Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRANDTL NUMBER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Plane elasto-plastic analysis of v-notched plate under bending by boundary integral equation method

A method of solution is presented, which, when applied to the elasto-plastic analysis of plates having a v-notch on one edge and subjected to pure bending, will produce stress and strain fields in much greater detail than presently available. Application of the boundary integral equation method results in two coupled Fredholm-type integral equations, subject to prescribed boundary conditions. These equations are replaced by a system of simultaneous algebraic equations and solved by a successive approximation method employing Prandtl-Reuss incremental plasticity relations. The method is first applied to number of elasto-static problems and the results compared with available solutions. Good agreement is obtained in all cases. The elasto-plastic analysis provides detailed stress and strain distributions for several cases of plates with various notch angles and notch depths. A strain hardening material is assumed and both plane strain and plane stress conditions are considered.

Rzasnicki, W.↗
NASA NTRS1976

Subsonic loads on wings having sharp leading edges and tips

A vortex-lattice method for predicting the aerodynamics of wings having separation at the sharp edges in incompressible flows is extended to compressible subsonic flows using a modified Prandtl-Glauert transformation. Numerical results showing the effect of freestream Mach number on the aerodynamic coefficients are compared with available experimental data for several planforms. It is shown that the proposed method is suitable for predicting the aerodynamic loads on low-aspect wings at moderate angles of attack for high subsonic freestream Mach number. The method is limited to angles of attack up to 12 deg for high subsonic freestream Mach number and to angles of attack up to 20 deg for Mach number not exceeding 0.5.

Kandil, O. A.↗
NASA NTRS1948

On similarity rules for transonic flows

A method used by Tsien to derive similarity rules for hypersonic flows is utilized to derive Von Karman's similarity rules for transonic flows. At the lower limit of the transonic region of flow the theory yields a formula for the critical stream Mach numbers of a given family of symmetrical profiles. It is further shown that this formula can also be obtained by means of the Prandtl-Glauert small-perturbation method. Investigation of the behavior of the similarity parameter in the region where the thickness coefficient approaches zero and the critical stream Mach number approaches unity shows that it possesses a limiting value characteristic of the prescribed family of shapes.

Kaplan, Carl↗
NASA NTRS1985

Contribution to the theory of stationary separation areas

An attempt is made to determine the region of existence of possible steady flows with a closed separation area in a range of Reynolds numbers such that flow in the viscous mixing area can be described by the Prandtl's equations. The boundary conditions for the flow in the separation region are selected so as to simplify the flow pattern in this region, making it possible to use the methods of hydrodynamic analysis. A rule for determining stable steady flows with separation areas is formulated which is well suited for analyzing laminar flows and can be applied to turbulent flows in some areas.

Taganov, G. I.↗
NASA NTRS1983

Transonic small disturbance calculations including entropy corrections

Murman's fully conservative mixed type finite-difference operators are first modified. A special sonic point operator with an iterative damping term is introduced which helps the convergence and does not affect the spatial conservative differences. Reliable calculations with second order supersonic schemes are obtained using two sonic operators, the regular sonic point operator followed by a first order supersonic scheme. Also, shock point operator is shown to be equivalent to fitting a locally normal shock terminating the supersonic region. The potential calculations are then modified to account for the non-isentropic jump conditions using a simple shock fitting procedure based on Prandtl relation. The entropy increase across the shock is calculated in terms of the Mach number upstream of the shock and the effect of the generated vorticity is estimated via Crocco relation. Different examples are calculated and extensions to the full potential equation are discussed.

Hafez, M.↗
NASA NTRS1996

Turbulent Inflow Measurements

In the present research, tilt rotor aeroacoustics have been studied experimentally and computationally. Experimental measurements were made on a 1/12.5 scale model. A dimensional analysis showed that the model was a good aeroacoustic approximation to the full-scale aircraft, and scale factors were derived to extrapolate the model measurements to the full-scale XV-15. The experimental measurements included helium bubble flow visualization, silk tuft flow visualization, 2-component hot wire anemometry, 7-hole pressure probe measurements, vorticity measurements, and outdoor far field acoustic measurements. The hot wire measurements were used to estimate the turbulence statistics of the flow field into the rotors, such as length scales, velocity scales, dissipation, and turbulence intermittency. To date, these flow measurements are the only ones in existence for a hovering tilt rotor. Several different configurations of the model were tested: (1) standard configurations (single isolated rotor, two rotors without the aircraft, standard tilt rotor configuration); (2) flow control devices (the 'plate', the 'diagonal fences'); (3) basic configuration changes (increasing the rotor/rotor spacing, reducing the rotor plane/wing clearance, operating the rotors out of phase). Also, an approximation to Sikorsky's Variable Diameter Tilt Rotor (VDTR) configuration was tested, and some flow measurements were made on a semi-span configuration of the model. Acoustic predictions were made using LOWSON.M, a Mathematica code. This hover prediction code, from HOVER.FOR, used blade element theory for the aerodynamics, and Prandtl's Vortex theory to model the wake, along with empirical formulas for the effects of Reynolds number, Mach number, and stall. Aerodynamic models were developed from 7-hole pressure probe measurements of the mean velocity into the model rotors. LOWSON.M modeled a rotor blade as a single force and source/sink combination separated in the chordwise direction, at an effective blade radius. Spanwise, Mach-weighted integrals were used to find the equivalent forces and equivalent source strengths.

George, Albert R.↗
NASA NTRS1996

Tilt Rotor Aircraft Aeroacoustics

A fleet of civil tilt rotor transports offers a means of reducing airport congestion and point-to-point travel time. The speed, range, and fuel economy of these aircraft, along with their efficient use of vertiport area, make them good candidates for short-to-medium range civil transport. However, to be successfully integrated into the civilian community, the tilt rotor must be perceived as a quiet, safe, and economical mode of transportation that does not harm the environment. In particular, noise impact has been identified as a possible barrier to the civil tilt rotor. Along with rotor conversion-mode flight, and blade-vortex interaction noise during descent, hover mode is a noise problem for tilt rotor operations. In the present research, tilt rotor hover aeroacoustics have been studied analytically, experimentally, and computationally. Various papers on the subject were published as noted in the list of publications. More recently, experimental measurements were made on a 1/12.5 scale model of the XV-15 in hover and analyses of this data and extrapolations to full scale were also carried out. A dimensional analysis showed that the model was a good aeroacoustic approximation to the full-scale aircraft, and scale factors were derived to extrapolate the model measurements to the full-scale XV-15. The experimental measurements included helium bubble flow visualization, silk tuft flow visualization, 2-component hot wire anemometry, 7-hole pressure probe measurements, vorticity measurements, and outdoor far field acoustic measurements. The hot wire measurements were used to estimate the turbulence statistics of the flow field into the rotors, such as length scales, velocity scales, dissipation, and turbulence intermittency. Several different configurations of the model were tested: (1) standard configurations (single isolated rotor, two rotors without the aircraft, standard tilt rotor configuration); (2) flow control devices (the 'plate', the 'diagonal fences'); (3) basic configuration changes (increasing the rotor/rotor spacing, reducing the rotor plane/wing clearance. operating the rotors out of phase). Also, an approximation to Sikorsky's Variable Diameter Tilt Rotor (VDTR) configuration was tested, and some flow measurements were made on a semi-span configuration of the model. Acoustic predictions were made using LOWSON.M, a Mathematica code Mean aerodynamic models were developed based on hover performance predictions from HOVER.FOR. This hover prediction code used blade element theory for the aerodynamics, and Prandtl's Vortex theory to model the wake, along with empirical formulas for the effects of Reynolds number, Mach number, and stall. Aerodynamic models were developed from 7-hole pressure probe measurements of the mean velocity into the model rotors.

George, Albert R.↗
NASA NTRS1979

A modification to linearized theory for prediction of pressure loadings on lifting surfaces at high supersonic Mach numbers and large angles of attack

A new linearized-theory pressure-coefficient formulation was studied. The new formulation is intended to provide more accurate estimates of detailed pressure loadings for improved stability analysis and for analysis of critical structural design conditions. The approach is based on the use of oblique-shock and Prandtl-Meyer expansion relationships for accurate representation of the variation of pressures with surface slopes in two-dimensional flow and linearized-theory perturbation velocities for evaluation of local three-dimensional aerodynamic interference effects. The applicability and limitations of the modification to linearized theory are illustrated through comparisons with experimental pressure distributions for delta wings covering a Mach number range from 1.45 to 4.60 and angles of attack from 0 to 25 degrees.

Carlson, H. W.↗
NASA NTRS1987

An engineering study of hybrid adaptation of wind tunnel walls for three-dimensional testing

Solid wall tunnels having only upper and lower walls flexing are described. An algorithm for selecting the wall contours for both 2 and 3 dimensional wall flexure is presented and numerical experiments are used to validate its applicability to the general test case of 3 dimensional lifting aircraft models in rectangular cross section wind tunnels. The method requires an initial approximate representation of the model flow field at a given lift with wallls absent. The numerical methods utilized are derived by use of Green's source solutions obtained using the method of images; first order linearized flow theory is employed with Prandtl-Glauert compressibility transformations. Equations are derived for the flexed shape of a simple constant thickness plate wall under the influence of a finite number of jacks in an axial row along the plate centerline. The Green's source methods are developed to provide estimations of residual flow distortion (interferences) with measured wall pressures and wall flow inclinations as inputs.

Brown, Clinton↗
NASA NTRS1989

Comparison of LDV measurements and Navier-Stokes solutions in a two-dimensional 180-degree turn-around duct

Results from an experimental and numerical investigation of turbulent subsonic flow inside a two-dimensional, strongly curved, 180 deg turn-around duct are presented. Data measured with a two-component, two-color laser Doppler velocimeter include profiles of mean axial velocity and local flow angle. Static pressure distributions are also measured. Results are obtained at a Mach number of 0.1, and at Reynolds numbers of 100,000 and a million based on channel height. Numerical calculations are performed using the incompressible Navier-Stokes equations with a Prandtl mixing length zero-equation turbulence model modified for internal flows. Theory and experiment are compared to evaluate the ability of the turbulence model to predict this class of internal flows with strong curvature.

Monson, Daryl J.↗
NASA NTRS1944

Compressible potential flow with circulation about a circular cylinder

The potential function for flow, with circulation, of a compressible fluid about a circular cylinder is obtained in series form including terms of the orders of m(4) where m is the Mach number of the free stream. The resulting equations are used to obtain pressure coefficients as a function of Mach number at a point on the surface of the cylinder for different values of circulation. The coefficients derived are compared with the Glauert-Prandtl and Karman-Tsien approximations which are functions of the pressure coefficients of an incompressible fluid. For the cases considered, the values of the pressure coefficients computed from the theory were found to be somewhere between the two approximations, the first underestimating and the second overestimating it.

Heaslet, Max A↗
NASA NTRS1943

Study of the Two-Dimensional Flow Through a Converging-Diverging Nozzle

A study of a flow through a straight converging-diverging nozzle of simple design has been made preliminary to studies of other supersonic flows. The diverging part of the nozzle was designed by the Prandtl-Busemann method to give a uniform pressure at its exit of 0.298 times the initial total head, that is, to give a Mach number of 1.436. Schlieren photographs of the flow and pressure-distribution measurements along the diverging part of the nozzle were made. A comparison of the theory with these measurements is presented.

Kantrowitz, Arthur↗
NASA NTRS1998

Numerical Study of Interaction of a Vortical Density Inhomogeneity with Shock and Expansion Waves

We studied the interaction of a vortical density inhomogeneity (VDI) with shock and expansion waves. We call the VDI the region of concentrated vorticity (vortex) with a density different from that of ambiance. Non-parallel directions of the density gradient normal to the VDI surface and the pressure gradient across a shock wave results in an additional vorticity. The roll-up of the initial round VDI towards a non-symmetrical shape is studied numerically. Numerical modeling of this interaction is performed by a 2-D Euler code. The use of an adaptive unstructured numerical grid makes it possible to obtain high accuracy and capture regions of induced vorticity with a moderate overall number of mesh points. For the validation of the code, the computational results are compared with available experimental results and good agreement is obtained. The interaction of the VDI with a propagating shock wave is studied for a range of initial and induced circulations and obtained flow patterns are presented. The splitting of the VDI develops into the formation of a non-symmetrical vortex pair and not in a set of vortices. A method for the analytical computation of an overall induced circulation Gamma(sub 1) as a result of the interaction of a moving VDI with a number of waves is proposed. Simplified, approximated, expressions for Gamma(sub 1) are derived and their accuracy is discussed. The splitting of the VDI passing through the Prandtl-Meyer expansion wave is studied numerically. The obtained VDI patterns are compared to those for the interaction of the VDI with a propagating shock wave for the same values of initial and induced circulations. These patterns have similar shapes for corresponding time moments.

Povitsky, A.↗
NASA NTRS1993

Particle-Gas Dynamics in the Midplane of a Protoplanetary Nebula

In this paper, we study the stage of planetary formation during which the particulate material is still dispersed as centimeter-to-meter sized primordial aggregates. During this stage, particles are able to settle toward the midplane into a layer of mass density comparable to or much greater than that of the gas. Nonlinear, coupled interactions between the particles and the nebula gas become significant and ultimately determine the vertical profiles of the particle density and the mean velocities of the particles and the nearby gas. This is the environment in which the earliest planetesimals probably form. Our numerical models rely on the Reynolds averaged Navier-Stokes equations for the gas and particles and are fully viscous and turbulent (and, for the particles. compressible). Our turbulence modeling uses a Prandtl local shear parametrization, validated by laboratory experiments. We have developed a new model for particle diffusion involving the profile of the nebula gas turbulence and the particle Schmidt number, which is a function of particle size and density. We model a cool, quiescent nebula at 1 AU (280 K) and 10 AU (90 K) and a higher temperature stage (1000 K) at 1 AU. Our main results include: (a) rapid accretion of planetesimals by gravitationally unstable fragmentation on an orbital time scale (the 'Goldreich-Ward instability') is unlikely to occur until objects have already accreted by some other process to the mass of the largest known meteorite samples, if at all; (b) from 'seeds' as small as 10 m, growth of 10- to 100-km planetesimals can proceed rapidly by drift-augmented accretion in the particle-rich midplane with orbital decay of about 1% for the growing planetesimals; (c) outward transport of vapor and small entrained chips can account for significant radial compositional and mineralogical mixing in primitive meteorite parent bodies. Other implications may be drawn concerning particle random collisional velocities and the time scales of midplane turbulence.

Cuzzi, Jeffrey N.↗
NASA NTRS1972

Hot-gas-side heat transfer with and without film cooling on a simulated nuclear rocket thrust chamber using H2-O2

Heat-transfer coefficients were obtained on a thrust chamber which simulated the geometry of the NERVA nuclear rocket. The tests were performed with and without peripheral film cooling over a chamber pressure range of 1.05 million to 5.84 million newtons per square meter (153 to 847 psia). With no film cooling, the overall axial variation in the value of the correlation coefficient C of the equation (Stanton)* (Prandtl)* to the 0.7ths power = C(Reynolds)* to the -0.2ths power, where * indicates the reference enthalpy condition, was reduced 66 percent when the local diameter in the Reynolds number was replaced by the axial distance from the injector face. The average peak values of C were reduced 25 percent with 2 and 3.75 percent cooling and 50 percent with 7.5 percent cooling.

Quentmeyer, R. J.↗
NASA NTRS1986

Boundary-layer computational model for predicting the flow and heat transfer in sudden expansions

Fully developed turbulent and laminar flows through symmetric planar and axisymmetric expansions with heat transfer were modeled using a finite-difference discretization of the boundary-layer equations. By using the boundary-layer equations to model separated flow in place of the Navier-Stokes equations, computational effort was reduced permitting turbulence modelling studies to be economically carried out. For laminar flow, the reattachment length was well predicted for Reynolds numbers as low as 20 and the details of the trapped eddy were well predicted for Reynolds numbers above 200. For turbulent flows, the Boussinesq assumption was used to express the Reynolds stresses in terms of a turbulent viscosity. Near-wall algebraic turbulence models based on Prandtl's-mixing-length model and the maximum Reynolds shear stress were compared.

Lewis, J. P.↗
NASA NTRS1953

Equations, tables, and charts for compressible flow

This report, which is a revision and extension of NACA-TN-1428, presents a compilation of equations, tables, and charts useful in the analysis of high-speed flow of a compressible fluid. The equations provide relations for continuous one-dimensional flow, normal and oblique shock waves, and Prandtl-Meyer expansions for both perfect and imperfect gases. The tables present useful dimensionless ratios for continuous one-dimensional flow and for normal shock waves as functions of Mach number for air considered as a perfect gas. One series of charts presents the characteristics of the flow of air (considered a perfect gas) for oblique shock waves and for cones in a supersonic air stream. A second series shows the effects of caloric imperfections on continuous one-dimensional flow and on the flow through normal and oblique shock waves. (author)

Source record↗