Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRIMARY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Stereo 3-D and non-stereo presentations of a computer-generated pictorial primary flight display with pathway augmentation

Stereo 3-D was researched as a means to present cockpit displays which enhance a pilot's situational awareness while maintaining a desirable level of mental workload. The initial study at the NASA Langley Research Center used two different pathways-in-the-sky to augment a computer-generated pictorial primary flight display. One pathway resembled the outline of signposts, while the other pathway resembled a monorail. That display was configured for a curved approach to a landing such as could be used in a Microwave Landing System (MLS) approach. It could also be used for military transports which would have to fly a precision curved pathway. Each trial was initialized with the pilot on the desired flight path. After 2 seconds, he suddenly was shifted to one of eight flight path offsets. The pilot was then required to make the initial pitch and/or roll input to correct back to the nominal flight path. As soon as the input was made, the trial was over. No input was required for control trials with no flight path offset. Pilots responded statistically significantly faster when the display was presented in the stereo version than when it was presented in the nonstereo version.

Nataupsky, Mark↗
NASA NTRS1989

Numerical modeling for primary atomization of liquid jets

In the proposed numerical model for primary atomization, surface-wave dispersion equations are solved in conjunction with the jet-embedding technique of solving mean flow equations of a liquid jet. Linear and approximate nonlinear models have been considered. In each case, the dispersion equation is solved over the whole wavelength spectrum to predict drop sizes, frequency, and liquid-mass breakup rates without using any empirical constants. The present model has been applied to several low-speed and high-speed jets. For the high-speed case (the LOX/H2 coaxial injector of the Space Shuttle Main Engine Preburner), predicted drop sizes and liquid breakup rates are in good agreement with the results of the CICM code, which have been calibrated against measured data.

Przekwas, A. J.↗
NASA NTRS1989

Development of a stereo 3-D pictorial primary flight display

Computer-generated displays are becoming increasingly popular in aerospace applications. The use of stereo 3-D technology provides an opportunity to present depth perceptions which otherwise might be lacking. In addition, the third dimension could also be used as an additional dimension along which information can be encoded. Historically, the stereo 3-D displays have been used in entertainment, in experimental facilities, and in the handling of hazardous waste. In the last example, the source of the stereo images generally has been remotely controlled television camera pairs. The development of a stereo 3-D pictorial primary flight display used in a flight simulation environment is described. The applicability of stereo 3-D displays for aerospace crew stations to meet the anticipated needs for 2000 to 2020 time frame is investigated. Although, the actual equipment that could be used in an aerospace vehicle is not currently available, the lab research is necessary to determine where stereo 3-D enhances the display of information and how the displays should be formatted.

Nataupsky, Mark↗
NASA NTRS1989

The flexure assembly design for the SIRTF one-meter primary mirror

A titanium flexure assembly for the Space Infrared Telescope Facility (SIRTF) 1-m primary mirror has been designed to accommodate: (1) the cryogenic cool-down effect on the optical performance of the mirror, (2) the Shuttle launch-load environment, and (3) the support-baseplate manufacturing tolerances. Numerous iterations involving a multidimensional design space search led to an assembly design that provides the stiffness and strength in the vertical (optical axis) and tangential directions to accommodate launch loads, but is compliant radially to accommodate cryogenic cool down. A 'folded back' titanium flexure system was required because of the differential thermal contraction of the aluminum telescope baseplate support and the fused-silica mirror. This unique and innovative flexure assembly represents a totally passive mechanism for accommodating the design launch loads, cryogenic cool down, and out-of-plane baseplate effects.

Richard, R. M.↗
NASA NTRS1989

Rotating primary flow induction using jet-flapped blades

A new concept in ejector design is examined using primary jets exiting from a free spinning bladed rotor. This concept stems from a continuing effort in the development of Rotary-Jet thrust augmentors at George Washington University (GWU). An analysis of a Rotary-Jet rotor with jet-flapped blades is presented, identifying design trends beneficial to its performance. An experimental investigation was conducted to demonstrate the potential of this new concept. Several combinations of blade and shroud geometries were designed, fabricated and tested. The results are presented and discussed. Despite crudeness of fabrication, the maximum thrust augmentations obtained ranged from 1.55 to 2.14. These results demonstrate that this device is superior to all ejector designs tested with similar conventional passive diffusing shrouds.

Cordier, Stephane J.↗
NASA NTRS1990

A comparison of transportation node costs and their primary drivers

This paper describes the process for defining and evaluating the costs of alternative transportation node concepts for Space Station Freedom. A cost estimating methodology including costs of development, production, delivery, assembly, steady state operations, and mission-specific operations is described in detail. The primary drivers of transportation node costs are identified and discussed.

Comstock, Douglas A.↗
NASA NTRS1991

Vaporization Would Cool Primary Battery

Temperature of discharging high-power-density primary battery maintained below specified level by evaporation of suitable liquid from jacket surrounding battery, according to proposal. Pressure-relief valve regulates pressure and boiling temperature of liquid. Less material needed in cooling by vaporization than in cooling by melting. Technique used to cool batteries in situations in which engineering constraints on volume, mass, and location prevent attachment of cooling fins, heat pipes, or like.

Bhandari, Pradeep↗
NASA NTRS1990

Primary and diagenetic controls of isotopic compositions of iron-formation carbonates

Results are presented on parallel analyses of carbonate and chert microbands in segments from the early Proterozoic Dales Gorge Member of the Brockman Iron Formation (western Australia), including data on isotopic, chemical, and mineralogic variations in microbanded carbonates, cherts, and coexisting minerals in four core segments from Paraburdoo and one from Wittenoom. It is shown that patterns of variation observed in isotopic abundance and mineral composition can be consistently explained in terms of diagenetic replacement of fine-grained primary precipitates by secondary ones, rather than by mineral-dependent fractionations, metamorphism, or the influence of large volumes of water in an open system.

Kaufman, Alan J.↗
NASA NTRS1990

Design and analysis of composite primary structures for advanced launch vehicles

The current status of the Lightweight Composite Intertank Structures (LCIS) study, a program aimed at developing technologies required to apply advanced composite materials to launch vehicle primary structures, is reviewed. The launch system concept used for establishing design requirements consisted of a fully reusable winged booster and a partially reusable core vehicle. The component selected from this system for design and manufacturing studies was the core vehicle intertank adapter, a component consisting of approximately 26-ft diameter by 25 ft long stiffened cylindrical structure that separates the liquid hydrogen and liquid oxygen tanks on the core vehicle. The discussion covers the program approach, design requirements, material properties, structural analysis, and the test program.

Rix, C.↗
NASA NTRS1991

Long-term changes in the total ozone mapping spectrometer relative to world primary standard Dobson spectrometer 83

The stability of the calibration of the Nimbus 7 solar backscatter UV (SBUV) and total ozone mapping spectrometer (TOMS) instruments by comparing their ozone measurements with those made by a single, very stable Dobson instrument: the world primary standard Dobson spectrometer number 83. Measurements of ozone made with instrument 83 at Mauna Loa observatory in eight summers between 1979 and 1989 were compared with coincident TOMS ozone measurements. The comparison shows that relative to instrument 83, ozone measured by TOMS (and SBUV) was stable between 1979 and approximately 1983, had decreased by 3 percent by 1986, and had decreased by almost 7 percent by 1989. A similar time dependence is seen when data from an ensemble of 39 Dobson stations throughout the world is compared with TOMS over the period 1979-1987. The most likely reason for the relative drift is that the diffuser plate used by both SBUV and TOMS to measure solar flux has suffered an uncorrected wavelength-dependent degradation, with most of the degradation occurring after 1983. The recently released version 6 TOMS data, corrected using the internal 'pair justification' technique, show almost no drift relative to Dobson instrument 83. Accurate measurements of long-term global ozone change will require a coherent system incorporating both ground-based and satellite-based ozone measurements.

Mcpeters, Richard D.↗
NASA NTRS1990

Primary reference cell calibrations at SERI - History and methods

The tabular calibration method used at the Solar Energy Research Institute (SERI) for primary reference cells is derived and described in detail. An uncertainty analysis shows that the tabular method should have a total uncertainty of + or - 1.0 percent; data from five years of calibrations are then shown to support this analysis. Results from SERI's tabular method are compared with terrestrial calibrations performed by the NASA Lewis Research Center in the late 1970s.

Osterwald, C. R.↗
NASA NTRS1991

Primary helium heater for propellant pressurization systems

The primary helium heater is a unique design that provides direct heating of pressurant gas for large pressure fed propulsion systems. It has been conceptually designed to supply a heated (800-1000 R) pressurization gas to both a liquid oxygen and an RP-1 propellant tank. This pressurization gas is generated within the heater by mixing super critical helium (40-300 R and 3000-1600 psi) with an appropriate amount of combustion products from a 4:1 throttling stoichiometric LO2/LH2 combustor. This simple, low cost and reliable mixer utilizes the large quantity of helium to provide stoichiometric combustor cooling, extend the throttling limits and enhance the combustion stability margin. Preliminary combustion, thermal, and CFD analyses confirm that this low-pressure-drop direct helium heater can provide the constant-temperature pressurant suitable for tank pressurization of both fuel and oxidizer tanks of large pressure fed vehicles.

Reichmuth, D. M.↗
NASA NTRS1992

Primary zinc-air batteries for space power

Prismatic HR and LC cells and batteries were built and tested, and they performed well with respect to the program goals of high capacity and high rate capability at specific energies. The HR batteries suffered reduced utilizations owing to dryout at the 2 and 3 A rates for the 50 C tests owing to the requirement for forced convection. The LC batteries suffered reduced utilizations under all conditions owing to the chimney effect at 1 G, although this effect would not occur at 0 G. An empirical model was developed which accurately predicted utilizations and average voltages for single cells, although thermal effects encountered during battery testing caused significant deviations, both positive and negative, from the model. Based on the encouraging results of the test program, we believe that the zinc-air primary battery of a flat, stackable configuration can serve as a high performance and safe power source for a range of space applications.

Bragg, Bobby J.↗
NASA NTRS1992

The NDSC Primary Site at the Observatoire De Haute-provence: Ozone and Aerosols Observations (1986-1992)

The primary site of the newly implemented Network for Detection of Stratospheric Changes (NDSC) includes three main sites in the alpine regions of southern Europe. At one of these observatories, a coherent set of experimental systems has been established to monitor on a long-term basis ozone, aerosols, minor constituents, and temperature vertical distributions in the troposphere and stratosphere. Such techniques include several lidar systems, balloon-borne sondes and ultraviolet visible spectrometry. Lidar measurements of stratospheric aerosols are performed on a routine basis, since 1980. These include the vertical distribution of the extinction and backscattering coefficients from the tropopause. Recently, measurements performed following the eruption of Mount Pinatubo, have allowed researchers to follow the time evolution of the aerosol cloud in middle latitude regions.

Megie, G.↗
NASA NTRS1992

Optimal primary-backup protocols

We give primary-backup protocols for various models of failure. These protocols are optimal with respect to degree of replication, failover time, and response time to client requests.

Budhiraja, Navin↗
NASA NTRS1992

Photosynthetic characteristics and estimated growth rates indicate grazing is the proximate control of primary production in the equatorial Pacific

Macronutrients persist in the surface layer of the equatorial Pacific because the production of phytoplankton is limited; the nature of this limitation has yet to be resolved. Measurements of photosynthesis as a function of irradiance (P-I) provide information on the control of primary productivity, a question of great biogeochemical importance. Accordingly, P-I was measured in the equatorial Pacific along 150 deg W, during February-March 1988. Diel variability of P-I showed a pattern consistent with nocturnal vertical mixing in the upper 20 m followed by diurnal stratification, causing photoinhibition near the surface at midday. Otherwise, the distribution of photosynthetic parameters with depth and the stability of P-I during simulated in situ incubations over 2 days demonstrated that photoadaptation was nearly complete at the time of sampling: photoadaptation had not been effectively countered by upwelling or vertical mixing. Measurements of P-I and chlorophyll during manipulations of trace elements showed that simple precautions to minimize contamination were sufficient to obtain valid rate measurements and that the specific growth rates of phytoplankton were fairly high in situ, a minimum of 0.6/d. Diel variability of beam attenuation also indicated high specific growth rates of phytoplankton and a strong coupling of production with grazing. It appears that grazing is the proximate control on the standing crop of phytoplankton. Nonetheless, the supply of a trace nutrient such as iron might ultimately regulate productivity by influencing species composition and food-web structure.

Cullen, John J.↗
NASA NTRS1990

SIRTF primary mirror design, analysis, and testing

The primary mirror assembly (PMA) requirements and concepts for the Space Infrared Telescope Facility (SIRTF) program are discussed. The PMA studies at NASA/ARC resulted in the design of two engineering test articles, the development of a mirror mount cryogenic static load testing system, and the procurement and partial testing of a full scale spherical mirror mounting system. Preliminary analysis and testing of the single arch mirror with conical mount design and the structured mirror with the spherical mount design indicate that the designs will meet all figure and environmental requirements of the SIRTF program.

Sarver, George L., III↗
NASA NTRS1992

The influence of processing parameters on microstructural development of low-weight-percent primary, pro-eutectic, dendritic alloys during directional solidification

Alloy compositions centering about Sn- 5 to 15 wt pct Al and Pb- 4 to 20 wt pct Cu have been directionally solidified as a function of growth rate and orientation with respect to earth's gravity vector. The effect of these processing variables on macrosegregation is presented, and the consequence of a structural transition from primary columnar to equiaxed dendritic growth is examined. Effects detrimental to microstructure and attributed to density variations are shown to be minimized by a novel processing technique. In view of the ground-based results, some considerations follow regarding what might be gained by solidifying these alloys in a microgravity environment.

Grugel, R. N.↗