Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Role of fly ash in the removal of organic pollutants from wastewater

Fly ash, a relatively abundant and inexpensive material, is currently being investigated as an adsorbent for the removal of various organic pollutants from wastewater. The wastewater contains various types of phenolic compounds, such as chloro, nitro, amino, and other substituted compounds. Various types of pesticides, such as lindane, malathion, carbofuran, etc., and dyes, such as, methylene blue, crystal violet, malachite green, etc., are also present in the wastewater. These contaminants pollute the water stream. These organic pollutants, such as phenolic compounds, pesticides, and dyes, etc., can be removed very effectively using fly ash as adsorbent. This article presents a detailed review on the role of fly ash in the removal of organic pollutants from wastewater. Adsorption of various pollutants using fly ash has been reviewed. The adsorption mechanism and other influencing factors, favorable conditions, and competitive ions, etc., on the adsorption process have also been discussed in this paper. It is evident from the review that fly ash has demonstrated good removal capabilities for various organic compounds. 171 refs., 3 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Modeling of contaminant transport in underground coal gasification

In order to study and discuss the impact of contaminants produced from underground coal gasification on groundwater, a coupled seepage-thermodynamics-transport model for underground gasification was developed on the basis of mass and energy conservation and pollutant-transport mechanisms, the mathematical model was solved by the upstream weighted multisell balance method, and the model was calibrated and verified against the experimental site data. The experiment showed that because of the effects of temperature on the surrounding rock of the gasification panel the measured pore-water-pressure was higher than the simulated one; except for in the high temperature zone where the simulation errors of temperature, pore water pressure, and contaminant concentration were relatively high, the simulation values of the overall gasification panel were well fitted with the measured values. As the gasification experiment progressed, the influence range of temperature field expanded, the gradient of groundwater pressure decreased, and the migration velocity of pollutant increased. Eleven months and twenty months after the test, the differences between maximum and minimum water pressure were 2.4 and 1.8 MPa, respectively, and the migration velocities of contaminants were 0.24-0.38 m/d and 0.27-0.46 m/d, respectively. It was concluded that the numerical simulation of the transport process for pollutants from underground coal gasification was valid. 42 refs., 13 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Experiment and modeling of CO{sub 2} capture from flue gases at high temperature in a fluidized bed reactor with Ca-based sorbents

The cyclic CO{sub 2} capture and CaCO{sub 3} regeneration characteristics in a small fluidized bed reactor were experimentally investigated with limestone and dolomite sorbents. Kinetic rate constants for carbonation and calcination were determined using thermogravimetric analysis (TGA) data. Mathematical models developed to model the Ca-based sorbent multiple cycles of CO{sub 2} capture and calcination in the bubbling fluidized bed reactor agreed with the experimental data. The experimental and simulated results showed that the CO{sub 2} in flue gases could be absorbed efficiently by limestone and dolomite. The time for high-efficiency CO{sub 2} capture decreased with an increasing number of cycles because of the loss of sorbent activity, and the final CO{sub 2} capture efficiency remained nearly constant as the sorbent reached its final residual capture capacity. In a continuous carbonation and calcination system, corresponding to the sorbent activity loss, the carbonation kinetic rates of sorbent undergoing various cycles are different, and the carbonation kinetic rates of sorbent circulating N times in the carbonation/calcination cycles are also different because of the different residence time of sorbent in the carbonator. Therefore, the average carbonation rate was given based on the mass balance and exit age distribution for sorbent in the carbonator. The CO{sub 2} capture characteristics in a continuous carbonation/calcination system were predicted, taking into consideration the mass balance, sorbent circulation rate, sorbent activity loss, and average carbonation kinetic rate, to give useful information for the reactor design and operation of multiple carbonation/calcination reaction cycles. 27 refs., 15 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Effect of natural mineral inclusions on the graphitizability of a Pennsylvania anthracite

A Pennsylvania anthracite was heat-treated to temperatures in excess of 2000{sup o}C. Carbides formed at 2200{sup o}C and then decomposed at 2500{sup o}C. This process aided in the graphitization of the anthracite. The carbide formation-decomposition reactions were the sole graphitization mechanism for this anthracite. This was shown by demineralizing (to remove the natural mineral inclusions) and then heat-treating the sample to 2600{sup o}C. X-ray diffraction (XRD) of the heat-treated demineralized sample showed that the (112) peak, which is indicative of three-dimensional ordering and was previously observed in the native heat-treated anthracite, was no longer present. The demineralized anthracite was remineralized by individually adding four types of minerals (rutile, quartz, calcite, and hematite) to demineralized samples. Each of the remineralized samples was heat-treated and found to exhibit the (112) peak again. The absence of the (112) XRD peak after removal of minerals and heat treatment followed by its reappearance after remineralization and heat treatment strongly suggests that the anthracite was only graphitizable if mineral matter was present. 37 refs., 10 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Post-treatment of fly ash by ozone in a fixed bed reactor

The residual carbon in fly ash produced from pulverized coal combustion can adsorb the air-entraining admixtures (AEAs) added to enhance air entrainment in concrete. This behavior of the ash can be suppressed by exposing the fly ash to oxidizing species, which oxidizes the carbon surface and thus prevents the AEA to be adsorbed. In the present work, two fly ashes have been ozonated in a fixed bed reactor and the results showed that ozonation is a potential post-treatment method that can lower the AEA requirements of a fly ash up to 6 times. The kinetics of the carbon oxidation by ozone was found to be fast. A kinetic model has been formulated, describing the passivation of carbon, and it includes the stoichiometry of the ozone consumption (0.8 mol of O{sub 3}/kg of C) and an ineffective ozone loss caused by catalytic decomposition. The simulated results correlated well with the experimental data. 28 refs., 7 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Study on the stability of sorbents removing H{sub 2}S from hot coal gas

Mixed metal oxide containing iron with the high-sulfur capacity and reactivity is considered as one of the most favorable sorbents for desulfurization in hot gas. The stability and life of iron-based sorbents are the main challenges for the hot gas cleanup techniques. Not only the effect of gas atmosphere but also the effect of ZnO and MgO on the stability of iron-based sorbent was studied in this work. The mechanism and factors influencing sorbent stability are discussed. The results showed that the coexistence of CO and H{sub 2} result in the instability of the zinc-iron-based sorbents. The reaction of carbon deposit is the crucial step affecting the stability of sorbent for hot gas desulfurization. ZnO in the sorbent is adverse to the physical stability of the iron-based sorbents. MgO in the sorbent hardly affects the physical stability of the iron-based sorbents but improves the capacity of removing the hydrogen sulfide from hot coal gas at 773 K. 12 refs., 8 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

NO reduction in decoupling combustion of biomass and biomass-coal blend

Biomass is a form of energy that is CO{sub 2}-neutral. However, NOx emissions in biomass combustion are often more than that of coal on equal heating-value basis. In this study, a technology called decoupling combustion was investigated to demonstrate how it reduces NO emissions in biomass and biomass-coal blend combustion. The decoupling combustion refers to a two-step combustion method, in which fuel pyrolysis and the burning of char and pyrolysis gas are separated and the gas burns out during its passage through the burning-char bed. Tests in a quartz dual-bed reactor demonstrated that, in decoupling combustion, NO emissions from biomass and biomass-coal blends were both less than those in traditional combustion and that NO emission from combustion of blends of biomass and coal decreased with increasing biomass percentage in the blend. Co-firing rice husk and coal in a 10 kW stove manufactured according to the decoupling combustion technology further confirmed that the decoupling combustion technology allows for truly low NO emission as well as high efficiency for burning biomass and biomass-coal blends, even in small-scale stoves and boilers. 22 refs., 6 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Sulfur behavior in the Sasol-Lurgi fixed-bed dry-bottom gasification process

This article reports on the findings of a study regarding the sulfur behavior across a Sasol-Lurgi gasifier. This was undertaken to understand the behavior of the various sulfur-bearing components in the coal, as they are exposed to the conditions in the gasifier. In this study, conventional characterization techniques were employed to monitor the behavior of sulfur-bearing mineral matter across the gasifier. It was observed from the study that the sulfur-bearing mineral (pyrite) in the coal structure undergoes various changes with pyrite being transformed to pyrrhotite and then to various oxides of iron with the subsequent loss of sulfur to form H{sub 2}S. A low proportion of the sulfur species including the organically associated sulfur was encapsulated by a melt that was formed by the interaction between kaolinite and fluxing minerals (pyrite, calcite, and dolomite/ankerite) present in the coal at elevated temperatures and pressure, thereby ending up in the ash. The remaining small proportions of sulfur-bearing mineral matter including pyrite and organically bound sulfur in the unburned carbon in the carbonaceous shales also report to the ash. 18 refs., 8 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Fine ash formation during pulverized coal combustion

In this study, 15 pulverized coal samples were burnt in a drop-tube furnace to investigate the formation of fine particulates and the influence of coal ash properties on their emission. Coal combustion was carried out at 1673 K in air. Fine particles were collected by a cyclone and a low-pressure impactor. The elemental compositions of the collected particles were analyzed by scanning electron microscopy with energy-dispersive X-ray spectroscopy. We examined the chemical compositions of the fine particles as a function of particle diameter and examined the proportions of the elements in the parent coal samples. We determined that almost all particles less than 0.22 {mu}m in diameter were formed by means of volatilization-condensation of SiO{sub 2} and Al{sub 2}O{sub 3} in the coal. We also demonstrated that the amount of SiO{sub 2} in particle size less than 0.22 {mu}m in diameter was related to the amount of fine included quartz and clay minerals in the parent coal. The primary components of particles greater than 0.76 {mu}m in diameter were SiO{sub 2} and Al{sub 2}O{sub 3}, and as the diameter of the particles decrease, the mass fractions of iron, magnesium, calcium, and phosphorus increased. However, the particle diameter at which this tendency commenced differed depending on the element. Particles between 0.22 and 0.76 {mu}m in diameter were thought to have been formed by the fragmentation and coalescence of particles in the coal and by the simultaneous condensation of volatilized elements onto other particles. 17 refs., 12 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Coke gasification: the influence and behavior of inherent catalytic mineral matter

Gasification of coke contributes to its degradation in the blast furnace. In this study, the effect of gasification on the inherent catalytic minerals in cokes and their reciprocal influence on gasification are investigated. The catalytic mineral phases identified in the cokes used in this study were metallic iron, iron sulfides, and iron oxides. Metallic iron and pyrrhotite were rapidly oxidized during gasification to iron oxide. The catalysts had a strong influence on the apparent rates at the initial stages of reaction. As gasification proceeds, their effect on the reaction rate diminishes as a result of reducing the surface contact between catalyst and carbon matrix because of carbon consumption around the catalyst particles; with extended burnout the reactivity of the coke becomes increasingly dependent on surface area. The reaction rate in the initial stages was also influenced by the particle size of the catalytic minerals; for a given catalytic iron level, the cokes whose catalytic minerals were more finely dispersed had a higher apparent reaction rate than cokes containing larger catalytic particles. Iron, sodium, and potassium in the amorphous phase did not appear to affect the reaction rate. 40 refs., 16 figs., 6 tabs.

01 COAL, LIGNITE, AND PEAT↗

Mercury capture from flue gas using palladium nanoparticle-decorated substrates as injected sorbent

Although the Clean Air Mercury Rule (CAMR) was recently vacated by the District of Columbia Court of Appeals, efficient mercury (Hg) capture is still an important topic for the coal-fired power plant industry. Several states have Hg emission regulations that are even more stringent than CAMR guidelines. All coals contain Hg, which is released during combustion. Significant research efforts have been made to capture this toxic element before it is released to the atmosphere where it can stay suspended and travel for great distances. A variety of approaches have been examined, among which the injection of sorbent materials such as powdered activated carbon (PAC) is the current method of choice. The work presented here examined the mercury capture capability of various carbon substrates decorated with metal nanoparticles when injected as sorbents. Sorbent injections were carried out in a Hg in air mixture for laboratory-scale screening and in a real flue gas at a coal-fired power plant. It was found that palladium-decorated carbon substrates showed excellent mercury capture capabilities, with total efficiencies greater than 90% in laboratory-scale tests. In the real flue gas, the total efficiency was on the order of 60%, comparable to the benchmark commercial sorbent Darco Hg-LH, a brominated PAC, although the tested adsorbents had much lower surface areas. The results of this study are presented herein. Novel mercury capture from a coal-fired flue gas was achieved using carbon substrates decorated with palladium nanoparticles. 15 refs., 7 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Emission control of mercury and sulfur by mild thermal upgrading of coal

Mercury and sulfur emissions from power plants is becoming increasingly an environmental concern. In this study, two Chinese coals from the Guizhou province and one Canadian coal from Alberta were selected to study the potential of thermal upgrading as mercury and sulfur emission control strategy prior to coal use. A low-temperature asher (LTA) and X-ray diffractometer (XRD) were used to characterize the occurrence of mercury and sulfur in coal. An experiment of mild thermal upgrading at different atmospheres was performed to explore the removal efficiencies of mercury before combustion. Our study shows that mercury is associated with different minerals in these coal samples. The correlation between mercury and sulfur is also investigated. Mercury was found to be removed effectively by mild thermal upgrading at 400{sup o}C under a 4% O{sub 2}-N{sub 2} atmosphere. An oxidizing atmosphere increased the removal of pyritic sulfur significantly at low temperatures. The mercury release rate was found to be higher under an oxidizing atmosphere than under a nitrogen atmosphere between 300 and 400{sup o}C during mild thermal upgrading. 30 refs., 9 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Physicochemical characterizations and desulfurization properties in coal combustion of three calcium and sodium industrial wastes

To recycle industrial wastes and reduce SO{sub 2} pollutant emission in coal combustion, the mineralogical compositions, porosity structures, surface morphologies, and desulfurization properties of three calcium and sodium industrial wastes were investigated via X-ray diffraction (XRD), porosimeter, scanning electron microscopy (SEM), and a fixed-bed reactor. (1) White lime mud (WLM) mainly composed of CaCO{sub 3} with Na{sub 2}O and K{sub 2}O impurities has smaller CaCO{sub 3} particles and a higher surface area than limestone. But calcined WLM has larger CaO particles and a lower surface area than limestone calcined at 1200{sup o}C for 300 s. (2) Calcium carbide residue (CCR) mainly composed of Ca(OH)2, has the highest surface area and smaller Ca(OH){sub 2} particles than the CaCO{sub 3} particles in WLM. Its surface area monotonously and dramatically decreases at 1200{sup o}C for 300 s, but the sintered CaO particles are still smaller than those in the limestone. (3) When brine sludge (BS), mainly composed of NaCl and CaCO{sub 3}, is heated at 1200{sup o}C for 300 s, the NaCl/CaO eutectic solvent facilitates the aggregation of some complex composites to form many larger particles. (4) WLM gives the highest desulfurization efficiency of 80.4% at 1000{sup o}C and 65.0% at 1100{sup o}C in coal combustion. Combined CCR and limestone give a synergistic desulfurization efficiency of 45.8% at 1200{sup o}C. BS with a molar ratio of Na/Ca at 1:15 effectively promotes the synergistic desulfurization efficiency of combined CCR and limestone to a peak of 54.9% at 1200{sup o}C. 23 refs., 10 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Hydrogen production from simulated hot coke oven gas by using oxygen-permeable ceramics

Hydrogen production from simulated hot coke oven gas (HCOG) was investigated in a BaCo{sub 0.7}Fe{sub 0.2}Nb{sub 0.1}O{sub 3-{delta}} (BCFNO) membrane reactor combined with a Ni/Mg(Al)O catalyst by the partial oxidation with toluene as a model tar compound under atmospheric pressure. The reaction results indicated that toluene was completely converted to H{sub 2} and CO in the catalytic reforming of the simulated HCOG in the temperature range from 825 to 875{sup o}C. Both thermodynamically predicated values and experimental data showed that the selective oxidation of toluene took precedence over that of CH{sub 4} in the reforming reaction. At optimized reaction conditions, the dense oxygen-permeable membrane has an oxygen permeation flux around 12.3 mL cm{sup -2} min{sup -1}, and a CH{sub 4} conversion of 86%, a CO{sub 2} conversion of 99%, a H{sub 2} yield of 88%, and a CO yield of 87% have been achieved. When the toluene and methane were reformed, the amount of H{sub 2} in the reaction effluent gas was about 2 times more than that of original H{sub 2} in simulated HCOG. The results reveal that it is feasible for hydrogen production from HCOG by reforming hydrocarbon compounds in a ceramic oxygen-permeable membrane reactor. 27 refs., 10 figs., 3 abs.

01 COAL, LIGNITE, AND PEAT↗

High-resolution transmission electron microscopy studies of graphite materials prepared by high-temperature treatment of unburned carbon concentrates from combustion fly ashes

High-resolution transmission electron microscopy (HRTEM) has been used in this work to study the microstructural (structure and microtexture) changes occurring during the high-temperature treatment of the unburned carbon concentrates from coal combustion fly ashes. Emphasis was placed on two aspects: (i) the development of graphitic carbon structures and (ii) the disordered carbon forms remaining in the graphitized samples. In addition, by coupling HRTEM with energy-dispersive spectroscopy, the transformations with the temperature of the inorganic matter (mainly iron- and silicon-based phases) of the unburned carbon concentrates were evidenced. The HRTEM results were compared to the averaged structural order of the materials as evaluated by X-ray diffraction (XRD) and Raman spectroscopy. As indicated by XRD and Raman parameters, more-ordered materials were obtained from the unburned carbon concentrates with higher mineral/inorganic matter, thus inferring the catalytic effect of some of their components. However, the average character of the information provided by these instrumental techniques seems to be inconclusive in discriminating between carbon structures with different degrees of order (stricto sensu graphite, graphitic, turbostratic, etc.) in a given graphitized unburned carbon. Unlike XRD and Raman, HRTEM is a useful tool for imaging directly the profile of the polyaromatic layers (graphene planes), thus allowing the sample heterogeneity to be looked at, specifically the presence of disordered carbon phases. 49 refs., 9 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Mercury removal from coal by leaching with SO{sub 2}

This paper is about the pretreatment of coal to remove mercury content prior to coal combustion. The minute amount of mercury in Pittsburgh No. 8 coal (0.177 ppm) was removed by flowing a gas stream containing 10% oxygen and 1000 ppm SO{sub 2} into a coal-water slurry at 30 mL/s. A total of 50 g of 35-65 mesh coal was leached each time in 500 mL of solution. The temperature was varied from 50 to 80{sup o}C and the initial solution pH varied at 5.7, 1.8, and 1.5. It was found that the mercury removal increased from 44.2% at 50{sup o}C to 88.6% at 75{sup o}C at the natural pH (5.7) and after 3 h of reaction time. The pyrite conversions were much lower than those of mercury. Both the mercury and pyrite removals increased as the pH decreased at 71{sup o}C. Mercury removal was high enough to consider the application of this technology to a commercial process. 10 refs., 11 figs.

01 COAL, LIGNITE, AND PEAT↗

Long-term calcination/carbonation cycling and thermal pretreatment for CO{sub 2} capture by limestone and dolomite

Capturing carbon dioxide is vital for the future of climate-friendly combustion, gasification, and steam-re-forming processes. Dry processes utilizing simple sorbents have great potential in this regard. Long-term calcination/carbonation cycling was carried out in an atmospheric-pressure thermogravimetric reactor. Although dolomite gave better capture than limestone for a limited number of cycles, the advantage declined over many cycles. Under some circumstances, decreasing the carbonation temperature increased the rate of reaction because of the interaction between equilibrium and kinetic factors. Limestone and dolomite, after being pretreated thermally at high temperatures (1000 or 1100{sup o}C), showed a substantial increase in calcium utilization over many calcination/carbonation cycles. Lengthening the pretreatment interval resulted in greater improvement. However, attrition was significantly greater for the pretreated sorbents. Greatly extending the duration of carbonation during one cycle was found to be capable of restoring the CO{sub 2} capture ability of sorbents to their original behavior, offering a possible means of countering the long-term degradation of calcium sorbents for dry capture of carbon dioxide. 12 refs., 12 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗