Search NASA⌕ Search

SEARCH · Search NASA

Results for “Potential energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Double-diffusive effects during solidification

When a fluid contains two diffusing components with different molecular diffusivities, such as heat and solute concentration, convective motion may be generated when potential energy is released owing to differential diffusion. In the solidification of binary alloys and doped semiconductors, temperature and concentration gradients do exist simultaneously. If these gradients are aligned in a suitable manner, convection may ensue. In the case of the binary alloy, such convection may extend through the mushy zone and may be the cause of macrosegregations. In the case of doped semiconductors, the convective motion may cause the nonuniform distribution of dopant in the product. In this paper, the fundamentals of double-diffusive convection will be reviewed, and its effect on solidification will be discussed.

Chen, C. F.↗
NASA NTRS1988

Satellite remote sensing and cloud modeling of St. Anthony, Minnesota storm clouds and dew point depression

Rawinsonde data and geosynchronous satellite imagery were used to investigate the life cycles of St. Anthony, Minnesota's severe convective storms. It is found that the fully developed storm clouds, with overshooting cloud tops penetrating above the tropopause, collapsed about three minutes before the touchdown of the tornadoes. Results indicate that the probability of producing an outbreak of tornadoes causing greater damage increases when there are higher values of potential energy storage per unit area for overshooting cloud tops penetrating the tropopause. It is also found that there is less chance for clouds with a lower moisture content to be outgrown as a storm cloud than clouds with a higher moisture content.

Hung, R. J.↗
NASA NTRS1988

An example of the association of X-ray and UV emission with H-alpha surges

From H-alpha UV, and X-ray data, the nature of a well-observed surge on November 12, 1980 has been studied to try to understand the relationships between the mechanical motions and the high-temperature emissions. The cool (H-alpha) and the hot (O v) parts of the surge plasma both show velocities in the range of 100-120 km/s. The kinetic and potential energies of the surge are two orders of magnitude higher than the radiative energy. The observations suggest that the surge occurs in open structures parallel to one leg of a large scale coronal magnetic loop. The energy is released principally in the open structure (surge) and only a small amount heats the coronal loop (X-ray signature). This energy division should probably not be treated as a general characteristic of surge events. Different events are expected to exhibit a different energy balance, and this can account for the lack of a consensus in the previous literature regarding surge/X-ray associations.

Schmieder, B.↗
NASA NTRS1988

Driving forces: Slab subduction and mantle convection

Mantle convection is the mechanism ultimately responsible for most geological activity at Earth's surface. To zeroth order, the lithosphere is the cold outer thermal boundary layer of the convecting mantle. Subduction of cold dense lithosphere provides tha major source of negative buoyancy driving mantle convection and, hence, surface tectonics. There are, however, importnat differences between plate tectonics and the more familiar convecting systems observed in the laboratory. Most important, the temperature dependence of the effective viscosity of mantle rocks makes the thermal boundary layer mechanically strong, leading to nearly rigid plates. This strength stabilizes the cold boundary layer against small amplitude perturbations and allows it to store substantial gravitational potential energy. Paradoxically, through going faults at subduction zones make the lithosphere there locally weak, allowing rapid convergence, unlike what is observed in laboratory experiments using fluids with temperature dependent viscosities. This bimodal strength distribution of the lithosphere distinguishes plate tectonics from simple convection experiments. In addition, Earth has a buoyant, relatively weak layer (the crust) occupying the upper part of the thermal boundary layer. Phase changes lead to extra sources of heat and bouyancy. These phenomena lead to observed richness of behavior of the plate tectonic style of mantle convection.

Hager, Bradford H.↗
NASA NTRS1988

The space station integrated refuse management system

The design and development of an Integrated Refuse Management System for the proposed International Space Station was performed. The primary goal was to make use of any existing potential energy or material properties that refuse may possess. The secondary goal was based on the complete removal or disposal of those products that could not, in any way, benefit astronauts' needs aboard the Space Station. The design of a continuous living and experimental habitat in space has spawned the need for a highly efficient and effective refuse management system capable of managing nearly forty-thousand pounds of refuse annually. To satisfy this need, the following four integrable systems were researched and developed: collection and transfer; recycle and reuse; advance disposal; and propulsion assist in disposal. The design of a Space Station subsystem capable of collecting and transporting refuse from its generation site to its disposal and/or recycling site was accomplished. Several methods of recycling or reusing refuse in the space environment were researched. The optimal solution was determined to be the method of pyrolysis. The objective of removing refuse from the Space Station environment, subsequent to recycling, was fulfilled with the design of a jettison vehicle. A number of jettison vehicle launch scenarios were analyzed. Selection of a proper disposal site and the development of a system to propel the vehicle to that site were completed. Reentry into the earth atmosphere for the purpose of refuse incineration was determined to be the most attractive solution.

Anderson, Loren A.↗
NASA NTRS1989

Direct numerical simulations of turbulent convection with a variable gravity and Keplerian rotation

Thermal convection was proposed as a possible mechanism for generation and maintenance of turbulence in the inner accretion disk regime of the primordial solar nebula. It is of fundamental interest to design experiments with the basic physical features of the solar nebula conditions cannot be produced in the laboratory, numerical simulations of hydrodynamic flows, which have been very successful in describing aerodynamic flows, can be suitable modified to provide experimental data for solar nebula modelling. The goals are to modify an extant, proven hydrodynamics code with the most important features of the solar nebula and other thin accretion disks: bouyancy terms to generate convection, internal heating representing the release of gravitational potential energy, a variable gravity linearly proportional the the distance from the vertical midplane due to centrifugal balance, rapid rotation with axis aligned with gravity, and Keplerian rotational shear; to determine the effect that these features have on the turbulent convection by introducing them individually and to determine the cumulative nature of the turbulent convection for accretion disk conditions; and to model the convection and the turbulence. In this manner, prior solar nebula models can be tested and their deficiencies rectified.

Cabot, William H.↗
NASA NTRS1988

Simulation of GaAs cluster formation on GaAs(00-1), AlAs(00-1), Si(001), and As1/Si(001) surfaces

Recently developed semiempirical potential energy functions for the Ga-As-Si and Ga-As-Al systems have been applied here to determine the excess formation energy for GaAs clusters on GaAs(00-1), AlAs(00-1), Si(001), and one atomic layer As-covered Si(001) substrates as a function of cluster size and cluster shape by the Monte Carlo technique. Pyramidal type ledges on the GaAs clusters are found to be the favored ledge for the first three layers while an inverted-pyramidal type ledge is also favored in certain cases for the As1/Si(001) substrate. Cluster formation at ledges is compared with cluster formation on a flat terrace for the Si(001) and the As1/Si(001) substrates.

Choi, D. K.↗
NASA NTRS1988

Acoustic levitation technique for containerless processing at high temperatures in space

High temperature processing of a small specimen without a container has been demonstrated in a set of experiments using an acoustic levitation furnace in the microgravity of space. This processing technique includes the positioning, heating, melting, cooling, and solidification of a material supported without physical contact with container or other surface. The specimen is supported in a potential energy well, created by an acoustic field, which is sufficiently strong to position the specimen in the microgravity environment of space. This containerless processing apparatus has been successfully tested on the Space Shuttle during the STS-61A mission. In that experiment, three samples wer successfully levitated and processed at temperatures from 600 to 1500 C. Experiment data and results are presented.

Rey, Charles A.↗
NASA NTRS1989

Finite-element grid improvement by minimization of stiffness matrix trace

A new and simple method of finite-element grid improvement is presented. The objective is to improve the accuracy of the analysis. The procedure is based on a minimization of the trace of the stiffness matrix. For a broad class of problems this minimization is seen to be equivalent to minimizing the potential energy. The method is illustrated with the classical tapered bar problem examined earlier by Prager and Masur. Identical results are obtained.

Kittur, Madan G.↗
NASA NTRS1989

Significance of norms and completeness in variational based methods

By means of a simple structural problem, an important requirement often overlooked in practice on the basis functions used in Rayleigh-Ritz-Galerkin type methods is brought into focus. The problem of the static deformation of a uniformly loaded beam is solved variationally by expanding the beam displacement in a Fourier Cosine series. The potential energy functional is rendered stationary subject to the geometric boundary conditions. It is demonstrated that the variational approach does not converge to the true solution. The object is to resolve this paradox, and in so doing, indicate the practical implications of norms and completeness in an appropriate inner product space.

Storch, Joel A.↗
NASA NTRS1989

Extension-torsion coupling behavior of advanced composite tilt-rotor blades

An analytic model was developed to study the extension-bend-twist coupling behavior of an advanced composite helicopter or tilt-rotor blade. The outer surface of the blade is defined by rotating an arbitrary cross section about an initial twist axis. The cross section can be nonhomogeneous and composed of generally anisotropic materials. The model is developed based upon a three dimensional elasticity approach that is recast as a coupled two-dimensional boundary value problem defined in a curvilinear coordinate system. Displacement solutions are written in terms of known functions that represent extension, bending, and twisting and unknown functions for local cross section deformations. The unknown local deformation functions are determined by applying the principle of minimum potential energy to the discretized two-dimensional cross section. This is an application of the Ritz method, where the trial function family is the displacement field associated with a finite element (8-node isoparametric quadrilaterals) representation of the section. A computer program was written where the cross section is discretized into 8-node quadrilateral subregions. Initially the program was verified using previously published results (both three-dimensional elasticity and technical beam theory) for pretwisted isotropic bars with an elliptical cross section. In addition, solid and thin-wall multi-cell NACA-0012 airfoil sections were analyzed to illustrate the pronounced effects that pretwist, initial twist axis location, and spar location has on coupled behavior. Currently, a series of advanced composite airfoils are being modeled in order to assess how the use of laminated composite materials interacts with pretwist to alter the coupling behavior of the blade. These studies will investigate the use of different ply angle orientations and the use of symmetric versus unsymmetric laminates.

Kosmatka, J. B.↗
NASA NTRS1989

A study on cloud-radiation interaction

Most empirical studies estimating the climate sensitivity due to cloud amount are based on calculating a cloud sensitivity parameter by means of satellite measurements. A different way to estimate the interaction between clouds and radiation is to determine the effect of radiative heating and cooling by clouds on the generation of available potential energy (GAPE). This provides a measure of the influence of clouds on the general circulation. The radiative contribution of clouds to the GAPE is given by the net cloud generated radiative heating (CGRH) and an efficiency factor. The CGRH, parameterized in terms of cloud type, height, and optical depth, can be estimated from satellite measurements. The efficiency factor is only a function of the temperature distribution of the atmosphere. Thus, taking satellite measurements as for instance those of the ISCCP, the radiative impact of clouds on the general circulation can be inferred.

Stuhlmann, R.↗
NASA NTRS1990

Clustered or regular cumulus cloud fields - The statistical character of observed and simulated cloud fields

The spatial distribution of cumulus clouds is assumed to be the result of the effects of convective activity on the thermodynamic environment. The effects can be parameterized in terms of a stabilization function representing the time rate of change of convective available potential energy. Using these results, a new inhibition hypothesis explaining the expected characteristics of the spatial distribution of cumulus clouds is postulated. This paper performs a verification of the inhibition hypothesis on real and simulated cloud fields. In order to do so, an objective measure of the spatial characteristics of cumulus clouds is introduced. Multiple cloud experiments are performed with a three-dimensional numerical cloud model. Skylab pictures of real cumuli are also used in the verification. Results of applying this measure to simulated and observed cumulus cloud fields confirm the inhibition hypothesis.

Ramirez, Jorge A.↗
NASA NTRS1990

Stabilization functions of unforced cumulus clouds - Their nature and components

The nature and the spatial distribution of cumuli within an unforced cumulus cloud field are investigated. The thermodynamic effects of convection are quantified as functions of changes of convective available potential energy (CAPE) induced by the convective overturning, and the time rate of change of CAPE is parameterized in terms of a kernel of influence or stabilization function. A three-dimensional cloud model is used to infer and quantify stabilization functions by performing single-cloud experiments. On the basis of the results obtained, a new hypothesis with respect to the spatial distribution of cumuli is postulated, which states that, under completely homogeneous external conditions and assuming a spatially random distribution of cloud-triggering mechanisms, the spatial distribution of cumuli in the resulting cloud field must be regular, as opposed to either random or clustered, because cumulus clouds tend to reduce the available energy for convection, thereby inhibiting further convection nearby.

Ramirez, Jorge A.↗
NASA NTRS1990

Ballooning instability of the earth's plasma sheet region in the presence of parallel flow

Stability of the plasma sheet and plasma sheet boundary layer against the ballooning mode instability is investigated. The equilibrium state of a two-dimensional plasma sheet configuration with parallel sheared flow is modeled. This equilibrium is shown to be ballooning unstable when delta-W is not positive definite, where delta-W is the potential energy. The eigenmode structure of the ballooning mode is found by imposing the boundary conditions that the waves are totally reflected from the ionosphere, and that no waves are coming in from infinity. The eigenmode structure of the unstable balloning modes is highly oscillatory, extending beyond about 100 R(E). The ballooning modes are thus a possible candidate for explaining the MHD waves and other dynamical events observed in the magnetotail by ISEE 3 and other spacecraft.

Lakhina, G. S.↗
NASA NTRS1991

Combined compressive and shear buckling analysis of hypersonic aircraft structural sandwich panels

The combined-load (compression and shear) buckling equations were established for orthotropic sandwich panels by using the Rayleigh-Ritz method to minimize the panel total potential energy. The resulting combined-load buckling equations were used to generate buckling interaction curves for super-plastically-formed/diffusion-bonded titanium truss-core sandwich panels and titanium honeycomb-core sandwich panels having the same specific weight. The relative combined-load buckling strengths of these two types of sandwich panels are compared with consideration of their sandwich orientations. For square and nearly square panels of both types, the combined load always induces symmetric buckling. As the panel aspect ratios increase, antisymmetric buckling will show up when the loading is shear-dominated combined loading. The square panel (either type) has the highest combined buckling strength, but the combined load buckling strength drops sharply as the panel aspect ratio increases. For square panels, the truss-core sandwich panel has higher compression-dominated combined load buckling strength. However, for shear dominated loading, the square honeycomb-core sandwich panel has higher shear-dominated combined load buckling strength.

Ko, William L.↗
NASA NTRS1991

The physics of the oscillating lightning

The lightning is proposed to start in a limited region of electric breakdown field. A growing charge pool in a cumulonimbus cloud is likely to produce such a field in its outer layers. When the field is not aligned with the potential surfaces, the electric force pushes positive charge in one direction and negative in the opposite. Self inductance develops and an embryo open electric circuit is born. Oscillations swiftly grow in strength when potential energy of the cloud is released. The channel extends in steps during those cycle stages where charge is crammed into the channel terminals. Electrostatic consequences of a narrow conductor among the cloud charges are computed. The conductor is charged by influence to such a degree that the charge is bound to leak out to the ambient air and appear as a charge sheath some distance off the channel. Ample energy is released to sustain the oscillations. The period increases with channel length and agrees well with observed time between steps. A ground strike leads to a shock pulse travelling up the channel.

Storebo, Per B.↗
NASA NTRS1991

Middle atmosphere heating by exothermic chemical reactions involving odd-hydrogen species

The rate of heating which occurs in the middle atmosphere due to four exothermic reactions involving members of the odd-hydrogen family is calculated. The following reactions are considered: O + OH yields O2 + H; H + O2 + M yields HO2 + M; H + O3 yields OH + O2; and O + HO2 yields OH + O2. It is shown that the heating rates due to these reactions rival the oxygen-related heating rates conventionally considered in middle-atmosphere models. The conversion of chemical potential energy into molecular translational energy (heat) by these odd-hydrogen reactions is shown to be a significant energy source in the middle atmosphere that has not been previously considered.

Mlynczak, Martin G.↗