Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ionic diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

STRUCTURE AND PROPERTIES STUDY ON ENERGY MATERIALS: THERMOELECTRIC MATERIAL TETRAHEDRITE AND LITHIUM ION CONDUCTOR

Development of efficient energy materials is critical in order to ease the energy demand and reduce our dependence of fossil fuel. Thermoelectric materials are promising due to their capability of generating electrical power by recovering waste heat. The performance of thermoelectric materials is quantified by a dimensionless figure of merit zT, which depends on their properties such as electrical conductivity, Seebeck coefficient and thermal conductivity. Tetrahedrites, a copper antimony sulfosalt mineral, typified by Cu 12-x MxSb 4 S 13 , where M is a transition metal element such as Ni, Zn, Fe or Mn, have great potential for thermoelectric application due to their relatively high zT (close to 1 at 700 K), earth-abundance, environmental friendliness, favorable electrical properties, and most importantly intrinsic low lattice thermal conductivity (less than 1 W m -1 K -1 ) in wide temperature. In addition to energy recovery, reliable energy storage devices are also emerging to relieve the energy demand and improve the efficiency of consuming energy resources. Lithium-ion batteries are known to be reliable and successful electrochemical energy storage devices and appliable in various aspects, including laptops, smartphones and electrical vehicles. Lithium phosphorous oxynitride (LiPON) are widely used as thin-film solid-state electrolytes in Li-ion battery, which is the only demonstrated solid-state electrolyte that is quite stable in direct contact with Li metal at potentials from 0-5 V. However, the structure of LiPON, the effects of N doping, and the origin of its good electrochemical stability remains inconclusive. In this thesis, reliable modeling techniques accompanied with experimental tools, are applied to study the thermoelectric material tetrahedrite and the ionic conductor LiPON, in order to study their structural and dynamical properties. Accurate and efficient density-functional theory (DFT) and density-functional tight-binding (DFTB) methods, combined with molecular dynamics (MD) simulations are utilized in order to investigate the structures and properties of these energy materials. The incoherent and coherent atomic dynamics study of tetrahedrite Cu 10.5 NiZn 0.5 Sb 4 S 13 provides the origin of softening upon cooling by investigate the motion of Cu12e at different temperatures. The dynamic structure factors in the longitudinal and transverse direction will also be discussed. The Cu movement of Cu-rich tetrahedrite Cu 14 Sb 4 S 13 is revealed by Cu self-diffusivity, nuclear density map and “nudged elastic band” (NEB). Moreover, we investigate the effect of simulation cell size and basis sets on the DFT-based MD simulation results using tetrahedrite Cu1 0 Zn 2 Sb 4 S 13 thermoelectric as a model material, showing the advantage of larger cell by accessing smaller Q range. In addition, the low-temperature structural properties of Cu 12 Sb 4 S 13 is measured by neutron diffraction, which indicates that no cubic to tetragonal transition occurs at metal-semiconductor transition (MST) temperature. Thermoelectric properties such as Seebeck coefficient, electrical resistivity and electrical thermal conductivity will also be investigated. DFTB method is implemented to study the structure and transport properties of Li 3 PO 4 and LiPON, while the exploration of N doping effect is included. Lastly, the LiPON/Li interphase will be revealed in order to study the origin of electrochemical stability.

Li, Junchao↗
DOE OSTI2023

Stochastic and mixed density functional theory within the projector augmented wave formalism for simulation of warm dense matter

Stochastic density functional theory (DFT) and mixed stochastic-deterministic DFT are burgeoning approaches for the calculation of the equation of state and transport properties in materials under extreme conditions. In the intermediate warm dense matter regime, a state between correlated condensed matter and kinetic plasma, electrons can range from being highly localized around nuclei to delocalized over the whole simulation cell. The plane-wave basis pseudopotential approach is thus the typical tool of choice for modeling such systems at the DFT level. Unfortunately, stochastic DFT methods scale as the square of the maximum plane-wave energy in this basis. To reduce the effect of this scaling and improve the overall description of the electrons within the pseudopotential approximation, we present stochastic and mixed DFT approaches developed and implemented within the projector augmented wave formalism. In conclusion, we compare results between the different DFT approaches for both single-point and molecular dynamics trajectories and present calculations of self-diffusion coefficients of solid density carbon from 1 to 50 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Additive Engineering for Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have reached a certified 25.2% efficiency in 2019 due to their high absorption coefficient, high carrier mobility, long diffusion length, and tunable direct bandgap. However, due to the nature of solution processing and rapid crystal growth of perovskite thin films, a variety of defects can form as a result of the precursor compositions and processing conditions. The use of additives can affect perovskite crystallization and film formation, defect passivation in the bulk and/or at the surface, as well as influence the interface tuning of structure and energetics. Here, recent progress in additive engineering during perovskite film formation is discussed according to the following common categories: Lewis acid (e.g., metal cations, fullerene derivatives), Lewis base based on the donor type (e.g., O-donor, S-donor, and N-donor), ammonium salts, low-dimensional perovskites, and ionic liquid. Various additive-assisted strategies for interface optimization are then summarized; additives include modifiers to improve electron- and hole-transport layers as well as those to modify perovskite surface properties. To conclude, an outlook is provided on research trends with respect to additive engineering in PSC development.

14 SOLAR ENERGY↗
DOE OSTI2020

Ionic Liquid–Directed Nanoporous TiNb 2 O 7 Anodes with Superior Performance for Fast–Rechargeable Lithium–Ion Batteries

Nanoporous TiNb 2 O 7 (NPTNO) material is synthesized by a sol–gel method with an ionic liquid (IL) as the nanoporous structure directing template. NPTNO exhibits a high reversible capacity of 210 mAh g –1 even at the charging rate of 50 C and an excellent cyclability of half-cell capacity retention of 74% for 1000 cycles at 5 C and LiNi 0.5 Mn 1.5 O 4 -coupled full-cell capacity retentions of 81% and 87% for 1000 cycles at 1 C and 2 C, respectively. The studies of the 1000 cycled NPTNO electrode illustrate that the IL-directed mesoporous structure can enhance the cyclability of NPTNO cells due to the alleviation of repetitive mechanical stress and volume fluctuation induced by the repetitive Li + insertion-extraction processes. The measured Li + diffusion coefficients from the galvanostatic intermittent titration technique suggest that the IL-templating strategy indeed ensures the fast rechargeability of NPTNO cells based on the fast Li + diffusion kinetics. Benefitting from the nanoporous structure, NPTNO with unhindered Li + diffusion pathways achieves a superior rate capability in the titanium-based oxide materials and the best full-cell cyclability in the TNO materials. Furthermore, the templating potential of IL is demonstrated, and the superb electrochemical performance establishes the IL-directed NPTNO as a promising anode candidate for fast-rechargeable LIBs.

25 ENERGY STORAGE↗
DOE OSTI2018

Synthesis, crystal structures, and dye removal properties of a series of discrete and polymeric copper, zinc, cobalt, and cadmium complexes containing bis-pyridyl-bis-amine ligands

Two bis-pyridyl-bis-amine ligands, trans-1,2-bis(m-picolyamino)cyclohexane (rac-m-picchxn) and trans-1,2-bis(p-picolyamino)cyclohexane (rac-p-picchxn), derived from trans-1,2-diaminocyclohexane (rac-chxn), were assembled with CuCl{sub 2}, ZnCl{sub 2}, ZnBr{sub 2}, Co(NO{sub 3}){sub 2}, and CdCl{sub 2} through reactants slow diffusion to afford corresponding metal complexes. Complexes [Cu(R,R-m-picchxn)Cl{sub 2}] (1) and [Zn(rac-m-picchxn)Br{sub 2}] (3) are mononuclear coordination structures, complex [Zn{sub 2}(rac-m-picchxn)Cl{sub 4}]{sub n} (2) adopts a one-dimensional (1D) helical chain, complex {[Co(R,R-p-picchxn)(NO_3)_2]·THF·2/3H_2O}{sub n} (4) has a two-dimensional (2D) kgm layer structure, complex [Cd(rac-p-picchxn)Cl{sub 2}]{sub n} (5) suits a 1D double-stranded zigzag chain structure, and compound [Cu(rac-chxn){sub 2}][CuCl{sub 3}] (6) is a Cu(I)-Cu(II) mixed-valence ionic product generated from the hydrolysis of rac-p-picchxn associated with the reduction of Cu(II) ion. The two bis-pyridyl-bis-amine ligands possess a chelating-bridging mode in forming infinite network and a chelating-only mode in forming discrete complexes. These metal–organic architectures show the influence of metal ion combining with organic ligand and anion on the structure variation. Noteworthy, chain polymers 2 and 5 could be utilized in the removal of methyl orange (MO), acid orange 7 (AO7), and malachite green (MG) from water through adsorptive processes. The adsorption dynamics of MO and AO7 on 2 and MG on both 2 and 5 obeyed a pseudo-second-order kinetics while that of MO and AO7 on 5 followed a pseudo-first-order kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Energetic Ion Irradiation-Induced Disordered Nanochannels for Fast Ion Conduction

We report that atomically disordered oxides are seen as suitable candidate for fast oxygen conduction due to their remarkable enhancement in oxygen diffusivity compared with ordered oxides. In particular, disordered derivatives of pyrochlore-structured oxides (A 2 B 2 O 7 ) are seen as an interesting prospect due to the intrinsic existence of oxygen vacancies in their lattice. Using energetic ion irradiation, we demonstrated fabrication of structurally disordered nanoscale channels in A 2 B 2 O 7 (A = Gd, Yb; B = Ti, Zr) that act as selective pathways for fast oxygen conduction. Atomic-level characterization revealed that the amorphous core and surrounding defect-fluorite phase in the nanochannels exhibited distorted and differently coordinated Ti-O polyhedra, with very similar electronic structure. Lastly, the formation of defect-fluorite structure is facilitated by a decrease in the difference between the ionic radii of A- and B-site cations in the lattice.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ionic Liquid-Enhanced Interfaces to Boost Reactive C O2 Capture

The addition of ionic liquids (ILs) to a mixture containing a molecular solvent and other ionic species can induce the heterogeneous redistribution of cations and anions at the gas–liquid interface. This nonuniform redistribution of cations and anions driven by the differences in the solvophilicity of ions can improve the thermophysical and interfacial properties of such mixtures, creating a local chemical environment that is conducive to some reactions. In this work, ILs are added to a mixture of potassium hydroxide (KOH) and ethylene glycol (EG), used as a reactive absorbent and electrolyte in the migration-assisted moisture-gradient (MAMG) process for CO 2 capture. Molecular dynamics (MD) simulations are employed to probe into the effects of complex ion–ion and ion–solvent interactions and to examine the chemical composition at the gas–liquid interface. A total of 12 systems are investigated using molecular simulations to identify trends in the performance of IL additives based on the choice of cation, anion, and IL concentration. The cation effects are studied using IL additives based on 1-ethyl-3-methylimidazolium ([EMIM] + ) and 1-butyl-3-methylimidazolium ([BMIM] + ), while the impact of anions is examined using additives based on dicyanamide [DCA] − , triflate [TfO] − , bistriflimide [NTf 2 ] − , and hexafluorophosphate [PF 6 ] − anions, respectively. The influence of the IL concentration is also evaluated at molar concentrations between 1% and 4%. The simulation results indicate that the use of IL additives can affect the physical CO 2 solubility, surface tension, and the localization of CO 2 around the [OH] − ions at the gas–liquid interface. It is also evident that the choice of cations, anions, and IL concentration determines the extent to which the IL additives impact the local physicochemical properties. Physical dissolution, diffusive transport, and interaction with [OH] − are critical intermediate steps toward reactive CO 2 capture using a liquid absorbent. Hence, the improvement in one or more of these properties, aided by IL additives, is expected to improve the overall CO 2 capture performance. Experiments reaffirmed the impact of IL additives on CO 2 capture performance and the sensitivity to the choice of the cation, anion, and concentration of the IL additive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Facilitated transport membrane with functionalized ionic liquid carriers for CO 2 /N 2 , CO 2 /O 2 , and CO 2 /air separations

CO 2 separations from cabin air and the atmospheric air are challenged by the very low partial pressures of CO 2 . In this study, a facilitated transport membrane (FTM) is developed to separate CO 2 from air using functionalized ionic liquid (IL) and poly(ionic liquid) (PIL) carriers. A highly permeable bicontinuous structured poly(ethersulfone)/poly(ethylene terephthalate) ( b PES/PET) substrate is used to support the PIL–IL impregnated graphene oxide thin film. The CO 2 separation performance was tested under a mixture feed of CO 2 /N 2 /O 2 /H 2 O. Under 410 ppm of CO 2 at 1 atm feed gas, CO 2 permanence of 3923 GPU, and CO 2 /N 2 and CO 2 /O 2 selectivities of 1200 and 300, respectively, are achieved with helium sweeping on the permeate side. For increased transmembrane pressure (>0 atm), a thicker PIL–IL/GO layer was shown to provide mechanical strength and prevent leaching of the mobile carrier. CO 2 binding to the carriers, ion diffusivities, and the glass transition temperature of the PIL–IL gels were examined to determine the membrane composition and rationalize the superior separation performance obtained. This report represents the first FTM study with PIL–IL carriers for CO 2 separation from air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of stoichiometry and hydration level on water domain size and transport in poly(aryl piperidinium) alkaline anion-exchange membranes

Alkaline water electrolysis holds promise in decarbonizing the global economy by enabling renewable hydrogen production with non-precious group metal catalysts. Anion exchange membranes are an important component of alkaline water electrolyzers and would ideally be durable while allowing for high hydroxide conductivity. The poly(aryl piperidinium) (PAP) class of polymers has attracted recent interest due to their good mechanical robustness and high ionic conductivity. Here, in this work, we perform atomistic molecular dynamics (MD) simulations of several PAP polymers at experimentally relevant hydration levels and polymer ion exchange capacities (IECs) to gain nanoscale insight into their properties and to help elucidate the trade-offs that result from tuning the IECs through the polymer stoichiometry. Our MD-predicted macroscopic polymer properties were found to be in good agreement with experimentally available polymer swelling ratios, water-occupied volumes, X-ray scattering, and ionic conductivities. The models show that for hydration levels greater than 8H 2 O per cation a single water cluster will form that percolates through the system. The growth in water cluster size results in large polymer swelling, the creation of larger channels with widths of 7 Å or larger, and nanophase separation between the hydrophilic domains and the polymer with characteristic length scales of approximately 20–30 Å. The experimentally observed lack of a strong X-ray scattering peak at low wavevectors can be explained by a cancellation between the polymer-polymer/water-water and polymer-water correlations and not a loss in nanophase separation. The overlap in coordination environments of the hydroxide oxygen and polymer nitrogen atoms implies that vehicular diffusion between cationic groups could play a role in hydroxide transport. The polymers' hydroxide and water diffusion constants increase by approximately an order of magnitude between hydration levels of 8 and 20H 2 O per cation. However, there are diminishing returns in hydroxide diffusion constant once the IEC exceeds 2.4 meq/g.

08 HYDROGEN↗
DOE OSTI2019

Moisture Corrosion of LiH: A Kinetic Investigation by DRIFT Spectroscopy

Lithium hydride (LiH) is a unique, ionic compound with applications in a variety of industries. Unfortunately, LiH is very reactive toward H 2 O even at ppm levels, forming oxide (Li 2 O) and hydroxide (LiOH) corrosion layers while outgassing H 2 . An effective means to eliminate unwanted outgassing is vacuum-heating to convert LiOH into Li 2 O, although subsequent re-exposure to moisture during transport/handling reconverts some Li 2 O back to LiOH. A corrosion growth model for previously vacuum-baked LiH is necessary for long-term prediction of the hydrolysis of LiH. In this work, a para-linear hydroxide corrosion growth model is proposed for the reaction of previously vacuum-baked LiH samples with moisture. This model, composed of two competing diffusion reaction fronts at the LiOH/Li 2 O and Li 2 O/LiH interfaces, is validated experimentally by subjecting a previously vacuum-baked polycrystalline LiH sample to 35 ppm of H 2 O at room temperature while monitoring the corrosion growth as a function of time with diffuse-reflectance infrared Fourier transform (DRIFT) spectroscopy. The para-linear growth model for the hydrolysis of previously vacuum-baked LiH proposed in this report can also serve as a template for the hydrolysis of other hygroscopic oxides grown on metal or metal hydride substrates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Rare Earth and Transition Metal Containing Glasses

Transition metal (TM) and rare earth (RE) ions have been incorporated into many glass systems such as silicate, phosphate, and borosilicate-based oxide glasses, as well as in halide and chalcogenide glasses, that find applications ranging from optical, photonic, and magnetic devices, solid-state battery, to nuclear waste disposal. Understanding the structural role of RE and TM in these glasses can help to develop glass compositions for targeted applications with either high-optical emission efficiency, electrical conductivity, or chemical durability. In this chapter, we first provide a general introduction of the applications and structural features of RE and TM in glasses, then the critical aspects of molecular dynamics (MD) simulations of these glasses such as interatomic potentials, structural analysis tools to study RE and TM ions in glasses and their clustering behaviors, Quantitative Structure–Property Analysis (QSPR), diffusion and dynamic property calculations, and electronic structure calculations to understand electronic defects such as charge trapping and radiation effects are introduced. Three representative case studies are presented: the first one is on MD simulations of erbium- and europium-doped silica and silicate glasses, as well as cerium doped aluminophosphate glasses, that revealed the effect of glass composition on RE ion local structure and clustering behavior. Electronic structure calculations of cerium-doped glass show how the existence of multioxidation states help to mediate radiation-induced damages caused by excited electron–hole pairs was also discussed. The second one focuses on alkali vanadophosphate glasses where the existence of two vanadium oxidation states help to provide electronic conduction in the glasses while alkali ions provide ionic conduction. MD simulations were used to understand vanadium environments and other structural aspects in the phosphate glasses, as well as the ionic transport behaviors of alkali ions. The third case study is on zirconium-containing borosilicate and aluminosilicate glasses that find wide applications in nuclear waste disposal. MD simulations help to provide structural details of zirconium ions that are validated by diffraction and EXAFS spectra. The structural information was used to interpret changes of mechanical properties and chemical durability by using QSPR and other analyses-based MD-generated structure models.

Du, Jincheng↗
DOE OSTI2025

Scaling microstructural processes in the sintering of ionic ceramics

A multi-scale framework, combining a multiphase field formulation and large deformation mechanics, was developed as a stepping stone to perform the data analytics of the microstructural level kinetics of a sintering solid. Relevant microstructural information from this framework, such as grain, stress, and porosity statistics, was scaled up to describe the macroscopic level sintering kinetics. Here, the developed formulation was applied to describe the electric field assisted sintering of Y 2 O 3 . Microstructural inhomogeneities in a multi-granular solid result in the formation of a field of compressive stress networks, which interleave with low compression and weakly tensile regions, defining a scaffolding for sintering concentration regions to develop. A Poisson effect-induced lateral stress network is also naturally self-induced as a result of the mechanical constraints imposed by the sintering apparatus. For long sintering times, localized shear stresses enhancing mass flow along grain boundaries and internal surfaces develop. Three-sided pores are removed by either vacancy transport to the surrounding pores, or move towards the external surfaces through grain boundary diffusion. Four- and higher order-sided pores stabilize because an equal amount of vacancies are gained and lost through the connecting grain boundaries. Grain dewetting contributes to pore coalescence, suggesting that pore kinetics and grain growth are coupled and should be analyzed in concert. The combined sintering and grain growth kinetics define six regimes of sintering behavior: (1) T, the transient regime; (2) E$_Υ$, the surface energy dominated, early sintering regime, where the grain growth exponent, p = 1, and the stress concentration factor, $f$ ~ $1/\hat{ρ}^{4.6}$; (3) E S , the stress dominated, early sintering regime, where p = 1 and $f$ ~ $1/\hat{ρ}^{4}$; (4) I$_Υ$, the surface energy dominated, intermediate sintering regime, where p = 2 and $f$ ~ $1/\hat{ρ}^{4.6}$; (5) I S , the stress dominated, intermediate sintering regime, where p = 2 and $f$ ~ $1/\hat{ρ}^{4}$; and (6) L, the late sintering regime, where p = 3 and $f$ ~ 1. At the macroscopic level, the rapid densification and suppression of grain growth observed in the electric field assisted sintering process is a consequence of the compounding effects of the underlying stress-, transport-, and interfacial-energy-induced energy minimization kinetics, as predicted by the multi-scale framework.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Influence of Ether-Functionalized Pyrrolidinium Ionic Liquids on Properties and Li + Cation Solvation in Solvate Ionic Liquids

Ionic liquids are tunable solvents composed entirely of ions that have properties desirable as electrolytes for lithium batteries such as non-flammability and a large electrochemical stability window. Solvate ionic liquids are a subclass of ionic liquids that consist of a glyme-based solvent and lithium salt in an equimolar ratio, where Li + cation-glyme solvation interactions result in ionic liquid-like properties. LiG4TFSi is a well-studied solvate ionic liquid consisting of equimolar amounts of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and tetraglyme (G4). In this work, pyrrolidinium ionic liquids with ether-functionalized side chains were synthesized containing either one ether (EO1) moiety or three ether (EO3) moieties and mixed with LiG4TFSI to form a new class of electrolyte mixtures. Their physical and transport properties, as well as ion solvation structures, were characterized by electrochemical, thermal, rheological, and spectroscopic measurements. The conductivity of the electrolyte mixture composed of EO1:LiTFSI:G4 in a 1:1:1 molar ratio is 2.54 mS/cm at 30 °C, compared to 1.53 mS/cm for LiG4TFSI, an increase of 67%. A significant decrease in the conductivity to 0.279 mS/cm is observed for the EO3:LiTFSI:G4 mixture in a 1:1:0.4 molar ratio. Pulsed-field gradient nuclear magnetic resonance (PFG-NMR) measurements revealed that the EO1 cation diffuses significantly faster than the EO3 cation in their respective mixtures. Liquid-state 13 C NMR experiments indicate that Li + cations preferentially coordinate with tetraglyme. Li + cations do not coordinate with the EO1 cation and only coordinate with EO3 ether side chains at lower concentrations of tetraglyme. We hypothesize that the oligoether EO3 cation competes with G4 and TFSI - for lithium cation solvation in G4 deficient compositions, leading to a largely adverse effect on the mass transport properties of the electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Photo-induced halide redistribution in 2D halide perovskite lateral heterostructures

An improved understanding of the degradation pathways under external stimuli is needed to address stability challenges in two-dimensional (2D) perovskite semiconductor materials. Here, in this study, in situ synchrotron nanoprobe X-ray fluorescence (nano-XRF) is used to investigate the evolution of halide redistribution within various 2D halide perovskite (n = 1–3) lateral heterostructures under ultraviolet (UV) exposure. Further, the results show that iodine (I) experiences a loss in all cases, with the rate of change following the perovskite dimensionality monotonically. In contrast, bromine (Br) is relatively more stable than I in n = 2 and 3 heterostructures, with no significant change in the total Br concentration but a visible amount of Br diffusion to the previously I-rich regime. Combining nano-XRF and X-ray absorption spectroscopy (XAS), we found a reduction of dimensionality in crystals with n > 1 after UV exposure, indicating significant structural reconfiguration beyond ion migration.

2D halide perovskites↗
DOE OSTI2020

Surface Amorphization of Vanadium Dioxide (B) for K-ion Battery

Given the merits of low cost, fast ionic transport in electrolyte, and high operating voltage, potassium ion batteries (PIBs) are promising alternatives to lithium-ion batteries. However, developing suitable electrode materials that can reversibly accommodate large potassium ions is a great challenge. In this paper, guided by density functional theory (DFT) calculations, it is demonstrated that the strategy of interfacial engineering via surface amorphization of VO 2 (B) nanorods (SA-VO 2 ), which results in the formation of a crystalline core/amorphous shell heterostructure, enables superior K + storage performance in terms of large capacity, outstanding rate capability, and long cycle stability working as an anode for PIBs. DFT calculations reveal that the created crystalline/amorphous heterointerface in SA-VO 2 can substantially lower the surface energy, narrow the band gap, and reduce the K + diffusion barrier of VO 2 (B). These conditions enable enhanced K + storage capacity and rapid K + /electron transfer, which result in large capacity and outstanding rate capability. Using in situ X-ray diffraction and in situ transmission electron microscopy complemented by ex situ microscopic and spectroscopic techniques, it is unveiled that the superior cycling stability originates from the excellent phase reversibility with negligible strain response and robust mechanical behavior of SA-VO 2 upon (de)potassiation.

25 ENERGY STORAGE↗
DOE OSTI2019

Molecular Investigation of Oxidized Graphene: Anatomy of the Double-Layer Structure and Ion Dynamics

We investigated the influence of surface oxidization of planar graphene electrodes on charge storage and ion dynamics of supercapacitors. Our approach compared two distinct ionic liquid (IL) electrolytes: tetraethylammonium tetrafluoroborate solvated in acetonitrile (TEA-BF4/ACN) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide solvated in acetonitrile (EMIm-TFSI/ACN). Both experimental electrochemical tests and molecular dynamics (MD) simulations showed positive, electrolyte-specific influences of hydroxyl-free electrode interfaces on capacitance. In the EMIm-TFSI/ACN system, the hydroxylated surface, because of its strong interaction with anions, impeded surface charge storage. On the other hand, in the case of TEA-BF4/ACN, the distribution and orientation of ACN across the system exerted vital influence on the capacitance, especially on the positive hydroxyl-free electrode. Furthermore, MD simulations of ion mobility with respect to the electrode surface in the lateral and perpendicular directions revealed significantly slower diffusion performance on the oxidized surface. Our efforts enhanced the level of fundamental understanding of the effects of hydroxyl groups on electrode–electrolyte interfaces and resulting supercapacitor performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗