Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Laser powder bed fusion parameter estimation with k-NN

Abstract Laser powder bed fusion (L-PBF) is a technique within additive manufacturing that uses a high power density laser to build parts from fused powdered metal alloy. This technology is well equipped to produce complex parts with otherwise impossible features, such as hidden voids or lattice structures. Alongside capability, reliability and quality are key characteristics considered when choosing a manufacturing method, and these are gaining attention as this method becomes more prevalent in industry. One main indicator of a stable L-PBF process is consistent melt pool geometry, and the properties of which are likely to determine the quality of the part produced. As computing power and sensing technologies become more advanced, this melt pool geometry could be studied in real time. This work addresses the challenge by leveraging a k-nearest neighbor (k-NN) model to identify key features within melt pool imagery and predict the energy density. The k-NN model was trained on data provided by the National Institute of Standards and Technology (NIST). Data preprocessing was performed on the images to extract features that were used in the k-NN model. This approach was used to accurately infer the energy density of unseen layers within the same part. The algorithm was subsequently tested with unique scan strategies and found to reasonably estimate the energy density of different parts. A fivefold cross validation found the algorithm to be consistently predicting the class of 91.4% of the in situ melt pool images.

Jung, Patrick (ORCID:0000000267890859)↗

Superconductivity on the Verge of a Pressure-Induced Lifshitz Transition in CaFe{sub 2}As{sub 2}: an Interpretation Within the Eliashberg Theory

In a recent paper, we presented the first directional point-contact Andreev reflection spectroscopy (PCARS) measurements on CaFe{sub 2}As{sub 2} crystals under quasi-hydrostatic pressure and discussed the pressure dependence of the gaps and the critical temperature. While T{sub c} exhibits a well-known smooth dependence and a broad maximum at about 0.6 GPa, both gaps increase very sharply in a small pressure range between 0.5 and 0.6 GPa, leading to a doubling of the ratio 2Δ{sub 2}/k{sub B}T{sub c} and a quadruplication of the ratio 2Δ{sub 1}/k{sub B}T{sub c}, Δ{sub 1} and Δ{sub 2} being the small and large gap, respectively. This peculiar behavior is likely to be related to a sharp change in the lattice structure that, in turn, produces a 2D-3D topological transition in the hole-like Fermi surface sheet. In this work, we show that, within an effective three-band Eliashberg theory for the electron-spin fluctuation coupling (s± symmetry), these results can be rationalized as being due to a large increase of the electron-boson coupling, which mimics the effects of a boost mechanism for the coupling related to the underlying Lifshitz transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting Properties of LaSn{sub 3} Under Positive Hydrostatic Pressure

Superconducting properties of LaSn{sub 3} were calculated at ambient and applied positive hydrostatic pressure. The lattice structure of LaSn{sub 3} remained stable at ambient and all applied positive hydrostatic pressures due to the positive frequency of phonon dispersion plots for all modes of vibrations. The electron-phonon coupling constant (λ{sub ep}) and superconducting transition temperature (T{sub c}) show an almost linear decrease with positive hydrostatic pressure. The majority of electron‑electron interaction is mediated by acoustic modes of vibration in comparison to optical modes of vibrations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of 3d electron configurations on helium bubble formation and void swelling in concentrated solid-solution alloys

Currently, elemental specific chemical complexity is known to play a vital role in microstructure development in single-phase concentrated solid-solution alloys (SP-CSAs), including both He bubble formation and irradiation-induced void swelling. While cavity formation and evolution under ion irradiation at elevated temperature are complex nonequilibrium processes, chemical effects are revealed at the level of electrons and atoms herein in a simplified picture, using Ni and a special set of Ni-based SP-CSAs composed of 3d transition metals as model alloys. Based on Ni and the model alloys with minimized variables (e.g., atomic mass, size, and lattice structure), we report on the effects of chemically-biased energy dissipation, defect energetics, sluggish diffusion, and atomic transport on cavity formation and evolution under both self-ion Ni irradiation and He implantation. The observed difference in microstructure evolution is attributed to the effects of d electron interactions in their integrated ability to dissipate radiation energy. The exhibited impact of alloying 3d transition metals with larger differences in the outermost electron counts suggests a simple design strategy for tuning defect properties to improve radiation tolerance in structural alloys.

36 MATERIALS SCIENCE↗

Behavior of yttria-stabilized zirconia (YSZ) during laser direct energy deposition of an Inconel 625-YSZ cermet

Thermal barrier coatings (TBC) are regularly used today to protect and extend the service life of several superalloys which are extensively used in high temperature applications. The existing TBCs are typically between 0.1 to 0.5 mm in thickness, are deposited on metal substrates using plasma spray or electron beam vapor deposition, and can reduce temperatures at the substrate surface by up to 300 °C. For greater temperature reductions there is a need for thicker TBCs. The building of thick TBCs has to date been stymied by poor adhesion, and cracking during deposition. It has been suggested that a functionally graded approach may reduce the residual stresses which result in these defects. To date there have been few reports on the deposition of ceramic or cermet coatings using laser AM and none have reported on the phase stability of ceramic particles post-deposition. This article is a first report on the phase stability of ceramic particles following the compositional segregation of elements during deposition using a powder feed additive manufacturing process. Functionally graded (FG), thick TBCs (>3 mm) consisting of Inconel 625 (IN625) and yttria-partially stabilized zirconia (8YSZ) were deposited on an A516 steel substrate via laser direct energy deposition (LDED). Good interfaces were observed between the bond coat (BC) and first cermet layer and between the graded cermet layers. However, cermet layers deposited with 10 wt.% or more YSZ developed a thin layer of YSZ on the surface. The thin layer of YSZ greatly hindered additional deposition of new cermet layers. In cermet layers that did exhibit good interfaces, fine, re-solidified, YSZ particles were homogenously distributed within the Inconel 625 matrix. The YSZ particles exhibited a tetragonal lattice structure and were depleted of yttrium. In contrast, the thin YSZ layer formed on a cermet surface showed no yttrium depletion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Discrete Dendrite Dynamics Model for Epitaxial Columnar Grain Growth in Metal Additive Manufacturing with Application to Inconel

Epitaxial columnar grain growth is a prevalent microstructural feature in the additive manufacturing (AM) of metal components such as Inconel, with cubic unit cell crystal lattice structure (face centered cubic (FCC) or body centered cubic (BCC)). These columnar grains evolve from the partly molten grains in the substrate or the solidified metal. This work proposes an efficient model to simulate the competitive growth of epitaxial columnar dendritic grains. The proposed model tracks the dynamic changes in the dendrites emanating from discrete points along the solid/liquid interface of a quasi-steady melt pool (MP). These dynamic changes include convergence and divergence of growing dendrites. The model is extended to predict the microstructure of large 3D parts and experimentally validated by comparing the simulation results for laser powder bed fusion (L-PBF) and wire-arc additive manufacturing (WAAM) processes. The microstructure and pole figures are predicted for Inconel 718 samples produced by L-PBF and Inconel 740H samples produced by WAAM processes. Finally, the model predictions compare well with the observed microstructure and pole figures results for both the L-PBF and WAAM processes.

20 FOSSIL-FUELED POWER PLANTS↗

Criticality concerns of a group actinide co-crystallization separations approach to used nuclear fuel recycling

We report the co-crystallization of hexavalent actinides with uranyl nitrate hexahydrate has been established as a viable approach to achieving group actinide separation in used nuclear fuel recycle while avoiding the difficulties associated with the solvent-extraction process altogether. A preliminary neutronics safety analysis has been performed to alleviate criticality concerns associated with this group hexavalent actinide co-crystallization approach. The basic uranyl nitrate hexahydrate material compositions used are representative of used fuel found at commercial pressurized water reactors all around the U.S. This material is subsequently doped with various percentages of either typical reactor grade plutonium or with the total transuranic vector, replacing the uranium atoms in the crystal lattice structure. Infinite and effective neutron multiplication factors were calculated using the state-of-the-art Monte Carlo neutron transport code MCNP in a variety of plausible material configurations, assuming an acceptable safety limit for criticality to be an effective neutron multiplication factor less than 0.95. The results indicate that the crystal structures form a very subcritical intrinsic geometry even with six water molecules being incorporated into the crystal structure. In conclusion, the results of this research suggest that significant opportunity exists for the safe transfer of the group actinide separation approach from a laboratory to an operational scale.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Control of tripod-scheme cold-atom wavepackets by manipulating a non-Abelian vector potential

Tripod-scheme cold atoms interacting with laser beams have attracted considerable interest for their role in synthesizing effective non-Abelian vector potentials. Such effective vector potentials can be exploited to realize an all-optical imprinting of geometric phases onto matter waves. By working on carefully designed extensions of our previous work, we show that coherent lattice structure of cold-atom sub-wavepackets can be formed and that the non-Abelian Aharonov-Bohm effect can be easily manifested via the translational motion of cold atoms. We also show that by changing the frame of reference, effects due to a non-Abelian vector potential may be connected with a simple dynamical phase effect, and that under certain conditions it can be understood as an Abelian geometric phase in a different frame of reference. Results should help design better schemes for the control of cold-atom matter waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Syngas production over La 0.9 Ni y Al 11.95-y O 19-δ catalysts during C 14 -alkane partial oxidation: Effects of sulfur and polycyclic aromatic hydrocarbons

Partial oxidation studies were conducted over a series of Ni-substituted lanthanum hexaaluminate catalysts, La 0.9 Ni y Al 11.95-y O 19-δ (y = 1.0, 0.8, 0.4 and 0.2) to evaluate the effect of higher alkane, sulfur and polycyclic aromatic hydrocarbons using tetradecane (n-C 14 ), dibenzothiophene (DBT) and 1-methylnapthalene (1-MN) as model reaction compounds. XRD showed the Ni-substituted lanthanum hexaaluminate catalysts to have magnetoplumbite structure. Lattice parameters along the a,b-axis are shown to increase systematically with increasing Ni substitution. The unit cell is also shown to increase systematically with Ni substitution providing clear evidence of Ni 2+ substitution for Al 3+ in the lanthanum hexaaluminate lattice. Catalytic activity and product yields were evaluated by temperature programmed surface reaction (TPSR) using n-C 14 partial oxidation as a probe reaction. Between 750 and 900°C, H 2 and CO yields are shown to increase with increasing Ni surface sites while aromatic and olefin yields are shown to decrease. Step response experiments were performed to show the effect of 0.1 wt% 1-MN addition on catalytic activity and performance. As expected, at lower Ni substitution, thermal chemistry predominates suggesting fewer available active Ni sites. At the conditions tested, the site blocking effect is shown to be reversible at all levels of Ni substitution. Similar catalytic behaviors are observed with step response experiments to 50 ppm w/w dibenzothiophene (DBT) where site blocking is shown to produce a concomitantly greater effect on catalytic performance and active site occlusion with catalysts that have less active sites. The step response to DBT is also observed to be reversible. Post analysis of the used catalysts shows that coke deposition is greater on the catalysts with lower Ni substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-purposed Ar gas cluster ion beam processing for graphene engineering

Graphene, with unique mechanical and electrical properties, offers diverse application opportunities from beyond Moore’s nano-electronics to water filtration. However, accomplishing these relies on cleaning and processing large areas of supported and suspended graphene sheets. Here in this paper, we demonstrate the use of an Ar cluster ion beam as a versatile tool for graphene cleaning, defect engineering, and nanopore fabrication. In-situ and ex-situ characterization techniques were utilized in combination with first principles molecular dynamics, to highlight the differences in processing of the supported and suspended graphene samples. In this work, we monitor interaction of the Ar cluster ion beam with graphene as a function of ion dose with in-situ secondary ion mass spectrometry (SIMS), as well as ex-situ Raman spectroscopy measurements. Scanning transmission electron microscopy (STEM) results confirm that the Ar cluster ion beam can form nanopores in the suspended graphene; while the basal plane of graphene remains intact maintaining the lattice structure. Finally, Scanning Electron Microscopy (SEM) image analysis of the irradiated samples allows quantitative tracking of pore areas and their distribution as a function of ion dose. This study highlights the flexibility of the Ar cluster ion beam in 2D material processing, and offers insights into Ar beam interaction with graphene.

36 MATERIALS SCIENCE↗

Computational design of metamaterials with self contact

Inverse homogenization in combination with contact modeling, topology optimization and shape optimization is used to design metamaterials with optimized macroscopic response. The homogenization assumes length scale separation which allows the non-linear macroscopic behavior to be obtained by analyzing a single unit cell in a lattice structure. Self contact in the unit cell, which is modeled using a third medium contact method, is leveraged to obtain a complex homogenized response. The inverse homogenization problem is initially formulated as a topology optimization problem, where the macroscopic stress–strain behavior is tuned to our liking. However, it is well known that boundary phenomena are difficult to model in topology optimization and that interface modeling is crucial to accurately analyze contact. For that reason, the boundary representation of the topology optimized design is extracted and used as initial design in a subsequent shape optimization. The behaviors of our designs are verified by performing rigorous post-processing analyzes using conforming meshes and conventional contact formulations.

42 ENGINEERING↗

Micropolar deep material network

This study extends the Deep Material Network (DMN), a physics-informed machine learning framework, to predict the homogenized mechanical response of composite materials with micropolar (Cosserat-type) constitutive behavior. This extension incorporates microstructure-dependent size effects, enabling accurate, efficient, and size-aware predictions for composites with complex internal architectures. While traditional, direct numerical simulation micropolar models effectively capture size effects by introducing extra local degrees of freedom, they bring significant computational challenges, particularly for multiscale analyses relevant to engineering applications. The micropolar DMN developed in this paper achieves high accuracy while significantly reducing computation time compared to micropolar direct numerical simulations. This advancement enables multiscale analyses and parameter studies that were previously impractical, such as high-cycle fatigue simulations and comprehensive investigations of internal length scale effects notably in size-dependent plastic response and the optimization of lattice structures. By uniting microstructure-sensitive modeling, physics-driven learning, and scalable surrogate modeling, the micropolar DMN paves the way for accelerated material design, large-scale parametric studies, and the reliable incorporation of size-dependent effects across a wide range of engineering applications, including optimization and next-generation composite design.

36 MATERIALS SCIENCE↗

A generalized and adaptable tensor-contraction-based cluster expansion formalism for multicomponent solids

Density functional theory (DFT)-based simulations of materials have first-principles accuracy, but are very computationally expensive. For simulating various properties of multi-component alloys, the cluster expansion (CE) technique has served as the standard workaround to improve computational efficiency. However, the standard CE technique is difficult to extend to exotic and/or low-symmetry lattices, often implemented via iteration over particular cluster types, which must be enumerated per lattice structure. In this work, we introduce the tensor cluster expansion (TCE), implemented in the open-source code tce-lib, which maps correlation functions to mixed tensor contractions, eliminating the need to iterate over cluster types and additionally making the calculation of correlation functions well-suited for massively parallel architectures like GPUs. We show that local interaction energies are an immediate consequence of the TCE formalism, yielding nearly $\mathcal{O}$(1) energy difference calculations. We then use this formalism to fit CE models for the TaW and CoNiCrFeMn systems, and use these models to respectively compute the enthalpy of mixing curve and Cowley short-range order parameters, showing excellent agreement with ground truth data.

Cluster expansion↗

Nanocrystal programmable assembly beyond hard spheres (or shapes) and other (simple) potentials

Ligands are the key to almost any strategy in the assembly of programmable nanocrystals (or nanoparticles) and must be accurately considered in any predictive model. Hard Spheres (or Shapes) provide the simplest and yet quite successful approach to assembly, with remarkable sophisticated predictions verified in experiments. There are, however, many situations where hard spheres/shapes predictions fail. This prompts three important questions: In what situations should hard spheres/shapes models be expected to work? and when they do not work, Is there a general model that successfully corrects hard sphere/shape predictions? and given other successful models where ligands are included explicitly, and of course, numerical simulations, can we unify hard sphere/shape models, explicit ligand models and all atom simulations? . Further, the Orbifold Topological Model (OTM) provides a positive answer to these three questions. In this paper, I give a detailed review of OTM, describing the concept of ligand vortices and how it leads to spontaneous valence and nanoparticle “eigenshapes” while providing a prediction of the lattice structure, without fitting parameters, which accounts for many body effects not captured by (two-body) potentials. I present a thorough survey of experiments and simulations and show that, to this date, they are in full agreement with the OTM predictions. I conclude with a discussion on whether NC superlattices are equilibrium structures and some significant challenges in structure prediction.

36 MATERIALS SCIENCE↗

Proton Irradiation Study of GFR Candidate Ceramics

This work investigated the microstructural response of ZrC, ZrN, TiN, and SiC irradiated with 2.6 MeV protons at 800ºC to a single dose in the range of 1.5 to 3.0 displacement per atom (dpa), depending on the material. The change of lattice constant evaluated using HOLZ patterns is not observed and is small when measured using XRD for the irradiated samples up to 1.5 dpa for 6H-SiC, and up to 3.0 dpa for ZrC and ZrN. In comparison to Kr ion irradiation at 800ºC to 10 dpa from the previous studies, the proton-irradiated ceramics at 3.0 dpa show less irradiation damage to the lattice structure. The irradiated ZrC exhibits faulted loops which are not observed in the Kr ion irradiated sample. The irradiated ZrN shows the least microstructural change from proton irradiation. The microstructure of 6H-SiC irradiated to 3.0 dpa consists of a black dot defect type at high density.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The function of Sn(II)-apatite as a Tc immobilizing agent

Technetium-99 is a radioactive contaminant of high concern at many nuclear waste storage sites. At the U.S. Department of Energy Hanford Site, 99Tc is a component of low-activity waste (LAW) fractions of the nuclear tank waste, which are highly caustic, high ionic strength and have high concentrations of chromate. Removal of 99Tc from LAW streams would greatly benefit the site remediation process. In this study, we investigated the removal of 99Tc(VII), as pertechnetate, from deionized water (DIW) and a LAW simulant using two solid sorbents, tin (II) apatite (Sn-A) and SnCl2 through batch sorption testing and solid phase characterization. Sn-A showed higher levels of removal of Tc from both DIW and LAW simulant compared with the SnCl2. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/XEDS) and X-ray adsorption spectroscopy (XAS) of Sn-A following batch experiments in DIW showed that TcO4- is reduced to Tc(IV) on the Sn-A surface with no incorporation into the lattice structure of Sn-A. The performance of Sn-A in the LAW simulant was lowered due to a combined effect of the high alkalinity, which lead to an increased dissolution of Sn from the Sn-A, and a preference for the reduction of Cr(VI) over Tc(VII).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Relationships between experimental signatures and processing history for a variety of PuO 2 materials

The primary oxide of plutonium, PuO 2 , is a complex material due to ongoing change in lattice structure resulting from radioactive alpha decay. In addition, the element plutonium is complex, existing in various allotropes, which can influence formation of oxides due to different nucleation and growth mechanisms. The juxtaposition of these unique properties, along with formation conditions of the initial oxide, makes for PuO 2 materials with a wide variety of local and bulk experimental signatures. This work measures these signatures with X-ray diffraction and Raman spectroscopy from five different oxide materials, and relates these signatures to specific PuO 2 production and aging routes. Furthermore this information is of potential use in nuclear fuels processing and production, nuclear non-proliferation, forensics analyses, and interplanetary power sources.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗