Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA LAYER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Rocket/Radar Sporadic-E Experiment Conducted during the El Coqui 2 Campaign

In order to investigate the complex electrodynamics and neutral-plasma coupling inherent to sporadic-E layers in the earth's mid-latitude ionosphere, a series of rocket/radar experiments were planned as part of the NASA El Coqui H Campaign from Tortuguero Launch Range, Puerto Rico, in March-April, 1998. The rocket experiments consisted of two pairs of "mother-daughter" payloads with limited apogees so that the payloads "hovered" in the sporadic-E region (95-125 km). Each payload pair included vector DC and AC electric field detectors, a highly accurate flux-gate DC magnetometer, an ion mass spectrometer, an ionization gauge, and spaced-electric field receivers to measure the wavelength and phase velocity of the unstable plasma waves. Separate rockets were included to simultaneously carry aloft TMA trails to measure the neutral wind and its velocity shear, believed responsible for the sporadic-E layer formation. In addition to the rocket experiments, incoherent scatter radar measurements of plasma density and drift velocity were gathered almost every night during the 3 week campaign. Continuous VHF backscatter radar operations were carried out from a site near Salinas, Puerto Rico, where 3-m backscatter echoes were observed associated with sporadic-E and other types of low altitude ionospheric layers. Other radars that operated during the campaign included an HF backscatter system near Ponce, Puerto Rico, and a second VHF backscatter radar set up near Aguadila Puerto Rico. On 24 March 1998, one of the instrumented rockets was launched, attaining an apogee of 129 km. The payloads successfully pierced an intense sporadic-E layer observed by both the Arecibo radar and the in-situ density and ion mass spectrometer probes. In-situ DC electric fields revealed very low (about 1-2 mV/m) ambient fields with small amplitude structures of the same order. No high frequency (short scale) waves were observed, consistent with the VHF backscatter observations at the time of the launch. An overview of the observations will be presented.

Pfaff, R.F.↗
NASA NTRS1986

Threshold determining mechanisms for discharges in high voltage solar arrays

A theory is developed to account for the observed properties of discharges of solar arrays immersed in plasma. The theory is based on the assumption that a thin layer of insulating contaminant covers any metallic surface exposed to the plasma. Quantities derivable from the theory include a voltage threshold for arcing. The existence of the threshold and its predicted weak dependence on plasma density appear consistent with experimental results.

Parks, D. E.↗
NASA NTRS1986

A statistical study of the central plasma sheet - Implications for substorm models

The University of Iowa Lepedea on board ISEE 1 is used to investigate the characteristics of the central plasma sheet under all levels of geomagnetic activity. Positive ion responses from 1 eV to 45 keV are used in this study. All the periods during 1978 when the central plasma sheet is encountered are included. This study excludes all boundary layer samples. The results of this study show that the central plasma sheet consists of plasma with high thermal energy (several keV) but low bulk speeds. This remains true even during high geomagnetic activity. The main effect of increasing activity is heating of the plasma sheet, preferentially at the high-latitude boundaries.

Huang, C. Y.↗
NASA NTRS1974

Dissipation of energy in model experiments

Interaction studies of a plasma stream with a magnetic dipole have shown that the thickness of the plasma/field interlayer is considerably greater than the characteristic plasma dimension c/omega sub 0. Broadening of the layer is due to the formation of a collisionless shock wave. To demonstrate collisionless dissipation, the Joulean losses were calculated using the conductivity value obtained from the skin layer thickness. Analysis of the various physical processes showed that the hypothesis of collisionless dissipation of the directional plasma flow is justified.

Podgornyy, I. M.↗
NASA NTRS1982

On the relationship of the plasmapause to the equatorward boundary of the auroral oval and to the inner edge of the plasma sheet

ISEE 1 observations of the plasmapause are compared with simultaneous observations of the electron plasma sheet and also the auroral oval observed in DMSP photographs. Only a limited amount of appropriate data was available for the comparisons: the plasmapause/plasma sheet inner edge comparisons were restricted to the early and late morning sectors, while there were two satisfactory comparisons of the plasmapause and the equatorward boundary of the auroral oval in the evening sector. However, these examples indicate that the plasmapause location often coincides to within a change in L of about 0.1-0.2 with both the plasma sheet inner boundary and the field line threading the equatorward boundary of the auroral oval. This co-location of the plasmapause and the plasma sheet inner edge may be due to shielding of the magnetospheric convection electric field by an Alfven layer located at the inner edge of the plasma sheet as discussed by Jaggi and Wolf (1973) and others.

Horwitz, J. L.↗
NASA NTRS2001

Modeling Magnetospheric Sources

We have used global magnetohydrodynamic, simulations of the interaction between the solar wind and magnetosphere together with single particle trajectory calculations to investigate the sources of plasma entering the magnetosphere. In all of our calculations solar wind plasma primarily enters the magnetosphere when the field line on which it is convecting reconnects. When the interplanetary magnetic field has a northward component the reconnection is in the polar cusp region. In the simulations plasma in the low latitude boundary layer (LLBL) can be on either open or closed field lines. Open field lines occur when the high latitude reconnection occurs in only one cusp. In the MHD calculations the ionosphere does not contribute significantly to the LLBL for northward IMF. The particle trajectory calculations show that ions preferentially enter in the cusp region where they can be accelerated by non-adiabatic motion across the high latitude electric field. For southward IMF in the MHD simulations the plasma in the middle and inner magnetosphere comes from the inner (ionospheric) boundary of the simulation. Solar wind plasma on open field lines is confined to high latitudes and exits the tailward boundary of the simulation without reaching the plasma sheet. The LLBL is populated by both ionospheric and solar wind plasma. When the particle trajectories are included solar wind ions can enter the middle magnetosphere. We have used both the MHD simulations and the particle calculations to estimate source rates for the magnetosphere which are consistent with those inferred from observations.

Walker, Raymond J.↗
NASA NTRS1992

Extrapolation of electrical breakdown currents from the laboratory to Space Station

Recent experiments conducted in a plasma chamber at NASA/MSFC on anodized aluminum coatings representative of Space Station Freedom design show that if the aluminum used as a thermal control coating is biased more than 80 V negative with respect to the plasma, the anodization will experience dielectric breakdown. As the thin anodization layer creates a capacitive charge buildup, large currents are observed during the arc. How plasma generation at the arc site can support large currents and discharge the surface charge layer is investigated. The importance for Space Station Freedom is that currents similar to those observed in the laboratory can be observed on orbit.

Vaughn, Jason A.↗
NASA NTRS1982

Plasma waves near the magnetopause

Plasma waves associated with the magnetosphere from the magnetosheath to the outer magnetosphere are investigated to obtain a clear definition of the boundaries and regions, to characterize the waves observed in these regions, to determine which wave modes are present, and to determine their origin. Emphasis is on high time resolution data and a comparison between measurements by different antenna systems. It is shown that the magnetosheath flux transfer events, the magnetopause current layer, the outer magnetosphere, and the boundary layer can be identified by their magnetic field and plasma wave characteristics, as well as by their plasma and energetic particle signatures. The plasma wave characteristics in the current layer and in the boundary layer are very similar to the features in the flux transfer events, and upon entry into their outer magnetosphere, the plasma wave spectra are dominated by intense electromagnetic chorus bursts and electrostatic emissions.

Anderson, R. R.↗
NASA NTRS1976

Electrostatic shocks as nonlinear ion acoustic waves

A cold fluid approach is presented which yields exact double-layer solutions that can be used to model electrostatic S-type shocks. Solutions derived from the two-temperature electron model are presented in order to show the range of amplitudes and scale lengths possible for this plasma model and to examine how shock properties depend on orientation of the shock. The dependence of various double-layer quantities on plasma composition is then considered for the cold electron beam model. Double-layer solutions pertinent to describing electrostatic shocks are pointed out.

Witt, E.↗
NASA NTRS1995

The Geopause

Coupled to the Earth and protected by the geomagnetic field, terrestrial matter in the plasma state dominates a larger region of space than was suspected when the 'space age' began, a region we refer to as the geosphere. Accelerated and heated by solar wind energy, this matter expands in size and increases in mass density in response to the Sun's ultraviolet spectrum, heliospheric conditions, and the occurrence of severe space storms. Such storms regularly damage spacecraft, interfere with communications, and trigger power grid interruptions or failures. They occur within the geopause region, that is, the volume defined by the limits of the instantaneous boundary between plasmas that are primarily heliospheric and geospheric. The geopause is analogous in some ways to the heliopause but also resembles the terrestrial air-sea interface. It is the boundary layer across which the supersonically expanding solar plasma delivers momentum and energy to the terrestrial plasma and gas, exciting them into motion, 'evaporating' them into space, and dissipating considerable amounts of power in thermal forms, while generating energetic particles through repeated storage and explosive release of electromagnetic energy. The intensity of the solar wind and the orientation of its magnetic field jointly control the strength of the coupling between solar and terrestrial plasmas and hence the occurrence of severe storms in the geopause region.

Moore, T. E.↗
NASA NTRS1985

ISEE-1 and 2 observations of field-aligned currents in the distant midnight magnetosphere

Magnetic field measurements obtained in the nightside magnetosphere by the co-orbiting ISEE-1 and 2 spacecraft have been examined for signatures of field-aligned currents (FAC). Such currents are found on the boundary of the plasma sheet both when the plasma sheet is expanding and when it is thinning. Evidence is often found for the existence of waves on the plasma sheet boundary, leading to multiple crossings of the FAC sheet. At times the boundary layer FAC sheet orientation is nearly parallel to the X-Z GSM plane, suggesting 'protrusions' of plasma sheet into the lobes. The boundary layer current polarity is, as expected, into the ionosphere in the midnight to dawn local time sector, and outward near dusk. Current sheet thicknesses and velocities are essentially independent of plasma sheet expansion or thinning, having typical values of 1500 km and 20-40 km/s respectively. Characteristic boundary layer current densities are about 10 nanoamps per square meter.

Elphic, R. C.↗
NASA NTRS1990

Cold ion beams in the low latitude boundary layer during accelerated flow events

Measurements made with the Fast Plasma Experiment on ISEE 1 and 2 reveal that accelerated beams of cold (1-30 eV for H/+/) ions are present sporadically on reconnected field lines within the low latitude boundary layer (LLBI). H(+) normally is the major constituent of these beams, but He(+) and O(+) are also occasionally detected in variable concentrations. Because of the low temperatures and the compositional makeup of these beams, the ionosphere must ultimately be the source of these ions. Observed beam speeds (between 120 and 250 km/s) are always less than that of the magnetosheath ions which penetrate into the LLBL on reconnected field lines, but both ion populations share the same E x B convective drift. Analysis reveals that reflection at the magnetopause cannot be the mechanism accelerating these ions. A more likely possibility is that the ions are accelerated primarily by the large transverse drift of recently reconnected field lines.

Gosling, J. T.↗
NASA NTRS1991

Ion distributions at the dayside magnetopause

Ion phase space distribution, from the AMPTE UKS ion instrument, for a crossing of the dayside magnetopause on October 2, 1984, during typical southward IMF conditions are presented. D-shaped field-aligned phase space distributions of magnetosheath plasma earthward of and hot magnetospheric ions sunward of the magnetopause current layer are observed. The existence of such D-shaped magnetosheath plasma distributions has been predicted as a signature of reconnection. In addition, the observed ion distributions are in stress balance across the magnetopause, and the de Hoffman-Teller frame velocity obtained from the stress balance calculation is in agreement with the observed distribution function cutoff speed. These new observations thus provide further evidence that, at least for southward IMF conditions, reconnection is an important mechanism by which solar wind plasma penetrates into the magnetosphere.

Smith, M. F.↗
NASA NTRS2005

Making AlN(x) Tunnel Barriers Using a Low-Energy Nitrogen-Ion Beam

A technique based on accelerating positive nitrogen ions onto an aluminum layer has been demonstrated to be effective in forming thin (<2 nm thick) layers of aluminum nitride (AlN(x)) for use as tunnel barriers in Nb/Al-AlN(x)/Nb superconductor/insulator/ superconductor (SIS) Josephson junctions. AlN(x) is the present material of choice for tunnel barriers because, to a degree greater than that of any other suitable material, it offers the required combination of low leakage current at high current density and greater thermal stability. While ultra-thin AlN films with good thickness and stoichiometry control are easily formed using techniques such as reactive molecular beam epitaxy and chemical vapor deposition, growth temperatures of 900 C are necessary for the dissociative adsorption of nitrogen from either nitrogen (N2) or ammonia (NH3). These growth temperatures are prohibitively high for the formation of tunnel barriers on Nb films because interfacial reactions at temperatures as low as 200 to 300 C degrade device properties. Heretofore, deposition by reactive sputtering and nitridation of thin Al layers with DC and RF nitrogen plasmas have been successfully used to form AlN barriers in SIS junctions. However, precise control over critical current density Jc has proven to be a challenge, as is attaining adequate process reproducibility from system to system. The present ion-beam technique is an alternative to the plasma or reactive sputtering techniques as it provides a highly controlled arrival of reactive species, independent of the electrical conditions of the substrate or vacuum chamber. Independent and accurate control of parameters such as ion energy, flux, species, and direction promises more precise control of film characteristics such as stoichiometry and thickness than is the case with typical plasma processes. In particular, the background pressure during ion-beam nitride growth is 2 or 3 orders of magnitude lower, minimizing the formation of compounds with contaminants, which is critical in devices the performance of which is dictated by interfacial characteristics. In addition, the flux of incoming species can be measured in situ using ion probes so that the dose can be controlled accurately. The apparatus used in the present ion-beam technique includes a vacuum chamber containing a commercial collimated- ion-beam source, a supply of nitrogen and argon, and an ion probe for measuring the ion dose. Either argon or nitrogen can be used as the feed gases for the ion source, depending on whether cleaning of the substrate or growth of the nitride, respectively, is desired. Once the Nb base electrode and Al proximity layer have been deposited, the N2 gas line to the ion beam is vented and purged, and the ion-source is turned on until a stable discharge is obtained. The substrate is moved over the ion-beam source to expose the Al surface layer to the ion beam (see figure) for a specified duration for the formation of the nitride tunnel barrier. Next, the Nb counter-electrode layer is deposited on the nitride surface layer. The Nb/Al- AlN(x)/Nb-trilayer-covered substrate is then patterned into individual devices by use of conventional integrated-circuit processing techniques.

Kaul, Anupama↗
NASA NTRS2010

Fabrication of Single, Vertically Aligned Carbon Nanotubes in 3D Nanoscale Architectures

Plasma-enhanced chemical vapor deposition (PECVD) and high-throughput manufacturing techniques for integrating single, aligned carbon nanotubes (CNTs) into novel 3D nanoscale architectures have been developed. First, the PECVD growth technique ensures excellent alignment of the tubes, since the tubes align in the direction of the electric field in the plasma as they are growing. Second, the tubes generated with this technique are all metallic, so their chirality is predetermined, which is important for electronic applications. Third, a wafer-scale manufacturing process was developed that is high-throughput and low-cost, and yet enables the integration of just single, aligned tubes with nanoscale 3D architectures with unprecedented placement accuracy and does not rely on e-beam lithography. Such techniques should lend themselves to the integration of PECVD grown tubes for applications ranging from interconnects, nanoelectromechanical systems (NEMS), sensors, bioprobes, or other 3D electronic devices. Chemically amplified polyhydroxystyrene-resin-based deep UV resists were used in conjunction with excimer laser-based (lambda = 248 nm) step-and-repeat lithography to form Ni catalyst dots = 300 nm in diameter that nucleated single, vertically aligned tubes with high yield using dc PECVD growth. This is the first time such chemically amplified resists have been used, resulting in the nucleation of single, vertically aligned tubes. In addition, novel 3D nanoscale architectures have been created using topdown techniques that integrate single, vertically aligned tubes. These were enabled by implementing techniques that use deep-UV chemically amplified resists for small-feature-size resolution; optical lithography units that allow unprecedented control over layer-to-layer registration; and ICP (inductively coupled plasma) etching techniques that result in near-vertical, high-aspect-ratio, 3D nanoscale architectures, in conjunction with the use of materials that are structurally and chemically compatible with the high-temperature synthesis of the PECVD-grown tubes. The techniques offer a wafer-scale process solution for integrating single PECVD-grown nanotubes into novel architectures that should accelerate their integration in 3D electronics in general. NASA can directly benefit from this technology for its extreme-environment planetary missions. Current Si transistors are inherently more susceptible to high radiation, and do not tolerate extremes in temperature. These novel 3D nanoscale architectures can form the basis for NEMS switches that are inherently less susceptible to radiation or to thermal extremes.

Kaul, Anupama B.↗
NASA NTRS1989

Rocket measurements within a polar cap arc - Plasma, particle, and electric circuit parameters

Results are presented from the Polar Ionospheric Irregularities Experiment (PIIE), conducted from Sondrestrom, Greenland, on March 15, 1985, designed for an investigation of processes which lead to the generation of small-scale (less than 1 km) ionospheric irregularities within polar-cap F-layer auroras. An instrumented rocket was launched into a polar cap F layer aurora to measure energetic electron flux, plasma, and electric circuit parameters of a sun-aligned arc, coordinated with simultaneous measurements from the Sondrestrom incoherent scatter radar and the AFGL Airborne Ionospheric Observatory. Results indicated the existence of two different generation mechanisms on the dawnside and duskside of the arc. On the duskside, parameters are suggestive of an interchange process, while on the dawnside, fluctuation parameters are consistent with a velocity shear instability.

Weber, E. J.↗
NASA NTRS1987

Effect of double layers on magnetosphere-ionosphere coupling

The Earth's auroral zone contains dynamic processes occurring on scales from the length of an auroral zone field line which characterizes Alfven wave propagation to the scale of microscopic processes which occur over a few Debye lengths. These processes interact in a time-dependent fashion since the current carried by the Alfven waves can excite microscopic turbulence which can in turn provide dissipation of the Alfven wave energy. This review will first describe the dynamic aspects of auroral current structures with emphasis on consequences for models of microscopic turbulence. A number of models of microscopic turbulence will be introduced into a large-scale model of Alfven wave propagation to determine the effect of various models on the overall structure of auroral currents. In particular, the effects of a double layer electric field which scales with the plasma temperature and Debye length is compared with the effect of anomalous resistivity due to electrostatic ion cyclotron turbulence in which the electric field scales with the magnetic field strength. It is found that the double layer model is less diffusive than in the resistive model leading to the possibility of narrow, intense current structures.

Lysak, Robert L.↗