Search NASA⌕ Search

SEARCH · Search NASA

Results for “OSCILLATION MODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

A method for the estimation of p-mode parameters from averaged solar oscillation power spectra

A new fitting methodology is presented that is equally well suited for the estimation of low-, medium-, and high-degree mode parameters from m-averaged solar oscillation power spectra of widely differing spectral resolution. This method, which we call the “Windowed, MuLTiple-Peak, averaged-spectrum” or WMLTP Method, constructs a theoretical profile by convolving the weighted sum of the profiles of the modes appearing in the fitting box with the power spectrum of the window function of the observing run, using weights from a leakage matrix that takes into account observational and physical effects, such as the distortion of modes by solar latitudinal differential rotation. We demonstrate that the WMLTP Method makes substantial improvements in the inferences of the properties of the solar oscillations in comparison with a previous method, which employed a single profile to represent each spectral peak. We also present an inversion for the internal solar structure, which is based upon 6366 modes that we computed using the WMLTP method on the 66 day 2010 Solar and Heliospheric Observatory/MDI Dynamics Run. To improve both the numerical stability and reliability of the inversion, we developed a new procedure for the identification and correction of outliers in a frequency dataset. We present evidence for a pronounced departure of the sound speed in the outer half of the solar convection zone and in the subsurface shear layer from the radial sound speed profile contained in Model S of Christensen-Dalsgaard and his collaborators that existed in the rising phase of Solar Cycle 24 during mid-2010.

79 ASTRONOMY AND ASTROPHYSICS↗

Unstable-Resonator Oscillator/Amplifier Diode Laser

Fabricated as single-chip integrated circuit. Device based partly on concept proved in commercial solid-state lasers: using unstable-resonator oscillator to define electromagnetic mode and, following oscillator, traveling-wave amplifier to generate high power. Mode-definition and power-amplification functions optimized separately. Hyperbolic-grating, unstable-resonator oscillator/amplifier diode laser produces single-longitudinal-mode, broad, laterally coherent, diffraction-limited, high-power beam.

Lang, Robert J.↗

Magnetic field corrections to solar oscillation frequencies

It is argued that the frequencies of both the solar p- and g-modes of oscillation are modified by a magnetic field. In particular, the decrease in p-mode frequencies is attributed to a magnetic field within the solar interior evolving over the solar cycle. Field strengths at the base of the convection zone of at least 500,000 G are required.

Roberts, B.↗

Evolution and seismology of Procyon

We have calculated an array of stellar models for Procyon A that are based on the best physics available to us, including the latest opacities and nuclear cross sections. The array of models spans the error space centered on Procyon's mass, chemical composition, effective temperature, and luminosity. We find that with OPAL opacities no convective overshoot is needed at the edge of the convective core to match Procyon's position in the H-R diagram. We discuss the discrepancy between the astrophysical mass and the astrometric mass, which is reduced by the more up-to-date physics in the models, and describe how oscillation data can be used to distinguish among the possible models and help resolve the discrepancy. We have calculated oscillation frequencies for the l = 0, 1, 2, and 3 p-modes and oscillation periods for the l = 1, 2, and 3 g-modes for several of these models.

Guenther, D. B.↗

Effect of static deformation and external forces on the oscillations of levitated droplets

The oscillations of an aspherical droplet subjected to different external forces are considered. For an arbitrary shape deformation, it is shown that the frequency spectrum splits into (2l - 1) peaks for a mode l oscillation, and the splitting of the frequency spectrum is calculated for mode 2, 3, and 4 oscillations. The deformation is then treated as a consequence of a general external force, and the frequency split is obtained in terms of the external force parameters. Droplets levitated by acoustic, electromagnetic, and combined acoustic-electromagnetic forces are considered in particular, and it is shown that the effects of asphericity adequately explain the splitting of the frequency spectrum observed commonly in experiments. The interpretation of spectra with regard to accurate surface tension measurement using the oscillations of levitated droplets is discussed, and the results applied to some previous experimental results. It is shown that the accuracy of surface tension measurements can improve if the asphericity caused by the levitating force, and the resulting frequency split, are taken into account.

Suryanarayana, P. V. R.↗

PBjam: A Python Package for Automating Asteroseismology of Solar-like Oscillators

Asteroseismology is an exceptional tool for studying stars using the properties of observed modes of oscillation. So far the process of performing an asteroseismic analysis of a star has remained somewhat esoteric and inaccessible to nonexperts. In this software paper we describe PBjam, an open-source Python package for analyzing the frequency spectra of solar-like oscillators in a simple but principled and automated way. The aim of PBjam is to provide a set of easy-to-use tools to extract information about the radial and quadropole oscillations in stars that oscillate like the Sun, which may then be used to infer bulk properties such as stellar mass, radius, age, or even structure. Asteroseismology and its data analysis methods are becoming increasingly important as space-based photometric observatories are producing a wealth of new data, allowing asteroseismology to be applied in a wide range of contexts such as exoplanet, stellar structure and evolution, and Galactic population studies.

79 ASTRONOMY AND ASTROPHYSICS↗

Primordial spikes from wrapped brane inflation

Cosmic inflation driven by branes wrapping the extra dimensions involves Kaluza-Klein (KK) degrees of freedom in addition to the zero-mode position of the brane which plays the role of the inflaton. As the wrapped brane passes by localized sources or features along its inflationary trajectory in the extra dimensional space, the KK modes along the wrapped direction are excited and start to oscillate during inflation. We show that the oscillating KK modes induce parametric resonance for the curvature perturbations, generating sharp signals in the perturbation spectrum. The effective four dimensional picture is a theory where the inflaton couples to the heavy KK modes. The Nambu-Goto action of the brane sources couplings between the inflaton kinetic terms and the KK modes, which trigger significant resonant amplification of the curvature perturbations. We find that the strong resonant effects are localized to narrow wave number ranges, producing spikes in the perturbation spectrum. Investigation of such resonant signals opens up the possibility of probing the extra dimensional space through cosmological observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Mode Meter for Mitigating Forced Oscillations on the Grid

Increased renewable energy sources connected to the power grid leads to forced power oscillations that result in costly outages and an unstable grid. Forecasting and predicting fluctuations is difficult for grid operators. PNNL, Montana Tech and the University of Wyoming developed Mode Meter, a power tool that detects and reports grid instabilities. Using three advanced algorithms, Mode Meter detects, analyzes, and helps localize power swings that are growing unstable. Mode Meter uses precise, time-synchronized data collected from thousands of advanced sensors placed on powerlines and other transmission devices. Information is reported in an easy-to-read visual tool. The patented innovation is available for commercialization. Contact Commercialization Manager Peter Christensen at peter.christensen@pnnl.gov

24 POWER TRANSMISSION AND DISTRIBUTION↗

Obtaining single-cycle pulses from a mode-locked laser

In all existing mode-locked lasers, the ultimate limit on the output pulse duration is set by the bandwidth of the gain medium. Yet the technique of coherent mode locking allows one to generate broadband pulses from a laser with a linearly narrowband active medium by exploiting the coherent properties of the amplifier. In this work we numerically demonstrate how to use this technique for the generation of single-cycle pulses directly from a mode-locked oscillator.

74 ATOMIC AND MOLECULAR PHYSICS↗

Flame Edge Dynamics and Interaction in a Multi-Nozzle Can Combustor with Fuel Staging

The characterization and mitigation of thermoacoustic combustion instabilities in gas turbine engines is necessary to reduce pollutant emissions, premature wear, and component failure associated with unstable flames. Fuel staging, a technique in which the fuel flow to a multi-nozzle combustor is unevenly distributed between the nozzles, has been shown to mitigate the intensity of self-excited combustion instabilities in multiple nozzle combustors. In our previous work, we hypothesized that staging suppresses instability through a phase-cancellation effect in which the heat release rate from the staged nozzle oscillates out of phase with that of the other nozzles, leading to destructive interference that suppresses the instability. This previous theory, however, was based on chemiluminescence imaging, which is a line-of-sight integrated technique. In this work, we use high-speed laser-induced fluorescence to further investigate instability suppression in two staging configurations: center-nozzle and outer-nozzle staging. An edge-tracking algorithm is used to compute local flame edge displacement as a function of time, allowing instability-driven edge oscillation phase coherence and other instantaneous flame dynamics to be spectrally and spatially resolved. Analysis of flame edge oscillations shows the presence of convecting coherent fluctuations of the flame edge caused by periodic vortex shedding. When the system is unstable, these two flame edges oscillate together as a result of high-intensity longitudinal-mode acoustic oscillations in the combustor that drive periodic vortex shedding at each of the nozzle exits. In the stable cases, however, the phase between the oscillations of the center and outer flame edges is greater than 90 degrees (~114 degrees), suggesting that the phase-cancellation hypothesis may be valid. This analysis allows a better understanding of the instantaneous flame dynamics behind flame edge oscillation phase offset and fuel staging-based instability suppression.

Doleiden, Daniel↗

The Impact of Harness Impedance on Hall Thruster Discharge Oscillations

Hall thrusters exhibit characteristic discharge voltage and current oscillations during steady-state operation. The lower frequency breathing-mode current oscillations are inherent to each thruster and could impact thruster operation and power processing unit (PPU) design. The design of the discharge output filter, in particular, the output capacitor is important because it supplies the high peak current oscillations that the thruster demands. However, space-rated, high-voltage capacitors are not readily available and can have significant mass and volume. So, it is important for a PPU designer to know what is the minimum amount of capacitance required to operate a thruster. Through Simulation Program with Integrated Circuit Emphasis modeling and electrical measurements on the Hall Effect Rocket with Magnetic Shielding thruster, it was shown that the harness impedance between the power supply and the thruster is the main contributor towards generating voltage ripple at the thruster. Also, increasing the size of the discharge filter capacitor, as previously implemented during thruster tests, does not reduce the voltage oscillations. The electrical characteristics of the electrical harness between the discharge supply and the thruster is crucial to system performance and could have a negative impact on performance, life and operation.

hollow cathodes↗

The Impact of Harness Impedance on Hall Thruster Discharge Oscillations

Hall thrusters exhibit characteristic discharge voltage and current oscillations during steady-state operation. The lower frequency breathing-mode current oscillations are inherent to each thruster and could impact thruster operation and power processing unit (PPU) design. The design of the discharge output filter, in particular, the output capacitor is important because it supplies the high peak current oscillations that the thruster demands. However, space-rated, high-voltage capacitors are not readily available and can have significant mass and volume. So, it is important for a PPU designer to know what is the minimum amount of capacitance required to operate a thruster. Through Simulation Program with Integrated Circuit Emphasis modeling and electrical measurements on the Hall Effect Rocket with Magnetic Shielding thruster, it was shown that the harness impedance between the power supply and the thruster is the main contributor towards generating voltage ripple at the thruster. Also, increasing the size of the discharge filter capacitor, as previously implemented during thruster tests, does not reduce the voltage oscillations. The electrical characteristics of the electrical harness between the discharge supply and the thruster is crucial to system performance and could have a negative impact on performance, life and operation.

ion engines↗

The Impact of Harness Impedance on Hall Thruster Discharge Oscillations

Hall thrusters exhibit characteristic discharge voltage and current oscillations during steady-state operation. The lower frequency breathing-mode current oscillations are inherent to each thruster and could impact thruster operation and PPU design. The design of the discharge output filter, in particular, the output capacitor is important because it supplies the high peak current oscillations that the thruster demands. However, space-rated, high-voltage capacitors are not readily available and can have significant mass and volume. So, it is important for a PPU designer to know what is the minimum amount of capacitance required to operate a thruster. Through SPICE modeling and electrical measurements on the Hall Effect Rocket with Magnetic Shielding (HERMeS) thruster, it was shown that the harness impedance between the power supply and the thruster is the main contributor towards generating voltage ripple at the thruster. Also, increasing the size of the discharge filter capacitor, as previously implemented during thruster tests, does not reduce the voltage oscillations. The electrical characteristics of the electrical harness between the discharge supply and the thruster is crucial to system performance and could have a negative impact on performance, life and operation.

Pinero, Luis R.↗

Transverse Mode Coupling Instability of the Bunch with Oscillating Wake Field and Space Charge

Transverse mode coupling instability of a single bunch caused by oscillating wake field is considered in the paper. The instability threshold is found at different frequencies of the wake with space charge tune shift taken into account. The wake phase advance in the bunch length from 0 up to $4\pi$ is investigated. It is shown that the space charge can push the instability threshold up or down dependent on the phase advance. Transition region is investigated thoroughly, and simple asymptotic formulas for the threshold are represented.

43 PARTICLE ACCELERATORS↗

Initial high-degree p-mode frequency splittings from the 1988 Mt. Wilson 60-foot Tower Solar Oscillation Program

The initial frequency splitting results of solar p-mode oscillations obtained from the 1988 helioseismology program at the Mt. Wilson Observatory are presented. The frequency splittings correspond to the rotational splittings of sectoral harmonics which range in degree between 10 and 598. They were obtained from a cross-correlation analysis of the prograde and retrograde portions of a two-dimensional (t - v) power spectrum. This power spectrum was computed from an eight-hour sequence of full-disk Dopplergrams obtained on July 2, 1988, at the 60-foot tower telescope with a Na magneto-optical filter and a 1024x1024 pixel CCD camera. These frequency splittings have an inherently larger scatter than did the splittings obtained from earlier 16-day power spectra. These splittings are consistent with an internal solar rotational velocity which is independent of radius along the equatorial plane. The normalized frequency splittings averaged 449 + or - 3 nHz, a value which is very close to the observed equatorial rotation rate of the photospheric gas of 451.7 nHz.

Rhodes, Edward J., Jr.↗

An Experimental Investigation of the Damping of Liquid Oscillations in an Oblate Spheroidal Tank With and Without Baffles

An experimental investigation was conducted to determine the damping of the fundamental antisymmetric mode of oscillation of liquids contained in an oblate spheroidal tank. The decay of the fundamental mode was studied for a range of liquid depths in tanks with and without baffles. In the investigation of baffle effects, ring and cruciform baffles of various sizes were fixed at different locations within the tank. Data presented show the variation of the damping factor with tank fullness and with baffle type, width, location, and orientation as well as the effects of the amplitude of the liquid oscillations and of small variations in the liquid kinematic viscosity on the damping factor. The results of the investigation indicate that the addition of ring baffles to the tank results in an increase in the available effective damping when the baffle plane is in a region near the equilibrium liquid surface, and that cruciform baffles are effective in the damping of the fundamental mode in the near-empty tank. No apparent changes in damping for the tanks having ring baffles were observed as the kinematic viscosity of the liquid was varied over a small range.

Stephens, David G.↗

QUASI-PERIODIC FAST-MODE WAVE TRAINS WITHIN A GLOBAL EUV WAVE AND SEQUENTIAL TRANSVERSE OSCILLATIONS DETECTED BY SDO/AIA

We present the first unambiguous detection of quasi-periodic wave trains within the broad pulse of a global EUV wave (so-called EIT wave) occurring on the limb. These wave trains, running ahead of the lateral coronal mass ejection (CME) front of 2-4 times slower, coherently travel to distances {approx}> R{sub Sun }/2 along the solar surface, with initial velocities up to 1400 km s{sup -1} decelerating to {approx}650 km s{sup -1}. The rapid expansion of the CME initiated at an elevated height of 110 Mm produces a strong downward and lateral compression, which may play an important role in driving the primary EUV wave and shaping its front forwardly inclined toward the solar surface. The wave trains have a dominant 2 minute periodicity that matches the X-ray flare pulsations, suggesting a causal connection. The arrival of the leading EUV wave front at increasing distances produces an uninterrupted chain sequence of deflections and/or transverse (likely fast kink mode) oscillations of local structures, including a flux-rope coronal cavity and its embedded filament with delayed onsets consistent with the wave travel time at an elevated (by {approx}50%) velocity within it. This suggests that the EUV wave penetrates through a topological separatrix surface into the cavity, unexpected from CME-caused magnetic reconfiguration. These observations, when taken together, provide compelling evidence of the fast-mode MHD wave nature of the primary (outer) fast component of a global EUV wave, running ahead of the secondary (inner) slow component of CME-caused restructuring.

79 ASTRONOMY AND ASTROPHYSICS↗

Barotropic oscillations of the Mediterranean and Adriatic Seas

Calculations of the periods and structures of several of the lowest barotropic free modes of oscillation of the combined Mediterranean-Adriatic Basin are presented which take into account basin morphometry, bottom topography and the earth's rotation. The numerical calculations, based on a Galerkin procedure developed by Rao and Schwab (1976), were first carried out to find the normal modes of the combined Mediterranean-Adriatic system at a resolution of 1 deg on a Mercator projection, and used to determine the mouth of the Adriatic, which was then examined on a finer grid without rotation. Comparison of the periods of the lowest gravitational modes of the Mediterranean Sea under different conditions show the most significant effect to be due to variable basin topography. Periods of 38.5, 11.4, 8.4 and 7.4 h are computed for the lowest modes of the Mediterranean Sea, while periods of 21.9, 10.7 and 6.7 h are computed for the Adriatic, in agreement with observed periods.

Schwab, D. J.↗