Search NASA⌕ Search

SEARCH · Search NASA

Results for “Matrix Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Search for the Standard Model Higgs Boson associated with a W Boson using Matrix Element Technique in the CDF detector at the Tevatron

In this thesis a direct search for the Standard Model Higgs boson production in association with a W boson at the CDF detector in the Tevatron is presented. This search contributes predominantly in the region of low mass Higgs region, when the mass of Higgs boson is less than about 135 GeV. The search is performed in a final state where the Higgs boson decays into two b quarks, and the W boson decays leptonically, to a charged lepton (it can be an electron or a muon) and a neutrino. This work is organized as follows. Chapter 2 gives an overview of the Standard Model theory of particle physics and presents the SM Higgs boson search results at LEP, and the Tevatron colliders, as well as the prospects for the SM Higgs boson searches at the LHC. The dataset used in this analysis corresponds to 4.8 fb -1 of integrated luminosity of p$\bar{p}$ collisions at a center of mass energy of 1.96 TeV. That is the luminosity acquired between the beginning of the CDF Run II experiment, February 2002, and May 2009. The relevant aspects, for this analysis, of the Tevatron accelerator and the CDF detector are shown in Chapter 3. In Chapter 4 the particles and observables that make up the WH final state, electrons, muons, E T , and jets are presented. The CDF standard b-tagging algorithms to identify b jets, and the neural network flavor separator to distinguish them from other flavor jets are also described in Chapter 4. The main background contributions are those coming from heavy flavor production processes, such as those coming from Wbb, Wcc or Wc and tt. The signal and background signatures are discussed in Chapter 5 together with the Monte CArlo generators that have been used to simulate almost all the events used in this thesis. WH candidate events have a high-p T lepton (electron or muon), high missing transverse energy, and two or more than two jets in the final state. Chapter 6 describes the event selection applied in this analysis and the method used to estimate the background contribution. The Matrix Element method, that was successfully used in the single top discovery analysis and many other analyses within the CDF collaboration, is the multivariate technique used in this thesis to discriminate signal from background events. With this technique is possible to calculate a probability for an event to be classified as signal or background. These probabilities are then combined into a discriminant function called the Event Probability Discriminant, EPD, which increases the sensitivity of the WH process. This method is described in detail in Chapter 7. As no evidence for the signal has been found, the results obtained with this work are presented in Chapter 8 in terms of exclusion regions as a function of the mass of the Higgs boso, taking into account the full systematics. The conclusions of this work to obtain the PhD are presnted in Chapter 9.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ray Tracing through the Edge Focusing of Rectangular Benders and an Improved Model for the Los Alamos Proton Storage Ring

Particle ray tracing through simulated 3D magnetic fields was executed to investigate the effective quadrupole strength of the edge focusing of the rectangular bending magnets in the Los Alamos Proton Storage Ring (PSR). The particle rays receive a kick in the edge field of the rectangular dipole. A focal length may be calculated from the particle tracking and related to the fringe field integral (FINT) model parameter. This tech note introduces the baseline lattice model of the PSR and motivates the need for an improvement in the baseline model's vertical tune prediction, which differs from measurement by .05. An improved model of the PSR is created by modifying the fringe field integral parameter to those suggested by the ray tracing investigation. This improved model is then verified against measurement at the nominal PSR operating set point and at set points far away from the nominal operating conditions. Lastly, Linear Optics from Closed Orbits (LOCO) is employed in an orbit response matrix method for model improvement to verify the quadrupole strengths of the improved model.

Accelerator Design, Technology, and Operations↗

Spontaneous left-right symmetry breaking in supersymmetric models with only Higgs doublets

We studied the question of parity breaking in a supersymmetric left-right model, in which the left-right symmetry is broken with Higgs doublets (carrying B-L={+-}1). Unlike the left-right symmetric models with triplet Higgs scalars (carrying B-L={+-}2), in this model it is possible to break parity spontaneously by adding a parity-odd singlet. We then discussed how neutrino mass of type-III seesaw can be invoked in this model by adding extra fermion singlets. We considered simple forms of the mass matrices that are consistent with the unification scheme and demonstrate how they can reproduce the required neutrino mixing matrix. In this model, the baryon asymmetry of the Universe is generated via leptogenesis. The required mass scales in the model are then found to be consistent with the gauge coupling unification.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deformation effect on total reaction cross sections for neutron-rich Ne isotopes

The isotope dependence of measured reaction cross sections in the scattering of {sup 28-32}Ne isotopes from a {sup 12}C target at 240 MeV/nucleon is analyzed by the double-folding model with the Melbourne g matrix. The density of the projectile is calculated by the mean-field model with the deformed Woods-Saxon potential. The deformation is evaluated by antisymmetrized molecular dynamics. The deformation of the projectile enhances calculated reaction cross sections to the measured values.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

One-dimensional Lieb-Liniger Bose gas as nonrelativistic limit of the sinh-Gordon model

The repulsive Lieb-Liniger model can be obtained as the nonrelativistic limit of the sinh-Gordon model: all physical quantities of the latter model (S-matrix, Lagrangian, and operators) can be put in correspondence with those of the former. We use this mapping, together with the thermodynamical Bethe ansatz equations and the exact form factors of the sinh-Gordon model, to set up a compact and general formalism for computing the expectation values of the Lieb-Liniger model both at zero and finite temperatures. The computation of one-point correlators is thoroughly detailed and when possible compared with known results in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomistic k ⋅ p theory

Pseudopotentials, tight-binding models, and k ⋅ p theory have stood for many years as the standard techniques for computing electronic states in crystalline solids. Here, we present the first new method in decades, which we call atomistic k ⋅ p theory. In its usual formulation, k ⋅ p theory has the advantage of depending on parameters that are directly related to experimentally measured quantities, however, it is insensitive to the locations of individual atoms. We construct an atomistic k ⋅ p theory by defining envelope functions on a grid matching the crystal lattice. The model parameters are matrix elements which are obtained from experimental results or ab initio wave functions in a simple way. This is in contrast to the other atomistic approaches in which parameters are fit to reproduce a desired dispersion and are not expressible in terms of fundamental quantities. This fitting is often very difficult. We illustrate our method by constructing a four-band atomistic model for a diamond/zincblende crystal and show that it is equivalent to the sp{sup 3} tight-binding model. We can thus directly derive the parameters in the sp{sup 3} tight-binding model from experimental data. We then take the atomistic limit of the widely used eight-band Kane model and compute the band structures for all III–V semiconductors not containing nitrogen or boron using parameters fit to experimental data. Our new approach extends k ⋅ p theory to problems in which atomistic precision is required, such as impurities, alloys, polytypes, and interfaces. It also provides a new approach to multiscale modeling by allowing continuum and atomistic k ⋅ p models to be combined in the same system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulating the Effect of Fracture Connectivity on Repository Performance with GDSA Framework - 18589

This work examines the possible migration of radionuclides from a deep geologic nuclear waste repository sited in fractured crystalline host rock. The key safety concern is the potential effect on waste isolation of the inter-connectivity of the fracture network, which is primarily established by the temporal evolution of the temperature and stress fields at the time of original rock intrusion and cooling. Two end members are considered in these simulations, one with a high degree of connectivity to the biosphere, such that advective transport through the fracture and fault network controls radionuclide migration, and the other with a low degree of connectivity, such that slow diffusive transport through the crystalline rock matrix is the controlling process for radionuclide migration to the biosphere. Both end members have several areally extensive, high-transmissivity deformation zones, whose distance to the repository is an important factor for waste isolation capability. Uncertainties in fracture properties (transmissivity, orientation, radius) and fracture distribution also give rise to uncertainty in waste isolation capability (i.e., the overall connectivity of the repository with the surface biosphere). These types of natural system uncertainties are generally present in any geologic site-characterization program and thus represent an important factor in assessing repository performance in hard rock environments. The waste considered in these simulations are spent fuel rod assemblies from the U.S. commercial nuclear reactor fleet. Thermal output of the waste must be considered in the simulations and can influence the rate and timing of waste package failure, waste form degradation, and fluid flux due to thermal expansion around the repository horizon. To achieve a high-fidelity representation of radionuclide transport in fractures and rock matrix, combined with thermal energy transport and fluid flow in fractures and matrix, the mathematical model is solved numerically in a parallel high-performance computing (HPC) environment on a finite volume unstructured grid consisting of approximately 5 million cells, using Geologic Disposal Safety Assessment (GDSA) Framework (https://pa.sandia.gov), an open-source performance assessment tool for deep underground disposal of nuclear waste. GDSA Framework uses PFLOTRAN to solve the balance equations on a three-dimensional grid with heterogeneous properties, using multiple processors in a parallel configuration based on domain decomposition. The fracture networks in these simulations are originally generated as discrete fracture networks (DFNs), which are sets of two-dimensional planes distributed in a three-dimensional domain. The method used in GDSA Framework maps the stochastically generated DFN to an equivalent continuous porous medium (ECPM) domain that allows for the simulation of coupled heat flow, fluid flow, and radionuclide transport, including heat conduction through the matrix of the fractured rock, which is a process not easily modeled in a DFN representation. Computational efficiency is also greatly enhanced using the ECPM method, allowing for a realistic representation and analysis of uncertainties in a multi-realization performance assessment of a deep geologic repository. The effect of fracture connectivity on the waste isolation safety function, as brought to light by these GDSA Framework simulations, points to the importance of including a realistic representation of uncertainties in fracture properties and distribution (effectively, uncertainty in spatial heterogeneity) in repository safety assessment simulations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Generalized quark transversity distribution of the pion in chiral quark models

The transversity generalized parton distributions (tGPDs) of the pion, involving matrix elements of the tensor bilocal quark current, are analyzed in chiral quark models. We apply the nonlocal chiral models involving a momentum-dependent quark mass, as well as the local Nambu-Jona-Lasinio with the Pauli-Villars regularization to calculate the pion tGPDs, as well as related quantities following from restrained kinematics, evaluation of moments, or taking the Fourier-Bessel transforms to the impact-parameter space. The obtained distributions satisfy the formal requirements, such as proper support and polynomiality, following from Lorentz covariance. We carry out the leading-order QCD evolution from the low quark-model scale to higher lattice scales, applying the method of Kivel and Mankiewicz. We evaluate several lowest-order generalized transversity form factors, accessible from the recent lattice QCD calculations. These form factors, after evolution, agree properly with the lattice data, in support of the fact that the spontaneously broken chiral symmetry is the key element also in the evaluation of the transversity observables.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simulation for Wind Turbine Generators: With FAST and MATLAB-Simulink Modules

This report presents the work done to develop generator and gearbox models in the Matrix Laboratory (MATLAB) environment and couple them to the National Renewable Energy Laboratory's Fatigue, Aerodynamics, Structures, and Turbulence (FAST) program. The goal of this project was to interface the superior aerodynamic and mechanical models of FAST to the excellent electrical generator models found in various Simulink libraries and applications. The scope was limited to Type 1, Type 2, and Type 3 generators and fairly basic gear-train models. Future work will include models of Type 4 generators and more-advanced gear-train models with increased degrees of freedom. As described in this study, implementation of the developed drivetrain model enables the software tool to be used in many ways. Several case studies are presented as examples of the many types of studies that can be performed using this tool.

17 WIND ENERGY↗

A matrix dependent/algebraic multigrid approach for extruded meshes with applications to ice sheet modeling

A multigrid method is proposed that combines ideas from matrix dependent multigrid for structured grids and algebraic multigrid for unstructured grids. It targets problems where a three-dimensional mesh can be viewed as an extrusion of a two-dimensional, unstructured mesh in a third dimension. Our motivation comes from the modeling of thin structures via finite elements and, more specifically, the modeling of ice sheets. Extruded meshes are relatively common for thin structures and often give rise to anisotropic problems when the thin direction mesh spacing is much smaller than the broad direction mesh spacing. Within our approach, the first few multigrid hierarchy levels are obtained by applying matrix dependent multigrid to semicoarsen in a structured thin direction fashion. After sufficient structured coarsening, the resulting mesh contains only a single layer corresponding to a two-dimensional, unstructured mesh. Algebraic multigrid can then be employed in a standard manner to create further coarse levels, as the anisotropic phenomena is no longer present in the single layer problem. The overall approach remains fully algebraic, with the minor exception that some additional information is needed to determine the extruded direction. Furthermore, this facilitates integration of the solver with a variety of different extruded mesh applications.

97 MATHEMATICS AND COMPUTING↗

First measurement in a magnetic confinement fusion experiment of the H 3 + H 3 → He 5 + n intermediate two-body resonant reaction

We report on the first experimental measurements made at a magnetic confinement fusion device of the tritium(T)-tritium(T) reaction T + T → He 4 + 2 n indicating the presence of the intermediate two-body resonant reaction T + T → He 5 + n . During the second deuterium-tritium campaign (DTE2) at the Joint European Torus, measurements of fusion plasmas with high tritium concentrations, n T / ( n T + n D ) ≈ 0.99 , heated with tritium neutral beam injection, were performed using the neutron time-of-flight (TOF) spectrometer TOFOR. We detect a peak in the neutron emission TOF spectrum consistent with the two-body resonant reaction. The TT neutron emission energy spectrum is modeled using an R -matrix framework where the distributions of the most likely model parameters given our experimental TOF data are determined utilizing a Markov chain Monte Carlo approach. We compare our best estimate of the T + T neutron emission energy spectrum with results obtained at inertial confinement fusion experiments at the OMEGA facility and find a spectral shape that is consistent with the energy dependency in the neutron spectrum observed at OMEGA. Published by the American Physical Society 2024

Physics↗

Topological terms with qubit regularization and relativistic quantum circuits

Qubit regularization provides a rich framework to explore quantum field theories. The freedom to choose how the important symmetries of the theory are embedded in the qubit regularization scheme allows us to construct new lattice models with rich phase diagrams. Some of the phases can contain topological terms which lead to critical phases. In this work we introduce and study the SU(3)-F qubit regularization scheme to embed the SO(3) spin-symmetry. We argue that qubit models in this regularization scheme contain several phases including a critical phase which describes the k = 1 Wess-Zumino-Witten (WZW) conformal field theory (CFT) at long distances, and two massive phases one of which is trvially gapped and the other which breaks the lattice translation symmetry. We construct a simple space-time Euclidean lattice model with a single coupling U and study it using the Monte Carlo method. We show the model has a critical phase at small U and a trivially massive phase at large U with a first order transition separating the two. Another feature of our model is that it is symmetric under space-time rotations, which means the temporal and spatial lattice spacing are connected to each other. The unitary time evolution operator obtained by a Wick rotation of the transfer matrix of our model can help us compute the physics of the k = 1 WZW CFT in real time without the need for tuning the temporal lattice spacing to zero. We use this idea to introduce the concept of a relativistic quantum circuit on a discrete space-time lattice.

Bhattacharya, Tanmoy↗

Architecture-Aware Models of AI Engines for High-Performance Matrix Matrix Multiplication

The AI Engine (AIE) architecture, available in systems from mobile SoCs to server-class FPGAs, aims to efficiently execute AI/ML tasks through a two-dimensional array of compute tiles. Previous work on AIEs has explored different approaches to mapping computation across spatial arrays, but the compute kernel running on each tile has not been the focus. Additionally, the AIE-ML architecture introduces memory tiles and omits programmable logic, requiring new approaches to staging and moving data throughout the array. In this work we update analytical models developed for CPUs to produce the design of high performance kernels while introducing new model considerations such as memory structure, throughput, and latency as required by the AIE hardware. We evaluate our models by developing AIE-ML kernels for matrix multiplication in low-precision data types showing performance up to 95% of compute peak for the kernel when data resides in local memory and above 90% of compute peak when data resides in main memory.

Binder, Elliott D. [Carnegie Mellon University, Pi↗

Crystal Plasticity Model of Reactor Pressure Vessel Embrittlement in GRIZZLY

The integrity of reactor pressure vessels (RPVs) is of utmost importance to ensure safe operation of nuclear reactors under extended lifetime. Microstructure-scale models at various length and time scales, coupled concurrently or through homogenization methods, can play a crucial role in understanding and quantifying irradiation-induced defect production, growth and their influence on mechanical behavior of RPV steels. A multi-scale approach, involving atomistic, meso- and engineering-scale models, is currently being pursued within the GRIZZLY project to understand and quantify irradiation-induced embrittlement of RPV steels. Within this framework, a dislocation-density based crystal plasticity model has been developed in GRIZZLY that captures the effect of irradiation-induced defects on the flow stress behavior and is presented in this report. The present formulation accounts for the interaction between self-interstitial loops and matrix dislocations. The model predictions have been validated with experiments and dislocation dynamics simulation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

On the intrinsic diversity of type II-plateau supernovae

Hydrogen-rich Type II-Plateau supernovae (SNe) exhibit correlations between the plateau luminosity L{sub pl}, the nickel mass M{sub Ni}, the explosion energy E{sub exp}, and the ejecta mass M{sub ej}. Using our global, self-consistent, multi-band model of nearby well-observed SNe, we find that the covariances of these quantities are strong and that the confidence ellipsoids are oriented in the direction of the correlations, which reduces their significance. By proper treatment of the covariance matrix of the model, we discover a significant intrinsic width to the correlations between L{sub pl}, E{sub exp} and M{sub Ni}, where the uncertainties due to the distance and the extinction dominate. For fixed E{sub exp}, the spread in M{sub Ni} is about 0.25 dex, which we attribute to the differences in the progenitor internal structure. We argue that the effects of incomplete γ-ray trapping are not important in our sample. Similarly, the physics of the Type II-Plateau SN light curves leads to inherently degenerate estimates of E{sub exp} and M{sub ej}, which makes their observed correlation weak. Ignoring the covariances of SN parameters or the intrinsic width of the correlations causes significant biases in the slopes of the fitted relations. Our results imply that Type II-Plateau SN explosions are not described by a single physical parameter or a simple one-dimensional trajectory through the parameter space, but instead reflect the diversity of the core and surface properties of their progenitors. We discuss the implications for the physics of the explosion mechanism and possible future observational constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

Bounds on the number of bound states in the transfer matrix spectrum for some weakly correlated lattice models

We consider the interaction of particles in weakly correlated lattice quantum field theories. In the imaginary time functional integral formulation of these theories there is a relative coordinate lattice Schroedinger operator H which approximately describes the interaction of these particles. Scalar and vector spin, QCD and Gross-Neveu models are included in these theories. In the weakly correlated regime H=H{sub o}+W where H{sub o}=-{gamma}{Delta}{sub l}, 0 < {gamma} Much-Less-Than 1 and {Delta}{sub l} is the d-dimensional lattice Laplacian: {gamma}={beta}, the inverse temperature for spin systems and {gamma}={kappa}{sup 3} where {kappa} is the hopping parameter for QCD. W is a self-adjoint potential operator which may have non-local contributions but obeys the bound Double-Vertical-Line W(x, y) Double-Vertical-Line Less-Than-Or-Slanted-Equal-To cexp ( -a( Double-Vertical-Line x Double-Vertical-Line + Double-Vertical-Line y Double-Vertical-Line )), a large: exp-a={beta}/{beta}{sub o}{sup (1/2)}({kappa}/{kappa}{sub o}) for spin (QCD) models. H{sub o}, W, and H act in l{sub 2}(Z{sup d}), d Greater-Than-Or-Slanted-Equal-To 1. The spectrum of H below zero is known to be discrete and we obtain bounds on the number of states below zero. This number depends on the short range properties of W, i.e., the long range tail does not increase the number of states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Open quantum systems and random matrix theory

A simple model for open quantum systems is analyzed with RMT. The system is coupled to the continuum in a minimal way. In this paper we see the effect of opening the system on the level statistics, in particular the level spacing, width distribution and Δ{sub 3}(L) statistic are examined as a function of the strength of this coupling. The usual super-radiant state is observed, and it is seen that as it is formed, the level spacing and Δ{sub 3}(L) statistic exhibit the signatures of missed levels.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗