Search NASA⌕ Search

SEARCH · Search NASA

Results for “Particle Mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Electronic transport in heavily doped Ag/n-Si composite films

Hall measurements characterized Ag/n-Si composite films 1 micron thick produced by magnetron co-sputtering onto high resistivity Si (111) substrates at 550°C. The targets were Ag and n-type Si doped with 3 × 10{sup 19}/cm{sup 3} of antimony. Films were prepared with 13, 16 and 22 at. % Ag and measured over a temperature range 77–500°K. Conduction takes place at low temperatures by variable rang hopping in localized states at the Fermi level and by thermal activation over grain boundaries at higher temperatures. The Log Resistivity vs 1/kT curves for the three Ag concentrations vary in a similar manner, but decrease in magnitude with increasing Ag due to the smaller number of grain boundaries between Ag nanoparticles occurring with increasing Ag concentration. At low temperatures Hall mobilities are essentially independent of temperature as the carrier densities for the three Ag concentrations are constant from 77 to slightly under 300°K with resistivities varying by small amounts. The mobilities at all Ag concentrations increase with temperature and approach each other as the effects of grain boundaries become less important. This work presents for the first time the effects of metal particles embedded in a semiconductor on the transport properties of carriers in the semiconductor. Though these effects are for a given average particle size most of the results are expected to hold over a range of particle sizes. Free electrons produced in films containing 13 and 16 at. % Ag result in concentrations of 1.5 × 10{sup 19}/cm{sup 3}, one half the antimony doping, while those with 22 at. % Ag, the carrier concentrations are three orders of magnitude higher. These constant carrier concentrations are due to the metal-insulator transition that occurs in doped crystalline and polycrystalline silicon for carrier densities n{sub c} >3.9 × 10{sup 18}/cm{sup 3}. The three orders of magnitude higher carrier concentration produced in films with 22 at. % Ag is argued to be due to doping of the Si matrix by the Ag nanoparticles at this concentration, a doping effect previously observed in ErAs in InGaAs. A discussion of this doping effect is presented that is in keeping with the experimental observations though other factors such as particle size effects need further experimental confirmation. Thermal activation energies and grain boundary barrier heights were obtained from resistivity and Hall mobility data. The barrier heights of 0.360, 0.390 and 0.470 eV measured for films with Ag concentrations of 13, 16 and 22 at. % Ag respectively, are quite high compared to those obtained by other methods used for producing polycrystalline Si (10-100 mev) and need to be considerably reduced in order to increase the efficiency of the detectors for which these Ag/n-Si composite films will be used. Thermal annealing of as-deposited films is suggested as one means to accomplish this result.

36 MATERIALS SCIENCE↗

Steady-state and transient photoconductivity in c-axis GaN nanowires grown by nitrogen-plasma-assisted molecular beam epitaxy

Analysis of steady-state and transient photoconductivity measurements at room temperature performed on c-axis oriented GaN nanowires yielded estimates of free carrier concentration, drift mobility, surface band bending, and surface capture coefficient for electrons. Samples grown (unintentionally n-type) by nitrogen-plasma-assisted molecular beam epitaxy primarily from two separate growth runs were examined. The results revealed carrier concentration in the range of (3-6)x10{sup 16} cm{sup -3} for one growth run, roughly 5x10{sup 14}-1x10{sup 15} cm{sup -3} for the second, and drift mobility in the range of 500-700 cm{sup 2}/(V s) for both. Nanowires were dispersed onto insulating substrates and contacted forming single-wire, two-terminal structures with typical electrode gaps of {approx_equal}3-5 {mu}m. When biased at 1 V bias and illuminated at 360 nm (3.6 mW/cm{sup 2}) the thinner ({approx_equal}100 nm diameter) nanowires with the higher background doping showed an abrupt increase in photocurrent from 5 pA (noise level) to 0.1-1 {mu}A. Under the same conditions, thicker (151-320 nm) nanowires showed roughly ten times more photocurrent, with dark currents ranging from 2 nA to 1 {mu}A. With the light blocked, the dark current was restored in a few minutes for the thinner samples and an hour or more for the thicker ones. The samples with lower carrier concentration showed similar trends. Excitation in the 360-550 nm range produced substantially weaker photocurrent with comparable decay rates. Nanowire photoconductivity arises from a reduction in the depletion layer via photogenerated holes drifting to the surface and compensating ionized surface acceptors. Simulations yielded (dark) surface band bending in the vicinity of 0.2-0.3 V and capture coefficient in the range of 10{sup -23}-10{sup -19} cm{sup 2}. Atomic layer deposition (ALD) was used to conformally deposit {approx_equal}10 nm of Al{sub 2}O{sub 3} on several devices. Photoconductivity, persistent photoconductivity, and subgap photoconductivity of the coated nanowires were increased in all cases. TaN ALD coatings showed a reduced effect compared to the Al{sub 2}O{sub 3} coated samples.

36 MATERIALS SCIENCE↗

Perovskite CsPbBr 3 Single Crystal Detector for Alpha-Particle Spectroscopy.

Here we report the first spectroscopic alpha particle detection based on CsPbBr 3 detectors with asymmetric contacts. The CsPbBr 3 single crystal was grown from melt using Bridgman method and then fabricated into detectors with different contacts. The In/CsPbBr 3 /Au detector presented a low dark current (~100 nA/cm 2 ) and temporal stable performance under high electric field (1000 V/cm). Such detector demonstrated excellent gamma ray resolving capability with a full-width at half maximum (FWHM) of ~5.9 keV for the 57 Co 122 keV γ ray. The CsPbBr 3 detector was capable of simultaneously resolving both the alpha particle (5.5 MeV) and γ ray (59.5 keV) peaks from 241 Am radiative isotope. The transport properties of CsPbBr 3 were then determined based on the alpha particle spectra and corresponding rise time distributions. The equivalent values of electron and hole mobilities were indicated as 63 and 49 cm 2 /(V∙s) respectively. The calculated electron and hole mobility-lifetime products were 4.5 x 10 -4 and 9.5 x 10 -4 cm 2 /V, respectively, demonstrating superior transport properties of holes over electrons in CsPbBr 3 . As a result, this work widens the scope of perovskite detectors to encompass charged radiation as well as high energy X/γ rays, and will significantly promote and guide further studies on perovskite materials for radiation detection applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fundamental space radiobiology

The unique feature of the space radiation environment is the dominance of high-energy charged particles (HZE or high LET radiation) emitted by the Sun and galactic sources, or trapped in the Van Allen radiation belts. These charged particles present a significant hazard to space flight crews, and accelerator-based experiments are underway to quantify the health risks due to unavoidable radiation exposure. There are three principal properties of charged particles that distinguish them from conventional radiation, i.e. gamma rays and x-rays. First, they have a defined range in matter rather than an exponential absorption profile. Second, they undergo nuclear reactions to produce secondary particles. Third, and most important, they deposit their energy along well-defined linear paths or tracks rather than diffuse fields. The structured energy deposition pattern interacts on multiple scales with the biological structures of DNA, cells and tissues to produce correlated patterns of damage that evade repair systems. Traditional concepts of dose and its associated normalization parameter, RBE (relative biological effectiveness), break down under experimental scrutiny, and probabilistic models of risk based on the number of particle traversals per cell may be more appropriate. Unique patterns of DNA damage, gene expression, mobilization of repair proteins, activation of cytokines and remodeling of cellular microenvironment are observed following exposure to high LET radiation. At low levels of exposure the communication of bioactive substances from irradiated to unirradiated "bystander" cells can amplify the damage and cause a significant deviation from linearity in dose vs. response relations. Under some circumstances, there is even a multigenerational delay in the expression of radiation-induced genetic damage (genomic instability) which is not strictly dose dependent. These issues and the experimental evidence derived from ground based experiments at particle accelerators are presented along with speculation about how modified inertial conditions might perturb homeostatic responses to radiation to further complicate risk assessment for space flight.

NASA Discipline Radiation Health↗

A novel approach for reducing toxic emissions during high temperature processing of electronic waste

Highlights: • Volatile heavy metals are generally present in electronic waste constituents. • Potentially toxic elements released during e-waste heat treatment. • Metal particulates/fumes in outgoing gases were removed by alumina adsorbent. • Pb, Sn, Cu and Zn particulates were successfully captured by alumina. •Toxicity of emissions from e-waste was reduced significantly in this approach. - Abstract: A novel approach is presented to capture some of the potentially toxic elements (PTEs), other particulates and emissions during the heat treatment of e-waste using alumina adsorbents. Waste PCBs from mobile phones were mechanically crushed to sizes less than 1 mm; their thermal degradation was investigated using thermo-gravimetric analysis. Observed weight loss was attributed to the degradation of polymers and the vaporization of organic constituents and volatile metals. The sample assembly containing PCB powder and adsorbent was heat treated at 600 °C for times ranging between 10 and 30 min with air, nitrogen and argon as carrier gases. Weight gains up to ∼17% were recorded in the adsorbent thereby indicating the capture of significant amounts of particulates. The highest level of adsorption was observed in N{sub 2} atmosphere for small particle sizes of alumina. SEM/EDS results on the adsorbent indicated the presence of Cu, Pb, Si, Mg and C. These studies were supplemented with ICP-OES analysis to determine the extent of various species captured as a function of operating parameters. This innovative, low-cost approach has the potential for utilization in the informal sector and/or developing countries, and could play a significant role in reducing toxic emissions from e-waste processing towards environmentally safe limits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature measurements of a Martian local dust storm

A technique for estimating the ground and near-ground atmospheric temperatures within a Martian local dust storm is presented. It is applied to soundings taken by the Viking orbiter infrared thermal mapper (IRTM) instrument at four times-of-day for one storm. Essentially, a comparison is made between infrared radiances emerging from the storm interior and those from the region surrounding the storm. Particle extinction properties are assumed to be independent of position in the storm region, and scattering properties must be selected arbitrarily. For the storm studied here, the ground temperature in the interior is at least 6 K cooler, whereas the near-ground atmospheric temperature may be less than or comparable to, those of the surroundings. The thermal structure of the storm interior did not change measurably between 11.5 and 16.6 hours local time. These observations favor the theories of dust storm development in which regional winds rather than local, dust driven convection initiate the mobilization of dust from the surface. It also concluded that the optical properties of dust particles in this local storm differ from those observed by Mariner 9 during the 1971-1972 global dust storm.

Kahn, Ralph↗

Revealing the Intrinsic Li Mobility in the Li 2 MnO 3 Lithium-Excess Material

One of the most promising avenues for future high energy Li-ion batteries originate from the family of Li-rich layered cathodes. However, while exhibiting excellent initial capacity, these materials also suffer from voltage fade, high impedance, and poor rate capability, particularly in the Mn-rich, high Li excess concentration regime. Though it is clear that the Li 2 MnO 3 component contributes to the high capacity as well as the chemical and structural degradation of the material, the inherent ionic conductivity of the material has not been clarified. Here, we investigate the delithiation mechanism, involving coherent Li migration from two layers by first-principles density functional theory. Surprisingly, and contrary to expectations from available experimental results, we find that the pristine material exhibits excellent Li mobility enabling facile Li extraction from both the transition metal layer and Li-layer. Generally, the Li-extractions are highly accelerated by di- and trivacancy clusters, which stabilize the saddle point tetrahedral sites. Hence, we deduce that the observed inferior rate behavior of this class of Li cathode materials is not due to intrinsic poor bulk ionic mobility, but more likely due to surface-passivation, structural deterioration, and/or particle-particle electrode-level transport limitations.

25 ENERGY STORAGE↗

Multivalent Electrochemistry of Spinel Mg x Mn 3– x O 4 Nanocrystals

Oxides undergoing reversible electrochemical cycling of Mg 2+ ions would enable novel battery concepts beyond Li + , capable of storing large amounts of energy. However, materials showing this chemical reactivity are scarce. Suitable candidates require small particles to shorten transport lengths, together with chemically complex structures that promote cation mobility, such as spinel. These goals pose a challenge for materials chemists. Here, nanocrystals of spinel-type Mg 0.5 Mn 2.5 O 4 were prepared using colloidal synthesis, and their electrochemical activity is presented. Cycling in an aqueous Mg 2+ electrolyte led to a reversible transformation between a reduced spinel and an oxidized layered framework. This reaction involves large amounts of capacity because of the full oxidation to Mn 4+ , through the extraction of both Mg 2+ and, in the first cycle, Mn 2+ ions. Re-formation of the spinel upon reduction resulted in enrichment with Mg 2+ , indicating that its insertion is more favorable than that of Mn 2+ . Incorporation of water into the structure was not indispensable for the transformation, as revealed by experiments in non-aqueous electrolytes and infrared spectroscopy. Lastly, the findings open the door for the use of similar nanocrystals in Mg batteries provided that electrolytes with suitable anodic stability are discovered, thereby identifying novel routes toward electrode materials for batteries with high energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical, Chemical, and Petrological Characteristics of Chondritic Materials and Their Relationships to Small Solar System Bodies: Chapter - 2

Chondrite materials with varying abundances of volatile-bearing phases are expected at the destinations for the asteroid sample-return missions Hayabusa2 and OSIRIS-REx. The targets of the missions are 162173 (1999 JU3) Ryugu and 101955 (1999 RQ36) Bennu. Spectroscopic analyses of these asteroids suggest that their surface materials are related to types 1 and 2 carbonaceous chondrites. Some studies suggest that the parent bodies of these chondrites may have also experienced some thermal and/or shock metamorphism. The physical properties of boulders at asteroid surfaces and fine particles in asteroid regoliths are consequences of the diverse processes that fragmented them, mobilized them, and redeposited them in unique accumulations. Sample-return missions are likely to encounter a broad range of carbonaceous chondrite (CC)-like materials, to which aqueous alteration, thermal, and shock metamorphism imparted changes affecting their sub-micron- to meter-scale physical properties. Consequently, implementation of scale-dependent analytical techniques to the study of the chemical, physical, and geotechnical characteristics of these CC-like materials is fundamental to safe mission operations, sample selection, and return. However, most of the available knowledge for informing and formulating expectations about regolith processes, products, and properties on carbonaceous small bodies comes from missions that studied anhydrous (e.g., Itokawa studied by Hayabusa) and/or much larger asteroids (e.g., Vesta studied by Dawn). No previous mission is likely directly relevant to small ice-free carbonaceous NEOs 162173 Ryugu or 101955 Bennu, although the Rosetta Spaceraft performed a flyby of the large asteroid Lutetia which has variously been classified as M and C type (Pätzold et al., 2011). Carbonaceous chondrites carry the best record of the history, distribution, and activity of water in the early solar system. Ordinary and Enstatite chondrites carry only partial records, but these are still critical to understanding the full story. We will describe the records of water-rock interactions on asteroids, as recorded in these meteorites, with particular emphasis on the timing, nature, settings, and fluid compositions. An integral part of this story is the rare, but fortunate, preservation of actual early solar system water as aqueous fluid inclusions.

Zolensky, Michael E.↗

Controlled combustion tests and bottom ash analysis using household waste with varying composition

The influence of the co-combustion of household waste with either sewage sludge, shredder fluff, electronic and electrical waste (WEEE) or PVC on the bottom ash quality and content was investigated under controlled laboratory conditions using a pot furnace. This laboratory approach avoids the interpretation problems related to large variations in input waste composition and combustion conditions that are observed in large scale MSW incinerators. The data for metals content, transfer coefficients and leaching values are presented relative to data for a base household waste composition that did not contain any of the added special wastes. The small WEEE invited direct measurement of precious metals content in the ashes, where measurement accuracy is facilitated by using only mobile phone scrap for small WEEE. The analyses were carried out for different particle size ranges that are of relevance to the recyclability of metals and minerals in the ashes. Positive correlations were found between elements content of the input waste and the bottom ashes, and also between increased levels of Cl, Mo and Cu in the input waste and their leaching in the bottom ashes. These correlations indicate that addition of PVC, small WEEE and shredder fluff in input waste can have a negative influence on the quality of the bottom ashes. Enrichment of Au and Ag occurred in the fractions between 0.15 and 6 mm. The precious metals content represents an economically interesting intrinsic value, even when the observed peak values are properly averaged over a larger volume of ashes. Overall, it has been shown that changes in quality and content of bottom ashes may be traced back to the varied input waste composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energetics of intrinsic defects and their complexes in ZnO investigated by density functional calculations

Formation energies of various intrinsic defects and defect complexes in ZnO have been calculated using a density-functional-theory-based pseudopotential all-electron method. The various defects considered are oxygen vacancy (V{sub O}), zinc vacancy (V{sub Zn}), oxygen at an interstitial site (O{sub i}), Zn at an interstitial site (Zn{sub i}), Zn at V{sub O} (Zn{sub O}), O at V{sub Zn}(O{sub Zn}), and an antisite pair (combination of the preceding two defects). In addition, defect complexes like (V{sub O}+Zn{sub i}) and Zn-vacancy clusters are studied. The Schokkty pair (V{sub O}+V{sub Zn}) and Frenkel pairs [(V{sub O}+O{sub i}) and (V{sub Zn}+Zn{sub i})] are considered theoretically for the first time. Upon comparing the formation energies of these defects, we find that V{sub O} would be the dominant intrinsic defect under both Zn-rich and O-rich conditions and it is a deep double donor. Both Zn{sub O} and Zn{sub i} are found to be shallow donors. The low formation energy of donor-type intrinsic defects could lead to difficulty in achieving p-type conductivity in ZnO. Defect complexes have charge transitions deep inside the band gap. The red, yellow, and green photoluminescence peaks of undoped samples can be assigned to some of the defect complexes considered. It is believed that the red luminescence originates from an electronic transition in V{sub O}, but we find that it can originate from the antisite Zn{sub O} defect. Charge density and electron-localization function analyses have been used to understand the effect of these defects on the ZnO lattice. The electronic structure of ZnO with intrinsic defects has been studied using density-of-states and electronic band structure plots. The acceptor levels introduced by V{sub Zn} are relatively localized, making it difficult to achieve p-type conductivity with sufficient hole mobility.

36 MATERIALS SCIENCE↗

Bipolar transport in diamond under photo-excitation: Evidence of free charge scattering by excitons

The fundamental characteristics of the Coulomb e-h interactions in ultra-pure diamond are investigated through time-resolved photoconductivity measurements in homogeneously photoexcited samples with ohmic-like low resistive B + sandwich contacts. Here, we demonstrate that, in the electric field, the bipolar charge mobility exhibits drastic reduction for photo-injected densities of 10 14 ‐10 16 cm ‐3 that cannot be explained only by mutual scattering between free e-h particles. This phenomenon is clarified by adding scattering caused by excitons whose density grows in the photo-exited system. The comparison of drift mobilities at 300 K in diamond obtained in this study and in pure Si and Ge obtained from literature, where exciton scattering is insignificant, is presented. We derive the empirical expression for the density dependences of bipolar mobility for the electric fields up to 1 kV/cm that could be useful for the development of diamond electronic devices.

Bipolar drift↗

Space-Borne Electron Accelerator Design

Renewed interest in active experiments with relativistic particle beams in space has led to the development of solid-state radio-frequency (RF) linear accelerators (linac) that can deliver MeV electron beams but operate with low-voltage DC power supplies. The solid-state RF amplifiers used to drive the accelerator are known as high-electron mobility transistors (HEMTs), and at C-band (5–6 GHz) are capable of generating up to 500 watts of RF power at 10% duty factor in a small package, i.e., the size of a postage stamp. In operation, the HEMTs are powered with 50 V DC as their bias voltage; they thus can tap into the spacecraft batteries or electrical bus as the primary power source. In this paper we describe the initial testing of a compact space-borne RF accelerator consisting of individual C-band cavities, each independently powered by a gallium nitride (GaN) HEMT. We show preliminary test results that demonstrate the beam acceleration in a single C-band cavity powered by a single HEMT operating at 10% duty factor. An example of active beam experiments in space that could benefit from the HEMT-powered accelerators is the proposed Magnetosphere-Ionosphere Connection (CONNEX) experiment (Dors et al., 2017).

43 PARTICLE ACCELERATORS↗

Local Equilibrium and Retardation Revisited

We present that in modeling solute transport with mobile-immobile mass transfer (MIMT), it is common to use an advection-dispersion equation (ADE) with a retardation factor, or retarded ADE. This is commonly referred to as making the local equilibrium assumption (LEA). Assuming local equilibrium, Eulerian textbook treatments derive the retarded ADE, ostensibly exactly. However, other authors have presented rigorous mathematical derivations of the dispersive effect of MIMT, applicable even in the case of arbitrarily fast mass transfer. We resolve the apparent contradiction between these seemingly exact derivations by adopting a Lagrangian point of view. We show that local equilibrium constrains the expected time immobile, whereas the retarded ADE actually embeds a stronger, nonphysical, constraint: that all particles spend the same amount of every time increment immobile. Eulerian derivations of the retarded ADE thus silently commit the gambler's fallacy, leading them to ignore dispersion due to mass transfer that is correctly modeled by other approaches. We then present a particle tracking simulation illustrating how poor an approximation the retarded ADE may be, even when mobile and immobile plumes are continually near local equilibrium. Finally, we note that classic “LEA” (actually, retarded ADE validity) criteria test for insignificance of MIMT-driven dispersion relative to hydrodynamic dispersion, rather than for local equilibrium.

58 GEOSCIENCES↗

Mobilities of polydisperse hard spheres near a no-slip wall

In the article, we have derived an analytical formulation for far-field hydrodynamic interactions among unequal size hard spheres near a no-slip wall and have implemented the formulation in a Stokesian dynamics model to simulate a suspension of polydisperse particles in a semi-bounded domain. The formulation is based on the multipole expansion of the boundary integral of Stokes flow, and the mobility tensors are deduced from Fáxen’s law together with Green’s function for Stokes flow near a no-slip wall. Lubrication approximation is incorporated to account for the close-distance interactions between any two particles and also between the particles and the wall. The implementation is validated against previous formulations for equal size particles and against a boundary-element code for unequal size particles. The code can be used to simulate the Stokesian or Brownian interaction of unequal particles in presence of a no-slip wall. In the current study, we applied the Stokesian dynamics model to investigate the trajectories of two unequal hard spheres and their redistribution during sedimentation parallel to a wall. We further used it to demonstrate the cases of many-particle sedimentation toward or parallel to a wall.

catalysis (heterogeneous)↗

Characterizing Wheel-Soil Interaction Loads Using Meshfree Finite Element Methods: A Sensitivity Analysis for Design Trade Studies

A wheel experiencing sinkage and slippage events poses a high risk to planetary rover missions as evidenced by the mobility challenges endured by the Mars Exploration Rover (MER) project. Current wheel design practice utilizes loads derived from a series of events in the life cycle of the rover which do not include (1) failure metrics related to wheel sinkage and slippage and (2) performance trade-offs based on grouser placement/orientation. Wheel designs are rigorously tested experimentally through a variety of drive scenarios and simulated soil environments; however, a robust simulation capability is still in development due to myriad of complex interaction phenomena that contribute to wheel sinkage and slippage conditions such as soil composition, large deformation soil behavior, wheel geometry, nonlinear contact forces, terrain irregularity, etc. For the purposes of modeling wheel sinkage and slippage at an engineering scale, meshfree nite element approaches enable simulations that capture su cient detail of wheel-soil interaction while remaining computationally feasible. This study implements the JPL wheel-soil benchmark problem in the commercial code environment utilizing the large deformation modeling capability of Smooth Particle Hydrodynamics (SPH) meshfree methods. The nominal, benchmark wheel-soil interaction model that produces numerically stable and physically realistic results is presented and simulations are shown for both wheel traverse and wheel sinkage cases. A sensitivity analysis developing the capability and framework for future ight applications is conducted to illustrate the importance of perturbations to critical material properties and parameters. Implementation of the proposed soil-wheel interaction simulation capability and associated sensitivity framework has the potential to reduce experimentation cost and improve the early stage wheel design proce

terramechanics↗

Affinity Electrophoresis Using Ligands Attached To Polymers

In new technique, reduction of electrophoretic mobilities by addition of polyethylene glycol to ligands increases electrophoretic separabilities. In immuno-affinity electrophoresis, modification of ligands extends specificity of electrophoretic separation to particles having surface electric-charge structures otherwise making them electrophoretically inseparable. Modification of antibodies by polyethylene glycol greatly reduces ability to aggregate while enhancing ability to affect electrophoretic mobilities of cells. In hydrophobic-affinity electrophoresis, addition of polyethylene glycol reduces tendency toward aggregation of cells or macromolecules.

Van Alstine, James M.↗

Particle Size Distributions Measured in the B757 Engine Plume During EXCAVATE

The Experiment to Characterize Aircraft Volatile Aerosols and Trace Species Emissions (EXCAVATE) took place at NASA Langley Research Center during January 2002. This ground based study was conducted to examine the role of fuel sulfur content on particulate emissions. Size distributions as a function of engine operating conditions were measured in the exhaust plume of a B-757 at four downstream axial locations (1 m, 10 m, 25 m and 35 m). The engine was run on JP-5 with three different sulfur concentrations, 810 ppm, 1050 ppm, 1820 ppm; and was operated over a range of power settings from idle to near-full power. Zalabsky differential-mobility analyzers DMAS), Met One condensation-nuclei counters (CNCs), and a TSI 3022 condensation-particle counter (CPC) were used to measure the size distributions. The total number-count (particle concentration), number-based Emissions Index (EInumber) and mass-based Emissions Index (E1-J increased with fuel sulfur-content and engine pressure ratio (EPR). Count Mean Diameter (Ch4D) also increased with EPR yet remained fairly constant with fuel sulfur-content for a fixed location in the exhaust plume. Also the mode and CMD both increased with distance in the plume.

Sanders, Terry↗