Search NASA⌕ Search

SEARCH · Search NASA

Results for “MASS REDUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Flight Envelope Assessment of SmallSat Aerocapture Trajectories at Venus and Mars

Aerocapture is an increasingly studied orbit insertion concept for small satellite (SmallSat) missions beyond low Earth orbit (LEO). Compared to fully propulsive methods, aerocapture reduces the orbit-insertion propellant mass by approaching on a hyperbolic path and using the planetary atmosphere to reduce the vehicle’s velocity such that the final target orbit is achieved. This allows for an increase in payload mass delivered to orbit and a reduction in launch-to-orbit time. To analyze the feasibility at Venus and Mars, aerocapture flight envelope analysis is conducted by assessing the guidable trajectory space during atmospheric flight given entry conditions, vehicle properties, target parameters, and planet-dependent trajectory dispersions. The Program to Optimize Simulated Trajectories II (POST2) is used to simulate both ballistic and lifting aerocapture trajectories with SmallSat-compatible aeroshell designs. The entry flight path angle is optimized to achieve a final target orbit for lift up/down and max/min control configurations. When plotted, the resulting area between the steep and shallow trajectories forms a flight envelope with planet-dependent ±3σ atmospheric, aerodynamic, and delivery state dispersion profiles applied. The results presented in this paper show that SmallSat aerocapture is feasible for lifting aeroshell designs at Mars and Venus as well as ballistic vehicle designs at Mars.

Jack A. Joshi↗
NASA NTRS2021

Exploration Medical Capability Clinical Decision Support System Concept of Operations

The Clinical Decision Support (CDS) project supports the Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP). Specifically, the CDS project addresses the ExMC gap, Medical-701: Enhance medical capabilities within an exploration medical system. For long-duration, deep space missions, computational and data resources will play an important role in maintaining crew health, wellness and performance where the crew will need to be more self-reliant as we enter a new era in space exploration to return to the moon and explore Mars. These ambitious goals will require significant change in in-flight medical care due to constraints on mass, volume, power, crew time, skills reduction over time and medical evacuation capabilities. These constraints make it absolutely necessary to develop transformative solutions using new technologies. Unlike the current paradigm for crew health in low-Earth orbit missions that rely on constant communication with Mission Control, the deep space missions will experience communication delays and possibly, no communications for finite periods of time. Hence, crew health management will benefit from analytics’ capabilities to augment decision support. A comprehensive, multi-functional on-board clinical decision support system (CDSS) will help crews assess and diagnose conditions, decide appropriate responses, and guide the provision of tailored and evidence-based treatments, while reflecting contextual factors and constraints. The context may include present and historical data, viable diagnostic equipment, available supplies and medications, and vehicle and environmental health. Communication time with ground-based personnel is delayed or non-existent during significant portions of the mission so the crew will need to autonomously respond to health, performance and medical situations, particularly those that are unplanned. The CDSS must also provide additional capabilities as complex as training for an emergency situation while augmenting non-expert practitioner skillsets if the Crew Medical Officer (CMO) is incapacitated, and as routine as facilitating delayed communication with flight surgeons on the ground. The CDSS must connect complex issues involving health, wellness, task performance and environmental domains. Furthermore, CDSS functionality will focus on semi-autonomous and autonomous decision-making by the crew that is necessary to address challenges in executing a self-contained medical system that enables health care without assistance from ground clinical experts. The document, ExMC CDSS Architecture Recommendation, (HRP- 48032) establishes a description of the envisioned CDSS architecture. The analytics, descriptive or advanced, contained in a CDSS will interface with the integrated crew health and performance architecture that provides the appropriate data sets. The aim of the CDS project is to develop requirements for a CDSS through a series of test-bed prototype developments and demonstrations.

HRP↗
NASA NTRSDate not supplied

Volatile Abundance of Paired Lunar Troctolites and the Early Lunar Crust

Nominally anhydrous minerals (NAMs) such as plagioclase, pyroxene, and olivine can contain small amounts of water and other volatile elements, typically within crystal lattice defects. Given the volumetric abundance of NAMs, these minerals can contain a significant volatile reservoir despite their low abundances. At least one NAM is present in nearly all lunar rocks, unlike the more commonly studied volatile-bearing mineral apatite, making NAM-based hygrometry more widely applicable. NAMs are also not subject to enrichment in H due to self-fractionation of F, as is the case for apatite. Recent developments in secondary ion mass spectrometry (SIMS) techniques (e.g., the reduction of analytical background) have allowed the evaluation of volatiles in samples that were previously too low in abundance to measure. The ability to make volatile measurements in the sub-10 ppm range opens up a suite of samples where volatile-bearing phases, such as melt inclusions and apatite, are rare or entirely absent. In this study we measure the abundances of H, C, F, P, S, and Cl in plagioclase from two paired lunar troctolites to better understand the volatile inventory of the early lunar crust and its implications for the bulk Moon.

volatiles↗
NASA NTRS1980

Conceptual design study of concentrator enhanced solar arrays for space applications. Performance evaluation of 5 KW and 20 KW systems in Si and GaAs at 1 AU employing a flat plate trough concentrator

A simple, efficient and very lightweight preliminary design for a 5 KW and 20 KW BOL output concentrated array evolved and is described by drawings. The relative effectiveness of this design, as compared to an unconcentrated planar array of equal power output, was measured by comparing power to mass performance of and the solar cell area required by each. Improvements in power to mass performance as high as 42% together with array area size reduction of 57% are possible in GaAs systems. By contrast, when the same concentrator design is applied to silicon systems, no improvement in power to mass can be obtained although array area reductions as high as 35% are obtainable.

Source record↗
NASA NTRS1996

Soleus Fiber Force and Maximal Shortening Velocity After Non-Weight Bearing with Intermittent Activity

This study examined the effectiveness of intermittent weight bearing (IWB) as a countermeasure to non-weight-bearing (NWB)-induced alterations in soleus type 1 fiber force (in mN), tension (P(sub o); force per fiber cross-sectional area in kN/sq m), and maximal unloaded shortening velocity (V(sub o), in fiber lengths/s). Adult rats were assigned to one of the following groups: normal weight bearing (WB), 14 days of hindlimb NWB (NWB group), and 14 days of hindlimb NWB with IWB treatments (IWB group). The IWB treatment consisted of four 10-min periods of standing WB each day. Single, chemically permeabilized soleus fiber segments were mounted between a force transducer and position motor and were studied at maximal Ca(2+) activation, after which type 1 fiber myosin heavy-chain composition was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. NWB resulted in a loss in relative soleus mass (-45%), with type 1 fibers displaying reductions in diameter (-28%) and peak isometric force (-55%) and an increase in V(sub o) (+33%). In addition, NWB induced a 16% reduction in type 1 fiber P., a 41% reduction in type 1 fiber peak elastic modulus [E(sub o), defined as ((delta)force/(delta)length x (fiber length/fiber cross-sectional area] and a significant increase in the P(sub o)/E(sub o) ratio. In contrast to NWB, IWB reduced the loss of relative soleus mass (by 22%) and attenuated alterations in type 1 fiber diameter (by 36%), peak force (by 29%), and V(sub o)(by 48%) but had no significant effect on P(sub o), E(sub o) or P(sub o)/E(sub o). These results indicate that a modest restoration of WB activity during 14 days of NWB is sufficient to attenuate type 1 fiber atrophy and to partially restore type 1 peak isometric force and V(sub o) to WB levels. However, the NWB-induced reductions in P(sub o) and E(sub o) which we hypothesize to be due to a decline in the number and stiffness of cross bridges, respectively, are considerably less responsive to this countermeasure treatment.

Widrick, Jeffrey J.↗
NASA NTRS2021

Seasonal Glacier and Snow Loading in Svalbard Recovered from Geodetic Observations

We processed time series from seven Global Navigation Satellite System (GNSS) stations and one Very Long Baseline Interferometry (VLBI) station in Svalbard. The goal was to capture the seasonal vertical displacements caused by elastic response of variable mass load due to ice and snow accumulation. We found that estimates of the annual signal in different GNSS solutions disagree by more than 3 mm which makes geophysical interpretation of raw GNSS time series problematic. To overcome this problem, we have used an enhanced Common Mode (CM) filtering technique. The time series are differentiated by the time series from remote station BJOS with known mass loading signals removed a priori. Using this technique, we have achieved a substantial reduction of the differences between the GNSS solutions. We have computed mass loading time series from a regional Climatic Mass Balance (CMB) and snow model that provides the amount of water equivalent at a 1 km resolution with a time step of 7 days. We found that the entire vertical loading signal is present in data of two totally independent techniques at a statistically significant level of 95%. This allowed us to conclude that the remaining errors in vertical signal derived from the CMB model are less than 0.2 mm at that significance level. Refining the land water storage loading model with a CMB model resulted in a reduction of the annual amplitude from 2:1 mm to 1:1 mm in the CM filtered time series, while it had only a marginal impact on raw time series. This provides a strong evidence that CM filtering is essential for revealing local periodic signals when a millimetre level of accuracy is required.

H P Kierulf↗
NASA NTRS1992

Synergistic use of high and low thrust propulsion systems for piloted missions to Mars

The use of high thrust, relatively low specific impulse systems, such as chemical or nuclear thermal propulsion, in conjunction with low thrust, high specific impulse nuclear electric propulsion (NEP) was considered for a representative piloted Mars mission. It was concluded that the single burn option in an all-propulsive mission scenario does not yield a significant advantage in reduced trip time for reasonable masses. The multiple burn option allows significant reductions in trip time relative to the NEP system, and may provide a performance advantage over nuclear thermal propulsion, depending upon the system assumptions. The combined systems serve to reduce high thrust systems' sensitivity to mission opportunity. It is considered that 5 kg/kWe systems can provide significant improvements in mass and trip time over the single systems at power levels of 5 to 10 MWe.

Gilland, James H.↗
NASA NTRS2018

Needs and Opportunities in the Development of Advanced Materials and Manufacturing Methods for Future Long-Duration Human Space Exploration

Weight, functionality, and sustainability are all critical concerns for future, long-duration, human exploration of space. Exploration missions will be mass-limited, since the amount of supplies and instruments that future astronauts will be able to take with them will be limited by launch vehicle and spacecraft mass and efficiency. Astronauts will need to have the capability to repair or replace worn-out or broke hardware and produce new components to be able to function for long periods at locations far-removed from Earth. Ultra-lightweight, multifunctional materials will be required to enable significant reductions in launch vehicle, spacecraft, and habitat mass in order to maximize payload. "Mass-less Exploration" concepts must be developed that will recycle materials and waste and convert available planetary materials into new feedstock materials and utilize in-space additive manufacturing to use these materials to produce the

composites↗
NASA NTRS1981

A research program to reduce interior noise in general aviation airplanes. Influence of depressurization and damping material on the noise reduction characteristics of flat and curved stiffened panels

Some 20 x 20 aluminum panels were studied in a frequency range from 20 Hz to 5000 Hz. The noise sources used were a swept sine wave generator and a random noise generator. The effect of noise source was found to be negligible. Increasing the pressure differential across the panel gave better noise reduction below the fundamental resonance frequency due to an increase in stiffness. The largest increase occurred in the first 1 psi pressure differential. The curved, stiffened panel exhibited similar behavior, but with a lower increase of low frequency noise reduction. Depressurization on these panels resulted in decreased noise reduction at higher frequencies. The effect of damping tapes on the overall noise reduction values of the test specimens was small away from the resonance frequency. In the mass-law region, a slight and proportional improvement in noise reduction was observed by adding damping material. Adding sound absorbtion material to a panel with damping material beneficially increased noise reduction at high frequencies.

Navaneethan, R.↗
NASA NTRS2008

Impact of Azimuthally Controlled Fluidic Chevrons on Jet Noise

The impact of azimuthally controlled air injection on broadband shock noise and mixing noise for single and dual stream jets was investigated. The single stream experiments focused on noise reduction for low supersonic jet exhausts. Dual stream experiments included high subsonic core and fan conditions and supersonic fan conditions with transonic core conditions. For the dual stream experiments, air was injected into the core stream. Significant reductions in broadband shock noise were achieved in a single jet with an injection mass flow equal to 1.2% of the core mass flow. Injection near the pylon produced greater broadband shock noise reductions than injection at other locations around the nozzle periphery. Air injection into the core stream did not result in broadband shock noise reduction in dual stream jets. Fluidic injection resulted in some mixing noise reductions for both the single and dual stream jets. For subsonic fan and core conditions, the lowest noise levels were obtained when injecting on the side of the nozzle closest to the microphone axis.

Henderson, Brenda S.↗
NASA NTRS2012

Logistics Reduction and Repurposing Beyond Low Earth Orbit

All human space missions, regardless of destination, require significant logistical mass and volume that is strongly proportional to mission duration. Anything that can be done to reduce initial mass and volume of supplies or reuse items that have been launched will be very valuable. Often, the logistical items require disposal and represent a trash burden. Logistics contributions to total mission architecture mass can be minimized by considering potential reuse using systems engineering analysis. In NASA's Advanced Exploration Systems "Logistics Reduction and Repurposing Project," various tasks will reduce the intrinsic mass of logistical packaging, enable reuse and repurposing of logistical packaging and carriers for other habitation, life support, crew health, and propulsion functions, and reduce or eliminate the nuisance aspects of trash at the same time. Repurposing reduces the trash burden and eliminates the need for hardware whose function can be provided by use of spent logistical items. However, these reuse functions need to be identified and built into future logical systems to enable them to effectively have a secondary function. These technologies and innovations will help future logistics systems to support multiple exploration missions much more efficiently.

Ewert, Michael K.↗
NASA NTRS1991

Synergistic use of high and low thrust propulsion systems for piloted missions to Mars

The use of high-thrust, relatively-low-specific-impulse systems, such as chemical or nuclear thermal propulsion, in conjunction with low thrust, high-specific-impulse nuclear electric propulsion (NEP), has been considered for a representative piloted Mars mission. It is concluded that the single-burn option in an all-propulsive mission scenario does not yield a significant performance advantage in reduced trip time for reasonable masses. The multiple burn option allows significant reductions in trip time relative to the NEP system, and may provide a performance advantage over nuclear thermal propulsion depending upon the system assumptions. The combined systems serve to reduce NEP power requirements for fast trip times, and to reduce high thrust systems' sensitivity to mission opportunity. It is considered that 5 kg/kWe systems can provide significant improvements in mass and trip time over the single systems at power levels of 5 to 10 MWe.

Gilland, James H.↗
NASA NTRS2005

Broadband Noise Reduction of a Low-Speed Fan Noise Using Trailing Edge Blowing

An experimental proof-of-concept test was conducted to demonstrate reduction of rotor-stator interaction noise through the use of rotor-trailing edge blowing. The velocity deficit from the viscous wake of the rotor blades was reduced by injecting air into the wake from a continuous trailing edge slot. Hollow blades with interior guide vanes create flow channels through which externally supplied air flows from the blade root to the trailing edge. A previous paper documented the substantial tonal reductions of this Trailing Edge Rotor Blowing (TERB) fan. This report documents the broadband characteristics of TERB. The Active Noise Control Fan (ANCF), located at the NASA Glenn Research Center, was used as the proof-of-concept test bed. Two-component hotwire data behind the rotor, unsteady surface pressures on the stator vane, and farfield directivity acoustic data were acquired at blowing rates of 1.1, 1.5, and 1.8 percent of the total fan mass flow. The results indicate a substantial reduction in the rotor wake turbulent velocity and in the stator vane unsteady surface pressures. Based on the physics of the noise generation, these indirect measurements indicate the prospect of broadband noise reduction. However, since the broadband noise generated by the ANCF is rotor-dominated, any change in the rotor-stator interaction broadband noise levels is barely distinguishable in the farfield measurements.

Sutliff, Daniel L.↗
NASA NTRS1989

Earth orbit laser systems

At the state-of-the-art efficiencies, both nuclear and solar-driven systems require equal masses for the same laser powers in the 50 to 500 MW range, typically 3,700 tons for a 100-MW thruster. Future efficiency improvement of solar panel and laser diode array will realize significant reduction (by a factor of 3) in system masses. Beaming time for laser propulsion is relatively short and other missions should be considered for increasing the system duty cycle.

Lee, Ja H.↗
NASA NTRS2004

Ultralight Linerless Composite Tanks for In-Space Applications

NASA missions are becoming increasingly more demanding of propulsion capability, driving the mass of propulsion systems higher, even as the science mass of electronics is reduced. Typically, the propulsion tank is the single largest highest dry mass item of an in-space propulsion system. Ultralight linerless composite tanks (ULLCTs) promise to achieve the efficiencies that will make future propulsion systems viable and minimize propulsion system mass growth. ULLCTS may offer up to a 25 percent weight reduction compared to conventional metal lined composite overwrapped tanks, allowing increased reactant storage and/or reduced launch mass. For successful design of such a tank, the composite shell itself is required to provide an integral impermeable barrier, in addition to carrying the pressure and environmental loads for in-space propulsion. Significant materials technologies are required to achieve the microcrack resistance of the composites in order to contain small molecule gases such as helium (He). The goal is to develop a material that can limit the leakage rate of gaseous He to 10(exp -4) scc/sec at 1% biaxial strain level. The current paper details an integrated systematic approach to developing novel composite materials that can meet such performance requirements. It also explains how micromechanical models and material testing can be combined to define material performance indicators critical for designing an ULLCT, such as the material's resistance to microcracking and permeability.

lightweight propellant tanks↗
NASA NTRS2010

Fifty Years of Fluidic Injection for Jet Noise Reduction

The paper reviews 50 years of research investigating jet noise reduction through fluidic injection. Both aqueous and gaseous injection concepts for supersonic and subsonic jet exhausts are discussed. Aqueous injection reduces jet noise by reducing main jet temperature through evaporation and main jet velocity through momentum transfer between water droplets and the main jet. In the launch vehicle environment where large quantities of fluid do not have to be carried with the vehicle, water injection is very effective at reducing excess overpressures. For in-flight use, aqueous injection is problematic as most studies show that either large quantities of water or high injection pressures are required to achieve noise reduction. The most effective noise reduction injection systems require water pressures above 2000 kPa (290 psi) and water-to-mainjet mass flow rates above 10% to achieve overall sound pressure level reductions of roughly 6 dB in the peak jet noise direction. Injection at lower pressure (roughly 1034 kPa or 150 psi) has resulted in a 1.6 EPNdb reduction in effective perceived noise level. Gaseous injection reduces noise through jet plume modifications resulting from the introduction of streamwise vorticity in the main jet. In subsonic single-stream jets, air injection usually produces the largest overall sound pressure level reductions (roughly 2 dB) in the peak jet noise direction. In dual-stream jets, properly designed injection systems can reduce overall sound pressure levels and effective perceived noise levels but care must be taken to choose injector designs that limit sound pressure level increases at high frequencies. A reduction of 1.0 EPNdB has been achieved with injection into the fan and core streams. However, air injection into dual-stream subsonic jets has received little attention and the potential for noise reduction is uncertain at this time. For dual-stream supersonic jets, additional research needs to be conducted to determine if reductions can be achieved with injection pressures available from current aircraft engines. 1.

Henderson, Brenda↗
NASA NTRS1988

Mass killings and detection of impacts

Highly energetic bolide impacts occur and their flux is known. For larger bodies the energy release is greater than for any other short-term global phenomenon. Such impacts produce or release a large variety of shock induced changes including major atmospheric, sedimentologic, seismic and volcanic events. These events must necessarily leave a variety of records in the stratigraphic column, including mass killings resulting in major changes in population density and reduction or extinction of many taxonomic groups, followed by characteristic patterns of faunal and flora replacement. Of these effects, mass killings, marked by large-scale loss of biomass, are the most easily detected evidence in the field but must be manifest on a near-global scale. Such mass killings that appear to be approximately synchronous and involve disappearance of biomass at a bedding plane in many sedimentologically independent sections globally suggest a common cause and probable synchroneity. Mass killings identify an horizon which may be examined for evidence of cause. Geochemical markers may be ephemeral and absence may not be significant. There appears to be no reason why ongoing phenomena such as climate and sea-level changes are primary causes of anomolous episodic events.

Mclaren, Digby J.↗
NASA NTRS1984

Influence of spaceflight on erythrokinetics in man

It has been found in connection with American and Soviet manned space missions that a reduction in the circulating red blood cell mass (RCM) is a result of the effect of space flight on the human hematological system. An experiment conducted during the 10-day Spacelab 1 mission in November 1983 was designed to measure factors involved in the control of erythrokinetics which might be altered after exposure to microgravity. In this experiment a decrement in RCM approximately equal to that observed in crewmen returning from Apollo flights of similar duration (7) was measured. Erythropoietin decreased in flight in all crew members. The lack of significant change in erythropoietin with a significant decrease in reticulocyte number and a decrease of about 1 percent per day in mean RCM suggests that inhibition of erythropoiesis ms not the primary or only cause of the inflight RCM reduction.

Leach, C. S.↗