Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROXIMITY EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Microwave Meissner screening properties of proximity-coupled topological-insulator / superconductor bilayers

The proximity-coupled topological-insulator / superconductor (TI/SC) bilayer system is a representative system to realize topological superconductivity. In order to better understand this unique state and enable future applications of the TI/SC bilayer, a comprehensive characterization and understanding of the microscopic properties of the bilayer are required. In this work, a microwave Meissner screening study, which exploits a high-precision microwave resonator technique, is conducted on the SmB 6 /YB 6 thin-film bilayers as an example TI/SC system. The study reveals spatially dependent electrodynamic screening response of the TI/SC system that is not accessible to other techniques, from which the corresponding microscopic properties of a TI/SC bilayer can be obtained. The TI thickness dependence of the effective penetration depth suggests the existence of a bulk insulating region in the TI layer. The spatially dependent electrodynamic screening model analysis provides an estimate for the characteristic lengths of the TI/SC bilayer: normal penetration depth, normal coherence length, and the thickness of the surface states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure and magnetism in epitaxial Fe 1 + x VSb nanocomposite films

The combination of ferromagnetism and semiconducting behavior offers an avenue for realizing novel spintronics and spin-enhanced thermoelectrics. Here we demonstrate the synthesis of doped and nanocomposite half-Heusler Fe 1+x VSb films by molecular beam epitaxy. For dilute excess Fe (x < 0.1), we observe a decrease in the Hall electron concentration and no secondary phases in x-ray diffraction. Magnetotransport measurements suggest weak ferromagnetism that onsets at a temperature of T c ≈ 5 K. For higher Fe content (x > 0.1), ferromagnetic Fe nanostructures precipitate from the semiconducting FeVSb matrix. The Fe/FeVSb interfaces are epitaxial, as observed by transmission electron microscopy and x-ray diffraction. Further, magnetotransport measurements suggest proximity-induced magnetism in the FeVSb from the Fe/FeVSb interfaces, or superparamagnetically coupled Fe-rich clusters, at an onset temperature of T c ≈ 20 K.

36 MATERIALS SCIENCE↗

Fabrication system, method and apparatus for microelectromechanical devices

A fabrication system and method of fabrication for producing microelectromechanical devices such as field-effect displays using thin-film technology. A spacer is carried at its proximal end on the surface of a substrate having field-effect emitters with the spacer being enabled for tilting movement from a nested position to a deployed position which is orthogonal to the plane of the substrate. An actuator is formed with one end connected with the substrate and another end connected with spacer. The actuator is made of a shape memory alloy material which contracts when heated through the material's phase-change transition temperature. Contraction of the actuator exerts a pulling force on the spacer which is tilted to the deployed position. A plurality of the spacers are distributed over the area of the display. A glass plate having a phosphor-coated surface is fitted over the distal ends of the deployed spacer.

Johnson, A. David↗

Coulomb blockade effects in a topological insulator grown on a high- T c cuprate superconductor

The evidence for proximity-induced superconductivity in heterostructures of topological insulators and high- T c cuprates has been intensely debated. We use molecular-beam epitaxy to grow thin films of topological insulator Bi 2 Te 3 on a cuprate Bi 2 Sr 2 CaCu 2 O 8+x , and study the surface of Bi 2 Te 3 using low-temperature scanning tunneling microscopy and spectroscopy. In few unit-cell thick Bi 2 Te 3 films, we find a V-shaped gap-like feature at the Fermi energy in d I /d V spectra. By reducing the coverage of Bi 2 Te 3 films to create nanoscale islands, we discover that this spectral feature dramatically evolves into a much larger hard gap, which can be understood as a Coulomb blockade gap. This conclusion is supported by the evolution of d I /d V spectra with the lateral size of Bi 2 Te 3 islands, as well as by topographic measurements that show an additional barrier separating Bi 2 Te 3 and Bi 2 Sr 2 CaCu 2 O 8+x . We conclude that the prominent gap-like feature in d I /d V spectra in Bi 2 Te 3 films is not a proximity-induced superconducting gap. Instead, it can be explained by Coulomb blockade effects, which take into account additional resistive and capacitive coupling at the interface. Our experiments provide a fresh insight into the tunneling measurements of complex heterostructures with buried interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Estimation of Errors in Stress Distributions Computed in Finite Element Simulations of Polycrystals

The accuracy of the stresses predicted from crystal plasticity-based finite element formulation depends on estimation and control of the errors associated with the discretization. In the current work, the errors in the stress distribution are estimated in virtual polycrystalline samples of α-phase titanium (hexagonal close-packed phase of Ti–6Al– 4 V). To estimate the error, the stress field, which does not possess inter-element continuity, is smoothed over a grain using an L 2 projection, thereby providing continuous stress distributions with inter-element continuity. The differences between the continuous (smooth) and discontinuous (raw) stress fields are calculated at individual Gauss quadrature points and used to estimate errors for corresponding elements and grains. Error estimations are performed for a Voronoi-tessellated microstructure, an equiaxed microstructure, and two microstructures with varying grain sizes for tensile loading extending into the fully plastic regime (≈ 5% extension). Magnitudes of the errors are found to depend on microstructural characteristics, particularly the shape and size of grains. Samples having variations in grain size or having less spherical grains exhibited higher errors than samples with uniformly sized, equiaxed grains, with the size variations having a more pronounced effect. In conclusion, errors correlate with proximity to grain boundaries at small (elastic) strains and with deformation-induced features (deformation bands) at large strains.

42 ENGINEERING↗

Probing the meta-stability of oxide core/shell nanoparticle systems at atomic resolution

Hybrid nanoparticles allow exploiting the interplay of confinement, proximity between different materials and interfacial effects. However, to harness their properties an in-depth understanding of their (meta)stability and interfacial characteristics is crucial. This is especially the case of nanosystems based on functional oxides working under reducing conditions, which may severely impact their properties. Here, the in-situ electron-induced selective reduction of Mn 3 O 4 to MnO is studied in magnetic Fe 3 O 4 /Mn 3 O 4 and Mn 3 O 4 /Fe 3 O 4 core/shell nanoparticles by means of high-resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Such in-situ transformation allows mimicking the actual processes in operando environments. A multi-stage image analysis using geometric phase analysis combined with particle image velocity enables direct monitoring of the relationship between structure, chemical composition and strain relaxation during the Mn 3 O 4 reduction. In the case of Fe 3 O 4 /Mn 3 O 4 core/shell the transformation occurs smoothly without the formation of defects. However, for the inverse Mn 3 O 4 /Fe 3 O 4 core/shell configuration the electron beam-induced transformation occurs in different stages that include redox reactions and void formation followed by strain field relaxation via formation of defects. This study highlights the relevance of understanding the local dynamics responsible for changes in the particle composition in order to control stability and, ultimately, macroscopic functionality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of acid site speciation and spatial gradients on zeolite catalysis

This mini-review provides an overview of the current state of acid site control in zeolite catalysts, including methods of synthesis, advanced characterization, and measured effects of acid properties (speciation, concentration, proximity, siting, and spatial distribution) on a variety of commerciallyrelevant reactions. The diversity of aluminum species is described with respect to their location at specific sites in zeolite crystals as well as mesoscopic gradients in elemental composition that give rise to zoned or core-shell architectures. Challenges in the identification of acid siting are highlighted within the context of trial-and-error synthesis methods for a range of aluminosilicate frameworks, which hinder a priori design of catalysts, and limitations in techniques to suitably characterize active sites. Emphasis is also placed on knowledge gaps in zeolite catalysis wherein broad development of structure-performance relationships relies on future advancement of synthesis and analytical methods in parallel with atomistic modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proximity to Graphene Dramatically Alters Polymer Dynamics

Proximity to graphene has an extraordinary effect on the dynamics of entangled chains, as evidenced by strong slowing of thermally stimulated fluctuations at the surface of a thin supported film of polystyrene (PS) when a single layer of graphene is placed between the supporting substrate and the PS film. Furthermore, this slowing is due to a layer of highly viscous polymer next to the substrate being thicker for graphene (75 nm or 7.5 R g ) than for silicon (13 nm or 1.3 R g ). Molecular dynamics simulations of unentangled PS chain melts on silicon and on multiple layers of graphene show the work of adhesion with graphene is roughly four times larger than that with silicon. In addition, PS chains adjacent to silicon readily form “loops”, with phenyl rings pointing predominantly toward the substrate. Chains adjacent to graphene more readily form trains, with the phenyl rings predominantly parallel to the graphene.

36 MATERIALS SCIENCE↗

Structural Evidence for a Dehydrated Intermediate in Green Fluorescent Protein Chromophore Biosynthesis

The acGFPL is the first-identified member of a novel, colorless and non-fluorescent group of green fluorescent protein (GFP)-like proteins. Its mutant aceGFP, with Gly replacing the invariant catalytic Glu-222, demonstrates a relatively fast maturation rate and bright green fluorescence ({lambda}{sub ex} = 480 nm, {lambda}{sub em} = 505 nm). The reverse G222E single mutation in aceGFP results in the immature, colorless variant aceGFP-G222E, which undergoes irreversible photoconversion to a green fluorescent state under UV light exposure. Here we present a high resolution crystallographic study of aceGFP and aceGFP-G222E in the immature and UV-photoconverted states. A unique and striking feature of the colorless aceGFP-G222E structure is the chromophore in the trapped intermediate state, where cyclization of the protein backbone has occurred, but Tyr-66 still stays in the native, non-oxidized form, with C{sup {alpha}} and C{sup {beta}} atoms in the sp{sup 3} hybridization. This experimentally observed immature aceGFP-G222E structure, characterized by the non-coplanar arrangement of the imidazolone and phenolic rings, has been attributed to one of the intermediate states in the GFP chromophore biosynthesis. The UV irradiation ({lambda} = 250-300 nm) of aceGFP-G222E drives the chromophore maturation further to a green fluorescent state, characterized by the conventional coplanar bicyclic structure with the oxidized double Tyr-66 C{sup {alpha}} = C{sup {beta}} bond and the conjugated system of {pi}-electrons. Structure-based site-directed mutagenesis has revealed a critical role of the proximal Tyr-220 in the observed effects. In particular, an alternative reaction pathway via Tyr-220 rather than conventional wild type Glu-222 has been proposed for aceGFP maturation.

59 BASIC BIOLOGICAL SCIENCES↗

Structural, electronic, and magnetic properties of nearly ideal J eff = 1/2 iridium halides

Heavy transition metal magnets with J e f f = 1 2 electronic ground states have attracted recent interest due to their penchant for hosting new classes of quantum spin liquids and superconductors. Unfortunately, model systems with ideal J e f f = 1 2 states are scarce due to the importance of noncubic local distortions in most candidate materials. In this work, we identify a family of iridium halide systems [i.e., K 2 Ir Cl 6 , K 2 Ir Br 6 , ( NH 4 ) 2 Ir Cl 6 , and Na 2 Ir Cl 6 · 6 ( H 2 O ) ] with Ir 4 + electronic ground states exhibiting extremely small deviations from the ideal J e f f = 1 2 limit. We also find ordered magnetic ground states for the three anhydrous systems, with single-crystal neutron diffraction on K 2 Ir Br 6 revealing type-I antiferromagnetism. This spin configuration is consistent with expectations for significant Kitaev exchange in a face-centered-cubic magnet. This work establishes that incorporating isolated Ir X 6 octahedra in materials, where X is a halogen ion with a low electronegativity, is an effective design principle for realizing unprecedented proximity to the pure J e f f = 1 2 state. However, at the same time, we highlight undeniable deviations from this ideal state, even in clean materials with ideal Ir X 6 octahedra as inferred from the global cubic crystal structures.

36 MATERIALS SCIENCE↗

Multi-year assessment of the impact of ship-borne radiosonde observations on polar WRF forecasts in the Arctic

Abstract To compensate for the lack of conventional observations over the Arctic Ocean, ship-borne radiosonde observations have been regularly carried out during summer Arctic expeditions and the observed data have been broadcast via the global telecommunication system since 2017. With these data obtained over the data-sparse Arctic Ocean, observing system experiments were carried out using a polar-optimized version of the Weather Research and Forecasting (WRF) model and the WRF Data Assimilation (WRFDA) system to investigate their effects on analyses and forecasts over the Arctic. The results of verification against reanalysis data reveal: (1) DA effects on analyses and forecasts; (2) the reason for the year-to-year variability of DA effects; and (3) the possible role of upper-level potential vorticity in delayed DA effects. The overall assimilation effects of the extra data on the analyses and forecasts over the Arctic are positive. Initially, the DA effects are the most apparent in the temperature variables in the middle/lower troposphere, which spread to the wind variables in the upper troposphere. The effects decrease with time but reappear after approximately 120 h, even in the 240-h forecasts. The effects on forecasts vary depending on the proximity of the radiosonde observation locations to the high synoptic variability. The upper-level potential vorticity is known to play an important role in the development of Arctic cyclones, and it is suggested as a possible explanation for the delayed DA effects after about 120 h.

Geology↗

Isolator fragmentation and explosive initiation tests

Three tests were conducted to evaluate the effects of firing an isolator in proximity to a barrier or explosive charge. The tests with explosive were conducted without barrier, on the basis that since any barrier will reduce the shock transmitted to the explosive, bare explosive represents the worst-case from an inadvertent initiation perspective. No reaction was observed. The shock caused by the impact of a representative plastic material on both bare and cased PBX9501 is calculated in the worst-case, 1-D limit, and the known shock response of the HE is used to estimate minimum run-to-detonation lengths. The estimates demonstrate that even 1-D impacts would not be of concern and that, accordingly, the divergent shocks due to isolator fragment impact are of no concern as initiating stimuli.

36 MATERIALS SCIENCE↗

Isolator fragmentation and explosive initiation tests

Three tests were conducted to evaluate the effects of firing an isolator in proximity to a barrier or explosive charge. The tests with explosive were conducted without a barrier, on the basis that since any barrier will reduce the shock transmitted to the explosive, bare explosive represents the worst-case from an inadvertent initiation perspective. No reaction was observed. The shock caused by the impact of a representative plastic material on both bare and cased PBX 9501 is calculated in the worst-case, 1-D limit, and the known shock response of the HE is used to estimate minimum run-to-detonation lengths. The estimates demonstrate that even 1-D impacts would not be of concern and that, accordingly, the divergent shocks due to isolator fragment impact are of no concern as initiating stimuli.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Air Flow Modeling in the Wind Tunnel of the FHWA Aerodynamics Laboratory at Turner-Fairbank Highway Research Center

Computational fluid dynamics (CFD) modeling is widely used in industry for design and in the research community to support, compliment, and extend the scope of experimental studies. Analysis of transportation infrastructure using high performance cluster computing with CFD and structural mechanics software is done at the Transportation Research and Analysis Computing Center (TRACC) at Argonne National Laboratory. These resources, available at TRACC, were used to perform advanced three-dimensional computational simulations of the wind tunnel laboratory at the Turner-Fairbank Highway Research Center (TFHRC). The goals were to verify the CFD model of the laboratory wind tunnel and then to use versions of the model to provide the capability to (1) perform larger parametric series of tests than can be easily done in the laboratory with available budget and time, (2) to extend testing to wind speeds that cannot be achieved in the laboratory, and (3) to run types of tests that are very difficult or impossible to run in the laboratory. Modern CFD software has many physics models and domain meshing options. Models, including the choice of turbulence and other physics models and settings, the computational mesh, and the solver settings, need to be validated against measurements to verify that the results are sufficiently accurate for use in engineering applications. The wind tunnel model was built and tested, by comparing to experimental measurements, to provide a valuable tool to perform these types of studies in the future as a complement and extension to TFHRC’s experimental capabilities. Wind tunnel testing at TFHRC is conducted in a subsonic open-jet wind tunnel with a 1.83 m (6 foot) by 1.83 m (6 foot) cross section. A three component dual force-balance system is used to measure forces acting on tested models, and a three degree of freedom suspension system is used for dynamic response tests. Pictures of the room are shown in Figure 1-1 to Figure 1-4. A detailed CAD geometry and CFD model of the wind tunnel laboratory at TFHRC was built and tested. Results were compared against experimental wind velocity measurements at a large number of locations around the room. This testing included an assessment of the air flow uniformity provided by the tunnel to the test zone and assessment of room geometry effects, such as influence of the proximity the room walls, the non-symmetrical position of the tunnel in the room, and the influence of the room setup on the air flow in the room. This information is useful both for simplifying the computational model and in deciding whether or not moving, or removing, some of the furniture or other movable objects in the room will change the flow in the test zone.

97 MATHEMATICS AND COMPUTING↗

Parameter estimation of powered-lift STOL aircraft characteristics including turbulence and ground effects

The estimation of longitudinal aerodynamic coefficients from data recorded during flight tests of a powered-lift STOL aircraft is considered. First, a comparison is made between the coefficient values determined by the regression and quasilinearization identification techniques from records taken during elevator pulse maneuvers. The results show that for these tests the regression method provides less scatter in coefficient estimates and provides better correlation with the predicted values. Special techniques are then developed which allow identification of the coefficients from records taken during landing maneuvers in which the aircraft encounters turbulence while flying in ground effect. Flight test results are presented to illustrate the effects of air turbulence and ground proximity on the estimated coefficient values.

Wingrove, R. C.↗

Parameter estimation of powered-lift STOL aircraft characteristics including turbulence and ground effects

Longitudinal aerodynamic coefficients are estimated from data recorded during flight tests of a powered-lift STOL aircraft. A comparison is made between the coefficient values determined by the regression and quasilinearization identification techniques from records taken during elevator pulse maneuvers. The results show that for these tests the regression method provides less scatter in coefficient estimates and provides better correlation with the predicted values. Special techniques are developed which allow identification of the coefficients from records taken during landing maneuvers in which the aircraft encounters turbulence while flying in ground effect. Flight test results are presented to illustrate the effects of air turbulence and ground proximity on the estimated coefficient values.

Wingrove, R. C.↗

Tethers and asteroids for artificial gravity assist in the solar system

Analytical models are defined for gravity-assist trajectory changes for spacecraft passing massive compact bodies. The models are applied in an examination of the benefits of lowering a tether to an asteroid during a flyby in order to gain a trajectory change equivalent to that from a massive body (planet). Direct flybys yield velocity gains while retrograde flybys shed velocity. The magnitude of the effects are a function of the proximity to the body during flyby. This inherently limits the gravity assist technique used around planets, which usually have atmospheres and can have intense radiation fields. If a spacecraft could extend a tether (such as to be tested on the Orbiter) to snag on an asteroid surface, the potential trajectory/velocity change of the spacecraft would be limited mainly by the tether strength. The encounter physics are treated as a soft collision. Possible applications of the asteroid tether technique are outer planet, Mars and main belt asteroid exploration missions.

Penzo, P. A.↗

A computer module used to calculate the horizontal control surface size of a conceptual aircraft design

The creation of a computer module used to calculate the size of the horizontal control surfaces of a conceptual aircraft design is discussed. The control surface size is determined by first calculating the size needed to rotate the aircraft during takeoff, and, second, by determining if the calculated size is large enough to maintain stability of the aircraft throughout any specified mission. The tail size needed to rotate during takeoff is calculated from a summation of forces about the main landing gear of the aircraft. The stability of the aircraft is determined from a summation of forces about the center of gravity during different phases of the aircraft's flight. Included in the horizontal control surface analysis are: downwash effects on an aft tail, upwash effects on a forward canard, and effects due to flight in close proximity to the ground. Comparisons of production aircraft with numerical models show good accuracy for control surface sizing. A modified canard design verified the accuracy of the module for canard configurations. Added to this stability and control module is a subroutine that determines one of the three design variables, for a stable vectored thrust aircraft. These include forward thrust nozzle position, aft thrust nozzle angle, and forward thrust split.

Sandlin, Doral R.↗