SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The drilling of deep holes by means of gun drills is investigated so as to establish the parameters of the guide hole and its production. The rate of change in the load on the tool is proportional to the active length of the primary cutting edge. Assessment of the smoothness of tool insertion on the basis of the rate of change in the load on the tool is proposed.
A wave energy converter must be designed to survive and function efficiently, often in highly energetic ocean environments. This represents a challenging engineering problem, comprising systematic failure mode analysis, environmental characterization, modeling, experimental testing, fatigue and extreme response analysis. While, when compared with other ocean systems such as ships and offshore platforms, there is relatively little experience in wave energy converter design, a great deal of recent work has been done within these various areas. Here, this article summarizes the general stages and workflow for wave energy converter design, relying on supporting articles to provide insight. By surveying published work on wave energy converter survival and design response analyses, this paper seeks to provide the reader with an understanding of the different components of this process and the range of methodologies that can be brought to bear. In this way, the reader is provided with a large set of tools to perform design response analyses on wave energy converters.
Interferon (IFN) cytokines induce an autonomous antiviral state in cells of the infected site to restrict virus spreading and critically regulate overall antiviral response. The antiviral state leads to host protection through expression of hundreds of IFN-stimulated genes that restrict viral infection through multiple mechanisms, for example, directly in viral genome degradation and indirectly through cellular metabolic inhibition. Young pigs were split into four treatment groups: control, porcine reproductive and respiratory syndrome virus (PRRSV, also known as porcine arterivirus) infected, influenza B virus (IBV) infected, and IBV/PRRSV coinfection. Lung tissue was collected at 3, 5, and 7 days post infection (dpi) for control, PRRSV and IBV/PRRSV coinfection, and at 3 and 5 dpi for IBV. Transcriptomic analysis, using usegalaxy.org tools, was performed against the S.scrofa 11.1 reference genome. Differentially expressed gene (DEG) analysis was carried out using DeSeq2 based on the model treatment + dpi + treatment:dpi + E. Downstream analysis examined the interaction of DEG at each dpi for over-enriched gene ontology (G.O.) terms and pathways. Comparisons of the infected groups vs. the controls yielded a total of (n = 1412) DEGs for the PRRSV group and (n = 1578) for the IBV/PRRSV group across all timepoints. The IBV group had (n = 64) total DEGs across 3 and 5 dpi. Expression data were considered statistically significant based on false discovery rate (FDR) ⫹ 0.1. Venn diagram comparisons of the DEGs across dpi showed that groups shared only 16 DEGs at 3 dpi, no DEGs were shared at 5 dpi, and for 7 dpi, only the PRRSV and IBV/PRRSV groups were compared and shared a total of 43 DEGs. Across the comparisons, differential expression was observed in antiviral genes such as IRF1, MX1, and OAS2. The IBV and IBV/PRRSV groups showed higher expression of antiviral genes at earlier dpi than the PRRSV group. Additionally, downregulated genes from the comparisons clustered around Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways effecting lung development and cellular integrity. Early expression of host IFN and antiviral genes may lead to viral RNA degradation, and assembly and transcription inhibition in the IBV infections. In comparison, expression of antiviral genes in the PRRSV group decreased across time. The decrease may explain why PRRSV infections persist, while IBV clears. Moreover, all infected groups showed prolonged upregulation in neutrophil degranulation pathway activity, possibly exacerbating symptomatic lung lesion pathology seen in these respiratory infections.
The role of auxin in plant–microbe interaction has primarily been studied using indole-3-acetic acid (IAA)-producing pathogenic or plant-growth-promoting bacteria. However, the IAA biosynthesis pathway in bacteria involves indole-related compounds (IRCs) and intermediates with less known functions. Here, we seek to understand changes in plant response to multiple plant-associated bacteria taxa and strains that differ in their ability to produce IRCs. We had previously studied 47 bacterial strains isolated from several duckweed species and determined that 79% of these strains produced IRCs in culture, such as IAA, indole lactic acid (ILA), and indole. Using Arabidopsis thaliana as our model plant with excellent genetic tools, we performed binary association assays on a subset of these strains to evaluate morphological responses in the plant host and the mode of bacterial colonization. Of the 21 tested strains, only four high-quantity IAA-producing Microbacterium strains caused an auxin root phenotype. Compared to the commonly used colorimetric Salkowski assay, auxin concentration determined by LC–MS was a superior indicator of a bacteria’s ability to cause an auxin root phenotype. Studies with the auxin response mutant axr1-3 provided further genetic support for the role of auxin signaling in mediating the root morphology response to IAA-producing bacteria strains. Interestingly, our microscopy results also revealed new evidence for the role of the conserved AXR1 gene in endophytic colonization of IAA-producing Azospirillum baldaniorum Sp245 via the guard cells.
Demeter is an open source Python package that was built to disaggregate projections of future land allocations generated by an integrated assessment model (IAM). Projected land allocation from IAMs is traditionally transferred to Earth System Models (ESMs) in a variety of gridded formats and spatial resolutions as inputs for simulating biophysical and biogeochemical fluxes. Existing tools for performing this translation generally require a number of manual steps which introduces error and is inefficient. Demeter makes this process seamless and repeatable by providing gridded and land cover change (LULCC) products derived directly from an IAM—in this case, the Global Change Assessment Model (GCAM)—in a variety of formats and resolutions commonly used by ESMs. Demeter is publicly available via GitHub and has an extensible output module allowing for future ESM needs to be easily accommodated.
An artwork interactive design system is described which provides the microelectronic circuit designer/engineer a tool to perform circuit design, automatic layout modification, standard cell design, and artwork verification at a graphics computer terminal using a graphics tablet at the designer/computer interface.
A substantially modified version of the NASA-Lewis Chemical Equilibrium Code was recently developed. The modifications were designed to extend the power and convenience of the Code as a tool for performing combustor analysis for MHD systems studies. The effect of the programming details is described from a user point of view.
A theory is presented for deducing and predicting the performance of transmitter/receivers for bandwidth efficient modulations suitable for use on the linear satellite channel. The underlying principle used is the development of receiver structures based on the maximum-likelihood decision rule. The application of the performance prediction tools, e.g., channel cutoff rate and bit error probability transfer function bounds to these modulation/demodulation techniques.
Computer aided engineering systems are invaluable tools in performing NASTRAN finite element analysis. These techniques are implemented in both the pre-processing and post-processing phases of the NASTRAN analysis. The finite element model development, or pre-processing phase, was automated with a computer aided modeling program called Supertabl, and the review and interpretation of the results of the NASTRAN analysis, or post-processing phase, was automated with a computer aided plotting program called Output Display. An intermediate program, Nasplot, which was developed in-house, has also helped to cut down on the model checkout time and reduce errors in the model. An interface has been established between the finite element computer aided engineering system and the Learjet computer aided design system whereby data can be transferred back and forth between the two. These systems have significantly improved productivity and the ability to perform NASTRAN analysis in response to product development requests.
The role of formal verification techniques in system validation was examined. The value and the state of the art of performance proving for fault-tolerant compuers were assessed. The investigation, development, and evaluation of performance proving tools were reviewed. The technical issues related to proof methodologies are examined. The technical issues discussed are summarized.
The research issues associated with the increasing autonomy and independence of machines and their evolving relationships to human beings are explored. The research, conducted by Langley Research Center (LaRC), will produce a new social work order in which the complementary attributes of robots and human beings, which include robots' greater strength and precision and humans' greater physical and intellectual dexterity, are necessary for systems of cooperation. Attention is given to the tools for performing the research, including the Intelligent Systems Research Laboratory (ISRL) and industrial manipulators, as well as to the research approaches taken by the Automation Technology Branch (ATB) of LaRC to achieve high automation levels. The ATB is focusing on artificial intelligence research through DAISIE, a system which tends to organize its environment into hierarchical controller/planner abstractions.
An approximate method is developed for estimating the transient response of nonlinear systems in terms of linearized modes of response. Its advantages are that it is computationally more efficient than the time integration method and that it is possible to view the design problem in the more traditional physical terms of modal response. The major drawback of the approximate method is loss of accuracy. It seems that both approximate methods and time integration have their roles in design. Approximate methods provide efficient tools for performing parametric studies and they supply physical insights into how to optimize system performance that are not easily inferred from strictly numerical methods. Time integration provides a method for assessing the accuracy of the approximate solution for key simulations and for fine tuning the final design. In the procedure presented the nonlinear system is approximated by an equivalent linear system in which the system parameters are constant over the range of transient response.
The vortex unwinding method is used as a tool in performing vortex cancellation in a turbulent boundary layer. Sufficient reduction in the isotach variation was achieved to verify the usefulness of this technique, for the cases of both wall turbulence control and horseshoe vortex alleviation. More detailed measurements of vortex strength and position improve the optimization process and increase the amount of vortex unwinding.
This report covers the design, fabrication, and test of several dual slot heat pipe engineering development units. The following dual-slot heat pipes were fabricated and tested: two 6-ft. aluminum heat pipes; a 20-ft. aluminum heat pipe; and a 20-ft. aluminum heat pipe with a four-leg evaporator section. The test results of all four test articles are presented and compared to the performance predicted by the design software. Test results from the four-leg article are incomplete. The methodology for fabricating stainless steel dual slot heat pipes was also studied by performing a tool life test with different single point cutters, and these results are also presented. Although the dual-slot heat pipe has demonstrated the potential to meet the requirements for a high capacity radiator system, uncertainties with the design still exist. The startup difficulties with the aluminum test articles must be solved, and a stainless steel/methanol heat pipe should be built and tested.
Extravehicular activity (EVA) is crucial to the success of both current and future space operations. As space operations have evolved in complexity so has the demand placed on the EVA crewman. In addition, some NASA requirements for human capabilities at remote or hazardous sites were identified. One of the keys to performing useful EVA tasks is the ability to manipulate objects accurately, quickly and without early or excessive fatigue. The current suit employs a glove which enables the crewman to perform grasping tasks, use tools, turn switches, and perform other tasks for short periods of time. However, the glove's bulk and resistance to motion ultimately causes fatigue. Due to this limitation it may not be possible to meet the productivity requirements that will be placed on the EVA crewman of the future with the current or developmental Extravehicular Mobility Unit (EMU) hardware. In addition, this hardware will not meet the requirements for remote or hazardous operations. In an effort to develop ways for improving crew productivity, a contract was awarded to develop a prototype anthromorphic robotic hand (ARH) for use with an extravehicular space suit. The first step in this program was to perform a a design study which investigated the basic technology required for the development of an ARH to enhance crew performance and productivity. The design study phase of the contract and some additional development work is summarized.
Three dimensional, unsteady, multizoned fluid dynamics simulations over full scale aircraft is typical of problems being computed at NASA-Ames on CRAY2 and CRAY-YMP supercomputers. With multiple processor workstations available in the 10 to 30 Mflop range, it is felt that these new developments in scientific computing warrant a new approach to the design and implementation of analysis tools. These large, more complex problems create a need for new visualization techniques not possible with the existing software or systems available as of this time. These visualization techniques will change as the supercomputing environment, and hence the scientific methods used, evolve ever further. Visualization of computational aerodynamics require flexible, extensible, and adaptable software tools for performing analysis tasks. FAST (Flow Analysis Software Toolkit), an implementation of a software system for fluid mechanics analysis that is based on this approach is discussed.
Attention is given to such topics as an evaluation of block algorithm variants in LAPACK and presents a large-grain parallel sparse system solver, a multiprocessor method for the solution of the generalized Eigenvalue problem on an interval, and a parallel QR algorithm for iterative subspace methods on the CM2. A discussion of numerical methods includes the topics of asynchronous numerical solutions of PDEs on parallel computers, parallel homotopy curve tracking on a hypercube, and solving Navier-Stokes equations on the Cedar Multi-Cluster system. A section on differential equations includes a discussion of a six-color procedure for the parallel solution of elliptic systems using the finite quadtree structure, data parallel algorithms for the finite element method, and domain decomposition methods in aerodynamics. Topics dealing with massively parallel computing include hypercube vs. 2-dimensional meshes and massively parallel computation of conservation laws. Performance and tools are also discussed.
The design and implementation of a real-time programming language called Flex, which is a derivative of C++, are presented. It is shown how different types of timing requirements might be expressed and enforced in Flex, how they might be fulfilled in a flexible way using different program models, and how the programming environment can help in making binding and scheduling decisions. The timing constraint primitives in Flex are easy to use yet powerful enough to define both independent and relative timing constraints. Program models like imprecise computation and performance polymorphism can carry out flexible real-time programs. In addition, programmers can use a performance measurement tool that produces statistically correct timing models to predict the expected execution time of a program and to help make binding decisions. A real-time programming environment is also presented.