Search NASA⌕ Search

SEARCH · Search NASA

Results for “Network Virtualization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

550 records · Page 31

Advancing Cross-Disciplinary Understanding of Land-Atmosphere Interactions

The evolution of disciplinary silos and increasingly narrow disciplinary boundaries have together resulted in one-sided approaches to the study of land-atmosphere interactions—a field that requires a bi-directional approach to understand the complex feedbacks and interactions that occur. The integration of surface flux and atmospheric boundary layer measurements is therefore essential to advancing our understanding. The Land-Atmosphere 2021 workshop (held virtually, June 10-11, 2021) involved almost 300 participants from around the world and promoted cross-discipline collaboration by way of talks from invited speakers, moderated discussions, breakout sessions, and a virtual poster session. The workshop focused on five main theme areas: “big picture” overview, instrumentation and remote sensing, modeling, water, and aerosols and clouds. In talks and breakout groups, there were frequent calls for more AmeriFlux sites to be instrumented for boundary layer height measurements, and for the development of some “super sites” where profiling instruments would be deployed. There was further agreement on the need for the standardization of various datasets. There was also a consensus that funding agencies need to be willing to support the sorts of large projects (including associated instrumentation) which can drive interdisciplinary work. Early-career scientists, in particular, expressed enthusiasm for working across disciplinary boundaries but noted that there need to be more financial support and training opportunities so they would be better prepared for interdisciplinary work. Investment in these career development opportunities would enable today's cohort of early-career scientists to advance the frontiers of interdisciplinary work over the next couple of decades.

54 ENVIRONMENTAL SCIENCES↗

Pathways to Carbon Liberation: A Systems Approach to Understanding Carbon Transformations and Losses from Thawing Permafrost

Our objective in this project was to discover how microbial communities mediate the fate of carbon in thawing permafrost under climate change. We proposed a systems approach integrating (a) molecular microbial and viral ecology, (b) molecular organic chemistry and stable and radiocarbon isotopes, and (c) state-of-the-art modeling, along a chronosequence of permafrost thaw in subarctic Sweden. The fate of carbon (C) in thawing permafrost is an outstanding challenge of modern biogeochemistry and climate change. Permafrost C pools are large (~1700 PgC), and C dynamics of thawing permafrost complex: old C decomposes as it is liberated from thawing permafrost as CO 2 or CH 4 , with a significant fraction cycling through lake sediments, even as new C accumulates due to thaw-initiated ecological succession. Our work is allowing better prediction of the net effect of these processes. Microbes mediate C dynamics in thawing permafrost, but a mechanistic understanding of how to scale microbial population dynamics, genomic potential, and expression to ecosystem-scale processes has been missing. A key question was: What is the interplay of microbial communities and organic matter chemical structure in the decomposition/preservation of organic C across a thaw gradient? And intriguingly, what (if any) is the role of phage (viruses that infect prokaryotic cells) in mediating these processes? Viruses appear to play a large role in driving oceanic function, but these phenomena are virtually unstudied in terrestrial systems. This endeavor linking microbial and viral dynamics, organic geochemistry and trace gas production will improve models of C cycling in permafrost systems, and clarify the fate of C under future climates. Technical Approach – We conducted a study at Stordalen Mire, Sweden, along a permafrost thaw chronosequence encompassing permafrost palsas and their initial collapse stage, thawing bog sites (dominated by Sphagnum moss), fully-thawed and inundated fen sites (dominated by Eriophorum spp or Carex spp.), and lakes. Our project used cutting edge technologies in both biogeochemistry and molecular microbial ecology to advance systems biology research on microbial carbon cycling through: (a) systems-level mapping of chemical states and ages of organic matter (via FT-ICR-MS and 14 C analysis) along thaw gradients to associated microbial communities, biochemical potentials, and activities (via meta-genomics, -transcriptomics, –proteomics, and viral genomics), and to CO 2 and CH 4 fluxes; (b) experimental incubations using Quantum Dot Probing, to test key hypotheses, arising from (a), about particular microbially-driven biochemical degradation pathways; (c) bioinformatics designed to simultaneously enhance the DOE Knowledgebase, and (d) integrated ecosystem C-cycle modeling testable by soil organic chemical and microbial data. Results from this project spanned 4 categories: (i) integrative across disciplines, and disciplinarily-focused in (ii) microbiology, (iii) biogeochemistry, and (iv) modeling. In integrated understanding of the system, we answered the questions posed above, mapping resident microbes to carbon transformations to reveal a carbon-processing shift with permafrost thaw, and discovering abundant, diverse and habitat-specific viruses that appear to be impacting carbon cycling, while also relating microbial communities to modeled processes. In microbiology-specific papers, we dug into viromes, microbial community networks, and informatic methods, while also introducing a new permafrost-associated phylum and its ecogenomic context. Relevance to DOE FOA - With a focus on discovering how microbial communities mediate the fate of old and new carbon in permafrost systems with climate change, our work directly responds to the call for “–omics driven basic research on the contribution of... microbial communities to C cycling processes in terrestrial ecosystems.” We bridge all three of the focal areas of the call, including (i) “Systems biology studies”, and development of –omics approaches (ii) “to investigate microbial community functional processes”, and (iii) “for imaging and analysis of microbially-mediated carbon cycling.”

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unified Model of Current-Limiting Grid-Forming Inverters for Large-Signal Analysis

Grid-forming (GFM) inverters can hardly withstand any overloading. As such, GFM inverters need a current limiter in their control system to avoid hardware damage during overloading or grid disturbances. When the current limiter is engaged for inverter protection, however, it dynamically changes the inverter output impedance, which can significantly affect the system behavior against large disturbances. For example, when the current limiter curtails the output power, the primary controller of the GFM inverter-which generates the voltage and angle reference-is prone to losing synchronization with the grid. This can cause large-signal instability in the network. This paper presents a unified GFM current-limiter model to gain a deeper understanding of the impact of the GFM inverter current limiting on large-signal instability and other system behaviors. The unified model captures several well-known current limiters for GFM inverters, and it reveals their large-signal equivalence characterized by the limiter angle. We use the unified model to present in-depth insights into the driving forces that cause large-signal instability in GFM inverter-driven grids. Further, this paper illustrates that the unified model can be used as a tool for assessing the system-level impacts of various GFM current-limiter designs during grid disturbances. Using numerical, analytical, electromagnetic transient models, and a hardware setup, the validity of the unified model is evaluated.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Leveraging generative artificial intelligence to bridge domain gaps in wind turbine research

A central challenge in wind turbine health monitoring is the scarcity of real-world data due to limited instrumentation, leading researchers to rely on simulation models that often suffer from reduced fidelity. However, even within simulation environments, discrepancies arise because of modeling assumptions, and configuration fidelities, creating domain gaps that limit the transferability of learned representations. Here, to investigate domain translation under controlled conditions, this project explores the use of generative artificial intelligence, specifically cycle-consistent generative adversarial networks (CGANs), to bridge the gap between OpenFAST simulation models representing 1.5 MW and 5 MW wind turbines. A physics-informed CGAN architecture is introduced, where a simplified turbine tower dynamics model is incorporated into the training loss to ensure physically consistent outputs. Quantitative results showed moderate to high agreement in frequency-domain features. Incorporating the physics-informed loss function improved the R 2 values by 30%, reduced the RMSE from 1.39 to 1.1 m/s 2 , and reduced training time by 82%. Furthermore, under increased turbulence intensity (IEC Category A), the RMSE remained stable at approximately 1.1 m/s 2 . While the present study is entirely simulation-based, it establishes a pipeline for evaluating physics-informed generative domain translation, which may serve as a foundation for future simulation-to-reality validation studies.

17 WIND ENERGY↗

Observation of Electroweak Single Top-Quark Production with the CDF II Experiment

The standard model of elementary particle physics (SM) predicts, besides the top-quark pair production via the strong interaction, also the electroweak production of single top-quarks [19]. Up to now, the Fermilab Tevatron proton-antiproton-collider is the only place to produce and study top quarks emerging from hadron-hadron-collisions. Top quarks were directly observed in 1995 during the Tevatron Run I at a center-of-mass energy of √s = 1.8 TeV simultaneously by the CDF and D0 Collaborations via the strong production of top-quark pairs. Run II of the Tevatron data taking period started 2001 at √s = 1.96 TeV after a five year upgrade of the Tevatron accelerator complex and of both experiments. One main component of its physics program is the determination of the properties of the top quark including its electroweak production. Even though Run II is still ongoing, the study of the top quark is already a successful endeavor, confirmed by dozens of publications from both Tevatron experiments. A comprehensive review of top-quark physics can be found in reference. The reasons for searching for single top-quark production are compelling. As the electroweak top-quark production proceeds via a Wtb vertex, it provides the unique opportunity of the direct measurement of the CKM matrix element |V tb |, which is expected to be |V tb | ~ 1 in the SM. Significant deviations from unity could be an indication of a fourth quark generation, a production mode via flavor-changing neutral currents, and other new phenomena, respectively. There are two dominating electroweak top-quark production modes at the Fermilab Tevatron: the t-channel exchange of a virtual W boson striking a b quark and the s-channel production of a timelike W boson via the fusion of two quarks. In proton-antiproton-collisions the third electroweak production mode, the associated Wt production of an on-shell W boson in conjunction with a top quark has a comparatively negligible small predicted cross section. Therefore, the vast majority of the CDF and D0 single top-quark analyses search for the combined s- and t-channel signal, with the production ratio to be given by the SM. In Tevatron Run I, several limits on the single top-quark production cross section were set by CDF and D0, whereas in Run II, even stronger limits followed by both collaborations. Furthermore, limits on the non-SM production of single top-quarks via flavor-changing neutral currents could be obtained. The electroweak production of single top-quarks has not yet been observed up to the time of this thesis, although the D0 and shortly thereafter the CDF Collaborations found first evidence. The experimental challenge of the search for single top-quark production is the tiny expected signal beneath a large and imprecisely known amount of background processes. The relative fraction of background events is at the order of about ten times higher compared to the top-quark pair production. Consequently, the expected signal amounts to about 5% of the full candidate event sample whose background contribution is only known to a level at the order of 20%. Furthermore, the signal events themselves are expected to be not as distinct from the background as the top-quark pair production since there is only one heavy object present in the event. Thus, experimental methods like simple counting experiments are not sufficiently sensitive and the development of more sophisticated analysis techniques is required to distinguish such small signals from alike and inaccurately known background processes. Neural networks comply with those requirements. They can be used to distinguish between signal and background processes by combining the information contained in several variables into a powerful discriminant, while each variable has a rather low separation capability. The application of those neural network discriminants to collision data provide a method for the extraction of the signal fraction and its significance. This thesis presents a neural network search for combined as well as separate s- and t-channel single top-quark production with the CDF II experiment at the Tevatron using 3.2 fb -1 of collision data. It is the twelfth thesis dealing with single top-quark production performed within the CDF Collaboration, whereas three have been done in Run I and eight in Run II.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Surrogate modeling of Cellular-Potts agent-based models as a segmentation task using the U-Net neural network architecture

The Cellular-Potts model is a powerful and ubiquitous framework for developing computational models for simulating complex multicellular biological systems. Cellular-Potts models (CPMs) are often computationally expensive due to the explicit modeling of interactions among large numbers of individual model agents and diffusive fields described by partial differential equations (PDEs). In this work, we develop a convolutional neural network (CNN) surrogate model using a U-Net architecture that accounts for periodic boundary conditions. We use this model to accelerate the evaluation of a mechanistic CPM previously used to investigate in vitro vasculogenesis. The surrogate model was trained to predict 100 computational steps ahead (Monte-Carlo steps, MCS), accelerating simulation evaluations by a factor of 562 times compared to single-core CPM code execution on CPU. Over short timescales of up to 3 recursive evaluations, or 300 MCS, our model captures the emergent behaviors demonstrated by the original Cellular-Potts model such as vessel sprouting, extension and anastomosis, and contraction of vascular lacunae. This approach demonstrates the potential for deep learning to serve as a step toward efficient surrogate models for CPM simulations, enabling faster evaluation of computationally expensive CPM simulations of biological processes.

97 MATHEMATICS AND COMPUTING↗

Analysis of combined hydrogen, heat, and power as a bridge to a hydrogen transition.

Combined hydrogen, heat, and power (CHHP) technology is envisioned as a means to providing heat and electricity, generated on-site, to large end users, such as hospitals, hotels, and distribution centers, while simultaneously producing hydrogen as a by-product. The hydrogen can be stored for later conversion to electricity, used on-site (e.g., in forklifts), or dispensed to hydrogen-powered vehicles. Argonne has developed a complex-adaptive-system model, H2CAS, to simulate how vehicles and infrastructure can evolve in a transition to hydrogen. This study applies the H2CAS model to examine how CHHP technology can be used to aid the transition to hydrogen. It does not attempt to predict the future or provide one forecast of system development. Rather, the purpose of the model is to understand how the system works. The model uses a 50- by 100-mile rectangular grid of 1-square-mile cells centered on the Los Angeles metropolitan area. The major expressways are incorporated into the model, and local streets are considered to be ubiquitous, except where there are natural barriers. The model has two types of agents. Driver agents are characterized by a number of parameters: home and job locations, income, various types of 'personalities' reflective of marketing distinctions (e.g., innovators, early adopters), willingness to spend extra money on 'green' vehicles, etc. At the beginning of the simulations, almost all driver agents own conventional vehicles. They drive around the metropolitan area, commuting to and from work and traveling to various other destinations. As they do so, they observe the presence or absence of facilities selling hydrogen. If they find such facilities conveniently located along their routes, they are motivated to purchase a hydrogen-powered vehicle when it becomes time to replace their present vehicle. Conversely, if they find that they would be inconvenienced by having to purchase hydrogen earlier than necessary or if they become worried that they would run out of fuel before encountering a facility, their motivation to purchase a hydrogen-powered vehicle decreases. At vehicle purchase time, they weigh this experience, as well as other factors such as social influence by their peers, fuel cost, and capital cost of a hydrogen vehicle. Investor agents build full-service hydrogen fueling stations (HFSs) at different locations along the highway network. They base their decision to build or not build a station on their (imperfect) estimates of the sales the station would immediately generate (based on hydrogen-powered vehicle traffic past the location and other factors), as well as the growth in hydrogen sales they could expect throughout their investment horizon. The interaction between driver and investor agents provides the basis for growth in both the number of hydrogen vehicles and number of hydrogen stations. For the present report, we have added to this mix smaller, 'bare-bones' hydrogen dispensing facilities (HDFs) of the type that owners of CHHP facilities could provide to the public. The locations of these stations were chosen to match existing facilities that might reasonably incorporate CHHP plants in the future. Unlike the larger commercial stations, these facilities are built according to exogenously supplied timetables, and no attempt has been made to model the financial basis for the facilities. Rather, our objective is to understand how the presence of these additional stations might facilitate the petroleum-to-hydrogen transition. We discuss a base case in which the HDFs are not present, and then investigate the effects of introducing HDFs in various numbers; according to different timetables; with various production capacities; and with hydrogen selling at prices above, equal to, and below the commercial stations selling price. We conclude that HDFs can indeed be helpful in accelerating a petroleum-to-hydrogen transition. Placed in areas where investors might not be willing to install large for-profit HFSs, HDFs can serve as a bridge until demand for hydrogen increases to the point where larger stations are viable. For drivers to use them, however, HDFs must sell hydrogen at a price competitive with that of the larger HFSs. Because the marginal cost of producing hydrogen is expected to be higher for small capacities, HDFs may be uncompetitive without (possibly substantial) subsidies or other means to allow them to sell hydrogen at a price below the actual cost to produce and distribute it. Fortunately, HDFs do not need to be subsidized for very long. In our model, installing HDFs only as the demand for hydrogen increased was effective; then closing down all HDFs after five years into the transition made virtually no difference to the resultant accelerated outcome. Even installing much smaller numbers of HDFs only in the second and third years of the simulation and then closing them at the end of the fifth year was helpful.

08 HYDROGEN↗

Polynuclear Aromatic Hydrocarbons with Curved Surfaces: Buckyballs

The discovery of a new allotropic form of elemental carbon – the fullerenes – and subsequently other novel forms of elemental carbon with pyramidalized surfaces, most notably single-walled and multi-walled carbon nanotubes, introduced a novel structural motif to the polycyclic aromatic hydrocarbons (PAHs) with nonplanar surfaces. Our research program supported by BES DOE grant DE-FG02-04ER15514 has dealt with the synthesis, structural studies, and chemistry of the novel curved-surface PAHs with carbon frameworks structurally related to fullerenes. They are referred to as “buckybowls”. We prepared several new buckybowls and, even more importantly, developed the efficient, gram-scale synthetic methodologies for the preparation of small buckybowls, most notably corannulene (C20H10) and its derivatives. In addition, the employment of the corannulene-based synthons previously developed in our laboratory led to a number of highly nonplanar molecular architectures with two or more corannulene subunits with a potential for the applications as novel materials in separation sciences, nanoelectronics, photovoltaics and catalysis. In collaboration with Professor Angelici (Iowa State) we prepared and characterized several transition metal complexes of corannulene, providing the first structural characterization of η6 metal complexes of buckybowls by a single crystal X-ray diffraction. In addition to the definitive structural characterization of the complexes we demonstrated that the (η6-C6Me6)Ru2+ unit in some relatively stable complexes activate the corannulene ligand to react with proper nucleophiles suggesting that such complexex may be used in catalysis. (Section C). We have explored the efficiency of the dispersion-based interactions of curved-surface conjugated carbon networks by high-level computational models. We showed that the curvature of such networks does not reduce the van der Waals attractions as compared to the planar systems of similar size. We than concentrated on the design, synthesis and testing of the previously unknown molecular receptors with corannulene pincers which are capable of forming the strong ball-and-socket inclusion complexes with fullerenes in solution and in the solid state. Buckycatcher I (a molecular receptor with two corannulene pincers preorganized on a tetrabensocyclooctatetraene tether) inclusion complexes with fullerenes provided the first experimental evidence for the importance of concave-convex π – π interactions in the supramolecular chemistry of fullerene carbon cages with buckybowls. C60@Buckycatcher I has become the prototypical supramolecular system formed by the relatively weak (on the atom-to-atom bases) and has been extensively used by the computational community to test the quality of the theoretical models. In addition, Buckycatcher I shows an exceptional ability to adopt other guest molecules and several its inclusion complexes and/or solvates have been structurally characterized. These unusual structures show the potential of the buckycatchers to be tested as novel organic materials. “Intelligent design” of molecular receptors with corannulene receptors using computational approach allowing for a priori prediction of their binding potentials led to the preparation of other buckycatchers. Both bi- and tridentate corannulene pincers were tested and two of the bidentate receptors (Buckycatchers II and III) exhibited the outstanding affinity toward fullerenes, significantly exciding Buckycatcher I performance. Careful tailoring of the tethers resulted in the optimization of binding energies of the receptors with guest carbon cages and in the reduction of the entropy/solvation penalties. Practical preparation of dicorannulenopentacene opens a new avenue for the synthesis of a pool of bis-corannulene receptors possessing polar groups on their dibenzobarrelene tether. The polar “anchors” can be used to attach these efficient fullerene receptors to solid supports in order to modify their surfaces with the potential applications in separation sciences, catalysis and photovoltaic materials. additionally, the presence of such groups will improve the solubility of the receptors in polar solvents, expanding the scope of their supramolecular chemistry in solutions. Rigorous studies of thermodynamics of host-guest association of molecular clips and tweezers in organic solvents with C60/C70 inclusion complexes with Buckycatcher I as a model system have provided a full set of thermodynamical data including ΔG, ΔH, and –TΔS, for the formation of the inclusion complexes over a range of temperatures and in several solvents. Both 1H NMR and Isothermal Calorimetry (ITC) titrations provide virtually identical association constants, confirming the reliability of the results. WE have shown that thermodynamics of the host-guest complex formation is more complicated than anticipated and proposed by the existing computational models. These data are of premium importance for the testing of the computational solvation models and for a deeper understanding of the supramolecular interactions in organic solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deep functional analysis of synII, a 770-kilobase synthetic yeast chromosome

INTRODUCTION Although much effort has been devoted to studying yeast in the past few decades, our understanding of this model organism is still limited. Rapidly developing DNA synthesis techniques have made a “build-to-understand” approach feasible to reengineer on the genome scale. Here, we report on the completion of a 770-kilobase synthetic yeast chromosome II (synII). SynII was characterized using extensive Trans-Omics tests. Despite considerable sequence alterations, synII is virtually indistinguishable from wild type. However, an up-regulation of translational machinery was observed and can be reversed by restoring the transfer RNA (tRNA) gene copy number. RATIONALE Following the “design-build-test-debug” working loop, synII was successfully designed and constructed in vivo. Extensive Trans-Omics tests were conducted, including phenomics, transcriptomics, proteomics, metabolomics, chromosome segregation, and replication analyses. By both complementation assays and SCRaMbLE (synthetic chromosome rearrangement and modification by loxP -mediated evolution), we targeted and debugged the origin of a growth defect at 37°C in glycerol medium. RESULTS To efficiently construct megabase-long chromosomes, we developed an I- Sce I–mediated strategy, which enables parallel integration of synthetic chromosome arms and reduced the overall integration time by 50% for synII. An I- Sce I site is introduced for generating a double-strand break to promote targeted homologous recombination during mitotic growth. Despite hundreds of modifications introduced, there are still regions sharing substantial sequence similarity that might lead to undesirable meiotic recombinations when intercrossing the two semisynthetic chromosome arm strains. Induction of the I- Sce I–mediated double-strand break is otherwise lethal and thus introduced a strong selective pressure for targeted homologous recombination. Since our strategy is designed to generate a markerless synII and leave the URA3 marker on the wild-type chromosome, we observed a tenfold increase in URA3 -deficient colonies upon I- Sce I induction, meaning that our strategy can greatly bias the crossover events toward the designated regions. By incorporating comprehensive phenotyping approaches at multiple levels, we demonstrated that synII was capable of powering the growth of yeast indistinguishably from wild-type cells (see the figure), showing highly consistent biological processes comparable to the native strain. Meanwhile, we also noticed modest but potentially significant up-regulation of the translational machinery. The main alteration underlying this change in expression is the deletion of 13 tRNA genes. A growth defect was observed in one very specific condition—high temperature (37°C) in medium with glycerol as a carbon source—where colony size was reduced significantly. We targeted and debugged this defect by two distinct approaches. The first approach involved phenotype screening of all intermediate strains followed by a complementation assay with wild-type sequences in the synthetic strain. By doing so, we identified a modification resulting from PCRTag recoding in TSC10 , which is involved in regulation of the yeast high-osmolarity glycerol (HOG) response pathway. After replacement with wild-type TSC10 , the defect was greatly mitigated. The other approach, debugging by SCRaMbLE, showed rearrangements in regions containing HOG regulation genes. Both approaches indicated that the defect is related to HOG response dysregulation. Thus, the phenotypic defect can be pinpointed and debugged through multiple alternative routes in the complex cellular interactome network. CONCLUSION We have demonstrated that synII segregates, replicates, and functions in a highly similar fashion compared with its wild-type counterpart. Furthermore, we believe that the iterative “design-build-test-debug” cycle methodology, established here, will facilitate progression of the Sc2.0 project in the face of the increasing synthetic genome complexity. SynII characterization. ( A ) Cell cycle comparison between synII and BY4741 revealed by the percentage of cells with separated CEN2-GFP dots, metaphase spindles, and anaphase spindles. ( B ) Replication profiling of synII (red) and BY4741 (black) expressed as relative copy number by deep sequencing. ( C ) RNA sequencing analysis revealed that the significant up-regulation of translational machinery in synII is induced by the deletion of tRNA genes in synII.

Shen, Yue↗

Collaboratory=Collaborate+Laboratory: The Mid-Columbia STEM Education Collaboratory

Pacific Northwest National Laboratory created a network focused on collaboration in STEM education to design and deliver projects, resources, and professional learning opportunities in a testbed environment. How do you uncover and fill gaps in equitable access to high-quality science, technology, engineering, and math (STEM) education offerings in your local region? Where might you deploy strategies to improve STEM workforce preparation and increase public understanding of STEM-oriented issues? And how can you help to ensure that students, educators, parents, and the community are aware of these programs and know how to access them in schools, colleges, and community venues? If you are the Pacific Northwest National Laboratory (PNNL), you take on the huge goal of designing and implementing an innovative STEM education collaboration project that impacts all levels of local education, both inside and outside of school settings. PNNL is one of the 17 national laboratories funded by the U.S. Department of Energy. Operated by Battelle, PNNL has a vested interest in preparing the next generation of scientists and engineers for their future careers, thus building a STEM-capable workforce and creating a STEM-literate community. One of Battelle’s core principles is a commitment to STEM education and its role in business competitiveness and quality of life. PNNL has been active in STEM education for decades, providing internships for future scientists, giving educators in-house lab experiences, and engaging its researchers in STEM outreach activities in classrooms and the community. The Collaboratory is a relatively recent outcome of Battelle’s longstanding efforts in STEM education. The original Collaboratory planning documents, developed by PNNL’s Office of STEM Education (OSE), state the objective to “design, implement, and mature a local STEM education collaboration zone that highlights the power of PNNL and Battelle to impact the educational ecosystem and serve as a model for amplifying and accelerating progress in addressing our STEM education and workforce challenges” (PNNL 2013). In other words, we (the OSE) sought to create a zone of collaboration in which members co-design and deliver STEM education programs, share findings and lessons learned from their experiences, and co-manage and sustain the organization. We started by identifying possible collaborators located nearby in the largely rural southeast corner of Washington State. Recognizing that our potential collaborators had differing norms, values, and relationships within the community, as well as their own areas of expertise and purpose, we convened representatives from K–12 public and private schools, higher education, community-based learning providers, and local business and industry to brainstorm a unified vision to resolve gaps in local STEM education needs. Through discussions with these collaborators, we started hunting for gaps where STEM efforts were lacking but a desire to improve existed. We gave ourselves permission to try things out and built a testbed space where we could experiment with new ideas, gather evidence of feasibility, and treat failures as constructive learning opportunities. Through this generative process and with seed funding from Battelle, inter-organizational teams now work together, both virtually and in real time, to develop, test, and deploy resources to support student success, educators’ effectiveness, and community engagement in STEM. Thus, the Mid-Columbia STEM Education Collaboratory (Collaboratory) was born. This is the story of our beginnings: our challenges, our lessons learned, and emerging indicators of success. For those interested in launching an education–business–community STEM learning ecosystem, we share our story.

Collaboratory↗