Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model Checking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

LDEF satellite radiation study

Some early results are summarized from a program under way to utilize LDEF satellite data for evaluating and improving current models of the space radiation environment in low earth orbit. Reported here are predictions and comparisons with some of the LDEF dose and induced radioactivity data, which are used to check the accuracy of current models describing the magnitude and directionality of the trapped proton environment. Preliminary findings are that the environment models underestimate both dose and activation from trapped protons by a factor of about two, and the observed anisotropy is higher than predicted.

Armstrong, T. W.↗

Comparison of model predictions with LDEF satellite radiation measurements

Some early results are summarized from a program under way to utilize Long Duration Exposure Facility (LDEF) satellite data for evaluating and improving current models of the space radiation environment in low Earth orbit. Reported here are predictions and comparisons with some of the LDEF dose and induced radioactivity data, which are used to check the accuracy of current models describing the magnitude and directionality of the trapped proton environment. Preliminary findings are that the environment models underestimate both dose and activation from trapped protons by a factor of about two, and the observed anisotropy is higher than predicted.

Armstrong, T. W.↗

Towards Behavioral Reflexion Models

Software architecture has become essential in the struggle to manage today s increasingly large and complex systems. Software architecture views are created to capture important system characteristics on an abstract and, thus, comprehensible level. As the system is implemented and later maintained, it often deviates from the original design specification. Such deviations can have implication for the quality of the system, such as reliability, security, and maintainability. Software architecture compliance checking approaches, such as the reflexion model technique, have been proposed to address this issue by comparing the implementation to a model of the systems architecture design. However, architecture compliance checking approaches focus solely on structural characteristics and ignore behavioral conformance. This is especially an issue in Systems-of- Systems. Systems-of-Systems (SoS) are decompositions of large systems, into smaller systems for the sake of flexibility. Deviations of the implementation to its behavioral design often reduce the reliability of the entire SoS. An approach is needed that supports the reasoning about behavioral conformance on architecture level. In order to address this issue, we have developed an approach for comparing the implementation of a SoS to an architecture model of its behavioral design. The approach follows the idea of reflexion models and adopts it to support the compliance checking of behaviors. In this paper, we focus on sequencing properties as they play an important role in many SoS. Sequencing deviations potentially have a severe impact on the SoS correctness and qualities. The desired behavioral specification is defined in UML sequence diagram notation and behaviors are extracted from the SoS implementation. The behaviors are then mapped to the model of the desired behavior and the two are compared. Finally, a reflexion model is constructed that shows the deviations between behavioral design and implementation. This paper discusses the approach and shows how it can be applied to investigate reliability issues in SoS.

Ackermann, Christopher↗

Effective-medium model of wire metamaterials in the problems of radiative heat transfer

In the present work, we check the applicability of the effective medium model (EMM) to the problems of radiative heat transfer (RHT) through so-called wire metamaterials (WMMs)—composites comprising parallel arrays of metal nanowires. It is explained why this problem is so important for the development of prospective thermophotovoltaic (TPV) systems. Previous studies of the applicability of EMM for WMMs were targeted by the imaging applications of WMMs. The analogous study referring to the transfer of radiative heat is a separate problem that deserves extended investigations. We show that WMMs with practically realizable design parameters transmit the radiative heat as effectively homogeneous media. Existing EMM is an adequate tool for qualitative prediction of the magnitude of transferred radiative heat and of its effective frequency band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CONSTRAINTS ON LEMAITRE-TOLMAN-BONDI MODELS FROM OBSERVATIONAL HUBBLE PARAMETER DATA

We use the observational Hubble parameter data (OHD), both the latest observational data set (Stern et al.; referred to as SJVKS) and the simulated data sets, to constrain Lemaitre-Tolman-Bondi (LTB) void models. The necessity of the consistency check on OHD itself in the LTB cosmology is stressed. Three voids are chosen as test models and are constrained using the Union2 data set of SN Ia as well as OHD. Despite their different parameterization, the results from our test models show some similarities; e.g., the best-fit voids obtained from OHD are all considerably broader than those from SN Ia. Due to the small size of the SJVKS data set, the constraints are not conclusive. The constraining power of the future OHD observations are therefore investigated through a figure of merit (FoM) analysis based on the Monte Carlo simulated data. We found that, in the case that the future OHD become more consistent with SN Ia, the results from the test models are almost unanimous: (1) as many as 32 OHD data points at the SJVKS-like uncertainty level are needed to give a higher FoM than the Union2 data set of SN Ia, (2) precise observation helps reduce this required number, (3) increasing the survey depth does not always increase the FoM. On the other hand, if the future OHD and the Union2 data set keep favoring different voids, in a similar manner as they do at present, the 1{sigma} confidence regions obtained from the two probes should finally separate. We test this conjecture and find that the minimum observational requirement (the size of the data set, the uncertainty level, and the survey depth) for this inconsistency to emerge depends strongly on the void model.

79 ASTRONOMY AND ASTROPHYSICS↗

A Quantitative Model for the Prediction of Sooting Tendency from Molecular Structure

Particulate matter emissions negatively affect public health and global climate, yet newer fuel-efficient gasoline direct injection engines tend to produce more soot than their port-fuel injection counterparts. Fortunately, the search for sustainable biomass-based fuel blendstocks provides an opportunity to develop fuels that suppress soot formation in more efficient engine designs. However, as emissions tests are experimentally cumbersome and the search space for potential bioblendstocks is vast, new techniques are needed to estimate the sooting tendency of a diverse range of compounds. In this study, we develop a quantitative structure-activity relationship (QSAR) model of sooting tendency based on the experimental yield sooting index (YSI), which ranks molecules on a scale from n-hexane, 0, to benzene, 100. The model includes a rigorously defined applicability domain, and the predictive performance is checked using both internal and external validation. Model predictions for compounds in the external test set had a median absolute error of ~3 YSI units. An investigation of compounds that are poorly predicted by the model lends new insight into the complex mechanisms governing soot formation. Predictive models of soot formation can therefore be expected to play an increasingly important role in the screening and development of next-generation biofuels.

09 BIOMASS FUELS↗

IDAES-PSE 2.5.0 Release

The Institute for the Design of Advanced Energy Systems (IDAES) Integrated Platform is a versatile computational environment offering extensive process systems engineering (PSE) capabilities for optimizing the design and operation of complex, interacting technologies and systems. IDAES enables users to efficiently search vast, complex design spaces to discover the lowest cost, most environmentally sustainable solutions while supporting the full process modeling lifecycle, from conceptual design to dynamic optimization and control. The extensible, open platform empowers users to create models of novel processes and rapidly develop custom analyses, workflows, and end-user applications. IDAES-PSE 2.5.0 Release Highlights Upcoming Changes IDAES will be switching to the new Pyomo solver interface in the next release. Whilst this will hopefully be a smooth transition for most users, there are a few important changes to be aware of. The new solver interface uses a different version of the IPOPT writer (“ipopt_v2”) and thus any custom configuration options you might have set for IPOPT will not carry over and will need to be reset. By default, the new Pyomo linear presolver will be activated with ipopt_v2. Whilst are working to identify any bugs in the presolver, it is possible that some edge cases will remain. IDAES will begin deploying a new set of scaling tools and APIs over the next few releases that make use of the new solver writers. The old scaling tools and APIs will remain for backward compatibility but will begin to be deprecated. New Models, Tools and Features New diagnostics check for near-parallel variables and constraints. New diagnostics tools for identifying causes of infeasibility in models. New example for creating a custom model of a liquid-liquid extractor unit operation. Bug Fixes Fixed bug in Gibbs reactor that caused it to appear to have additional spurious degrees of freedom. Fixed bug in the Modular Property Framework that would cause errors when trying to use phase-based material balances with phase equilibria. Fixed bug in Modular Properties Framework that caused errors when initializing models with non-vapor-liquid phase equilibria. Testing and Robustness Deployed the IDAES Diagnostics Toolbox to confirm that there are no structural or numerical issues in the core model libraries. Additional robustness tests for core model, and some associated improvements in the converge tester class. Fixed a number of issues that were causing unexpected warnings to be emitted during testing. Deprecations and Removals Removed examples for RIPE tool which has not been supported for a number of releases.

AS↗

A linear feedback guidance law for an Aeromaneuvering Orbit-to-Orbit Shuttle

The sensitivity of the trajectory of an Aeromaneuvering Orbit-to-Orbit Shuttle (AMOOS) to unpredictable variations in atmospheric density is shown and a compensating guidance law is developed. The sensitivity was determined using a varying atmosphere model whose statistical properties matched those of actual atmosphere data. This study showed that a compensating guidance law is crucial to the feasibility of AMOOS. Using an optimal regulator approach, a linear feedback law for bank angle was developed and checked out with the atmosphere model. This law uses the altitude profile of the trajectory to control the amount of energy dissipated within the atmosphere.

Rehder, J. J.↗

Novel Radiometry for In-Pipe Robotic Inspection of Holdup Deposits in Gaseous Diffusion Piping - 19503

This paper details the first complete, DOE approved, deployed and operational radiometry for robotic nondestructive assay (NDA) of holdup deposits in gaseous diffusion piping. Some features, like peak-finding, Compton correction, detector efficiency, and material properties are characteristic of typical manual methods. Most features are specific to in-pipe robotic deployment. These include in-motion radiometry, self-determined location, geometric modeling of thick deposits, bounding of self-attenuation thickness and auto-checking of replicate measurements. Significant are the means for determining all the properties, equations, and constants for automatically computing and displaying all the quantities, uncertainties and information needed for NDA reporting, analysis, and review. Earlier work by this team demonstrated rudimentary but convincing robotic in-pipe NDA of holdup deposits in pipes. Cold testing with high-enrichment mat sources and hot tests with low U-235 loadings together succeeded to exhibit convincing proof-of-principle. This research-grade radiometry implementation lacked accurate odometry, efficiency calibration, high-fidelity detector modeling, attenuation modeling, forward geometric modeling, auto-segmenting, uncertainty modeling, replicate checking, deconvolution and much more. This work explains the technical basis behind robotic in-pipe NDA. It includes discussion of a new method for modeling of self-attenuation using in-pipe deposit geometry information, detail of the method's total measurement uncertainty, and explanation of calibration methods and results. Beyond development of automation-specific radiometric elements, the paper highlights analyses, testing, and technical bases specific to and supportive of the methodology. Examples include collimation characterization, detector efficiency determination, auto-calibration methodology, and odometric replicate-checking. Results of this methodology are formalized in a DOE EM Technical Basis Document, implemented in software, formally verified in review and acceptance testing and proceduralized as a means for D and D NDA at the Portsmouth enrichment facility. Measurement of U-235 quantity is a well-known cost and schedule driver in D and D of every defunct gaseous diffusion enrichment facility in the world. The radiometry methodologies and results detailed in this paper were the high hurdles. Having established the technical basis for this automated NDA, the opportunity is to apply this to many sizes and robot forms for addressing holdup deposit NDA throughout the D and D community. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The necessity for a new parameterization of an empirical model for wind/ocean scatterometry

Difficulties related to the paucity of weather observation data regarding oceans were potentially alleviated for three summer months in 1978 when NASA's Seasat telemetered data from three wind-measuring instruments. The present study is concerned with one of these instruments, the Seasat A Scatterometer System (SASS). Attention is given to an internal consistency check of the SASS 1 model, comparisons of SASS 1 and other model-predicted winds with in situ winds, and a brief summary of the principal findings. It is found that a new wind retrieval system is required if SASS wind data are to be globally applicable and, at the same time, are to meet the required performance specifications. The sum-of-squares (SOS) technique for inverting SASS NRCS (normalized radar cross section) measurements results in the discarding of valuable data in low-speed areas and for higher incidence angles.

Woiceshyn, P. M.↗

Consistency check of {Lambda}CDM phenomenology

The standard model of cosmology {Lambda}CDM assumes general relativity, flat space, and the presence of a positive cosmological constant. We relax these assumptions allowing spatial curvature, a time-dependent effective dark energy equation of state, as well as modifications of the Poisson equation for the lensing potential, and modifications of the growth of linear matter density perturbations in alternate combinations. Using six parameters characterizing these relations, we check {Lambda}CDM for consistency utilizing cosmic microwave background anisotropies, cross correlations thereof with high-redshift galaxies through the integrated Sachs-Wolfe effect, the Hubble constant, supernovae, and baryon acoustic oscillation distances, as well as the relation between weak gravitational lensing and galaxy flows. In all scenarios, we find consistency of the concordance model at the 95% confidence level. However, we emphasize that constraining supplementary background parameters and parametrizations of the growth of large-scale structure separately may lead to a priori exclusion of viable departures from the concordance model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Solid Rocket Motor Slag Population: Results of a Radar-based Regressive Statistical Evaluation

Solid rocket motor (SRM) slag has been identified as a significant source of man-made orbital debris. The propensity of SRMs to generate particles of 100 m and larger has caused concern regarding their contribution to the debris environment. Radar observation, rather than in-situ gathered evidence, is currently the only measurable source for the NASA/ODPO model of the on-orbit slag population. This simulated model includes the time evolution of the resultant orbital populations using a historical database of SRM launches, propellant masses, and estimated locations and times of tail-off. However, due to the small amount of observational evidence, there can be no direct comparison to check the validity of this model. Rather than using the assumed population developed from purely historical and physical assumptions, a regressional approach was used which utilized the populations observed by the Haystack radar from 1996 to present. The estimated trajectories from the historical model of slag sources, and the corresponding plausible detections by the Haystack radar, were identified. Comparisons with observational data from the ensuing years were made, and the SRM model was altered with respect to size and mass production of slag particles to reflect the historical data obtained. The result is a model SRM population that fits within the bounds of the observed environment.

Horstman, Matthew F.↗

Reanalysis of x ray emission from M87 II: Multiphase models

In a previous paper by the authors (hereafter TB), it was shown that the hot intracluster gas around M87 could not be adequately explained in terms of a spherically symmetric, single phase model. It was found that although data from the Einstein satellite High Resolution Imager (HRI), Imaging Proportional Counter (IPC), and Focal Point Crystal Spectrometer (FPCS) could indeed be simultaneously explained by a single phase model, data from the Solid State Spectrometer (SSS) and optically determined mass estimates could not be similarly explained. A qualitative discussion was then given to indicate how the adoption of a specific multiphase model could plausibly improve upon the single phase model, but a detailed discussion was delayed until now. The x ray data is reanalyzed for the gas around M87 in the same spirit as the work in TB. That is, by assuming several cooling flow models, the shortcomings are improved upon. The procedure of TB was adopted and the data reanalyzed in the following manner: a multiphase model is assumed which can compute the surface brightness as seen by HRI and IPC. Also, the line fluxes can be computed of the lines seen by the FPCS and the mass profile after assuming hydrostatic equilibrium. The parameters of the model are then adjusted to fit the data. A check is then made to see whether the resulting model is consistent with the SSS spectrum and the equivalent width of the 7 keV complex of Fe lines as seen by large field of view instruments.

Tsai, John C.↗

IT Research Services: Powerful Tools to Track a Fast Moving Industry

Research services change and evolve over time, sometimes suddenly, in their focus, topics, formats, service model, etc. You have to check in often. Some offer products that you can customize to your environment, others not so much. You will find a variation in customer management practices (e.g., when and how they share information) ...can sometimes be annoying. Assess your needs carefully. Each research service has a very different service model. Explore ways to share or lower the cost. Someone out there may share the expense when that is an option. Make sure you read the small print. It can work for you as well as against you. When in doubt, ask your Vendor's POC. Set up Research Service "gurus or SME's." Not to violate the copyright agreement of course, just have someone who knows what's there. After you subscribe, reassess.Get the most out of your investment. Some early enthusiasts will fade, and there will be others who don't know it's there and can use it.

Hunter, Paul↗

The Intensity Of The 2.7nm Reflection As A Constraint For Models Of Myosin Docking To Actin

Previous workers have proposed high resolution models for the docking of the myosin heads on actin on the basis of combined crystallographic and electron microscopy data (Mendelson and Morris, 1997 PNAS 94:8533; Holmes et al. 2003 Nature 425:423). We have used data from small angle X-ray fiber diffraction from living muscle to check the predictions of these models. Whole sartorius muscles from Rana pipiens were mounted in a chamber containing Ringer's solution at 10 C and at rest length at the BioCAT beamline (18 ID, Advanced Photon Source, Argonne, IL-U.S.A.). The muscles were activated by electrical stimulation and the force was recorded with a muscle lever system type 300B (Aurora Scientific). X-ray patterns were collected with 1s total exposures at rest and during isometric contraction out to 0.5 nm{sup -1} in reciprocal space, as the higher angle reflections are expected to be more sensitive to the arrangement of myosin heads on actin. We observed that during isometric contraction the meridional reflection originating from the 2.73nm repeat of the actin monomers along the actin filament increases its intensity by a factor 2.1 {+-} 0.2 relative to rest. Among the models tested, Holmes et al. fits the data when the actin filament is decorated with 30-40% the total available myosin heads, a fraction similar to that estimated with fast single fiber mechanics by Piazzesi et al. (2007, Cell 131:784). However, when the mismatch between the periodicities of actin and myosin filaments is taken into account, none of the models can reproduce the fiber diffraction data. We suggest that the fiber diffraction data should be used as a further constraint on new high resolution models for the docking of the myosin heads on actin.

43 PARTICLE ACCELERATORS↗

Dynamic Analysis and Control of Lightweight Manipulators with Flexible Parallel Link Mechanisms

The objective is the theoretical analysis and the experimental verification of dynamics and control of a two link flexible manipulator with a flexible parallel link mechanism. Nonlinear equations of motion of the lightweight manipulator are derived by the Lagrangian method in symbolic form to better understand the structure of the dynamic model. The resulting equation of motion have a structure which is useful to reduce the number of terms calculated, to check correctness, or to extend the model to higher order. A manipulator with a flexible parallel link mechanism is a constrained dynamic system whose equations are sensitive to numerical integration error. This constrained system is solved using singular value decomposition of the constraint Jacobian matrix. Elastic motion is expressed by the assumed mode method. Mode shape functions of each link are chosen using the load interfaced component mode synthesis. The discrepancies between the analytical model and the experiment are explained using a simplified and a detailed finite element model.

Lee, Jeh Won↗

Population of anatomically variable 4D XCAT adult phantoms for imaging research and optimization

Purpose: The authors previously developed the 4D extended cardiac-torso (XCAT) phantom for multimodality imaging research. The XCAT consisted of highly detailed whole-body models for the standard male and female adult, including the cardiac and respiratory motions. In this work, the authors extend the XCAT beyond these reference anatomies by developing a series of anatomically variable 4D XCAT adult phantoms for imaging research, the first library of 4D computational phantoms. Methods: The initial anatomy of each phantom was based on chest-abdomen-pelvis computed tomography data from normal patients obtained from the Duke University database. The major organs and structures for each phantom were segmented from the corresponding data and defined using nonuniform rational B-spline surfaces. To complete the body, the authors manually added on the head, arms, and legs using the original XCAT adult male and female anatomies. The structures were scaled to best match the age and anatomy of the patient. A multichannel large deformation diffeomorphic metric mapping algorithm was then used to calculate the transform from the template XCAT phantom (male or female) to the target patient model. The transform was applied to the template XCAT to fill in any unsegmented structures within the target phantom and to implement the 4D cardiac and respiratory models in the new anatomy. Each new phantom was refined by checking for anatomical accuracy via inspection of the models. Results: Using these methods, the authors created a series of computerized phantoms with thousands of anatomical structures and modeling cardiac and respiratory motions. The database consists of 58 (35 male and 23 female) anatomically variable phantoms in total. Like the original XCAT, these phantoms can be combined with existing simulation packages to simulate realistic imaging data. Each new phantom contains parameterized models for the anatomy and the cardiac and respiratory motions and can, therefore, serve as a jumping point from which to create an unlimited number of 3D and 4D variations for imaging research. Conclusions: A population of phantoms that includes a range of anatomical variations representative of the public at large is needed to more closely mimic a clinical study or trial. The series of anatomically variable phantoms developed in this work provide a valuable resource for investigating 3D and 4D imaging devices and the effects of anatomy and motion in imaging. Combined with Monte Carlo simulation programs, the phantoms also provide a valuable tool to investigate patient-specific dose and image quality, and optimization for adults undergoing imaging procedures.

60 APPLIED LIFE SCIENCES↗

Resource Analysis for Deep Direct-Use Feasibility Study in East Texas

The National Renewable Energy Laboratory, Southern Methodist University Geothermal Laboratory, Eastman Chemical, Turbine Air Systems, and the Electric Power Research Institute are evaluating the feasibility of using geothermal heat to improve the efficiency of natural gas power plants. The area of interest is the Eastman Chemical plant in Longview, Texas, which is on the northwestern margin of the Sabine Uplift. The study is focused on determining the potential for a geothermal reservoir within a 10 km radius of the site as defined by data from existing geological studies and cross-sections within the depths of 2,100 to 3,400 meters. Wells within a 20 km radius are included for broader geological comparison to determine the heat flow, temperature-at-depth, and oil and gas field porosity and permeability. The geothermal reservoir model is based on the multiple formation top data sources, published literature data, and well log interpretations within the 10 km radius. Area thickness estimates, reservoir extent bounding parameters, potential flow rates, and temperatures are combined to calculate a reservoir productivity index and develop a reservoir production model. Historical fluid volumes production data are used as an independent check for the reservoir productivity index and production model results. The reservoir parameters calculated here are being used for the surface engineering model to determine the economic viability of using geothermal fluids for a deep direct use application at this site. The data files are submitted as separate workbooks in 'content model' format, including: Well Fluid Production, Heat Flow, and Geologic Reservoir.

15 GEOTHERMAL ENERGY↗