Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Non-equilibrium phase distribution in an Al-SiC composite

The phase distribution in an Al-SiC composite has been investigated using high resolution analytical electron microscopy. Particular attention was focused on Al-SiC interfaces, matrix boundaries and impurity phases which would impede the easy glide of dislocations. Small crystallites of MgO were distributed singly and in clusters along Al-SiC interfaces in all specimens. Interfacial segregation and precipitation involving alloy species apparently affected precipitation in the matrix, where the distribution of phases was found to be very heterogeneous. Matrix phases also included unusually large constituent particles and dispersoids, a consequence of the composite processing methods. The relationship between the observed microstructure and the composite mechanical behavior reported by others is discussed. The heterogeneous distribution of matrix phases is expected to result in a wide variaiton in local yield stress and local work-hardening rate within the composite.

Nutt, S. R.↗
NASA NTRS1985

The super-hot thermal component in the decay phase of solar flares

Solar X-ray observations from balloons and from the SMM and Hinotori spacecraft have revealed evidence for a superhot thermal component with a temperature of more than about 3 x 10 to the 7th K in many solar flares, in addition to the usual 10-20 x 10 to the 6th K soft X-ray flare plasma. The decay phase of 35 solar flare X-ray events observed by ISEE-3 during 1980 was systematically studied. Based on fits to the continuum X-ray spectrum in the 4.8-14 keV range and to the intensity of the 1.9 A feature of iron lines, it was found that 15 (about 43) of the analyzed events have a superhot thermla component in the decay phase of the flare. In this paper, the important properties of the superhot thermal component in the decay phase are summarized. It is found that an additional input of energy is required to maintain the superhot thermal components. Finally, it is suggested that the superhot thermal component in the decay phase is created through the reconnection of the magnetic field during the decay phase of solar flares.

Lin, H.-A.↗
NASA NTRS1985

Radio phase characteristics of terrain from multipolarized synthetic aperture radar data

Recent advances in digital data acquisition and signal processing technology permit simultaneous measurement of the complex (amplitude and phase) radar backscatter from several polarization-diverse antennas. While absolute phase mesurements remain to be analyzed in detail. The differential phase of signals polarized parallel and perpendicular to the plane of incidence provide information on the scattering mechanisms that dominate the interaction of the radio waves with the terrain. Analysis of phase backscatter maps from a typical urban area yields a bimodal distribution with the two peaks separated by approximately 180 degrees, highly indicative of a dominant simple geometric one bounce-two bounce mechanism. Some maps of agricultural areas exhibit a similar distribution, however, other agricultural areas yield a distribution that, while still bimodal, consists of two peaks separated by about 110 deg. Still other agricultural areas exhibit a more complex distribution. All of the observed phase shifts appear to be independent of incidence angle from at least 20 deg to 55 deg, therefore the 110 degree shifts are inconsistent with both the geometric model used for the urban area and with common dielectric slab models.

Zebker, H. A.↗
NASA NTRS1986

The wavelength dependence of phase coefficients

It is pointed out that spectral reflectance curves depend largely upon the optical constants of the surface materials. In the present study, the results of laboratory measurements are employed to investigate the wavelength dependence of disk-integrated phase coefficients of some materials, taking into account a basalt, the ordinary chondrite Bruderheim, the carbonaceous chondrite Allende, and sulfur. These materials have been selected as appropriate analogs to the surfaces of the moon, S- and C-class asteroids, and the Jovian satellite Io, respectively. It is shown that the observed wavelength dependence of phase coefficients can be predicted (at least qualitatively) once the spectrum of an object is known. Attention is given to phase variation of disk-integrated spectral reflectance curves, the wavelength dependence of phase coefficients, a comparison with observations, and the effects of surface roughness on phase coefficients.

Gradie, J.↗
NASA NTRS1986

Visible phase curves of Uranus and Neptune and scattering in their atmospheres

The Voyager 1 and Voyager 2 narrow angle cameras have been imaging Uranus and Neptune (through several filters) from distances of several AU for the past four years. The justification for this is to determine the way in which the albedoes of the two planets vary with angle from the sun. The Voyager 1 spacecraft has already reached a phase angle of approx. 40 deg. for Neptune and approx. 70 deg. for Uranus. The albedo of a gaseous planet depends on the phase angle (angle from the sun through the planet to the observer), the color being observed, and the vertical distribution and nature of aerosols and clouds in the atmosphere of the planet. Since the colors are known and the phase angles, and phase curves will be used to constrain models of the aerosol and cloud structrures of Uranus and Neptune. A knowledge of the way albedo varies with phase angle allows one to compute the total amount of sunlight being absorbed by a planet. With knowledge of the solar flux incident on the planet and knowledge of how much infrared is being emitted by the planet (at least in the direction of the Earth and sun) one can determine a rough extimate of the internal heat source of the planet. Although Jupiter and Saturn have measured internal heat sources of magnitude comparable to their absorbed energy from the sun, preliminary results indicate that Uranus may not have an internal heat and that Neptune if it has one that heat source is small.

Wenkert, D.↗
NASA NTRS1986

Relationships among the phases

The overall flare process involves phenomena characterized as the impulsive and gradual phases, following the X-ray signature first recognized by Kane (1969). In addition, evidence exists for a pre-flare phase in some flares, and recent Solar Maximum Mission data have shown that a post-flare phase, in which extensive and energetically important coronal activity occurs, may also exist. The data to describe the pre-flare and post-flare phases are insufficient to place them properly into an overall picture of the energetics, aside from noting that these phases may indeed be significant from the energetics point of view. What is presently known is reviewed and comments are made about the possible interactions among the flare structures involved.

Crannell, C. J.↗
NASA NTRS1986

Two-phase flow

An experimental program to characterize the spray from candidate nozzles for icing-cloud simulation is discussed. One canidate nozzle, which is currently used for icing research, has been characterized for flow and drop size. The median-volume diameter (MVD) from this air-assist nozzle is compared with correlations in the literature. The new experimental spray facility is discussed, and the drop-size instruments are discussed in detail. Since there is no absolute standard for drop-size measurements and there are other limitations, such as drop -size range and velocity range, several instruments are used and results are compared. A two-phase model was developed at Pennsylvania State University. The model uses the k-epsilon model of turbulence in the continous phase. Three methods for treating the discrete phase are used: (1) a locally homogeneous flow (LHF) model, (2) a deterministic separated flow (DSF) model, and (3) a stochastic separated flow (SSF) model. In the LHF model both phases have the same velocity and temperature at each point. The DSF model provides interphase transport but ignores the effects of turbulent fluctuations. In the SSF model the drops interact with turbulent eddies whose properties are determined by the k-epsilon turbulence model. The two-phase flow model has been extended to include the effects of evaporation and combustion.

Tacina, Robert R.↗
NASA NTRS1987

Nondestructive ultrasonic characterization of two-phase materials

The development of ultrasonic methods for the nondestructive characterization of mechanical properties of two phase engineering materials are described. The primary goal was to establish relationships between the nonlinearity parameter and the percentage of solid solution phase in two phase systems such as heat treatable aluminum alloys. The acoustoelastic constant was also measured on these alloys. A major advantage of the nonlinearity parameter over that of the acoustoelastic constant is that it may be determined without the application of stress on the material, which makes the method more applicable to inservice nondestructive characterization. The results obtained on the heat treatable 7075 and the work hardenable 5086 and 5456 aluminum alloys show that both the acoustoelastic constant and the acoustic nonlinearity parameter change considerable with the volume fraction of second phase precipitates in these aluminum alloys. A mathematical model was also developed to relate the effective acoustic nonlinearity parameter to volume fraction of second phase precipitates in an alloy. The equation is approximated to within experimental error by a linear expression for volume fractions up to approx. 10%.

Salama, Kamel↗
NASA NTRS1986

Acoustoelastic constants in dilute two-phase alloys

Acoustoelastic constants are calculated for two-phase alloys containing dilute concentrations of precipitates in a solid-solution matrix, on the basis of a model in which the precipitates are represented as a dilute elastic suspension of spherical particle inclusions in an infinite matrix. The longitudinal propagation velocity in the alloy is thereby obtained in terms of the precipitates' concentration and the elastic moduli of the two phases. Results are presented which indicate that the acoustoelastic constant of longitudinal waves in a dilute two-phase alloy varies linearly with the concentration of second-phase precipitates, in agreement with recent measurements in aluminum and steel alloys where the acoustoelastic constants changed linearly with the second phase's volume fraction.

Salama, K.↗
NASA NTRS1987

Phase closure with a rotational shear interferometer

A simple and efficient way is proposed for achieving phase closure in an optical telescope (to enable recovering Fourier transform phases that would otherwise be corrupted by atmospheric and instrumental errors), by means of rotational shear interferometry. In a rotational shear interferometer, one images the telescope aperture onto the interferometer and then interferes the aperture with itself in a rotated orientation. To achieve the maximum frequency content permitted by the telescope, the shear has to be 180 deg, but better dynamic range and SNR are possible for lower frequencies. Drawbacks of the proposed method compared to radio astronomy are noted, and different approaches are indicated as to how to collect and use the phase closure data. Phase closure can be realized on existing telescopes and existing interferometers with special modifications. Although not all base lines are possible, the extra constraints provided by the closure phases greatly reduce the ambiguity now existing in phaseless image reconstruction.

Ribak, Erez↗
NASA NTRS1986

20-GHz phased-array-fed antennas utilizing distributed MMIC modules

The feasibility of phased-array-fed dual-reflector systems with distributed power and phase control, and utilizing monolithic microwave integrated circuit modules, is demonstrated. Secondary radiation patterns for various antenna configurations, calculated using a method in which the phased array for each scanning direction is simulated by a fictitious point source, are computed to determine the achievable EIRP levels, sidelobe isolation, and cross-polarization isolation. The focal-region-fed Cassegrain reflector was found to be best suited for fixed multiple beam applications, while the phased-array-fed dual-reflector configuration was selected for multiple scanning beams. Key elements of the phased-array design including a radiating square horn and a square orthomode transducer were fabricated and tested.

Sorbello, R. M.↗
NASA NTRS1987

Design and test of a mechanically pumped two-phase thermal control flight experiment

A flight experiment of a mechanically pumped two-phase ammonia thermal control system, incorporating a number of new component designs, has been assembled and tested in a 1-g environment. Additional microgravity tests are planned on the Space Shuttle when Shuttle flights are resumed. The primary purpose of this experiment is to evaluate the operation of a mechanically pumped two-phase ammonia system, with emphasis on determining the performance of an evaporative Two-Phase Mounting Plate. The experiment also evaluates the performance of other specially designed components, such as the two-phase reservoir for temperature control, condensing radiator/heat sink, spiral tube boiler, and pressure drop experiment. The 1-g tests have shown that start-up of the two-phase experiment is easily accomplished with only a partial fill of ammonia. The experiment maintained a constant mounting plate temperature without flow rate controls over a very wide range of heat loads, flow rates, inlet flow conditions and exit qualities. The tests also showed the successful operation of the mounting plate in the heat sharing condensing mode.

Grote, M. G.↗
NASA NTRS1987

Optimized tracking of RF carriers with phase noise, including Pioneer 10 results

The ability to track very weak signals from distant spacecraft is limited by the phase instabilities of the received signal and of the local oscillator employed by the receiver. These instabilities ultimately limit the minimum loop bandwidth that can be used in a phase-coherent receiver, and hence limit the ratio of received carrier power to noise spectral density which can be tracked phase coherently. A method is presented for near real time estimation of the received carrier phase and additive noise spectrum, and optimization of the phase locked loop bandwidth. The method was used with the breadboard Deep Space Network (DSN) Advanced Receiver to optimize tracking of very weak signals from the Pioneer 10 spacecraft, which is now more distant that the edge of the solar system. Tracking with bandwidths of 0.1 Hz to 1.0 Hz reduces tracking signal threshold and increases carrier loop signal to noise ratio (SNR) by 5 dB to 15 dB compared to the 3 Hz bandwidth of the receivers now used operationally in the DSN. This will enable the DSN to track Pioneer 10 until its power sources fails near the end of the century.

Vilnrotter, V. A.↗
NASA NTRS1987

Two-phase nickel aluminides

The as-extruded microstructures of two alloys in the two phase field consisting of Ni3Al and NiAl in the Ni-Al phase diagram exhibit fibrous morphology and consist of Ll(2) Ni3Al and B2 NiAl. These as-extruded microstructures can be modified dramatically by suitable heat treatments. Martensite plus NiAl or martensite plus Ni3Al microstructures are obtained upon quenching from 1523 K. Aging of martensite at 873 K results in the recently identified phase Ni5Al, whereas aging at 1123 K reverts the microstructures to Ni3Al plus NiAl. The microstructures with predominantly martensite of Ni5Al3 phases are brittle in tension at room temperature. The latter microstructure does not deform plastically even in compression at room temperature. However, some promise of room temperature tensile ductility is indicated by the Ni3Al plus NiAl phase mixtures.

Khadkikar, P. S.↗
NASA NTRS1988

Computation of two-phase shear-layer flow using an Eulerian-Lagrangian analysis

A combined Eulerian-Lagrangian analysis which combines a linearized block implicit Navier-Stokes analysis for the continuous phase with a Lagrangian analysis for the discrete phase has been utilized to simulate a two-phase shear-layer flow in a two-dimensional channel flow configuration. The motion of the particles is tracked in computational coordinate space, resulting in improved computational efficiency, and interphase coupling terms for the Eulerian analysis are computed from the instantaneous distribution of the particles rather than the trajectory information. The use of the implicit Navier-Stokes analysis for the continuous phase has made it possible to efficiently use a highly stretched mesh. A low Reynolds number form of the k-epsilon turbulence model was used with near-wall resolution, thus eliminating the need to use the 'wall-function' approach. The streamwise velocity profiles for the continuous and the discrete phases have been compared with experimental data for two test cases.

Sabnis, Jayant S.↗
NASA NTRS1988

Demixing of aqueous polymer two-phase systems in low gravity

Experiments on the effect of gravity on phase emulsion demixing were performed in order to study the potential of two-phase partitioning in space. The behavior of phase systems possessing phase density differences and systems with essentially identical phase densities was investigated during one-g and low-g parabolic aircraft maneuvers. It is found that demixing can occur rather rapidly in space, although more slowly than on earth. The Ostwald ripening theory predicts demixing rates many orders of magnitude lower than the observed values.

Bamberger, S.↗
NASA NTRS1987

Orbit transfer rocket engine technology program. Phase 2: Advanced engine study

In Phase 2 of the Advanced Engine Study, the Failure Modes and Effects Analysis (FMEA) maintenance-driven engine design, preliminary maintenance plan, and concept for space operable disconnects generated in Phase 1 were further developed. Based on the results of the vehicle contractors Orbit Transfer Vehicle (OTV) Concept Definition and System Analysis Phase A studies, minor revisions to the engine design were made. Additional refinements in the engine design were identified through further engine concept studies. These included an updated engine balance incorporating experimental heat transfer data from the Enhanced Heat Load Thrust Chamber Study and a Rao optimum nozzle contour. The preliminary maintenance plan of Phase 1 was further developed through additional studies. These included a compilation of critical component lives and life limiters and a review of the Space Shuttle Main Engine (SSME) operations and maintenance manual in order to begin outlining the overall maintenance procedures for the Orbit Transfer Vehicle Engine and identifying technology requirements for streamlining space-based operations. Phase 2 efforts also provided further definition to the advanced fluid coupling devices including the selection and preliminary design of a preferred concept and a preliminary test plan for its further development.

Erickson, C.↗
NASA NTRS1989

Phase development and its role on subharmonic control

The conditions for resonance interaction between two instability waves in an axisymmetric jet were investigated. Considerations of the energy equation of the wave resulting from the interaction indicate that the phase angle between the wave-induced stresses and the wave-induced strains plays a crucial role in the resonance interaction. This fact is demonstrated experimentally by exciting a jet at fundamental and subharmonic frequencies. The phase angle between the waves stresses and strains was varied by varying the initial phase-difference between the two excitation waves. The subharmonic resonance was found to be highly dependent on this angle. Favorable agreement was found between the phase angles predicted by a nonlinear theory and the measured ones. The theory is used to explain the subharmonic's resonance in terms of the phase-angles.

Mankbadi, Reda R.↗