Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA RADIAL PROFILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Electrostatic beams from tailored plasmas in a Penning-Malmberg trap

In recent work, a technique was developed to extract high quality beams from single-component plasmas confined in a Penning-Malmberg trap in a 4.8 T magnetic field. In this paper, a procedure is developed to extract these beams from the confining magnetic field and then focus them to create especially tailored electrostatic beams. Electron beams are extracted from the field in two stages: they are first transported to a region of reduced field (1 mT), and then taken to zero field with a nonadiabatic, fast extraction. Once in the field-free region, the beams are focused using an Einzel lens. Experimental results and numerical simulations are presented to illustrate the extraction and focusing process. Theoretical expressions are developed to describe the modifications to the relevant beam energy and spatial distributions. Where possible, analytic expressions are presented for the case relevant here of beams with Gaussian radial profiles. Beam emittance considerations are discussed as well as prospects for further development of these techniques. Application of these techniques to provide high-quality positron beams is also discussed.

43 PARTICLE ACCELERATORS↗

Fast electron flux driven by lower hybrid wave in the scrape-off layer

The fast electron flux driven by Lower Hybrid Wave (LHW) in the scrape-off layer (SOL) in EAST is analyzed both theoretically and experimentally. The five bright belts flowing along the magnetic field lines in the SOL and hot spots at LHW guard limiters observed by charge coupled device and infrared cameras are attributed to the fast electron flux, which is directly measured by retarding field analyzers (RFA). The current carried by the fast electron flux, ranging from 400 to 6000 A/m{sup 2} and in the direction opposite to the plasma current, is scanned along the radial direction from the limiter surface to the position about 25 mm beyond the limiter. The measured fast electron flux is attributed to the high parallel wave refractive index n{sub ||} components of LHW. According to the antenna structure and the LHW power absorbed by plasma, a broad parallel electric field spectrum of incident wave from the antennas is estimated. The radial distribution of LHW-driven current density is analyzed in SOL based on Landau damping of the LHW. The analytical results support the RFA measurements, showing a certain level of consistency. In addition, the deposition profile of the LHW power density in SOL is also calculated utilizing this simple model. This study provides some fundamental insight into the heating and current drive effects induced by LHW in SOL, and should also help to interpret the observations and related numerical analyses of the behaviors of bright belts and hot spots induced by LHW.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of Alfvén-slow frequency gaps and discovery of Alfvén-slow eigenmodes in tokamaks

An analytical theory based on the MHD model is presented for understanding the coupling between the shear Alfvén wave and the slow magnetosonic wave (or the so called slow mode) in the frequency range below the Toroidal Alfvén Eigenmode (TAE) continuum spectrum gap. In tokamak plasmas, coupling of the Alfvén m poloidal harmonic and the slow mode m ± 1 harmonics causes the Alfvén m harmonic continuous spectrum to be uplifted from the uncoupled Alfvén spectrum by an amount related to the plasma pressure and the geodesic magnetic field curvature. However, the frequency of one of the slow mode m ± 1 harmonics is reduced by the same pressure-curvature coupling effect. But the frequency of the other slow mode harmonic is relatively unaffected. As a result, the Alfvén-slow (AS) mode continuous spectrum is broken up into two Alfvén-Slow (AS) gaps below the TAE continuum gap. Coupling of the Alfvén m harmonic with the slow mode m ± 2 harmonics also creates additional AS gaps if their frequencies cross each other. The AS gap widths increase with the plasma pressure. The creation of AS gaps allows the existence of several new types of Alfvén-Slow Eigenmodes (ASEs). The radial structure of these new ASEs does not intersect with the continuous spectrum and thus does not suffer from continuum damping. The Beta-induced Alfvén-Acoustic Eigenmode (BAAE) is one type of ASEs with frequency in the lowest AS frequency gap. However, the BAAE usually interacts with the Alfvén-Slow continuum and suffers from continuum damping. The existence of ASEs is ubiquitous for normal and reserve safety factor profiles, broad range of plasma β values, different plasma shapes, and many different toroidal mode numbers. The newly discovered ASEs provide explanation for the experimentally observed Beta-induced Alfvén Eigenmodes destabilized by fast ions with frequencies below the TAE frequency gap.

Cheng, C. Z. (ORCID:0000000166187806)↗

Z{sub eff} measurement using extreme ultraviolet bremsstrahlung emission in LHD

Radial profile measurement of Z{sub eff} using visible bremsstrahlung (5300 A) in the Large Helical Device (LHD) has often encountered difficulties because the intensity profile was largely deformed by the nonuniform visible bremsstrahlung emissions from the edge ergodic layer surrounding the core plasma. A space-resolved flat-field extreme ultraviolet (EUV) spectrometer has been newly adopted to measure the Z{sub eff} profile using the EUV bremsstrahlung continuum in the wavelength range of 70-75 A. The EUV bremsstrahlung intensity profiles have been measured and checked for all the magnetic configurations with totally different magnetic field structures in the ergodic layer of LHD. It is found that the nonuniform bremsstrahlung emission from the thick ergodic layer can be entirely eliminated by use of the EUV emission with relatively high photon energy of 170 eV. As a result, the Z{sub eff} profile can be successfully measured for most of discharges regardless of magnetic field structures of the ergodic layer. The Z{sub eff} profiles measured in the EUV range are compared with those measured in the visible range at a magnetic configuration with the thinnest ergodic layer thickness. The result verifies that the use of the EUV bremsstrahlung continuum is an alternative way for the Z{sub eff} measurement in toroidal plasmas with nonuniform bremsstrahlung emissions at the edge. Typical results from the EUV bremsstrahlung measurement are presented showing a fairly flat Z{sub eff} profile with error bars of {+-}14%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design and implementation of a full profile sub-cm ruby laser based Thomson scattering system for MAST

A major upgrade to the ruby Thomson scattering (TS) system has been designed and implemented on the Mega-ampere spherical tokamak (MAST). MAST is equipped with two TS systems, a Nd:YAG laser system and a ruby laser system. Apart from common collection optics each system provides independent measurements of the electron temperature and density profile. This paper focuses on the recent upgrades to the ruby TS system. The upgraded ruby TS system measures 512 points across the major radius of the MAST vessel. The ruby laser can deliver one 10 J 40 ns pulse at 1 Hz or two 5 J pulses separated by 100-800 {mu}s. The Thomson scattered light is collected at F/15 over 1.4 m. This system can resolve small (7 mm) structures at 200 points in both the electron temperature and density channels at high optical contrast; {approx}50% modulated transfer function. The system is fully automated for each MAST discharge and requires little adjustment. The estimated measurement error for a 7 mm radial point is <4% of T{sub e} and <3% of n{sub e} in the range of 40 eV to 2 keV, for a density of n{sub e}=2x10{sup 19} m{sup -3}. The photon statistics at lower density can be increased by binning in the radial direction as desired. A new intensified CCD camera design allows the ruby TS system to take two snapshots separated with a minimum time of 230 {mu}s. This is exploited to measure two density and temperature profiles or to measure the plasma background light.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Conceptual design of a neutron camera for MAST Upgrade

This paper presents two different conceptual designs of neutron cameras for Mega Ampere Spherical Tokamak (MAST) Upgrade. The first one consists of two horizontal cameras, one equatorial and one vertically down-shifted by 65 cm. The second design, viewing the plasma in a poloidal section, also consists of two cameras, one radial and the other one with a diagonal view. Design parameters for the different cameras were selected on the basis of neutron transport calculations and on a set of target measurement requirements taking into account the predicted neutron emissivities in the different MAST Upgrade operating scenarios. Based on a comparison of the cameras’ profile resolving power, the horizontal cameras are suggested as the best option.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Compressed ion temperature gradient turbulence in diverted tokamak edge

It is found from a heat-flux-driven full-f gyrokinetic particle simulation that there is ion temperature gradient (ITG) turbulence across an entire L-mode-like edge density pedestal in a diverted tokamak plasma in which the ion temperature gradient is mild without a pedestal structure, hence the normalized ion temperature gradient parameter {eta}{sub i}=(d log T{sub i}/dr)/(d log n/dr) varies strongly from high (>4 at density pedestal top/shoulder) to low (<2 in the density slope) values. Variation of density and {eta}{sub i} is in the same scale as the turbulence correlation length, compressing the turbulence in the density slope region. The resulting ion thermal flux is on the order of experimentally inferred values. The present study strongly suggests that a localized estimate of the ITG-driven {chi}{sub i} will not be valid due to the nonlocal dynamics of the compressed turbulence in an L-mode-type density slope. While the thermal transport and the temperature profile saturate quickly, the ExB rotation shows a longer time damping during the turbulence. In addition, a radially in-out mean potential variation is observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Outflow structure of the quiet sun corona probed by spacecraft radio scintillations in strong scattering

Radio scintillation observations have been unable to probe flow speeds in the low corona where the scattering of radio waves is exceedingly strong. Here we estimate outflow speeds continuously from the vicinity of the Sun to the outer corona (heliocentric distances of 1.5-20.5 solar radii) by applying the strong scattering theory to radio scintillations for the first time, using the Akatsuki spacecraft as the radio source. Small, nonzero outflow speeds were observed over a wide latitudinal range in the quiet-Sun low corona, suggesting that the supply of plasma from closed loops to the solar wind occurs over an extended area. The existence of power-law density fluctuations down to the scale of 100 m was suggested, which is indicative of well-developed turbulence which can play a key role in heating the corona. At higher altitudes, a rapid acceleration typical of radial open fields is observed, and the temperatures derived from the speed profile show a distinct maximum in the outer corona. This study opened up a possibility of observing detailed flow structures near the Sun from a vast amount of existing interplanetary scintillation data.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect Of Changing Laser Irradiance On The Laser Induced Plasma Parameters For Au/Cu Layered Target

Pulsed laser induced plasma (LIP) has a very short temporal existence. Due to the transient nature of the produced LIP, with a fast evolution of its characteristic parameters, these parameters are heavily dependent on the irradiation conditions such as incident laser intensity, irradiation spot size, ambient gas composition and pressure. It is also true that these parameters vary drastically with axial or radial distance from the target surface under the same irradiation. In the present work depth profiling measurements of gold film onto copper substrate have been performed and the effect of changing laser irradiance by changing the working distance on both electron density and electron temperature has been also studied.

36 MATERIALS SCIENCE↗

Demonstration of reconstruction-free static magnetic control of DIII-D plasma with deep reinforcement learning

This paper presents the development and experimental validation of a reinforcement learning (RL)-based magnetic controller on the DIII-D tokamak. The controller directly maps raw magnetic diagnostic signals to actuator commands, replacing the traditional isoflux control algorithm based on equilibrium reconstruction. Four RL controllers are trained using the Soft Actor–Critic algorithm with an asymmetric Actor–Critic architecture in the NSFsim simulator. All controllers are deployed in the DIII-D Plasma Control System and operated with a 4 kHz feedback loop. Two randomization strategies are evaluated during training: evolving kinetic profiles and fixed kinetic profiles within each episode. The latter approach is found to better capture experimental deviations in the current density profile and to provide overall improved control performance. Robust operation is demonstrated across heating power scans in both L- and H-mode plasmas, as well as during transient events such as L–H transitions and pellet injections. Control errors in plasma shape and radial position remained within 1.5–2.0 cm and 1 cm, respectively. A notable discrepancy was observed in the vertical X-point position, with errors of up to approximately 4 cm, attributed to the current density distribution mismatches between simulations and experiments.

DIII-D↗

Measurements and modeling of type-I and type-II ELMs heat flux to the DIII-D divertor

Type-I and type-II edge-localized-modes (ELMs) heat flux profiles measured at the DIII-D divertor feature a peak in the vicinity of the strike-point and a plateau in the scrape-off-layer (SOL), which extends to the first wall. The plateau is present in attached and detached divertors and it is found to originate with plasma bursts upstream in the SOL. The integrated ELM heat flux is distributed at ~65% in the peak and ~35% in this plateau. The parallel loss model, currently used at ITER to predict power loads to the walls, is benchmarked using these results in the primary and secondary divertors with unprecedented constraints using experimental input data for ELM size, radial velocity, energy, electron temperature and density, heat flux footprints and number of filaments. The model can reproduce the experimental near-SOL peak within ~20%, but cannot match the SOL plateau. Employing a two-component approach for the ELM radial velocity, as guided by intermittent data, the full radial heat flux profile can be well matched. The ELM-averaged radial velocity at the separatrix, which explains profile widening, increases from ~0.2 km s –1 in attached to ~0.8 km s –1 in detached scenarios, as the ELM filaments' path becomes electrically disconnected from the sheath at the target. The results presented here indicate filaments fragmentation as a possible mechanism for ELM transport to the far-SOL and provide evidence on the beneficial role of detachment to mitigate ELM flux in the divertor far-SOL. However, these findings imply that wall regions far from the strike points in future machines should be designed to withstand significant heat flux, even for small-ELM regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental observation of the geodesic acoustic frequency limit for the NBI-driven Alfvén eigenmodes in TJ-II

We study Alfvén Eigenmodes (AEs) in the TJ-II heliac in hydrogen plasmas heated by hydrogen cofield NBI. Taking advantage of the unique TJ-II flexibility in varying plasma current, we have observed strong variation of the AE frequency from f AE ~ 30 to ~ 220 kHz for selected modes. An advanced heavy ion beam probe diagnostic determines the spatial location and internal amplitudes of the modes. The modes satisfy a local AE dispersion relation including the geodesic acoustic frequency that represents the lowest frequency of the mode. Linear MHD-modeling with STELLGAP and FAR3D codes shows that the calculated temporal evolution of the mode frequency reproduces the observed maxima and minima at the same time intervals with a similar frequency range and the radial profile peaks near the outer edge of the observed one.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time-dependent modeling of gamma-ray flares in blazar PKS1510–089

Here we present a new approach for constraining luminous blazars, incorporating fully time-dependent and self-consistent modeling of bright γ-ray flares of PKS 1510–089, resolved with Fermi-LAT, in the framework of the internal shock scenario. The results of our modeling imply the location of the γ-ray flaring zone to be outside of the broad-line region, namely around ≃0.3 pc from the core for a free-expanding jet with the opening angle Γ θ{sub jet}≃1 (where Γ is the jet bulk Lorentz factor), up to ≃3 pc for a collimated outflow with Γ θ{sub jet}≃0.1. Moreover, under the Γ θ{sub jet}≃1 condition, our modeling indicates the maximum efficiency of the jet production during the flares, with the total jet energy flux strongly dominated by protons and exceeding the available accretion power in the source. This is in contrast to the quiescence states of the blazar, characterized by lower jet kinetic power and an approximate energy equipartition between different plasma constituents. We demostrate how strictly simultaneous observations of flaring PKS 1510–089 at optical, X-ray, and GeV photon energies, on hourly timescales, augmented by extensive simulations as presented in this paper, may help to impose further precise constraints on the magnetization and opening angle of the emitting region. In addition, our detailed modeling implies that a non-uniformity of the Doppler factor across the jet, caused by the radial expansion of the outflow, may lead to a pronounced time distortion in the observed γ-ray light curves, resulting, in particular, in asymmetric flux profiles with substantially extended decay phases.

79 ASTRONOMY AND ASTROPHYSICS↗

SciDAC - Center for Plasma Edge Simulation - Project Summary

Final Technical Report: Center for Plasma Edge Simulation (CPES) Principal Investigator: Scott Parker, University of Colorado, Boulder Description/Abstract First-principle simulations of edge pedestal micro-turbulence are performed with the global gyrokinetic turbulence code GEM for both low and high confinement tokamak plasmas. The high confinement plasmas show a larger growth rate, but nonlinearly a lower particle and heat flux. Numerical profiles are obtained from the XGC0 neoclassical code. XGC0/GEM code coupling is implemented under the EFFIS (“End-to-end Framework for Fusion Integrated Simulation”) framework. Investigations are underway to clearly identify the micro-instabilities in the edge pedestal using global and flux-tube gyrokinetic simulation with realistic experimental high confinement profiles. We use both experimental profiles and those obtained using the EFFIS XGC0/GEM coupled code framework. We find there are three types of instabilities at the edge: a low-n, high frequency electron mode, a high-n, low frequency ion mode, and possibly an ion mode like kinetic ballooning mode (KBM). Investigations are under way for the effects of the radial electric field. Finally, we have been investigating how plasmas dominated by ion-temperature gradient (ITG) driven turbulence, how cold Deuterium and Tritium ions near the edge will naturally pinch radially inward towards the core. We call this mechanism “natural fueling.” It is due to the quasi-neutral heat flux dominated nature of the turbulence and still applies when trapped and passing kinetic electron effects are included. To understand this mechanism, examine the situation where the electrons are adiabatic, and there is an ion heat flux. In such a case, lower energy particles move inward and higher energy particles move outward. If a trace amount of cold particles are added, they will move inward.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transport of tungsten to collector probes in DIII-D

Collector probes have long been used to measure impurity fluxes in the scrape off layer (SOL) of tokamaks. In this study, collector probes were inserted in the main SOL of DIII-D during the tungsten Metal Rings Campaign, and the W deposits on the probes were analyzed ex situ using Rutherford backscattering spectrometry analysis to obtain radial profiles of W deposition. A simple picture is hypothesized for how the W transports through the SOL from the target to the two sides of the probe, based on a long-theorized impurity accumulation at the crown (i.e. the top) of the plasma. The patterns observed in the deposition profiles along the probes support the hypothesized picture; however, 3D modeling and further experimental studies are needed to support more definitive conclusions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Q2 Report for FY25 Theory and Simulation Performance Target: Development of an integrated modeling framework for fusion reactor design and assessment

This report describes the work and activities carried out towards the completion of each of the following milestones in FY25 Q2: 1. Demonstrate workflow for generating self-consistent CESOL plasma profiles + first wall and divertor loading prediction and generate the CAT plasma and neutron loading needed for further engineering analysis: $\circ$ Run CESOL with BOUT++/Hermes-3 and immersed boundary condition to directly map to wall: • Run BOUT++/Hermes-3 through the IPS workflow to find radial particle and energy diffusivities to match either the Eich or the physics-based scaling of the SOL heat flux width, and • Expand source of first wall heat flux to include charged particles, neutrals, and radiation from the core+edge. 2. Generate medium fidelity parametrized CAD: $\circ$ Develop the TRACER tool to read an existing CAD, regenerate the geometry based on vertex location and connectivity information, define vertex translation and parameters needed for scaling the CAD, and $\circ$ Utilize the FreeGS code to determine CAT PF coil placement, including minimizing the number of coils, coil current, and electromechanical stresses. 3. Utilize plasma loading for engineering analysis: $\circ$ Couple the plasma loading to input for OpenFOAM and demonstrate initial test of thermal analysis of CAT first wall loading with typical DCLL blanket component cooling boundary conditions. 4. Demonstrate nuclear analysis: $\circ$ Apply initial analysis of tritium transport in DCLL blanket by evaluating spatially resolved tritium generation rates, tritium diffusion and convection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-RAY EMISSION LINE PROFILES FROM WIND CLUMP BOW SHOCKS IN MASSIVE STARS

The consequences of structured flows continue to be a pressing topic in relating spectral data to physical processes occurring in massive star winds. In a preceding paper, our group reported on hydrodynamic simulations of hypersonic flow past a rigid spherical clump to explore the structure of bow shocks that can form around wind clumps. Here we report on profiles of emission lines that arise from such bow shock morphologies. To compute emission line profiles, we adopt a two-component flow structure of wind and clumps using two 'beta' velocity laws. While individual bow shocks tend to generate double-horned emission line profiles, a group of bow shocks can lead to line profiles with a range of shapes with blueshifted peak emission that depends on the degree of X-ray photoabsorption by the interclump wind medium, the number of clump structures in the flow, and the radial distribution of the clumps. Using the two beta law prescription, the theoretical emission measure and temperature distribution throughout the wind can be derived. The emission measure tends to be power law, and the temperature distribution is broad in terms of wind velocity. Although restricted to the case of adiabatic cooling, our models highlight the influence of bow shock effects for hot plasma temperature and emission measure distributions in stellar winds and their impact on X-ray line profile shapes. Previous models have focused on geometrical considerations of the clumps and their distribution in the wind. Our results represent the first time that the temperature distribution of wind clump structures are explicitly and self-consistently accounted for in modeling X-ray line profile shapes for massive stars.

79 ASTRONOMY AND ASTROPHYSICS↗