In this nitrogen-rich material, C{sub 3}N{sub 3} voids are fully occupied by water molecules which are strongly trapped into the material. A loss of crystallinity associated with a modification of the thermal behavior is observed when the amount of trapped molecules decreases in the graphitic material, order being damaged both between and in the graphitic planes. - Graphical abstract: Graphitic hydrogenated nitrogen-rich carbon nitride was synthesized at ambient pressure and mild temperature. The nitrogen overstoichiometry is explained by the presence of triazine voids in the graphene planes. The presence of trapped water molecules into these voids tends to influence the crystallinity and the thermal behavior of the materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generation and characterization of carbon fiber microstructure in atomistic simulations

A clear understanding of carbon fiber (CF) microstructure is necessary for the development of high strength CFs. Here, we present an atomistic approach for generating and characterizing realistic mi- crostructures of CFs. Large-scale reactive molecular dynamics simulations are used to generate a set of distinct CF microstructures. Comprehensive characterization of the simulated microstructures is enabled by the development of a suite of computational structural analysis tools capable of evaluation of hy- bridization states of carbon atoms, populations and orientations of individual carbon rings, degree of graphitization, and pore size distribution. The calculation of X-ray diffraction profiles provides a direct link between the structural features of simulated samples and experimental data available for CFs. The CF generation algorithm is shown to produce microstructures with experimental densities and with structural characteristics matching those of PAN-based CFs. The key structural features affecting the properties of CFs, such as the relative fractions of graphitic, turbostratic and amorphous micro- constituents, degree of alignment, pore size distributions, and chemical cross-linking can be effectively controlled in simulations, thus enabling efficient exploration of structureeproperties relationships in CFs. The capabilities of the developed approach are illustrated by performing computational analysis of the mechanical deformation and fracture of CFs under axial tensile loading.

36 MATERIALS SCIENCE↗

Spatial distribution of sp 3 defects in carbon fibers via time-of-flight secondary ion mass spectrometry

Defects play a significant role in the material properties of carbon fibers (CF). Several defects result in the formation of sp 3 bonds in an otherwise sp 2 -dominant graphitic structure. Understanding the distribution of these defects within CF provides insight into their properties and the effect of manufacturing conditions. Reports showed time-of-flight secondary ion mass spectrometry (ToF-SIMS) is capable of characterizing the spatial distribution of sp 2 and sp 3 content in carbon materials. Here, ToF-SIMS was utilized to investigate the spatial distribution of sp 3 defects in T700, T1000, and M46 CF. M46 had the lowest sp 3 content. Center-to-edge analysis revealed that T700 CF had a gradient of sp 3 defects starting from the center and increasing to the edge, whereas M46 CF had a sudden increase in sp 3 defects roughly 1 μm from the edge. Comparatively, T1000 CF had a relatively uniform radial distribution of sp 3 defects, except for a newly identified sp 2 rich region at 0.8 μm from the center. This is hypothesized to originate from a skin–core structure that forms during CF manufacturing. As a result, this work demonstrates the utility of ToF-SIMS for characterizing the spatial distribution of sp 3 defects within CF, establishing new ways to understand CF formation.

Carbon fibers↗

Synthesis of carbon-coated iron nanoparticles by detonation technique

Carbon-coated iron nanoparticles were synthesized by detonating a mixture of ferrocene, naphthalene and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in an explosion vessel under low vacuum conditions (8.1 kPa). The RDX functioned as an energy source for the decomposition of ferrocene and naphthalene. The carbon-coated iron nanoparticles were formed as soot-like deposits on the inner surface of the reactor, which were characterized by XRD, TEM, HRTEM, Raman spectroscopy and vibrating sample magnetometer. And a portion of the detonation soot was treated with hydrochloric acid. The product was carbon-coated nanoparticles in perfect core-shell structures with graphitic shells and bcc-Fe cores. The detonation technique offers an energy-saving route to the synthesis of carbon-coated nanomaterials.

36 MATERIALS SCIENCE↗

Structural transformations of graphene exposed to nitrogen plasma: quantum chemical molecular dynamics simulations

Nitrogen-doped graphene (N-graphene) has been intensively studied for tailoring the electronic property of the graphene, because different nitrogen configurations influence the electronic properties of N-graphene in different ways. However, atomically precise control of the nitrogen configurations during the doping process remains a challenge in the synthesis of N-graphene. Moreover, additional structural transformations of the graphene carbon network structure as a side-effect of plasma doping are little understood and are as of yet uncontrollable. Therefore, we theoretically investigated the nitrogen doping process of graphene for a range of nitrogen atom incident kinetic energies in nonequilibrium quantum chemical molecular dynamics (QM/MD) simulations. We observed and characterized prominent configurations of N-containing graphene. In analogy to similar, earlier studies of graphene plasma hydrogenation, we observed an Eley–Rideal associative desorption mechanism during the graphene plasma nitrogenation, producing molecular nitrogen. Especially for graphitic-N (Gr-N) and Stone–Wales-defect-N (SW-N) configurations, which are frequently observed in experimental studies, we discovered two typical chemical reaction mechanisms which were well categorized by two key processes: adsorption of primary nitrogen dopant and collision with a secondary nitrogen dopant. Here, we discussed effects of the incident nitrogen energy on the formation mechanism, and propose a method to generate of Gr-N and SW-N configurations selectively by tuning the conditions with respect to the two key formation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heat Source Characterization in a TREAT Fuel Particle Using Coupled Neutronics-BCMC Calculations

This work presents a multi-physics, multi-scale approach to modeling the Transient Test Reactor (TREAT) currently prepared for restart at the Idaho National Laboratory. TREAT fuel is made up of microscopic fuel grains (r ˜ 20µm) dispersed in a graphite matrix. The novelty of this work is in coupling a binary collision Monte-Carlo (BCMC) model to the Finite Element based code Moose for solving a microsopic heat-conduction problem whose driving source is provided by the BCMC model tracking fission fragment energy deposition. This microscopic model is driven by a transient, engineering scale neutronics model coupled to an adiabatic heating model. The macroscopic model provides local power densities and neutron energy spectra to the microscpic model. Currently, no feedback from the microscopic to the macroscopic model is considered. TREAT transient 15 is used to exemplify the capabilities of the multi-physics, multi-scale model, and it is found that the average fuel grain temperature differs from the average graphite temperature by 80 K despite the low-power transient. The large temperature difference has strong implications on the Doppler feedback a potential LEU TREAT core would see, and it underpins the need for multi-physics, multi-scale modeling of a TREAT LEU core.

36 MATERIALS SCIENCE↗

Nuclear characterization of a general-purpose instrumentation and materials testing location in TREAT

The Transient Reactor Test facility (TREAT) was constructed in the late 1950s, provided thousands of transient irradiations before being placed in standby in 1994, and resumed operations in 2017 in order to reclaim its crucial role in nuclear-heated safety research. The latter half of TREAT’s historic operation was best known for integral-scale testing of fuel specimens under postulated reactor plant accident conditions, while TREAT’s earlier history included extensive simpler phenomena identification tests that elucidated fundamental behaviors and paved the way for these integral-scale tests. Advances in modern computational capabilities and a resurgence of interest in novel reactor technology have created an opportunity for emphasizing modernized science-based and separate effects test capabilities once again at TREAT. An innovative approach to this type of testing has been developed to leverage minor radioactivity built-in during brief TREAT irradiations in low activation hardware to facilitate handling for materials and instrumentation testing. This capability, termed the Minimal Activation Retrievable Capsule Holder (MARCH) irradiation vehicle system, will be used for inaugural fueled experiments in TREAT’s modern era as well as novel approaches to study materials undergoing neutron irradiation and instrumentation development and qualifications. This paper describes a comprehensive nuclear characterization, obtained via computational modeling, of the test position in the MARCH system. Though directly applicable to the MARCH system, the results also provide general quantification of the nuclear performance of the reactor and potential test materials, crucial for evaluating potential experiment design and response in TREAT. The neutron and photon flux environment was calculated via MCNP with ENDF/B-VII.1 nuclear data. Wire heating rate and DPA calculations were also performed and evaluated using historic TREAT test data. Furthermore, these calculations were performed to provide steady-state baseline reference values typical in both half- and full-slotted TREAT core configurations, enabling design scoping analysis prior to development of more specific design testing needs and transient testing experimentation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Support for Fuel Fabrication and Characterization

Oak Ridge National Laboratory (ORNL) has participated in the Advanced Gas Reactor (AGR) program for the Next Generation Nuclear Plant (NGNP) and the transition to the Idaho National Laboratory (INL) Advanced Reactor Technologies (ART) Technology Development Office (TDO) since the inception of the program. In this effort, ORNL has fabricated tristructural isotropic (TRISO) fuel and fuel compacts for AGR-1, AGR-2, and AGR-3/4 experiments, provided matrix only components for AGC-2, AGC-4, and AGR 3/4 experiments and for university studies, and provided characterization, coating, and compaction support for INL and BWX Technologies Nuclear Operations Group (BWXT). In fiscal year (FY) 2017, the activities for the INL ART TDO fuel development are focused on preparations for the AGR-5/6/7 experiments and technical support to the Generation-IV International Forum (GIF) pre-irradiation leach-burn-leach (LBL) round robin effort with China and South Korea. With the successful transfer of fuel fabrication technology to BWXT, ORNL’s involvement has shifted toward transferring fuel characterization methods, providing technical support, verification of BWXT laboratory results, and fabricating surrogate fuel materials for university collaborations. ORNL will also provide analytical support to BWXT and INL for uranium dispersion analysis and confirmatory fuel characterization analyses as needed.