SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Simple loop first-in-first-out (FIFO) bubble memory shift register has continuous storage capability. Bubble shift register simplifies chip-control electronics by enabling all control functions to be alined at same bit. FIFO shift register is constructed from passive replicator and annihilator combinations.
Ultrasonically detected microbubbles were more abundant in the pulmonary artery of dogs intravenously injected with 10 ml of saline than in the same noninjected control during 10,000 ft (3,048 m), 20,000 ft (6,096 m), and 40,000 ft (12,121 m) exposures. Continuous intravenous (i.v.) drip infusions also introduced many small bubbles. Since they may serve as 'nuclei' for visible intravascular bubble formation, are sometimes associated with decompression sickness, and are additionally considered undesirable, it would appear prudent to minimize i.v. injections immediately before flights. However, a 10-min delay before ascent wil reduce their number and a 60-min delay will insure their almost complete absence. Also, slow ascent, a 1-h denitrogenation time, or use of a degassed solution will help reduce their total number.
A Solid State Spacecraft Data Recorder (SSDR), based on bubble domain technology, having a storage capacity of 10 to the 8th power bits, was designed and is being tested. The recorder consists of two memory modules each having 32 cells, each cell containing sixteen 100 kilobit serial bubble memory chips. The memory modules are interconnected to a Drive and Control Unit (DCU) module containing four microprocessors, 500 integrated circuits, a RAM core memory and two PROM's. The two memory modules and DCU are housed in individual machined aluminum frames, are stacked in brick fashion and through bolted to a base plate assembly which also houses the power supply.
A preliminary study of the unsteady viscous flow in the region of an airfoil leading edge was performed, in which the interaction between the viscous and inviscid flow fields is neglected. The solution method uses the finite difference form of the governing equations throughout the separated flow field and incorporates a transition model based on the integral turbulence kinetic energy equation. The validity of the numerical procedure is verified by making comparisons with analytical solutions to several test problems, including unsteady flow over a plate oscillating in its own plane. The method was then applied to the problem of unsteady viscous flow over a NACA 0012 airfoil oscillating sinusoidally in pitch. The flow field characteristics were in qualitative agreement with experimental results. The bubble moved forward on the airfoil and decreased in size as incidence was increased. Viscous flow in the leading edge region was found to be quasi-steady, while bubble height varied inversely with Reynolds number.
The detailed structure of the interaction of a strong stellar wind with the interstellar medium is presented. First, an adiabatic similarity solution is given which is applicable at early times. Second, a similarity solution is derived which includes the effects of thermal conduction between the hot (about 1 million K) interior and the cold shell of swept-up interstellar matter. This solution is then modified to include the effects of radiative energy losses. The evolution of an interstellar bubble is calculated, including the radiative losses. The quantitative results for the outer-shell radius and velocity and the column density of highly ionized species such as O VI are within a factor 2 of the approximate results of Castor, McCray, and Weaver (1975). The effect of stellar motion on the structure of a bubble, the hydrodynamic stability of the outer shell, and the observable properties of the hot region and the outer shell are discussed.
Research work on multilayer self-structured bubble memories is at an early stage. The coupling of bubbles to stripes is investigated theoretically and experimentally and shown to be adequate for propagation. Propagation of stripes is demonstrated both by current access and field access techniques. These propagation techniques are of prime interest because they can eliminate most photographic features from the storage area. Multilayer films offer great promise for higher-capacity higher-density memories in which most of the photolithography has been eliminated and the minimum feature size of much of the remaining has been increased. Furthermore, stripe propagation can be carried out with current access, providing a significant reduction in packaging cost and power consumption over field access devices.
An incompressible, two-dimensional, thin separation bubble is treated as an obstacle to the potential flow that perturbs and adjusts the original inviscid flow. The knowledge of the perturbed velocity allows a complete flow description in vicinity of the bubble. Suitable differential equations and boundary conditions are developed for three distinct regions, namely, a potential region, a parabolic viscous layer, and a viscous, slow recirculating region. With modified boundary conditions the boundary layer equations are regularly integrated through the separation region. Conclusions are also made on the wall stress and the position of zero velocity and zero vorticity lines.
This paper reports on implementation of a magnetic bubble memory in a two-level hierarchial system. The hierarchy used a major-minor loop device and RAM under microprocessor control. Dynamic memory addressing, dual bus primary memory, and hardware data modification detection are incorporated in the system to minimize access time. It is the objective of the system to incorporate the advantages of bipolar memory with that of bubble domain memory to provide a smart, optimal memory system which is easy to interface and independent of user's system.
Method proposed for removing large hydrogen bubbles from nuclear environment uses, in its simplest form, hollow spheres of palladium or platinum. Methods would result in hydrogen bubble being reduced in size without letting more radioactivity outside reactor.
Surface tension gradient in melt forces gas bubbles to surface, increasing glass strength and transparency. Conventional chemical and buoyant fining are extremely slow in viscous glasses, but tension gradient method moves 250 um bubbles as rapidly as 30 um/s. Heat required for high temperature part of melt is furnished by stationary electrical or natural-gas heater; induction and laser heating are also possible. Method has many applications in industry processes.
Low power dissipation, compactness, and reliability are attributes of a bubble detection innovation for NASA's Bubble Memory Module. Heart of the design is a detector selection multiplexer which connects a chip in an addressed cell to one of two sense hybrids. By using diode selection, expensive, bulky, and high power components such as those used for sensing are shared between cells. Eight sense amplifiers serve 64 chips.
Preliminary experimental results are reported on a self-structured, multilayer bubble memory with buried data layer. Stripe domains are used to move carrier bubbles by magnetostatic coupling. An expression is derived for that coupling as a function of thickness of the GGG separation layer. Experimental values of coupling are given as a function of bias field. An expression for stripe curvature as a function of bias field is derived. The performance of seven different current access stripe propagation circuits is reported.
Test firings with experimental liquid propellant gun systems indicate that the main concern standing in the way of practical application of LPG's is the possibility of unexpected explosions during start up when pressure is rapidly applied to the liquid monopropellant in the chamber. The phenomenon of many collapse-rebound cycles of imploding bubbles is theorized as the probable cause of explosions in LP systems. It may be concluded that LPG safety would be enhanced by choosing an LP with low bulk modulus, as well as low decomposition reaction rate, and that a benign looking DTA trace is not a sufficient quarantee of insensitivity to a pressure induced explosion. It is also shown that pre-pressurizing an LP charge, thus pre-compressing the bubbles near-isothermally, makes the system relatively insensitive to such pressure induced explosions. The applicability of this analysis to the question of acceleration induced explosion of explosive filled warheads is indicated.
Streamline separation bubbles on aircraft profiles and fuselages were investigated. The additional drag was examined in relation to increased angle of incidence and unusually high wall sheer stress. A reduction of the separation bubble and a decrease in drag is obtained with pneumatic turbulators that blow ram air out of 0.6mm pilot tubes at a distance of 16 mm. The pneumatic models are implemented at various positions and are found to be effective after the position of separation.
A self-structured multilayered bubble device developed for spacecraft sensor systems is described. The data link buffer mass memory is analyzed, and system characteristics are estimated based on a nominal 1.6 micron bubble diameter. It is shown that a memory of at least 10 billion bits capacity and 30 megabits per second could be developed with conventional spacecraft constraints.
Applications of bubble and drop technologies are discussed and include: low gravity manufacturing, containerless melts, microballoon fabrication, ink printers, laser fusion targets, generation of organic glass and metal shells, and space processing. The fluid dynamics of bubbles and drops were examined. Thermomigration, capillary flow, and interfacial tension are discussed. Techniques for drop control are presented and include drop size control and drop shape control.
The formation of extended p-n junctions in semiconductors by drop migration, mechanisms and morphologies of migrating drops and bubbles in solids and nucleation and corrections to the Volmer-Weber equations are discussed. Bubble shrinkage in the processing of glass, the formation of glass microshells as laser-fusion targets, and radiation-induced voids in nuclear reactors were examined.
The shape of a gas bubble which rises through a quiescent incompressible, Newtonian fluid at intermediate Reynolds numbers is considered. Exact numerical solutions for the velocity and pressure fields, as well as the bubble shape, are obtained using finite difference techniques and a numerically generated transformation to an orthogonal, boundary-fitted coordinate system. No restriction is placed on the allowable magnitude of deformation.