Search NASA⌕ Search

SEARCH · Search NASA

Results for “Optical signal processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Method for monitoring/managing electrochemical energy device by detecting intercalation stage changes

A method for determining an operating state (e.g., state-of-charge or state-of-health) and/or generating management (charge/discharge) control information in a system including an electrochemical energy device (EED, e.g., a rechargeable Li-ion battery, supercapacitor or fuel cell) that uses optical sensors to detect the intercalation stage change events occurring in the EED. The externally or internally mounted optical sensors measure operating parameter (e.g., strain and/or temperature) changes of the EED during charge/recharge cycling, and transmit measured parameter data using light signals sent over optical fibers to a detector/converter. A processor then analyzes the measured parameter data, e.g., using a model-based estimation process, to detect intercalation stage changes (i.e., crystalline structure changes caused by migration of guest species, such as Li-ions, between the EED's anode and cathode), and generates the operating state and charge/discharge control information based the analysis.

25 ENERGY STORAGE↗

Frequency stabilization of a 1083 nm fiber laser to {sup 4}He transition lines with optical heterodyne saturation spectroscopies

Two kinds of optical heterodyne saturation spectroscopies, namely, frequency modulation spectroscopy (FMS) and modulation transfer spectroscopy (MTS), are demonstrated for locking a fiber laser to the transition lines of metastable {sup 4}He atoms around 1083 nm. The servo-loop error signals of FMS and MTS for stabilizing laser frequency are optimized by studying the dependence of the peak-to-peak amplitude and slope on the optical power of pump and probe beams. A comparison of the stabilization performances of FMS/MTS and polarization spectroscopy (PS) is presented, which shows that MTS exhibits relatively superior performance with the least laser frequency fluctuation due to its flat-background dispersive signal, originated from the four-wave mixing process. The Allan deviation of the stabilized laser frequency is 5.4 × 10{sup −12}@100 s with MTS for data acquired in 1000 s, which is sufficiently applicable for fields like laser cooling, optical pumping, and optical magnetometry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Advanced Dispersed Fringe Sensing Algorithm for Coarse Phasing Segmented Mirror Telescopes

Segment mirror phasing, a critical step of segment mirror alignment, requires the ability to sense and correct the relative pistons between segments from up to a few hundred microns to a fraction of wavelength in order to bring the mirror system to its full diffraction capability. When sampling the aperture of a telescope, using auto-collimating flats (ACFs) is more economical. The performance of a telescope with a segmented primary mirror strongly depends on how well those primary mirror segments can be phased. One such process to phase primary mirror segments in the axial piston direction is dispersed fringe sensing (DFS). DFS technology can be used to co-phase the ACFs. DFS is essentially a signal fitting and processing operation. It is an elegant method of coarse phasing segmented mirrors. DFS performance accuracy is dependent upon careful calibration of the system as well as other factors such as internal optical alignment, system wavefront errors, and detector quality. Novel improvements to the algorithm have led to substantial enhancements in DFS performance. The Advanced Dispersed Fringe Sensing (ADFS) Algorithm is designed to reduce the sensitivity to calibration errors by determining the optimal fringe extraction line. Applying an angular extraction line dithering procedure and combining this dithering process with an error function while minimizing the phase term of the fitted signal, defines in essence the ADFS algorithm.

Spechler, Joshua A.↗

Synthesis, characterization and optical properties of ATiO{sub 3}–Pr thin films prepared by a photochemical method (where A = Ba and Ca)

Highlights: • A method of photochemical deposition has been used to the preparation of (Ba,Ca)TiO{sub 3} thin films doped Pr(III). • The (Ba,Ca)TiO{sub 3}/Pr(III) films under 375 nm excitation shows emissions attributable to {sup 1}D{sub 2} → {sup 3}H{sub 4} transition of Pr ion. • These PL signals decreased above 10 mol% of Pr(III). • Analysis suggests the presence of intermediate energy levels in the band gap influences in the PL processes. - Abstract: This article reports the characterization and optical properties of (Ba,Ca)TiO{sub 3} thin films doped with Pr at different proportions (0–15 mol%). The films were deposited on Si (1 0 0) and quartz substrates using a photochemical method and post-annealed at 900 °C. The evaluation of photo-reactivity of the precursor complexes was monitored by UV–vis and FT-IR spectroscopy. The obtained films were characterized by X-ray diffraction and X-ray photoelectron spectroscopy. The results indicate that Ba, Ca, Ti, O and Pr are present in the form of perovskite. Under UV light excitation (375 nm) the (Ba,Ca)TiO{sub 3}–Pr films show the characteristic emissions ascribed to {sup 1}D{sub 2} → {sup 3}H{sub 4} transition of Pr{sup 3+} ion. The optical measurements show the presence of intermediate energy levels in the band gap which influence the emission processes.

36 MATERIALS SCIENCE↗

Monitoring and Control of Chemical Composition of InGaN Layers During MOCVD

This Department of Energy SBIR Phase II grant targets the inefficiency of the epitaxial processes used to deposit wide band-gap semiconductor thin films that are an essential part of the next generation high-brightness LEDs for solid state lighting. Non-uniformity of the layers over a single wafer and non-repeatability over the wafers in a single batch, separate batches and separate reactors are some of the primary source of reduced manufacturing yield. The team performed extensive research, development and validation of an in-situ spectroscopic optical monitoring and epitaxial process control system. The system monitors the LED thin films as they grow on the individual wafers inside the epitaxial reactor, records the signal in a broad spectral range and processes the information to retrieve essential film quality parameters and their variation over a single wafer, all the wafers in a batch and multiple batches. A novel software algorithm is implemented, which performs real-time spectral pattern recognition and displays any abnormalities or differences in the deposition, which is used by the engineer to optimize the epitaxial process. The project resulted in the optimization of the LED film growth and improvement of its uniformity and repeatability, reducing the cost of the final LED devices.

36 MATERIALS SCIENCE↗

Adiabatic frequency shifting in epsilon-near-zero materials: the role of group velocity

The conversion of a photon’s frequency has long been a key application area of nonlinear optics. It has been discussed how a slow temporal variation of a material’s refractive index can lead to the adiabatic frequency shift (AFS) of a pulse spectrum. Such a rigid spectral change has relevant technological implications, for example, in ultrafast signal processing. Here, we investigate the AFS process in epsilon-near-zero (ENZ) materials and show that the frequency shift can be achieved in a shorter length if operating in the vicinity of R e { ε <#comment/> r } = 0 . We also predict that, if the refractive index is induced by an intense optical pulse, the frequency shift is more efficient for a pump at the ENZ wavelength. Remarkably, we show that these effects are a consequence of the slow propagation speed of pulses at the ENZ wavelength. Our theoretical predictions are validated by experiments obtained for the AFS of optical pulses incident upon aluminum zinc oxide thin films at ENZ. Our results indicate that transparent metal oxides operating near the ENZ point are good candidates for future frequency conversion schemes.

36 MATERIALS SCIENCE↗

Holographic signal processing for control of a flexible beam

A robust control system is presented for damping vibrations in a cantilevered beam. The distributed deflections of the beam are sensed using real-time holography. A hybrid processor which uses optical and digital processors is proposed to implement a distributed control algorithm. The controller is designed using the linear-quadratic-Gaussian method to add damping to a finite number of vibrational modes.

Barsky, Michael F.↗

Detecting keyhole porosity and monitoring process signatures in additive manufacturing: an in situ pyrometry and ex situ X-ray radiography correlation

Creation of pores and defects during laser powder bed fusion (LPBF) can lead to poor mechanical properties and thus must be minimized. Post-build inspection is required to ensure the printed parts contain acceptably low defect concentrations. These inspections are time consuming and costly, especially for large or complex parts. As a potential solution, in situ process monitoring can be used to detect the creation of defects, characterize local material behavior and predict expected component properties. However, the precise relationship between pore creation and in situ process monitoring still needs to be understood. In this work, high-speed infrared diode-based pyrometry and high-speed optical imaging signals were used to monitor LPBF printing of 446 stainless steel 316 L single tracks with varying laser power and velocity. Results indicate an increase in pyrometer signal and melt pool dimensions with increasing laser power and decreasing velocity in agreement with previous work. In addition, careful analysis of pyrometer signal reveals a distinct signature of the conduction-to-keyhole mode transition which was confirmed by metallography. Critically, pore defect initiation as characterized by ex situ X-ray radiography was correlated with in situ thermal monitoring signals to derive the probability of defect creation. Our results show that, in principle, a probabilistic prediction of pore formation can be achieved based on in situ high-speed pyrometry monitoring of the LPBF melt pool.

36 MATERIALS SCIENCE↗

Near-resonance spin-noise spectroscopy

Spectroscopy of atomic spin noise allows the determination of many sample properties such as energy-level structures and transverse-spin relaxation rates without the need to drive the system away from equilibrium with applied fields. Analysis of noise measurements can also reveal the processes that limit the sensitivity of a measured signal. Standard methods for spectroscopic noise measurements in atomic vapors rely on far-off-resonant optical probing. We present a method for investigating spin noise with a probe beam frequency relatively close to resonance and show how the back action of the probe on the atomic state can be subtracted from the recorded noise spectra. We verify this method experimentally by showing noise data that scale with the square root of the number of atoms, after the probe back action has been properly subtracted.

74 ATOMIC AND MOLECULAR PHYSICS↗

On-chip non-Hermitian optical parametric amplifiers with a large bandwidth

Recently, our groups have introduced the notion of optical parametric amplification based on non-Hermitian phase matching wherein the incorporation of loss can lead to gain in this nonlinear optical process. Previous simulation results using second-order nonlinear optical coupled-mode theory have demonstrated the potential of this technique as an alternative to the stringent phase-matching condition, which is often difficult to achieve in semiconductor platforms. Here we fortify this notion for the case of third-order nonlinearity by considering parametric amplification in silicon nanowires and illustrate the feasibility of these devices by employing rigorous finite-difference time-domain analysis using realistic materials and geometric parameters. Particularly, we demonstrate that by systematic control of the optical loss of the idler in a four-wave mixing process, we can achieve efficient unidirectional energy conversion from the pump to the signal component even when the typical phase-matching condition is violated. Importantly, our simulations show that a signal gain of ∼ <#comment/> 9 d B for a waveguide length of a few millimeters is possible over a large bandwidth of several hundreds of nanometers ( ∼ <#comment/> 600 n m ). This bandwidth is nearly 2 orders of magnitude larger than what can be achieved in the conventional silicon-photonics-based four-wave mixing process.

Ahmed, Asif (ORCID:0000000152234392)↗

A Laser Interferometric Miniature Sensor

This is the second year of a Phase II Small Business Innovation Research (SBIR) contract geared towards the development of a new seismic sensor. Ground-based seismic monitoring systems have proven to be very capable in identifying nuclear tests, and can provide somewhat precise information on the location and yield of the explosive device. Making these measurements, however, currently requires very expensive and bulky seismometers that are difficult to deploy in places where they are most needed. A high performance, compact device can enable rapid deployment of large scale arrays, which can in turn be used to provide higher quality data during times of critical need. The use of a laser interferometer-based device has shown considerable promise, while also presenting significant challenges. The greatest strength of this optical readout technique is the ability to decouple the mechanical design from the transducer, thus enabling a miniaturized design that is not accessible with conventional sensing techniques. However, the nonlinearity in the optical response must be accounted for in the sensor output. Previously, we had proposed using a force-feedback approach to position the sensor at a point of maximum linearity. However, it can be shown that the combined nonlinearities of the optical response and the force-feedback curve necessarily results in a significant amount of unwanted noise at low frequencies. Having realized this, we have developed a new approach that eliminates force feedback, allowing the proof mass to move freely at all times. This takes advantage of some advanced optical spatial filtering that was developed at Symphony Acoustics for other types of sensors, and was recently adapted to this work. After processing the signals in real time, the digital output of the device is intrinsically linear, and the sensor can operate at any orientation with the same level of resolution, while instantly adapting to significant changes in orientation. Ultimately, we expect the dynamic range to be up to 180 dB. Currently, we have observed the noise floor in a 0.1 Hz to 10 Hz bandwidth to be near -160 dB/Hz relative to 1 m2/s4. To meet the objectives of this program, we are finalizing the design of a 3 axis sensor for shallow borehole deployments, with a diameter of 40 mm and a length a 150 mm.

47 OTHER INSTRUMENTATION↗

Characterization of Infrasonic Signatures of Earth-Grazing Fireballs as Analogues to Hypersonic Vehicles (Final Report)

Accurate detection, discrimination, and characterization of high-altitude hypersonic events using infrasonic monitoring are critical to planetary defense and global strategic surveillance. This report synthesizes recent advances achieved through rigorous analysis of infrasonic signatures from natural meteoroids, emphasizing shallow entry-angle meteoroids as essentially proxies for artificial hypersonic systems. Meteoroids naturally encompass diverse velocities, trajectories, altitudes, and fragmentation behaviors, enabling systematic validation of empirical period–yield relationships, waveform morphology classifiers, and trajectory-induced back-azimuth deviation models. Integration of adaptive array-processing enhancements within Cardinal software further extends infrasonic detection sensitivity and signal classification reliability. Collectively these advances, based solely on infrasonic signatures or limited optical data, offer robust methodologies for distinguishing natural from artificial hypersonic sources, significantly reducing event geolocation uncertainties and refining source-function determination. The outcomes detailed herein lay foundational groundwork for improved global hypersonic event-surveillance frameworks, supporting improved security preparedness and informing strategic monitoring and defense policies.

54 ENVIRONMENTAL SCIENCES↗

Laser Doppler spectrometer method of particle sizing

A spectrometer for the detection of airborne particulate pollution in the submicron size range is described. In this device, airborne particles are accelerated through a supersonic nozzle, with different sizes achieving different velocities in the gas flow. Information about the velocities of the accelerated particles is obtained with a laser-heterodyne optical system through the Doppler shift of light scattered from the particles. Detection is accomplished by means of a photomultiplier. Nozzle design and signal processing techniques are also discussed.

Weber, F. N.↗

Apparatus and Method for Elimination of Polarization-Induced Fading in Fiber-optic Sensor System

The invention is an apparatus and method of eliminating polarization-induced fading in interferometric fiber-optic sensor system having a wavelength-swept laser optical signal. The interferometric return signal from the sensor arms are combined and provided to a multi-optical path detector assembly and ultimately to a data acquisition and processing unit by way of a switch that is time synchronized with the laser scan sweep cycle.

Chan, Hon Man↗

A High Dynamic-Range Photon-Counting Receiver for Deep Space Optical Communication

The Deep Space Optical Communication (DSOC) project will demonstrate free-space optical communication at almost 3 AU, or 3 orders of magnitude further than any previous attempt. DSOC will utilize the 5m Palomar Hale Telescope to receive the downlink signal, which will couple the downlink light onto an optical table and into a superconducting nanowire single photon detector (SNSPD). The output of the SNSPD is digitized by the Ground Laser Receiver Signal Processing Assembly (GSPA) using a high throughput streaming time to digital converter (TDC). The GSPA is a scalable FPGA-based receiver which demodulates and decodes the DSOC downlink signal through novel signal processing algorithms implemented on Xilinx UltraScale+ FPGAs, as well as Python-based software monitor and control routines. Exploiting the unique TDC-based architecture, the GSPA supports over four orders of magnitude of downlink data rates across multiple orders of magnitude of signal and background powers. In this paper we present an overview of the hardware, firmware and software architectures to implement this system, as well as performance analysis for links ranging from near-Earth to 2.8 AU.

Srinivasan, Meera↗

The Additive Manufacturing Moment Measure (AM3) Approach to Predictions of Solid Cooling Rate and Time Above Melt

Qualification of a laser powder bed fusion additive manufacturing (LPBF-AM) process requires knowledge of the multi-scale material physics during the process, per part. As the LPBF-AM build occurs, each moment is influenced by the process history. Knowledge of the build sequence can be used to generate a discretized time-space-condition point field that when coupled with a nearest neighbors’ calculation results in a generalized and fully parallel process model computation. This GPU accelerated approach was developed for part-scale analysis of build files along with in-situ process monitoring sensor data and is termed the “Additive Manufacturing Moment Measure” (AM3). The AM3 approach will be presented and then used to evaluate an AM Bench relevant geometry with synchronized in-situ process data, ex-situ nondestructive evaluation, and optical microscopy observations. These comparisons permit a better understanding of how the process actions can affect the LPBF-AM build quality and the signals generated during in-situ process monitoring.

Additive Manufacturing↗

Shifting scintillator neutron detector

Provided are sensors and methods for detecting thermal neutrons. Provided is an apparatus having a scintillator for absorbing a neutron, the scintillator having a back side for discharging a scintillation light of a first wavelength in response to the absorbed neutron, an array of wavelength-shifting fibers proximate to the back side of the scintillator for shifting the scintillation light of the first wavelength to light of a second wavelength, the wavelength-shifting fibers being disposed in a two-dimensional pattern and defining a plurality of scattering plane pixels where the wavelength-shifting fibers overlap, a plurality of photomultiplier tubes, in coded optical communication with the wavelength-shifting fibers, for converting the light of the second wavelength to an electronic signal, and a processor for processing the electronic signal to identify one of the plurality of scattering plane pixels as indicative of a position within the scintillator where the neutron was absorbed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optomechanical gyroscope utilizing the Sagnac effect

An apparatus and a method for detecting rotation based on the Sagnac effect is disclosed. Input light having sufficient power is injected into a circulating optical resonator to thereby excite an optomechanical oscillation of the resonator at an instantaneous mechanical angular frequency. Rotation of the circulating optical resonator causes a change in a frequency of the optomechanical oscillation of the resonator, which in turn causes the instantaneous mechanical angular frequency to change. The optomechanical oscillation produces modulation sidebands in the resonating optical field at the instantaneous mechanical angular frequency and harmonics thereof, which are demodulated from the optical frequency by detection in a photodetector. Differences in the instantaneous mechanical angular frequency induced by rotation are detected by processing the photodetector output signal.

47 OTHER INSTRUMENTATION↗