Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31

Processing study of a high temperature adhesive

An adhesive-bonding process cycle study was performed for a polyimidesulphone. The high molecular weight, linear aromatic system possesses properties which make it attractive as a processable, low-cost material for elevated temperature applications. The results of a study to better understand the parameters that affect the adhesive properties of the polymer for titanium alloy adherends are presented. These include the tape preparation, the use of a primer and press and simulated autoclave processing conditions. The polymer was characterized using Fourier transform infrared spectroscopy, glass transition temperature determination, flow measurements, and weight loss measurements. The lap shear strength of the adhesive was used to evaluate the effects of the bonding process variations.

Progar, D. J.↗

Convective Biases in the US DOE Global Storm‐Resolving Model: Insights From Regionally Refined Simulations During the CACTI Campaign

Accurately simulating convective processes in complex terrain remains a critical challenge for global storm-resolving models (GSRMs). This study systematically evaluates moist convective biases in the Regionally Refined Mesh configuration of the U.S. Department of Energy Simple Cloud-Resolving E3SM Atmosphere Model (RRM-SCREAM) using comprehensive observations and large-eddy simulations from the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) campaign in the mountainous area of central Argentina. Comparisons of simulations with high-resolution observations and reanalysis data indicate that RRM-SCREAM effectively captures large-scale meteorological patterns, including regional atmospheric gradients and diurnal variability. However, RRM-SCREAM disproportionately produces smaller precipitation clusters referred to as “popcorn convection,” and exaggerated rainfall intensities compared to observations and reference models. Detailed examination of a representative orographic shallow-to-deep convective transition case shows that RRM-SCREAM delays initial shallow convection growth due to lower-tropospheric dryness and sustained convective inhibition, but once triggered, deep convection becomes overly vigorous with excessively strong vertical velocities and elevated cloud ice content, linked to a thermodynamic structure characterized by suppressed low-level moistening and excessive upper-level moisture retention. Our results highlight specific deficiencies in the model representation of convective vertical velocity, cloud microphysical processes, and convective precipitation organization within RRM-SCREAM. Addressing these biases is essential for improving the predictions of convective clouds and precipitation in the global high-resolution atmospheric models.

Su, Tianning [Lawrence Livermore National Laborato↗

Computer simulation of the NASA water vapor electrolysis reactor

The water vapor electrolysis (WVE) reactor is a spacecraft waste reclamation system for extended-mission manned spacecraft. The WVE reactor's raw material is water, its product oxygen. A computer simulation of the WVE operational processes provided the data required for an optimal design of the WVE unit. The simulation process was implemented with the aid of a FORTRAN IV routine.

Bloom, A. M.↗

A New Approach to Using a Cloud-Resolving Model to Study the Interactions between Clouds, Precipitation and Aerosols

Recently Grabowski and Khairoutdinov and Randall have proposed and demonstrated, the feasibility of using 2D CRMs (these did not include detailed land processes and used periodic lateral boundary conditions) as 'super-parameterizations or a multi-scale modeling framework MMF' for cloud processes within atmospheric generation circulation models (GCMs). In the MMF, a fine-resolution 2D CRM takes the place of the single-column parameterization that is used in conventional GCMs. An overview of this approach is given by Randall et al.. Since a CRM can explicitly simulate cloud processes at the natural space and time scales of clouddynamical processes, it's possible to compute statistics of cloud fields, including radiances and radar backscatters, directly simulated/produced by the CRM. A seed fund is available at NASA Goddard to build a MMF based on a 2D GCE model and the Goddard fvGCM. A prototype MMF will be developed at end of 2004. The major objectives are to test and evaluate its performance using the GCE model as the super parameterization and compare its results with other super parameterizations, conventional GCMs and observations. Recently, a detailed spectral-bin microphysical scheme was implemented into the Goddard Cumulus Ensemble (WE) model. The GCE model is a CRM and it has been improved and applied to study the precipitation processes in the past two decades. Atmospheric aerosols are also described using number density size-distribution functions. The model is tested by studying the evolution of deep tropical clouds in the west Pacific warm pool region and summertime convection over a mid-latitude continent with different concentrations of CCN: a low 'clean' concentration and a high 'dirty' concentration. The impact of atmospheric aerosol concentration on cloud and precipitation will be investigated. In addition, the similarities and differences between bulk- and spectral-bin microphysics will be presented,

Tao, Wei-Kuo↗

Forced and Unforced Variability of Twentieth Century North American Droughts and Pluvials

Research on the forcing of drought and pluvial events over North America is dominated by general circulation model experiments that often have operational limitations (e.g., computational expense, ability to simulate relevant processes, etc). We use a statistically based modeling approach to investigate sea surface temperature (SST) forcing of the twentieth century pluvial (1905-1917) and drought (1932-1939, 1948-1957, 1998-2002) events. A principal component (PC) analysis of Palmer Drought Severity Index (PDSI) from the North American Drought Atlas separates the drought variability into five leading modes accounting for 62% of the underlying variance. Over the full period spanning these events (1900-2005), the first three PCs significantly correlate with SSTs in the equatorial Pacific (PC 1), North Pacific (PC 2), and North Atlantic (PC 3), with spatial patterns (as defined by the empirical orthogonal functions) consistent with our understanding of North American drought responses to SST forcing. We use a large ensemble statistical modeling approach to determine how successfully we can reproduce these drought/pluvial events using these three modes of variability. Using Pacific forcing only (PCs 1-2), we are able to reproduce the 1948-1957 drought and 1905-1917 pluvial above a 95% random noise threshold in over 90% of the ensemble members; the addition of Atlantic forcing (PCs 1-2-3) provides only marginal improvement. For the 1998-2002 drought, Pacific forcing reproduces the drought above noise in over 65% of the ensemble members, with the addition of Atlantic forcing increasing the number passing to over 80%. The severity of the drought, however, is underestimated in the ensemble median, suggesting this drought intensity can only be achieved through internal variability or other processes. Pacific only forcing does a poor job of reproducing the 1932-1939 drought pattern in the ensemble median, and less than one third of ensemble members exceed the noise threshold (28%). Inclusion of Atlantic forcing improves the ensemble median drought pattern and nearly doubles the number of ensemble members passing the noise threshold (52%). Even with the inclusion of Atlantic forcing, the intensity of the simulated 1932-1939 drought is muted, and the drought itself extends too far into the southwest and southern Great Plains. To an even greater extent than the 1998-2002 drought, these results suggest much of the variance in the 1932-1939 drought is dependent on processes other than SST forcing. This study highlights the importance of internal noise and non SST processes for hydroclimatic variability over North America, complementing existing research using general circulation models.

Cook, Benjamin I.↗

Manual Crew Override of Vehicle Landings Following G-Transitions

BACKGROUND Manual control during exploration spaceflight consists of both planned automated supervisory control and unplanned crew override. This crew override capability is critical to enable overall mission success during landing contingencies. However, the introduction of manual override capabilities must be implemented to enable crews to mitigate risks introduced by human error. Adaptive changes in the sensorimotor system can manifest during g-transitions as spatial disorientation. While training and landing aids enable successful landing through disorientation, these adaptive changes may increase cognitive demand that needs to be accounted for in the manual control strategy. It is important to characterize these effects as soon as possible following the G-transition to develop appropriate countermeasures. METHODS In this study, we will examine operational piloting tasks following International Space Station (ISS) missions in a simulated lunar landing using a six-degree-of-freedom (6DOF) motion base. The motion-based simulation will be implemented in our laboratory at the Johnson Space Center (JSC) and will be available within hours following the return from commercial crew landings. The primary goals of this study are (1) to understand the impact of spaceflight on crew ability to perform manual crew override tasks, (2) to examine how adaptive changes in vestibular and cognitive function relate to changes in manual crew override proficiency, and (3) compare performance during late “just-in-time” on-board training with early post-flight crew performance. The impact of spaceflight on piloting capability will be assessed from pre- versus post-flight changes in crewmembers assigned to either short duration (< 30 day) or long duration (~6- month) missions to the International Space Station (ISS). Individual differences in post-flight vestibular and cognitive changes include motion sickness reports, measures of tilt motion perception accuracy and precision, and dual-task tracking. During the 6DOF lunar simulation, the crew will manually takeover attitude and rate-of-descent to the nominal or re-designated landing aim point during the approach phase. The outcome measures for the lunar crew override tasks will be the percent time maintaining actual vehicle states, e.g., attitude and rate-of-descent, within recommended guidance during the landing approach, number and maximum deviation outside limits, and root mean square error (RMSE). Given that “just-in-time” (JIT) training is an operational expectation for the Human Landing System (HLS) program, all participants will perform late inflight JIT training for each manual crew override task in which they will participate. Crew proficiency will be captured inflight during JIT training that will be implemented on a laptop with hand controllers to allow the crewmember to practice the landing task procedures like the approach implemented for JIT training with Shuttle landing and ISS telerobotic tasks. COUNTERMEASURE UPDATES The lunar lander simulation has been implemented onto a two-laptop display system where subjects select from alternative landing points, based upon avoiding hazards that the on-board system identifies during the landing. The subject makes inputs using a rotational hand controller (i.e., joystick) and a translational hand controller, which are processed by simulated vehicle dynamics to update the vehicle attitude and rate of descent. Subjects will utilize a combination of flight, situation, and status displays to monitor the state of the simulated vehicle. The simulation exports tilt and translation movements to a 6DOF motion base synced to visual movements and provides representative vestibular cues to the subject while performing the task inside an enclosed cabin featuring a simulated lunar out-the-window view and a heads-down lander cockpit view. RELEVANCE This project will deliver an operational demonstration of crew override capability following spaceflight and identify potential deficits that may require remediation. Comparison of individual vestibular and cognitive changes with crew override performance will help better characterize the manual control risks associated with sensorimotor alterations. The inclusion of “just-in-time” on-board training will ensure we are characterizing changes in override proficiency with this expected countermeasure in place. ACKNOWLEDGEMENTS: The authors acknowledge contributions from Draper, HLS Joint Test Panel, Crew HLS Interfaces for Piloting Working Group, and Dynamic Skills Trainer (DST) Lab toward the development of the lunar landing simulation. This project is funded by the Human Health Countermeasures Element.

Austin M Bollinger↗

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-Resolving Model Simulations

Cloud microphysics are inevitable affected by the smoke particle (CCN, cloud condensation nuclei) size distributions below the clouds. Therefore, size distribution parameterized as spectral bin microphysics are needed to explicitly study the effect of atmospheric aerosol concentration on cloud development, rainfall production, and rainfall rates convective clouds. Recently, two detailed spectral-bin microphysical schemes were implemented into the Goddard Cumulus Ensembel (GCE) model. The formulation for the explicit spectral-bim microphysical processes is based on solving stochastic kinetic equations for the size distribution functions of water droplets (i.e., cloud droplets and raindrops), and several types of ice particles [i.e., pristine ice crystals (columnar and plate-like), snow (dendrites and aggregates), groupel and frozen drops/hall] Each type is described by a special size distribution function containing many categories (i.e., 33 bins). Atmospheric aerosols are also described using number density size-distribution functions.A spectral-bin microphysical model is very expensive from a computational point of view and has only been implemented into the 2D version of the GCE at the present time. The model is tested by studying the evolution of deep cloud systems in the west Pacific warm pool region and in the mid-latitude using identical thermodynamic conditions but with different concentrations of CCN: a low "clean" concentration and a high "dirty" concentration. Besides the initial differences in aerosol concentration, preliminary results indicate that the low CCN concentration case produces rainfall at the surface sooner than the high CCN case but has less cloud water mass aloft. Because the spectral-bim model explicitly calculates and allows for the examination of both the mass and number concentration of cpecies in each size category, a detailed analysis of the instantaneous size spectrum can be obtained for the two cases. It is shown that since the low CCN case produces fever droplets, larger size develop due to greater condencational and collectional growth, leading to a broader size spectrum in comparison to the high CCN case.

Tao, Wei-Kuo↗

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-Resolving Model Simulations

Cloud microphysics are inevitably affected by the smoke particle (CCN, cloud condensation nuclei) size distributions below the clouds. Therefore, size distributions parameterized as spectral bin microphysics are needed to explicitly study the effects of atmospheric aerosol concentration on cloud development, rainfall production, and rainfall rates for convective clouds. Recently, two detailed spectral-bin microphysical schemes were implemented into the Goddard Cumulus Ensemble (GCE) model. The formulation for the explicit spectral-bin microphysical processes is based on solving stochastic kinetic equations for the size distribution functions of water droplets (i.e., cloud droplets and raindrops), and several types of ice particles [i.e.,pristine ice crystals (columnar and plate-like), snow (dendrites and aggregates), graupel and frozen drops/hail]. Each type is described by a special size distribution function containing many categories (i.e. 33 bins). Atmospheric aerosols are also described using number density size-distribution functions.A spectral-bin microphysical model is very expensive from a from a computational point of view and has only been implemented into the 2D version of the GCE at the present time. The model is tested by studying the evolution of deep tropical clouds in the west Pacific warm pool region using identical thermodynamic conditions but with different concentrations of CCN: a low "clean" concentration and a high "dirty" concentration. Besides the initial differences in aerosol concentration, preliminary results indicate that the low CCN concentration case produces rainfall at the surface sooner than the high CCN case but has less cloud water mass aloft. Because the spectral-bin model explicitly calculates and allows for the examination of both the mass and number concentration of species in each size categor, a detailed analysis of the instantaneous size spectrum can be obtained for the two cases. It is shown that since the low CCN case produces fewer droplets, larger sized develop due to the greater condensational and collectional growth, leading to a broader size spectrum in comparison to the high CCN case.

Tao, Wei-Kuo↗

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-Resolving Model Simulations

Cloud microphysics is inevitably affected by the smoke particle (CCN, cloud condensation nuclei) size distributions below the clouds. Therefore, size distributions parameterized as spectral bin microphysics are needed to explicitly study the effects of atmospheric aerosol concentration on cloud development, rainfall production, and rainfall rates for convective clouds. Recently, two detailed spectral-bin microphysical schemes were implemented into the Goddard Cumulus Ensembel (GCE) model. The formulation for the explicit spectral-bin microphysical processes is based on solving stochastic kinetic equations for the size distribution functions of water droplets (i.e., cloud droplets and raindrops), and several types of ice particles [i.e. pristine ice crystals (columnar and plate-like), snow (dendrites and aggregates), graupel and frozen drops/hail]. Each type is described by a special size distribution function containing many categories (i.e. 33 bins). Atmospheric aerosols are also described using number density size distribution functions. A spectral-bin microphysical model is very expensive from a computational point of view and has only been implemented into the 2D version of the GCE at the present time. The model is tested by studying the evolution of deep tropical clouds in the west Pacific warm pool region and in the mid-latitude continent with different concentrations of CCN: a low "c1ean"concentration and a high "dirty" concentration. In addition, differences and similarities between bulk microphysics and spectral-bin microphysical schemes will be examined and discussed.

Tao, Wei-Kuo↗

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-Resolving Model Simulations

Cloud microphysics are inevitably affected by the smoke particle (CCN, cloud condensation nuclei) size distributions below the clouds. Therefore, size distributions parameterized as spectral bin microphysics are needed to explicitly study the effects of atmospheric aerosol concentration on cloud development, rainfall production, and rainfall rates for convective clouds. Recently, two detailed spectral-bin microphysical schemes were implemented into the Goddard Cumulus Ensemble (GCE) model. The formulation for the explicit spectral-bin microphysical processes is based on solving stochastic kinetic equations for the size distribution functions of water droplets (i.e., cloud droplets and raindrops), and several types of ice particles (i.e., pristine ice crystals (columnar and plate-like), snow (dendrites and aggregates), graupel and frozen drops/hail). Each type is described by a special size distribution function containing many categories (i.e. 33 bins). Atmospheric aerosols are also described using number density size-distribution functions. A spectral-bin microphysical model is very expensive from a computational point of view and has only been implemented into the 2D version of the GCE at the present time. The model is tested by studying the evolution of deep cloud systems in the west Pacific warm pool region, in the sub-tropics (Florida) and in the mid-latitude using identical thermodynamic conditions but with different concentrations of CCN: a low 'clean' concentration and a high 'dirty' concentration.

Tao, Wei-Kuo↗

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-Resolving Model Simulations

Cloud microphysics are inevitable affected by the smoke particle (CCN, cloud condensation nuclei) size distributions below the clouds, Therefore, size distributions parameterized as spectral bin microphysics are needed to explicitly study the effect of atmospheric aerosol concentration on cloud development, rainfall production, and rainfall rates for convective clouds. Recently, a detailed spectral-bin microphysical scheme was implemented into the the Goddard Cumulus Ensemble (GCE) model. The formulation for the explicit spectral-bim microphysical processes is based on solving stochastic kinetic equations for the size distribution functions of water droplets (i.e., cloud droplets and raindrops), and several types of ice particles [i.e., pristine ice crystals (columnar and plate-like), snow (dendrites and aggregates), graupel and frozen drops/hail]. Each type is described by a special size distribution function containing many categories (i.e., 33 bins). Atmospheric aerosols are also described using number density size-distribution functions.

Tao, Wei-Kuo↗

Simulating strongly correlated molecules with a superconducting quantum processor

Many of the biggest challenges in expanding the nation’s access to clean and low-cost energy resources are fundamentally chemistry or materials challenges. An important case is the development of new catalysts for the up-conversion of cheap and readily available materials such as methane or water into materials suitable for use as a fuel such as methanol or oxygen. To understand and exploit such processes, computer simulations of chemical reactions provide a natural complement to experimental studies. Unfortunately, most catalytic reactions involve so-called “strongly correlated” molecules which are notoriously difficult to study with simulation algorithms that can be executed on existing (classical) computers. The recent growth in quantum information science offers an alternative potential route for simulating these difficult systems. As a result, an increasing number of computational chemists are becoming interested in quantum computing. At the same time, quantum information scientists have identified chemistry simulation as a possible first demonstration of a quantum computer providing an improvement over a classical computer. The objective of this project is to accurately simulate strongly correlated molecules on a quantum processor. To meet the high challenges of this objective, new hybrid quantum/classical algorithms will be co-designed with advanced quantum gate developments and computed on customized quantum hardware. Some of the developed techniques will be transferable to study other molecular systems, while the project as a whole will help define better strategies for advancing the quantum simulation of matter more generally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-resolving Model Simulations

Cloud microphysics is inevitably affected by the smoke particle (CCN, cloud condensation nuclei) size distributions below the clouds. Therefore, size distributions parameterized as spectral bin microphysics are needed to explicitly study the effects of atmospheric aerosol concentration on cloud development, r d a U production, and rainfall rates for convective clouds. Recently, two detailed spectral-bin microphysical schemes were implemented into the Goddard Cumulus Ensembe1 (GCE) model. The formulation for the explicit spectral-bin microphysical processes is based on solving stochastic kinetic equations for the size distribution functions of water droplets (i.e., cloud droplets and raindrops), and several types of ice particles [i.e. pristine ice crystals (columnar and platelike), snow (dendrites and aggregates), graupel and frozen drops/hail]. Each type is described by a special size distribution function containing many categories (i.e. 33 bins). Atmospheric aerosols are also described using number density size-distribution functions. A spectral-bin microphysical model is very expensive from a computational point of view and has only been implemented into the 2D version of the GCE at the present time. The model is tested by studying the evolution of deep tropical clouds in the west Pacific warm pool region and in the mid-latitude continent with different concentrations of CCN: a low "c1ean"concentration and a high "dirty" concentration. In addition, differences and similarities between bulk microphysics and spectral-bin microphysical schemes will be examined and discussed.

Tao, Wei-Kuo↗

Evaluation of LANDSAT MSS vs TM simulated data for distinguishing hydrothermal alteration

The LANDSAT Follow-On (LFO) data was simulated to demonstrate the mineral exploration capability of this system for segregating different types of hydrothermal alteration and to compare this capability with that of the existing LANDSAT system. Multispectral data were acquired for several test sites with the Bendix 24-channel MSDS scanner. Contrast enhancements, band ratioing, and principal component transformations were used to process the simulated LFO data for analysis. For Red Mountain, Arizona, the LFO data allowed identification of silicified areas, not identifiable with LANDSAT 1 and 2 data. The improved LFO resolution allowed detection of small silicic outcrops and of a narrow silicified dike. For Cuprite - Ralston, Nevada, the LFO spectral bands allowed discrimination of argillic and opalized altered areas; these could not be spectrally discriminated using LANDSAT 1 and 2 data. Addition of data from the 1.3- and 2.2- micrometer regions allowed better discriminations of hydrothermal alteration types.

Abrams, M. J.↗

Coordinated Analysis of an Experimentally Space Weathered Carbonaceous Chondrite

The surfaces of airless bodies experience solar wind irradiation and micrometeorite impacts, a process collectively known as space weathering. These mechanisms alter the chemical composition, microstructure, and optical properties of surface materials and considerable work has been done to understand this phenomenon in lunar and ordinary chondritic materials. However, ongoing sample return missions Hayabusa2 to asteroid Ryugu and OSIRIS-REx to asteroid Bennu have prompted the need to study the effects of space weathering on hydrated, organic-rich materials, especially in the context of early results. Understanding space weathering of these samples is critical for properly interpreting remote sensing data during asteroid encounters, for sample site selection, and for the eventual study of returned samples. We can better understand space weathering of carbonaceous materials by simulating these processes in the laboratory. Recent experiments have shown that the changes in spectral characteristics of carbonaceous chondrites are not consistent among experiments, suggesting additional work is needed before these results can inform our understanding of spectral variations on asteroidal surfaces. Similarly, substantial work remains to characterize the chemical and microstructural effects of these processes in order to correlate these features with spectral changes. Here, we build on our previous work, presenting new results of the pulsed laser irradiation of the Murchison (CM2) meteorite to simulate micrometeorite impacts and the progressive space weathering of carbonaceous surfaces.

Thompson, M. S.↗

Auroral plasma transport processes in the presence of kV potential structures

We have simulated plasma transport processes in the presence of a quasi-two-dimensional current filament, that generated kV potential structure in the auroral region. The simulation consists of a set of one-dimensional flux tube simulations with different imposed time-dependent, field-aligned currents. The model uses the 16 moment system of equations and simultaneously solves coupled continuity and momentum equations and equations describing the transport along the magnetic field lines of parallel and perpendicular thermal energy and heat flows for each species. The lower end of the simulation is at an altitude of 800 km, in the collisional topside ionosphere, while the upper end is at 10 R(sub E) in the magnetosphere. The plasma consists of hot electrons and protons of magnetospheric origin and low-energy electrons, protons, and oxygen ions of ionospheric origin. The dynamical interaction of the individual current filaments with ionospheric and magnetospheric plasma generates a potential structure in the horizontal direction and kilovolt field-aligned potential drops along the field lines. The side-by-side display exhibits the evolution of the implied potential structure in the horizontial direction. In the presence of this potential structure and parallel electric field ionospheric plasma density is depleted and velocity is reduced, while density enhancement and increased velocity is observed in magnetospheric plasma. The ionospheric and magnetospheric electron temperatures increase below 2 R(sub E) due to magnetic mirror force on converging geomagnetic field lines. The primary cross-field motion produced by the horizontal E field (E x B drift) is perpendicular to both of the significant spatial directions and is thus ignorable in this geometry. The effects of other cross-field drift processes are discussed. The simulation thus provides insight into the dynamical evolution of two-dimensional potential structures driven by an imposed finite width, field-aligned current profile.

Ganguli, Supriya B.↗

Numerical Simulations of A Conceptual MSR-EES Shoulder Recession

The present study demonstrates our in-house material response solver, Icarus's capability to simulate the ablative conditions, including pyrolysis effects due to the interaction between hypersonic boundary layers and the thermal protection system (TPS). A conceptual aeroshell shoulder design, which undergoes mission-relevant flow and material conditions, is selected for the demonstration purpose. LAURA, a structured flow solver, is used to solve flow around the shoulder at several trajectory points of a flight path. The aerothermal dataset obtained from LAURA is used to enforce boundary conditions on the aeroshell wall to simulate ablation processes. The two-layered material system is stacked with HEEET (TPS) and Aluminum (actual material). A set of base parameters, such as the angle of material orientation with respect to the flow direction, convective heat-transfer co-efficient, and aerothermal boundary conditions on the rear end of the HEEET material layer, is selected to conduct a base-case simulation. A small amount of recession was observed, indicating that the design should be fine to go through the selected flow and material conditions. Furthermore, the parameters mentioned above are individually altered and are observed to affect the shoulder design's recession compared to the base case. Verification of our Icarus setup was also carried out using a one-dimensional grid and FIAT, a one-dimensional material-response solver, to build credibility for our results. As the current work is an uncoupled fluid-material-response simulation, a local sharp mesh deformation in the recessed surface near the shoulder corner is observed.

Prakash Shrestha↗

Characterizing How Meteorological Forcing Selection and Parameter Uncertainty Influence Community Land Model Version 5 Hydrological Applications in the United States

Despite the increasing use of large-scale Land Surface Models (LSMs) in predicting hydrological responses in extreme conditions, there's a critical gap in understanding the uncertainties in these predictions. This study addresses this gap through a detailed diagnostic evaluation of the uncertainties arising from meteorological forcing selection and model parametrization in hydrological simulations of the Community Land Model version 5 (CLM5). CLM5 is configured at a spatial scale of about 12-km to simulate runoff processes for 464 headwater watersheds, selected from the Catchment Attributes for Large-Sample Studies (CAMELS) dataset to be representative of physiographic and climatic gradients across the conterminous United States. For each watershed, CLM5 is driven by five commonly used gridded forcing datasets in combination with a large ensemble (> 1200) of key CLM5 hydrologic parameters. Our results suggest that uncertainty in CLM5 runoff simulations resulting from both forcing and parametric sources is markedly higher in arid regions, e.g., Great Plains and Midwest regions. Uncertainty in low flow is dominated by parametric uncertainty, while the selection of meteorological forcing contributes more dominantly to high flow and seasonal flows during fall and spring. Our analysis also demonstrates that the selection of forcing datasets and the metrics used to calibrate CLM5 significantly impact the model’s predictive accuracy in extreme event severity for both floods and droughts. Overall, the results from this study highlight the need to understand and account for forcing and parametric uncertainties in CLM5 simulations, particularly for hazard and risk assessments addressing hydrologic extremes.

54 ENVIRONMENTAL SCIENCES↗