Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Structure, Morphology, and Photovoltaic Implications of Halide Alloying in Lead-Free Cs 3 Sb 2 Cl x I 9-x 2D-Layered Perovskites

Compositional tuning has been a major driving force behind the excellent optoelectronic properties observed in typical Pb-based perovskites. For lead-free perovskite derivatives, a challenge to understanding the connection between compositional tuning and intrinsic optoelectronic properties, hence a barrier towards boosting their performance, comes from the fact that multiple crystalline substructures can form based on composition, film processing, or both. Especially with lower dimensional (0D, 1D, 2D) substructures, the particular polymorph present in the film can be a greater determinant of optoelectronic properties than the composition itself. Herein, we report a simple method to alloy the halide site in all-inorganic lead-free Cs 3 Sb 2 I 9 films while maintaining a consistent 2D-layered substructure, as a means to independently study the photovoltaic implications of halide substitution. We use a broad suite of spectroscopy and device measurements to identify an optimal stoichiometric substitution of chloride for iodide (~ 8 mol%, measured) that balances both intrinsic and bulk optoelectronic properties to achieve a top power conversion efficiency of 2.2%. This work underscores the importance of controlling substructure while investigating the impacts of compositional tuning for the development of lead-free perovskites, and more broadly validates the approach towards realizing lead-free alternative perovskite solar technologies.

14 SOLAR ENERGY↗
DOE OSTI2022

Blade Coating Inverted Perovskite Solar Cells with Vacuum-Assisted Nucleation Based on Bottom Quasi-2D Passivation

Metal halide perovskite solar cells (PSCs) attract an enormous attention because of their high power conversion efficiency (PCE) and low fabrication cost. However, their commercialization is limited by fabricating highly efficient large-area solar cells. Controlling the morphology and crystallization of perovskite for large-area fabrication is difficult but important. Here, in this work, a vacuum-assisted approach is developed to obtain mirror-like, pinhole-free, highly crystalline, and uniform blade-coated perovskite films, without the use of antisolvent and air knife. This method can be a universal approach for various perovskite compositions. Meanwhile, the phenethylammonium iodide passivation effect at the top and bottom interfaces of perovskite layer based on FTO/NiO x /perovskite/C 60 /BCP/Cu inverted p-i-n structure is systematically investigated. The optimized device fabricated by blade coating under an ambient environment exhibits the champion PCE of 20.7% and is among the top few records of blade coating inverted structure based on NiOx hole transport layer. The encapsulated device retains 97% of its maximum efficiency under open-circuit condition after 1000 h of photostability test in an ambient environment at room temperature with a relative humidity of 40–60%. Herein, low-cost, easy, and reproducible strategies to fabricate efficient and stable blade-coated PSCs are demonstrated.

14 SOLAR ENERGY↗
DOE OSTI2023

Ag Alloying in Cu 2– y Ag y Ba(Ge,Sn)Se 4 Films and Photovoltaic Devices

Trigonal Cu 2 BaGe 1–x Sn x Se 4 (CBGTSe) has recently gained interest as a potential photovoltaic absorber to target mitigation of antisite defect formation in Cu 2 ZnSn(S,Se) 4 . This study examines partial substitution of Cu by Ag as a potential approach to tune the properties of Ag-incorporated CBGTSe in the following aspects: 1) phase stability and crystal structure as a function of Ag content; 2) film morphology and grain structure; 3) charge carrier properties; 4) band positions; and 5) charge carrier kinetics and recombination. Up to 20% of Cu can be substituted by Ag in CBGTSe, while above 20% a phase mixture appears. Increasing Ag content induces larger average grain size and reduced hole carrier densities. In contrast, photoelectron spectroscopy and photoluminescence measurements reveal negligible impact of Ag substitution on ionization potential (≈5.4 eV) and electron affinity (≈3.7 eV). Also, Ag content offers negligible impact on carrier lifetimes (few ns). Consistent with these fundamental properties, solar cells based on two different Ag/(Ag + Cu) ratios (≈0% and ≈20%) show comparable power conversion efficiencies (≈2.7–2.8%). Finally, these results indicate that CBGTSe films and solar cells may be less sensitive to Ag substitution compared to Cu 2 ZnSn(S,Se) 4 , at least at the current level of absorber and device optimization.

14 SOLAR ENERGY↗
DOE OSTI2023

First of Their Kind: Solar Cells with a Dry-Processed Perovskite Absorber Layer via Powder Aerosol Deposition and Hot-Pressing

Preparing halide perovskite films by solvent-free, powder-based processing approaches currently attracts more and more attention. However, working solar cells employing dry, powder-based halide perovskite thin films, have not been demonstrated so far. Herein, perovskite solar cells are presented where the absorber layer is prepared by transferring readily synthesized perovskite powders into a compact thin film using a fully dry-powder-processing concept. Compact thin films are deposited via an optimized powder aerosol deposition (PAD) process. Pressing at 120 °C further improves the morphology and the optoelectronic film properties. Integrating the perovskite films in a solar cell configuration results in fully working devices, with champion power conversion efficiencies of >6%. While the (optoelectronic) properties of the PAD-processed films are found to be comparable with their solution-processed counterparts, investigations of the solar cell stack suggest deterioration of the electron-transport layer properties due to the PAD process, and the presence of hydrates at the perovskite surface to be important factors that contribute to the limited solar cell efficiency. Herein, perspectives to overcome the identified limitations are outlined, emphasizing the high potential and realizability of efficient perovskite solar cells based on dry-powder-processing approaches in the future.

14 SOLAR ENERGY↗
DOE OSTI2023

Thermal Performance of Perovskite-Based Photovoltaics for Operation in Low Earth Orbit

Perovskite-based photovoltaics are attractive for applications in space. The space environment is harsh with ionizing radiation, atomic oxygen, UV radiation, extreme temperatures, and thermal cycling. Herein, the thermal performance of perovskite active layer and perovskite photovoltaic devices in low earth orbit is analyzed. A 1 μm silicon oxide layer coupled with 500 nm zirconia thin film aid in cell thermal management is determined. The residual stresses between various layers in a device are modeled and it is proved that thermally induced mechanical failure of the perovskite (time > 460 years) is unlikely during operating lifetime of any mission. In conclusion, target power conversion efficiencies are also shared to manage maximum operating temperature of a perovskite-based device.

14 SOLAR ENERGY↗
DOE OSTI2019

Erbium doped anatase TiO{sub 2} nanoparticles for photovoltaic applications

Doping of rare earth metal erbium (Er) into the nanocrystalline titanium dioxide (TiO{sub 2}) was identified to enhance the performance of photocatalytic and photovoltaic applications. Herein, TiO{sub 2} was doped with different concentrations of erbium through hydrothermal method and then employed to photocatalytic and photovoltaic applications. XRD, FT-IR, TEM, AFM, UV–visible DRS and photocatalytic measurements were carried out to examine the impact of erbium doping on TiO{sub 2}. The photovoltaic study revealed that the Er doped TiO{sub 2} exhibited the better power conversion efficiency with high short-circuit current density (J{sub sc}) and open-circuit voltage (V{sub oc}). This enhancement may be due to the reduced charge recombination, increased dye absorption ability and fast photoelectron injection.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Designing difluoro substituted benzene ring based fullerene free acceptors for small Naphthalene Di-Imide based molecules with DFT approaches

Herein current research work, we designed four new acceptor materials for small solar cell molecules with Naphthalene Di-Imide central unit by employing the wB97xd/6-31 G (d,p) and TD-wB97xd/6-31 G (d,p) level of density functional theories. Absorption properties of designed materials are excellent between the 400 nm to 510 nm with chloroform solvent and 340 nm to 490 nm in gas phase, small reorganization energy values 0.0163–0.0172 eV for electron (λ{sub e}) and 0.0205–0.0257 eV for hole transfer (λ{sub h}), large expected open circuit voltages (V{sub oc}) from 3.60 to 4.53 eV with respect to [6, 6]-phenyl-C61-butyric acid methyl ester (PCBM), high dipole moment strength ranging from 4.0199 to 8.9647 Debye in excited state and 3.3847 Debye to 7.2632 Debye in ground state which are very helpful for the further construction of organic solar cell (OSC) devices with improved and better power conversion efficiencies (PCEs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Possibility to Use Hydrothermally Synthesized CuFeS{sub 2} Nanocomposite as an Acceptor in Hybrid Solar Cell

Here we have approached the plausible use of CuFeS{sub 2} nanocomposite as an acceptor in organic–inorganic hybrid solar cell. To produce CuFeS{sub 2} nanocomposite, hydrothermal strategy was employed. The room-temperature XRD pattern approves the synthesized material as CuFeS{sub 2} with no phase impurity (JCPDS Card no: 37-0471). The elemental composition of the material was analyzed from the TEM-EDX data. The obtained selected area electron diffraction (SAED) planes harmonized with the XRD pattern of the synthesized product. Optical band gap (4.14 eV) of the composite from UV–Vis analysis depicts that the synthesized material is belonging to wide band gap semiconductor family. The HOMO (− 6.97 eV) and LUMO (− 2.93 eV) positions from electrochemical study reveal that there is a possibility of electron transfer from MEH-PPV to CuFeS{sub 2}. The optical absorption and photoluminescence spectra of MEH-PPV:CuFeS{sub 2} (donor:acceptor) composite were recorded sequentially by varying weight ratios. The monotonic blue shifting of the absorption peak position indicated the interaction between donor and acceptor materials. The possibility of electron transfer from donor (MEH-PPV) to acceptor (CuFeS{sub 2}) was approved with photoluminescence analysis. Subsequently, we have fabricated a hybrid solar cell by incorporating CuFeS{sub 2} nanocomposite with MEH-PPV in open atmosphere and obtained 0.3% power conversion efficiency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Metal Amorphous Nanocomposite (MANC) Alloy Cores with Spatially Tuned Permeability for Advanced Power Magnetics Applications

Metal amorphous nanocomposite (MANC) alloys are an emerging class of soft magnetic materials showing promise for a range of inductive components targeted for higher power density and higher efficiency power conversion applications including inductors, transformers, and rotating electrical machinery. Magnetization reversal mechanisms within these alloys are typically determined by composition optimization as well as controlled annealing treatments to generate a nanocomposite structure composed of nanocrystals embedded in an amorphous precursor. Here in this paper we demonstrate the concept of spatially varying the permeability within a given component for optimization of performance by using the strain annealing process. The concept is realized experimentally through the smoothing of the flux profile from the inner to outer core radius achieved by a monotonic variation in tension during the strain annealing process. Great potential exists for an extension of this concept to a wide range of other power magnetic components and more complex spatially varying permeability profiles through advances in strain annealing techniques and controls.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evaluation of mitigation strategies for radioactive fission gases in fluoride-salt-cooled high-temperature reactors

Here, the Fluoride-salt-cooled High-temperature Reactor (FHR) is a promising Generation IV nuclear reactor due to its improved safety design, near atmospheric working pressure, and high electric power conversion efficiency. However, control of radioactive fission gases, such as tritium, is a critical issue in FHRs due to the significantly larger production rate and potentially larger leakage rate of tritium compared to those in Light Water Reactors (LWRs). Therefore, this study proposes two mitigation strategies for tritium in FHRs: Double-Wall Heat eXchanger with a Tritium Carrier (DWHX-TC) option and Single-Wall Heat eXchanger with a Tritium Barrier (SWHX-TB) option. For the DWHX-TC option, two tube surface configurations, i.e., plain and fluted tubes, and four tritium carriers, i.e., helium, FLiBe, FLiNaK, and KF-ZrF 4 , are initially considered, among which the best tube configuration and promising tritium carrier are then selected and used for design optimization of the DWHX. For the SWHX-TB option, two cases, tritium barriers with and without cracks, are investigated in this study. In addition, the two mitigation strategies are evaluated by an in-house, one-dimensional, coupled HEat and MAss Transfer (HEMAT) code developed to predict the leakage rate of tritium in nuclear systems. Our analysis shows that (1) a double-wall configuration using fluted tubes as both the inner and outer tubes is better than other double-wall configurations investigated; (2) helium, as a tritium carrier, is superior to other candidates, including FLiBe, FLiNaK, and KF-ZrF 4 ; (3) the leakage rate of tritium (into the atmosphere) is reduced from 3400 Ci/day, taking the Advanced High-Temperature Reactor (AHTR) as a reference, to 4.0 Ci/day for an optimum design of the DWHX-TC option using helium as the tritium carrier and 1.7 Ci/day for an optimum design of the SWHX-TB option using 30-µm thick silicon carbide (SiC) as the tritium barrier (no cracks); and (4) potential cracks in tritium barriers may significantly deteriorate mass transfer performance of the SWHX-TB option. For example, a cracking rate of 0.1% leads to an increase of 694.1% in the leakage rate under the conditions investigated.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Evaluation of PbTe and SnTe as Ohmic Contact Layers in CdTe Solar Cell Devices

For solar cells based on CdTe, the choice of a suitable back contact material is limited by CdTe's deep work function. Here, we explored p-type PbTe and SnTe as ohmic contacts to CdTe. These contact layers were grown on single crystal CdTe substrates by molecular beam epitaxy, and the valence band offset between film and substrate was measured using X-ray photoemission spectroscopy. Polycrystalline device structures were also grown by sublimation to assess performance improvements. Doping was achieved in PbTe by thallium incorporation. Only the highest Tl doped PbTe resulted in a desirable band alignment with the CdTe, forming an electron reflector and no hole barrier. Time-resolved photoluminescence measurements also revealed significant photocarrier lifetime improvements for only the highest doped PbTe. Consequentially, devices incorporating the highest doped PbTe layers showed increased power conversion efficiency, primarily from increased fill factor. Doping of the PbTe was measured via Hall effect with variable magnetic field, which was required due to the formation of an n-type parasitic interface layer. To properly interpret the variable field Hall measurements, we derived an expression for the magnetic field-dependent conductivity tensor of an L-valley semiconductor.

anisotropic band valley↗
DOE OSTI2022

Unique W-Shape Y6 isomer as effective solid additive for High-Performance PM6:Y6 polymer solar cells

The current top-performing polymer solar cell (PSC) systems are mostly based on PM6:Y6 host blend. To date, numerous materials have been explored as the third component for these systems to form ternary blends or as additives. Vitrification agents are a group of additives proved to be useful in affecting the morphology of organic semiconductors. Here to design a suitable vitrification agent for non-fullerene electron acceptor Y6, an isomer strategy was explored where the thienothiophene wings of the Y6 molecule were inversed to form a W-shaped Y6 isomer of i-Y6. It was found that i-Y6 crystallized poorly with a different packing style than Y6 and could blend well in amorphous phase of Y6. These properties enabled i-Y6 to finely tune the morphology of PM6:Y6 blend at low additive dosages. The power conversion efficiency (PCE) of PM6:Y6 based PSC was raised from 16.827% to 17.433% at a dosage of Y6:i-Y6 ratio of 24:1. This work demonstrated isomerization as a viable strategy for developing solid additives for high performance PSC blends and vitrification agents as effective additives for tuning morphology and improving performances of PSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Verifying the structure-property-performance relationship of Y6-based small molecule acceptors by alkoxy-side chain isomerization and conjugated skeleton asymmetry

Non-fullerene small molecule acceptors (NF-SMAs) such as Y6 derivatives were the current working horse for the top performing polymer solar cells (PSCs). For this reason, numerous chemical modifications have been explored for establishing structure–property-performance relationship for Y6-based NF-SMAs. In this work, we explored the isomerization on asymmetrical Y6 derivatives by varying the position of alkoxy side chain on the thiophene linkage between the core and one of the end groups of Y6. The isomers with differences in conformational restriction raised by noncovalent interactions as well as steric hindrance revealed distinctive behavior in crystallization and polymorphism, which led to a significant contrast in PSC performances. Here the X-TO1 molecule with alkoxy side chain facing the end group (outward) displayed preferred molecular configuration and polymorph, delivering power conversion efficiency (PCE) of 15.63%, while its isomer X-TO2 showed coexisted polymorphs significantly increased the charge recombination in the PSC devices led to a low PCE around 3%. This structure–property-performance relationship not only highlighted the elegancy of isomerization in tuning the photovoltaic performances but also identified polymorphism as one of the causes for impairing photovoltaic performances of PSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of heterostructure engineering on electronic structure and transport properties of two-dimensional halide perovskites

Organic-inorganic halide perovskite solar cells have attracted much attention due to their low-cost fabrication, flexibility, and high-power conversion efficiency. More recent efforts show that the reduction from three- to two-dimensions (2D) of organic–inorganic halide perovskites promises an exciting opportunity to tune their electronic properties. Here, we explore the effect of reduced dimensionality and heterostructure engineering on the intrinsic material properties, such as energy stability, bandgap and transport properties of 2D hybrid organic–inorganic halide perovskites using first-principles density functional theory. We show that the energy stability of engineered perovskite heterostructures is significantly enhanced. The heterostructures with improved stability also show excellent transport properties similar to their bulk counterparts. Furthermore, these layered chemistries demonstrate the advantage of a broad range of tunable bandgaps and high-absorption coefficient in the visible spectrum. The proposed 2D heterostructured material holds potential for nano-optoelectronic devices as well as for effective photovoltaics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enhance the performance of organic solar cells by nonfused ring electron acceptors bearing a pendent perylenediimide group

A new nonfused ring electron acceptor PDI-DO-2F is designed and synthesized by attaching perylenediimide (PDI) unit as a pendent group to the central donor core. Compared with the control molecule DO-2F, the introduction of PDI lateral substituent can greatly enhance the solubility and decrease the crystallinity of the resulted acceptor. The PBDB-T:PDI-DO-2F blend film exhibits a much better morphology with higher and more balanced carrier mobility in contrast to PBDB-T:DO-2F one. PDI-DO-2F based organic solar cells (OSCs) give a power conversion efficiency (PCE) of 11.78%, higher than DO-2F based ones (9.82%). Furthermore, PDI-DO-2F based OSCs shows a ΔE non-rad value of 0.23 eV, which is significantly lower than the DO-2F based ones (0.28 eV). More importantly, the addition of PDI-DO-2F as the third component to the PBDB-T:DO-2F binary system can optimize the morphology of blend films and improve the shelf stability of devices. Finally, the PBDB-T:DO-2F:PDI-DO-2F based ternary OSCs achieve a higher PCE of 13.82%.

14 SOLAR ENERGY↗
DOE OSTI2020

Carbon quantum dots interfacial modified graphene/silicon Schottky barrier solar cell

The two-dimensional thin film, as an effective interface modification layer to improve the power conversion efficiency (PCE) of graphene/silicon (Gr/Si) heterojunction solar cells has attracted extensive attention recently. However, the complicated manufacturing process and specialized equipment requirements impede its broad application. Herein, carbon quantum dots (CQDs) fabricated under the mild reaction condition was first time used to modify Gr/Si devices interface structure. The effects of CQDs size distributions and coating thickness on J-V characteristics and the energy band structure of Gr/CQDs/Si solar cells were systematically analyzed. The findings indicate that the PCE of resulting Gr/CQDs/Si solar cells could reach 9.97% when the thickness and sizes of CQDs interlayer are ~26 nm and 4–7 nm, without any chemical doping, which is 6.8-times PCE than that of virgin Gr/Si solar cells. The CQDs interlayer serves as both an electron blocking layer and hole transport layer to reduce the carrier recombination, leading to a lower reverse saturation current as well as a larger VOC then improved the device performance. The enhanced PCE shows that the CQDs species have the potential applications in a cost-effective photovoltaic device.

14 SOLAR ENERGY↗
DOE OSTI2020

Tailored PEDOT:PSS hole transport layer for higher performance in perovskite solar cells: Enhancement of electrical and optical properties with improved morphology

Precise control over the charge carrier dynamics throughout the device can result in outstanding performance of perovskite solar cells (PSCs). Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is the most actively studied hole transport material in p-i-n structured PSCs. However, charge transport in the PEDOT:PSS is limited and inefficient because of its low conductivity with the presence of the weak ionic conductor PSS. In addition, morphology of the underlying PEDOT:PSS layer in PSCs plays a crucial role in determining the optoelectronic quality of the active perovskite absorber layer. This work is focused on realization of a non-wetting conductive surface of hole transport layer suitable for the growth of larger perovskite crystalline domains. This is accomplished by employing a facile solvent-engineered (ethylene glycol and methanol) approach resulting in removal of the predominant PSS in PEDOT:PSS. The consequence of acquiring larger perovskite crystalline domains was observed in the charge carrier dynamics studies, with the achievement of higher charge carrier lifetime, lower charge transport time and lower transfer impedance in the solvent-engineered PEDOT:PSS-based PSCs. Use of this solvent-engineered treatment for the fabrication of MAPbI3 PSCs greatly increased the device stability witnessing a power conversion efficiency of 18.18%, which corresponds to ~37% improvement compared to the untreated PEDOT:PSS based devices.

14 SOLAR ENERGY↗
DOE OSTI2023

Photoelectrochemical and Photovoltaic Performance of As-deposited Ink-based CuInS 2 Heterojunction Thin Film

In this report, we demonstrate low-temperature ink-based fabrication of CuInS 2 -based photoelectrodes for hydrogen production capable of producing photocurrent densities as high as 8.8mA.cm -2 . In this process, molecular ink made of metal chlorides and thiourea dissolved in methanol was spin coated onto Mo-coated soda lime glass substrates. Samples were then placed on a hot plate (sample surface temperature: 250°C) to induce CuInS 2 formation and remove the solvent and by-products. No further processing, such as high temperature sulfurization, was performed. Further, the CuInS 2 films were then integrated as photocathode for hydrogen evolution by photoelectrodeposition of Pt nanoparticles. Photocurrent density of 0.4mA.cm -2 at 0V vs. RHE was detected from such electrodes. However, samples coated with CdS/ZnO/ITO overlayers forming heterojunction prior to Pt deposition exhibited significant improvement of the photocurrent density, reaching 8.8mA.cm -2 at 0V vs. RHE, highlighting the improved charge transfer by the p-n junction formed at the CuInS 2 /CdS interface. The charge transfer resistance of the CuInS 2 /CdS/ZnO/ITO-Pt photoelectrode was almost 5 times lower than that of the CuInS 2 -Pt photoelectrode as revealed by electrochemical impedance spectroscopy analysis. In addition, the onset potential was shifted by ca. 0.45V toward the anodic direction, reaching 0.75V vs. RHE. Solar cell made of identical structure (Mo/CuInS 2 /CdS/ZnO/ITO) showed power conversion efficiency of 2.1% with short-circuit photocurrent density and open circuit voltage of 7.4mA.cm -2 and 820mV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗