Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Near-infrared quantum-cutting luminescence and energy transfer properties of Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+},Ce{sup 3+} phosphors

The phosphors Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+} by co-doping Ce{sup 3+} have been synthesized by conventional high-temperature solid-state reaction method. Their spectroscopic properties in the UV-VIS-NIR range have been investigated. The first 5d crystal field level location and stokes shift have been determined from the UV excitation and emission spectra of Ca{sub 3}(PO{sub 4}){sub 2}:Ce{sup 3+}. The three-photon NIR quantum-cutting luminescence of Tm{sup 3+} assigned to the electronic transitions of {sup 1}G{sub 4}→{sup 3}H{sub 4}, {sup 3}H{sub 4}→{sup 3}F{sub 4} and {sup 3}F{sub 4}→{sup 3}H{sub 6} is observed, whether in Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+} or Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+},Ce{sup 3+}. The energy transfer from Ce{sup 3+} to Tm{sup 3+} takes place with energy-transfer efficiency up to 34.5% for the Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+},Ce{sup 3+}. A cross relaxation scheme using the 5d states of Ce{sup 3+} and f-f transition of Tm{sup 3+} is proposed. The mechanism is revealed from energy level and decay measurements. The results show that the broadband absorption of Ce{sup 3+} sensitizer not only extends the spectrum conversion in UV region but also greatly enhances the photoluminescence intensities of the three-photon quantum cutting luminescence of Tm{sup 3+} doped Ca{sub 3}(PO{sub 4}){sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical properties of Ba(Dy{sub 1/2}Nb{sub 1/2})O{sub 3} ceramic

Polycrystalline Ba(Dy{sub 1/2}Nb{sub 1/2})O{sub 3} was prepared using a high-temperature solid-state reaction method. X-ray diffraction analysis indicated the formation of a single-phase cubic structure having space group Pm3m. AC impedance plots as a function of frequency at different temperatures were used to analyse the electrical behaviour of the sample, which indicated the negative temperature coefficient of resistance character. Complex impedance analysis targeted non-Debye type dielectric relaxation. Frequency dependent ac conductivity data obeyed Jonscher’s power law. The apparent activation energy was estimated to be 0.97 eV at 1 kHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Al-doped MgB{sub 2} materials studied using electron paramagnetic resonance and Raman spectroscopy

Undoped and aluminum (Al) doped magnesium diboride (MgB{sub 2}) samples were synthesized using a high-temperature solid-state synthesis method. The microscopic defect structures of Al-doped MgB{sub 2} samples were systematically investigated using X-ray powder diffraction, Raman spectroscopy, and electron paramagnetic resonance. It was found that Mg-vacancies are responsible for defect-induced peculiarities in MgB{sub 2}. Above a certain level of Al doping, enhanced conductive properties of MgB{sub 2} disappear due to filling of vacancies or trapping of Al in Mg-related vacancy sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, structure, and transport properties of Ba 8 Cu 16 – x Au x P 30 clathrate solid solution

In this work, a new clathrate solid solution Ba 8 Cu 16 – x Au x P 30 ( x = 4, 8, 12) was synthesized by a high-temperature solid-state annealing method. The crystal structures of Ba 8 Cu 16 – x Au x P 30 were determined by single crystal x-ray diffraction. This clathrate solid solution crystallizes in the orthorhombic superstructure of clathrate-I type with 23 crystallographically independent framework sites, eight of them are occupied by Au/Cu and 15 are exclusively occupied by P atoms. The distribution of Au and Cu atoms over these eight framework sites is not random with a clear preference for Au to occupy the largest (Au/Cu)P 4 tetrahedra in the framework. The thermal stability and thermoelectric properties of the Ba 8 Cu 16 – x Au x P 30 solid solution were evaluated. Low thermal conductivity was achieved for Ba 8 Cu 16 – x Au x P 30 due to the combination of the host–guest crystal structure with rattling Ba atoms with the presence of heavy Au atoms and substitutional Cu/Au disorder in the clathrate framework.

36 MATERIALS SCIENCE↗

Resonant x-ray scattering method for measuring cation stoichiometry in BaSnO 3 thin films

In this study, we develop a resonant scattering technique to measure cation stoichiometry of lanthanum-doped BaSnO 3 (BSO) thin films on a DyScO 3 substrate. Samples are grown by a hybrid molecular beam epitaxy method and display high room-temperature carrier mobilities. The measured thin films are grown with widely differing cation arrival rates, with Ba being evaporated from an elemental source and Sn from a SnO 2 source. Differences in mobilities in these films may arise from differences in Ba/Sn cation stoichiometry. Owing to the similar scattering strength of the Ba and Sn cations, odd-order Bragg peaks of BSO are particularly sensitive to the material's cation stoichiometry, i.e., the Ba/Sn ratio. Sensitivity to cation stoichiometry is further enhanced using the technique of resonant x-ray scattering, which changes the scattering strength of a single element across the Ba L absorption edges. We determine that the Ba/Sn cation stoichiometry varies from unity by less than 1% for films of mobility ranging from 84.8 to 144 cm 2 /(V s) and conclude that the mobility of these films scales with film thickness and growth rate rather than stoichiometry.

36 MATERIALS SCIENCE↗

Dynamometer Testing of Planar Mixed-Potential Sensors

Mixed-potential sensors for vehicle on-board emissions monitoring applications have been fabricated in an automotive planar sensor configuration using high temperature ceramic co-fire methods. The sensing element consists of dense Pt and LaSrCrO electrodes and a porous 3 mol% YSZ electrolyte. This sensor construct exhibits preferential selectivity to NO x (NO+NO 2 ) when operated at a positive current bias. The performance of the planar sensors under engine-out conditions was recently evaluated at the Oak Ridge National Laboratory National Transportation Research Center on a GM 1.9L CIDI diesel engine. The sensor response qualitatively tracked transients in NO x measured via FTIR under transient engine operation. Additionally, quantitative correlation between sensor voltage response and total NO x concentration was obtained under steady-state engine speed and load while varying exhaust gas recirculation (EGR) levels.

42 ENGINEERING↗

Electronic Structure of Tungsten-Doped β -Ga 2 O 3 Compounds

Tungsten (W) doped gallium oxide (Ga2O3) (Ga2-2xWxO3, 0.00=x=0.30, GWO) polycrystalline ceramic compounds were synthesized via conventional, high-temperature solid-state reaction method. The effect of W-doping on the crystal structure and electronic structure of the resulting GWO materials is studied in detail. The GWO compounds were single-phase, crystallized in ß-Ga2O3 for x=0.15, at which point the Ga2O3-WO3 composite formation occurs. The average crystallite size increases with increasing W-content; however, the effect is predominant only in the single phase GWO compounds. Corroborating with structural analyses, the X-ray photoelectron spectroscopy (XPS) measurements reveal the chemical state of W ions vary in GWO compounds as a function of W concentration. The mixed chemical valence states of W (W4+ and W6+) were evident in single-phase GWO compounds where the W-concentration is lower. However, W ions exhibit the highest chemical valence state (W6+) for higher x values, which resulted in the Ga2O3-WO3 composite formation. The Ga ions exists in their highest chemical valence state (Ga3+) in all of the GWO compounds. The scientific understanding of the electronic structure of the GWO materials derived as function of W concentration could be useful while considering the W-doped Ga2O3 materials and/or W-Ga2O3 contacts for electronic and optoelectronic device applications.

W-doping, Ga2O3-WO3 Composite, Electronic Structur↗

Validation of Robustness in TCR Design Strategies

Advanced Manufacturing (AM) has been identified as one of key pathways in accelerating deployment of next generation of nuclear power plants. The nuclear industry continues to predominately rely on fabrication techniques and materials that their codes and standards were approved decades ago. This legacy approach in the highly regulated nuclear sector has brought uncertainty to commercial viability of nuclear energy in the U.S. The Transformational Challenge Reactor (TCR), sought to utilize AM methods for fabrication of a High Temperature Gas Reactor (HTGR). The program sought to leverage AM to construct a non-conventional geometry made up of TRISO fuel and hydride moderator in SiC matrix. This project objective was to provide independent analysis of the core configuration with separate set of tools and approaches than utilized by the TCR team in a 2-year time frame. This NEUP project also tackled a question: Can AM be a cost-effective tool in changing the commercial paradigm of nuclear. We investigated this question in-context of a micro HTGR. While respecting the inherit uncertainty in our input parameters, overall we saw that AM has potential in improving economic competitiveness of nuclear energy when employed on multiple fronts (i.e. few percentage cost improvement per component). Given realizing AM requires mass orders and large R&D investment for commercial utilization, Department of Energy should focus its support on few key enabling technologies and support their codes and standards development and qualification cost (including irradiation as applicable) rather than taking a diluted approach.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Cabling method of superconducting flat wires

A structure and method provide cables of high-temperature superconducting flat tape and/or filament wires, with a small bending diameter. A cable has a former having cross section that includes a rectangle having rounded ends (i.e. an obround), and the flat tape is wound around the surface of the former at an angle to minimize bending. The former surface may have raised helical ribs or lowered grooves to provide tape registration in multi-layer configurations. Tape may be wound from a spool onto the former under tension, and cut with a laser cutter to produce fine filaments immediately before winding. The former may be slit longitudinally to prevent loop eddy currents and reduce AC losses. The wound cable may be jacketed to provide a cable-in-conduit conductor (CICC), and coolant channels may be provided in the jacket or in the former.

Takayasu, Makoto↗

SYNTHESIS AND CHARACTERIZATION OF PROTON CONDUCTORS

The morphological and electrical properties of yttrium (Y) and indium (In) doped barium cerate perovskites of the form BaIn{sub 0.3-x}Y{sub x}Ce{sub 0.7}O{sub 3-{delta}} (with x=0-0.3) prepared by a modified Pechini method were investigated as potential high temperature proton conductors with improved chemical stability. The sinterability increased with the increase of In-doping, and the perovskite phase was found in the BaIn{sub 0.3-x}Y{sub x}Ce{sub 0.7}O{sub 3-{delta}} solid solutions over the range 0 {le} x {le} 0.3. The conductivities decreased (from x to x, insert quantitative values) while the tolerance to wet CO{sub 2} improved for BaIn{sub 0.3-x}Y{sub x}Ce{sub 0.7}O{sub 3-{delta}} samples with an increase of In-doping.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A new operator-split Compton scattering method

In high-energy-density physics, when the temperatures are high (keV-range) and/or the densities are low, Compton scattering becomes the main energy transfer mechanism between the radiation field and the material. The interaction between the radiation field and the material is non-linear in the radiation field – due to induced processes caused by photons being bosons – and in the material temperature. Many existing codes use a Compton-Fokker-Planck (CFP) approximation – which is inaccurate for high photon energies or material temperatures – or use linear approximations within a time-step. Here, we have implemented a new Compton-heating method called OS-FBC (Operator-Split Full-Boltzmann Compton) that solves the full, nonlinear Compton-heating system with few approximations.

97 MATHEMATICS AND COMPUTING↗

Impacts of engine lubrication oil-derived ash on soot oxidative reactivity on a catalytic gasoline particulate filter

Characterizing soot oxidation kinetics is crucial for understanding how gasoline particulate filters (GPFs) perform both in terms of filtration efficiency and pressure drop. The most common method for measuring soot oxidative reactivity is thermogravimetric analysis (TGA). Because TGA is an offline method, it may inaccurately predict how soot oxidizes on a GPF, especially if a catalytic washcoat is present that may enhance oxidation rates through surface interactions as the soot loads on the filter. In this work, a novel in-situ soot oxidative reactivity measurement method was developed. The method involved loading a catalytic GPF under high temperature conditions conducive to soot oxidation and measuring the filtration efficiency of 100 nm particles. A correlation was made between filtration efficiency and loaded soot mass on the filter to allow calculation of the soot oxidation rate. The method was evaluated in experiments using a 2.0 L gasoline direct injection (GDI) engine with three oils of varying additive packages, including an oil with a high zinc dialkyldithiophosphate (ZDDP) concentration, a non-additive, pure poly-alpha olefin (PAO) oil, and an oil with a high concentration of calcium sulfonate. Calculated specific soot oxidation rates ranged from ~0.06–0.6 min –1 and showed strong dependence on GPF inlet gas temperature and lubrication oil additive type. The results clearly demonstrated a catalytic effect of calcium-containing ash particles. Reactivity of soot produced by the engine running with the high calcium containing lubrication oil was increased. Similarly, the results indicated that the catalytic washcoat on the filter increased soot oxidation rates on-filter, especially at low soot loading. Conversely, the ZDDP oil additive exhibited a reactivity inhibiting effect, resulting in lower soot oxidation rates. Finally, this work represents the first known in-situ soot oxidative reactivity measurements on a GPF and elucidates the effect of lubrication oil additives and catalytic washcoat on oxidation rate.

42 ENGINEERING↗

Lithium diffusion in Li 4 Ti 5 O 12 at high temperatures

Synthesis of the spinel lithium titanate Li 4 Ti 5 O 12 by an alkoxide-free sol–gel method is described. This method yields highly pure and crystalline Li 4 Ti 5 O 12 samples at relatively low temperature (850 °C) and via short thermal treatment (2 h). 6 Li magic angle spinning nuclear magnetic resonance (MAS NMR) measurements on these samples were carried out at high magnetic field (21.1 T) and over a wide temperature range (295–680 K). The temperature dependence of the chemical shifts and integral intensities of the three 6 Li resonances demonstrates the migration of lithium ions from the tetrahedral 8a to the octahedral 16c sites and the progressive phase transition from a spinel to a defective NaCl-type structure. This defective structure has an increased number of vacancies at the 8a site, which facilitate lithium diffusion through 16c → 8a → 16c pathways, hence providing an explanation for the reported increase in conductivity at high temperatures. Molecular dynamics simulations of the spinel oxides Li 4+x Ti 5 O 12 , with 0 ≤ x ≤ 3, were also performed with a potential shell model in the temperature range 300–700 K. Finally, the simulations support the conclusions drawn from the NMR measurements and show a significant timescale separation between lithium diffusion through 8a and 16c sites and that out of the 16d sites.

Environmental Molecular Sciences Laboratory↗

Investigation of NbN x Thin Films and Nanoparticles Grown by Pulsed Laser Deposition and Thermal Diffusion

Niobium nitride films (NbN x ) were grown on Nb and Si (100) substrates using pulsed laser deposition (PLD), laser heating, and thermal diffusion methods. Niobium nitride films were deposited on Nb substrates using PLD with a Q-switched Nd: YAG laser (λ = 1064 nm, 40 ns pulse width, and 10 Hz repetition rate) at different laser fluences, different nitrogen background pressures and deposition temperatures. The effect of changing PLD parameters for films done by PLD was studied. The seen observations establish guidelines for adjusting the laser parameters to achieve the desired morphology and phase of the grown NbN x films. When the fabrication parameters are fixed, except for laser fluence, surface roughness, deposition rate, nitrogen content, and grain size increases with increasing laser fluence. Increasing nitrogen background pressure leads to change in the phase structure of the NbN x films from mixed -Nb 2 N and cubic δ-NbN phases to single hexagonal β-Nb 2 N. A change in substrate temperature led to a pronounced change in the preferred orientation of the crystal structure, the phase transformation, surface roughness, and composition of the films. The structural, electronic, and nanomechanical properties of niobium nitride PLD deposited at different nitrogen pressures (26.7-66.7 Pa) on Si(100) were investigated. The NbN x , films exhibited a cubic δ-NbN with a strong (111) orientation. A correlation between surface morphology, electronic, and superconducting properties was found. The highly-textured δ-NbN films have a T c up to 15.07 K. The film was deposited at a nitrogen background pressure of 66.7 Pa exhibited improved superconducting properties and showed higher hardness values as compared to films deposited at lower nitrogen pressures. NbN nanoclusters that were deposited on carbon coated Cu-grids using PLD at laser fluence of 8 J/cm 2 were observed. Niobium nitride is prepared by heating of Nb sample in a reactive nitrogen atmosphere (133 Pa) at a temperature of 900 °C. The results suggest that the niobium nitride was crystalline in the single phase of hexagonal β-Nb 2 N. As heating time increased, film growth continued with improvement in hardness and modulus. The XRD of samples prepared by a thermal diffusion method at low nitrogen pressure and high temperatures were reported. The samples were prepared at temperatures ranging from 1250-1500 °C. 2D-XRD images of samples, processed at temperature range from 1250 -1500 °C at pressure of 1.3×10 -3 Pa, showed the formation of an α phase. As pressure increased to 0.13 Pa, an α-NbN phase mixed with β-Nb 2 N phase appeared. Niobium nitride samples were prepared by laser nitridation using a Q-switched Nd: YAG nanosecond laser and Ti: sapphire femtosecond lasers. The effects of laser fluence on the formed phase, surface morphology, and electronic properties of the NbN x were investigated. Samples were prepared using Nd: YAG laser are of NbN x in the cubic δ-NbN phase. The femtosecond laser-nitrided samples were prepared by different laser fluences of 0.1-1.3 mJ/cm 2 at 4.0×10 4 Pa nitrogen pressure. NbN x samples with mixedα, β and δ phases were observed. The cubic δ-NbN structure is dominated over the other two phases.

Farha, Ashraf Hassan↗

Molecular dynamics studies of fundamental bulk properties of palladium hydrides for hydrogen storage

Solid-state hydrogen storage materials undergo complex phase transformations whose behavior are collectively determined by thermodynamic (e.g., Gibbs free energy), mechanical (e.g., lattice and elastic constants), and mass transport (e.g., diffusivity) properties. These properties depend on the reaction conditions and evolve continuously during (de)hydrogenation. Thus, they are difficult to measure in experiments. Because of this, past progress to improve solid-state hydrogen storage materials has been prolonged. Using PdH x as a representative example for interstitial metal hydride, we have recently applied molecular dynamics simulations to quantify hydrogen diffusion in the entire reaction space of temperature and composition. In this paper, we have further applied molecular dynamics simulations to obtain well-converged expressions for lattice constants, Gibbs free energies, and elastic constants of PdH x at various stages of the reaction. Finally, our studies confirm significant dependence of elastic constants on temperature and composition. Specifically, a new dynamic effect of hydrogen diffusion on elastic constants is discovered and discussed.

08 HYDROGEN↗

Extraction of the electron excess temperature in terahertz quantum cascade lasers from laser characteristics

Abstract We propose a method to extract the upper laser level’s (ULL’s) excess electronic temperature from the analysis of the maximum light output power ( P max ) and current dynamic range Δ J d = ( J max − J th ) of terahertz quantum cascade lasers (THz QCLs). We validated this method, both through simulation and experiment, by applying it on THz QCLs supporting a clean three-level system. Detailed knowledge of electronic excess temperatures is of utmost importance in order to achieve high temperature performance of THz QCLs. Our method is simple and can be easily implemented, meaning an extraction of the excess electron temperature can be achieved without intensive experimental effort. This knowledge should pave the way toward improvement of the temperature performance of THz QCLs beyond the state-of-the-art.

47 OTHER INSTRUMENTATION↗

Creep-Fatigue Properties of Additional 316H PM-HIP Materials Fabricated from Different Powder Compositions and Processing Routes

The process of powder metallurgy (PM) hot isostatic pressing (HIP) works by consolidating powdered materials at relatively high temperature and pressure to form near-net-shaped components. Ideally, PM-HIP production methods can reduce component lead time and improve designs for high-temperature reactors and/or microreactors. To introduce PM-HIP into Section III, Division 5 of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, it is necessary to show adequate material properties regarding creep, high-temperature low-cycle fatigue, and creep fatigue. However, prior work has shown that the creep-fatigue cycles to failure for PM-HIP 316H stainless steel are greatly reduced compared to the conventional, wrought product. This work continued creep-fatigue analysis on a 316H stainless steel with lower oxygen and nitrogen contents and at different HIP parameters than previously analyzed. The objective was to better understand what is causing the reduced PM-HIP 316H performance so improvements can be made PM-HIP 316H creep-fatigue lifetimes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a testing method for asbestos fibers in treated materials of asbestos containing wastes by transmission electron microscopy

Highlights: • A high sensitive and selective testing method for asbestos in treated materials of asbestos containing wastes was developed. • Asbestos can be determined at a limits are a few million fibers per gram and a few μg g{sup −1}. • High temperature melting treatment samples were determined by this method. Asbestos fiber concentration were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10{sup 6} g{sup −1}. - Abstract: Appropriate treatment of asbestos-containing wastes is a significant problem. In Japan, the inertization of asbestos-containing wastes based on new treatment processes approved by the Minister of the Environment is promoted. A highly sensitive method for testing asbestos fibers in inertized materials is required so that these processes can be approved. We developed a method in which fibers from milled treated materials are extracted in water by shaking, and are counted and identified by transmission electron microscopy. Evaluation of this method by using asbestos standards and simulated slag samples confirmed that the quantitation limits are a few million fibers per gram and a few μg/g in a sample of 50 mg per filter. We used this method to assay asbestos fibers in slag samples produced by high-temperature melting of asbestos-containing wastes. Fiber concentrations were below the quantitation limit in all samples, and total fiber concentrations were determined as 47–170 × 10{sup −6} f/g. Because the evaluation of treated materials by TEM is difficult owing to the limited amount of sample observable, this testing method should be used in conjunction with bulk analytical methods for sure evaluation of treated materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗