Search NASA⌕ Search

SEARCH · Search NASA

Results for “Paper Based Procedures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

An efficient pressure-velocity procedure for gas-droplet two-phase flow calculations

This paper presents a noniterative numerical technique for computing time-dependent gas-droplet flows. The method is a fully interacting combination of Eulerian fluid and Lagrangian particle calculations. The interaction calculations between the two phases are formulated on a pressure-velocity-coupling procedure based on the operator-splitting technique. This procedure eliminates the global iterations required in the conventional particle-source-in-cell procedure. Turbulent dispersion calculations are treated by a stochastic procedure. Numerical calculations and comparisons with available experimental data as well as efficiency assessments are given for some sprays typical of spray combustion applications.

Chen, C. P.↗
NASA NTRS2017

Advanced Environmentally Resistant Lithium Fluoride Mirror Coatings for the Next Generation of Broadband Space Observatories

Recent advances in the physical vapor deposition (PVD) of protective fluoride films have raised the far-ultraviolet (FUV: 912-1600 A) reflectivity of aluminum-based mirrors closer to the theoretical limit. The greatest gains, at more than 20%, have come for lithium fluoride-protected aluminum, which has the shortest wavelength cutoff of any conventional overcoat. Despite the success of the NASA FUSE mission, the use of lithium fluoride (LiF)-based optics is rare, as LiF is hygroscopic and requires handling procedures that can drive risk. With NASA now studying two large mission concepts for astronomy, Large UV-Optical-IR Surveyor (LUVOIR) and the Habitable Exoplanet Imaging Mission (HabEx), which mandate throughput down to 1000 , the development of LiF-based coatings becomes crucial. This paper discusses steps that are being taken to qualify these new enhanced LiF-protected aluminum (eLiF) mirror coatings for flight. In addition to quantifying the hygroscopic degradation, we have developed a new method of protecting eLiF with an ultrathin (10-20 A) capping layer of a nonhygroscopic material to increase durability. We report on the performance of eLiF-based optics and assess the steps that need to be taken to qualify such coatings for LUVOIR, HabEx, and other FUV-sensitive space missions.

Fleming, Brian↗
NASA NTRSDate not supplied

PLANETARY DEFENSE: FINDINGS AND RECOMMENDATIONS FROM THE NATIONAL ACADEMIES PLANETARY SCIENCE AND ASTROBIOLOGY DECADAL SURVEY 2023 - 2032

The National Academies of Sciences, Engineering, and Medicine was chartered by the NASA Science Mission Directorate (SMD), with support from the National Science Foundation, to conduct a new decadal survey to develop a comprehensive science and mission strategy for planetary science (1). The survey was tasked to determine the current state of knowledge and to identify the most important scientific questions to be addressed in astrobiology and planetary science during the upcoming decade of 2023 - 2032. For the first time, the decadal survey also included and addressed the topic of planetary defense, now recognized as a key element of NASA’s planetary science activities under the direction of NASA’s SMD Planetary Defense Coordination Office. The topic of planetary defense was included in the decadal survey as a dedicated chapter, divided into five sections based on the framework from the U.S. National NEO Preparedness Strategy and Action Plan (2). These sections discussed: NEO Detection, Tracking, and Characterization NEO Modelling, Prediction, and Integration NEO Deflection and Disruption Missions International Cooperation on NEO Preparation NEO Impact Emergency Procedures and Action Protocols Content of these sections included identifying the activities, ground- and space-based assets, facilities, resources, technologies, and missions that should be considered to enable NEO preparedness over the next decade. Supporting inputs to this chapter involved contributions from submitted white papers authored by many members of the NEO science and planetary defense communities. In addition, a planetary defense rapid mission architecture study commissioned by the decadal survey small bodies panel and led by the Jet Propulsion Laboratory examined several different types of in-situ characterization and mitigation demonstration missions. All of this input contributed to the formulation of 42 findings and 11 recommendations that suggest a path forward for increasing our understanding of the NEO population and their associated physical characteristics, modelling the impact probabilities and hazard potential of these objects, and implementing plans to develop and test NEO impact mitigation capabilities. Including planetary defense in the decadal survey has helped sharpen the focus on this international issue and provided key inputs for stakeholders and decision makers to consider when developing future planetary defense-related activities. Such information is vital for developing a long-term integrated planetary defense capability able to protect humanity in the decades to come.

NEO Detection and Characterization↗
DOE OSTI2013

An angularly refineable phase space finite element method with approximate sweeping procedure

An angularly refineable phase space finite element method is proposed to solve the neutron transport equation. The method combines the advantages of two recently published schemes. The angular domain is discretized into small patches and patch-wise discontinuous angular basis functions are restricted to these patches, i.e. there is no overlap between basis functions corresponding to different patches. This approach yields block diagonal Jacobians with small block size and retains the possibility for S{sub n}-like approximate sweeping of the spatially discontinuous elements in order to provide efficient preconditioners for the solution procedure. On the other hand, the preservation of the full FEM framework (as opposed to collocation into a high-order S{sub n} scheme) retains the possibility of the Galerkin interpolated connection between phase space elements at arbitrary levels of discretization. Since the basis vectors are not orthonormal, a generalization of the Riemann procedure is introduced to separate the incoming and outgoing contributions in case of unstructured meshes. However, due to the properties of the angular discretization, the Riemann procedure can be avoided at a large fraction of the faces and this fraction rapidly increases as the level of refinement increases, contributing to the computational efficiency. In this paper the properties of the discretization scheme are studied with uniform refinement using an iterative solver based on the S{sub 2} sweep order of the spatial elements. The fourth order convergence of the scalar flux is shown as anticipated from earlier schemes and the rapidly decreasing fraction of required Riemann faces is illustrated. (authors)

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2015

Tailored multivariate analysis for modulated enhanced diffraction

Modulated enhanced diffraction (MED) is a technique allowing the dynamic structural characterization of crystalline materials subjected to an external stimulus, which is particularly suited for in situ and operando structural investigations at synchrotron sources. Contributions from the (active) part of the crystal system that varies synchronously with the stimulus can be extracted by an offline analysis, which can only be applied in the case of periodic stimuli and linear system responses. In this paper a new decomposition approach based on multivariate analysis is proposed. The standard principal component analysis (PCA) is adapted to treat MED data: specific figures of merit based on their scores and loadings are found, and the directions of the principal components obtained by PCA are modified to maximize such figures of merit. As a result, a general method to decompose MED data, called optimum constrained components rotation (OCCR), is developed, which produces very precise results on simulated data, even in the case of nonperiodic stimuli and/or nonlinear responses. The multivariate analysis approach is able to supply in one shot both the diffraction pattern related to the active atoms (through the OCCR loadings) and the time dependence of the system response (through the OCCR scores). When applied to real data, OCCR was able to supply only the latter information, as the former was hindered by changes in abundances of different crystal phases, which occurred besides structural variations in the specific case considered. To develop a decomposition procedure able to cope with this combined effect represents the next challenge in MED analysis.

Caliandro, Rocco↗
DOE OSTI2018

Advancing Understanding of the +4 Metal Extractant Thenoyltrifluoroacetonate (TTA – ); Synthesis and Structure of M IV TTA 4 (M IV = Zr, Hf, Ce, Th, U, Np, Pu) and M III (TTA) 4 – (M III = Ce, Nd, Sm, Yb)

Thenoyltrifluoroacetone (HTTA)-based extractions represent popular methods for separating microscopic amounts of transuranic actinides (i.e., Np and Pu) from macroscopic actinide matrixes (e.g. bulk uranium). It is well-established that this procedure enables +4 actinides to be selectively removed from +3, + 5, and +6 f-elements. However, even highly skilled and well-trained researchers find this process complicated and (at times) unpredictable. It is difficult to improve the HTTA extraction—or find alternatives—because little is understood about why this separation works. Even the identities of the extracted species are unknown. In addressing this knowledge gap, we report in this paper advances in fundamental understanding of the HTTA-based extraction. This effort included comparatively evaluating HTTA complexation with +4 and +3 metals (M IV = Zr, Hf, Ce, Th, U, Np, and Pu vs M III = Ce, Nd, Sm, and Yb). We observed +4 metals formed neutral complexes of the general formula M IV (TTA) 4 . Meanwhile, +3 metals formed anionic M III (TTA) 4 – species. Characterization of these M(TTA) 4 x– (x = 0, 1) compounds by UV–vis–NIR, IR, 1 H and 19 F NMR, single-crystal X-ray diffraction, and X-ray absorption spectroscopy (both near-edge and extended fine structure) was critical for determining that Np IV (TTA) 4 and Pu IV (TTA) 4 were the primary species extracted by HTTA. Furthermore, this information lays the foundation to begin developing and understanding of why the HTTA extraction works so well. The data suggest that the solubility differences between M IV (TTA) 4 and M III (TTA) 4 – are likely a major contributor to the selectivity of HTTA extractions for +4 cations over +3 metals. Finally and moreover, these results will enable future studies focused on explaining HTTA extractions preference for +4 cations, which increases from Np IV to Pu IV , Hf IV , and Zr IV .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Making maps of cosmic microwave background polarization for B-mode studies: the POLARBEAR example

Analysis of cosmic microwave background (CMB) datasets typically requires some filtering of the raw time-ordered data. For instance, in the context of ground-based observations, filtering is frequently used to minimize the impact of low frequency noise, atmospheric contributions and/or scan synchronous signals on the resulting maps. In this paper, we have explicitly constructed a general filtering operator, which can unambiguously remove any set of unwanted modes in the data, and then amend the map-making procedure in order to incorporate and correct for it. We show that such an approach is mathematically equivalent to the solution of a problem in which the sky signal and unwanted modes are estimated simultaneously and the latter are marginalized over. We investigated the conditions under which this amended map-making procedure can render an unbiased estimate of the sky signal in realistic circumstances. We then discuss the potential implications of these observations on the choice of map-making and power spectrum estimation approaches in the context of B-mode polarization studies. Specifically, we have studied the effects of time-domain filtering on the noise correlation structure in the map domain, as well as impact it may haveon the performance of the popular pseudo-spectrum estimators. We conclude that although maps produced by the proposed estimators arguably provide the most faithful representation of the sky possible given the data, they may not straightforwardly lead to the best constraints on the power spectra of the underlying sky signal and special care may need to be taken to ensure this is the case. By contrast, simplified map-makers which do not explicitly correct for time-domain filtering, but leave it to subsequent steps in the data analysis, may perform equally well and be easier and faster to implement. We focused on polarization-sensitive measurements targeting the B-mode component of the CMB signal and apply the proposed methods to realistic simulations based on characteristics of an actual CMB polarization experiment, POLARBEAR. Finally, our analysis and conclusions are however more generally applicable.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Evaluation of the environmental impact assessment system and implementation in Myanmar: Its significance in oil and gas industry

Myanmar's political and economic transformation and drastic expansion of foreign direct investment in natural resource sector necessitate systematic safeguards to mitigate impacts from its development activities. Myanmar promulgated the first national EIA law and procedure only recently, in 2016, and the country's institutional and financial capacity is extremely limited to implement effective EIA. This article evaluates Myanmar's EIA system against a set of evaluative criteria developed by Wood (1995) and modified by Annandle (2001). The evaluation was based on the review of the literature, investigation of EIA legislative and administrative framework, and several other sources of data and information. Opinions of professionals from international and government agencies, and researchers are also solicited. The paper then evaluates the rate of EIA disclosure in O&G sector and whether EIA in Myanmar is significance in mitigating the impact of O&G operations on the environment. The review of EIA system indicates that Myanmar generally has sound legal and administrative framework for EIA, however, its practical implementation reveals several major challenges and weaknesses. The presence of more than one standard EIA procedure and lack of inter-departmental coordination and consultation are also major concerns. Overall, the quality of EIA reports and the level of disclosure in O&G sector is higher than that of other sectors in Myanmar. Through the analysis, the paper summarizes the fundamental challenges faced by companies and government, opportunities and good practices in implementing EIA systems and propose recommendations to strengthen EIA performance. The findings of this study expect to contribute to strengthening EIA system and performance in Myanmar and other developing countries, especially in Southeast Asia.

02 PETROLEUM↗
DOE OSTI2015

Red fluorescent zinc oxide nanoparticle: A novel platform for cancer targeting

Multifunctional zinc oxide (ZnO) nanoparticles (NPs) with well-integrated multimodality imaging capacities have generated increasing research interest in the past decade. However, limited progress has been made in developing ZnO NP-based multimodality tumor-imaging agents. In this paper, we developed novel red fluorescent ZnO NPs and described the successful conjugation of 64 Cu ( t 1/2 = 12.7 h) and TRC105, a chimeric monoclonal antibody against CD105, to these ZnO NPs via well-developed surface engineering procedures. The produced dual-modality ZnO NPs were readily applicable for positron emission tomography (PET) imaging and fluorescence imaging of the tumor vasculature. Their pharmacokinetics and tumor-targeting efficacy/specificity in mice bearing murine breast 4T1 tumor were thoroughly investigated. In conclusion, ZnO NPs with dual-modality imaging properties can serve as an attractive candidate for future cancer theranostics.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Synthesis of stiffness and mass matrices from experimental vibration modes.

With highly complex structures, it is sometimes desirable to derive a dynamic model of the system from experimental vibration data. This paper presents algorithms for synthesizing the mass and stiffness matrices from experimentally derived modal data in a way which preserves the physical significance of the individual mass and stiffness elements. The synthesizing procedures allow for the incorporation of other mass and stiffness data, whether empirical or based on the analyst's insight. The mass and stiffness matrices are derived for a cantilever beam example and are compared with those obtained using earlier techniques.

Ross, R. G., Jr.↗
NASA NTRS1978

Use of piloted simulation for studies of fighter departure/spin susceptibility

The NASA-Langley Research Center has incorporated into its stall/spin research program on military airplanes the use of piloted, fixed-base simulation to complement the existing matrix of unique research testing techniques. The piloted simulations of fighter stall/departure flight dynamics are conducted on the Langley Differential Maneuvering Simulator (DMS). The paper reviews the objectives of the simulation research, presents the rationale underlying the simulation methods and procedures used in the evaluation of airplane characteristics, and discuss in detail the evaluation steps used to assess fighter stall/departure characteristics. Simulation results are presented to illustrate the flight-dynamics phenomena dealt with. The use of the piloted simulation methods and procedures described has been found very effective in identifying stability and control problem areas and in developing automatic control concepts to alleviate many of these problems. A good level of correlation between simulated flight dynamics and flight-test results has been obtained over the many fighter configurations studied in the simulator.

Gilbert, W. P.↗
NASA NTRS1990

Finite-dimensional compensators for infinite-dimensional systems via Galerkin-type approximation

In this paper existence and construction of stabilizing compensators for linear time-invariant systems defined on Hilbert spaces are discussed. An existence result is established using Galkerin-type approximations in which independent basis elements are used instead of the complete set of eigenvectors. A design procedure based on approximate solutions of the optimal regulator and optimal observer via Galerkin-type approximation is given and the Schumacher approach is used to reduce the dimension of compensators. A detailed discussion for parabolic and hereditary differential systems is included.

Ito, Kazufumi↗
NASA NTRS1992

An efficient finite element method for aircraft de-icing problems

In this paper, a finite element formulation based on an assumed states method is proposed for the solution of heat conduction problems with phase change at a fixed temperature. Attention is directed toward reduction of computer cost through the use of an efficient formulation, solver and algorithm. The procedure is applied to the analysis of an electrothermally deiced aircraft surface.

Huang, J. R.↗
DOE OSTI2017

Polymers for Traveling Wave Ion Mobility Spectrometry Calibration

One of the main issues when using traveling wave ion mobility spectrometry (TWIMS) for the determination of collisional cross-section (CCS) concerns the need for a robust calibration procedure built from referent ions of known CCS. Here, we implement synthetic polymer ions as CCS calibrants in positive ion mode. Based on their intrinsic polydispersities, polymers offer in a single sample the opportunity to generate, upon electrospray ionization, numerous ions covering a broad mass range and a large CCS window for different charge states at a time. In addition, the key advantage of polymer ions as CCS calibrants lies in the robustness of their gas-phase structure with respect to the instrumental conditions, making them less prone to collisional-induced unfolding (CIU) than protein ions. In this paper, we present a CCS calibration procedure using sodium cationized polylactide and polyethylene glycol, PLA and PEG, as calibrants with reference CCS determined on a home-made drift tube. Our calibration procedure is further validated by testing the polymer calibration to determine CCS of numerous different ions for which CCS are reported in the literature. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Navier–Stokes Characteristic Boundary Conditions Using Ghost Cells

Solution methods for the compressible Navier–Stokes equations based on finite volume discretizations often implement boundary conditions using ghost cells outside of the computational domain. Filling the ghost cells using straightforward zeroth-or first-order extrapolation, although computationally expedient, is well known to fail even for some simple flows, especially when turbulent structures interact with the boundaries or if time-varying inflow conditions are imposed. The Navier–Stokes characteristic boundary condition approach provides more accurate boundary conditions, but requires the use of special discretizations at boundaries. The present paper develops a new technique based on the Navier–Stokes characteristic boundary condition approach to derive values for ghost cells that significantly improve the treatment of boundaries over simple extrapolation, but retain the ghost cell approach. Furthermore, it is demonstrated in the context of a Godunov integration procedure that the new method provides accurate results, while allowing the use of the same stencil and numerical methodology near the boundaries as in the interior.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1990

Monitoring of contact stresses in advanced propulsion systems

This paper discusses a new and innovative numerical procedure for evaluating and monitoring contact stresses in the mating surfaces of propulsion systems. The procedure is intended to extend the range of applicability and the accuracy of contact stress analyses. Originally proposed by Burton Paul, et. al., (1981) the procedure is based upon fundamental solutions from the theory of elasticity. It is an iterative numerical procedure. It is believed that the method has distinct advantages over the classical Hertz method, the finite-element method and over existing approaches with the boundary element method. Several examples are discussed. Favorable comparisons are obtained with classical results. Applications with mating element of propulsion systems are discussed.

Somprakit, Paisan↗
NASA NTRS1988

Maximum likelihood identification for large space structures

This paper examines the use of on-orbit identification based on Maximum Likelihood Estimation (MLE) to provide these high-order, high-accuracy control design models for large space structures (LSS's). First, it outlines a general MLE identification algorithm, together with a covariance-analysis procedure to assess algorithm performance in terms of systematic and stochastic errors. Next, it examines various simplifications appropriate for the LSS identification application. Simplified analytical performance results are presented, as are numerical results to support these analyses. Finally, a graphical interpretation of these results is given.

Barrett, Michael F.↗
NASA NTRS2007

Morphological Feature Extraction for Automatic Registration of Multispectral Images

The task of image registration can be divided into two major components, i.e., the extraction of control points or features from images, and the search among the extracted features for the matching pairs that represent the same feature in the images to be matched. Manual extraction of control features can be subjective and extremely time consuming, and often results in few usable points. On the other hand, automated feature extraction allows using invariant target features such as edges, corners, and line intersections as relevant landmarks for registration purposes. In this paper, we present an extension of a recently developed morphological approach for automatic extraction of landmark chips and corresponding windows in a fully unsupervised manner for the registration of multispectral images. Once a set of chip-window pairs is obtained, a (hierarchical) robust feature matching procedure, based on a multiresolution overcomplete wavelet decomposition scheme, is used for registration purposes. The proposed method is validated on a pair of remotely sensed scenes acquired by the Advanced Land Imager (ALI) multispectral instrument and the Hyperion hyperspectral instrument aboard NASA's Earth Observing-1 satellite.

Plaza, Antonio↗