Search NASA⌕ Search

SEARCH · Search NASA

Results for “Processing temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Evaluation of coated steels in supercritical CO 2

The carburizing supercritical CO 2 (sCO 2 ) environment limits the use of lower cost steels in the lower temperature (450–650°C) portions of the sCO 2 Brayton cycle because of concerns about internal carburization and embrittlement. Results on a ferritic–martensitic steel and conventional and advanced austenitic steels at 450–650°C in 30 MPa sCO 2 with and without 1% O 2 and 0.1% H 2 O additions have indicated that sCO 2 environments will have lower maximum operating temperatures compared to steam plants. Pack Al and Cr coatings were evaluated at 650°C on T91 and 316H substrates and showed some benefit for up to 2000 h at 650°C, especially without impurities. However, characterization indicated Al 2 O 3 was not formed and Cr-rich carbides formed in the Cr coatings. With the addition of impurities in the sCO 2 , the coatings were less protective at 650°C. Subsequent exposures at 600°C in sCO 2 showed similar behavior. Postexposure evaluations included measuring the bulk C content and room temperature tensile properties. Finally, improvements were indicated but the tensile results were complicated by the high temperature pack coating process affecting the substrate properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chemical structure and curing dynamics of bisphenol S, PEEK™-like, and resveratrol phthalonitrile thermoset resins

This effort provides a multifaceted analysis of the structural changes and material dynamics of thermally driven softening and curing of three distinct phthalonitrile (PN) resins that cross-link into thermally stable and oxidation-resistant thermosets. Although this material system has yielded a large subset of fire-retardant composites that require facile processing and low-temperature curing, to date, insufficient information had been available on the fundamental processes that drive their softening and curing stages. Our approach conducted a complementary analysis the chemistry, monomer mobility, and rheology of three PN polymers in order to correlate the curing processes with corresponding structural and behavioral transformations of thermosets. Here, we focused on PNs with a bisphenol S backbone, a bisphenol A (PEEK™-like) backbone, and a resveratrol backbone. We relied on quasi-elastic neutron scattering (QENS) in order to analyze the in situ dynamics and self-diffusion properties of PN monomers, and to track changes in their mobilities during cross-linking and staging. Our analysis facilitates proper control over the staging and final curing of these resins and enables more efficient processing of these thermosets.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spatially Enhanced Electrostatic Doping in Graphene Realized via Heterointerfacial Precipitated Metals

Forming heavily-doped regions in 2D materials, like graphene, is a steppingstone to the design of emergent devices and heterostructures. Here, a selective-area approach is presented to tune the work-function and carrier density in monolayer graphene by spatially synthesizing sub-monolayer gallium beneath the 2D-solid. The localized metallic gallium is formed via precipitation from an underlying diamond-like carbon (DLC) film that is spatially implanted with gallium-ions. By controlling the interfacial precipitation process with annealing temperature, spatially precise ambipolar tuning of the graphene work-function is achieved, and the tunning effect preserved upon cooling to ambient conditions. Consequently, charge carrier densities from ≈1.8 × 10 10 cm -2 (hole-doped) to ≈7 × 10 13 cm -2 (electron-doped) are realized, confirmed by in situ and ex situ measurements. The theoretical studies corroborated the role of gallium at the heterointerface on charge transfer and electrostatic doping of the graphene overlayer. Specifically, sub-monolayer gallium facilitates heavy n-doping in graphene. Extending this doping strategy to other implantable elements in DLC provides a new means of exploring the physics and chemistry of highly-doped 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Development of coal-derived carbon-based structural unit as a potential new building material

Coal combustion for energy has not only wasted the hydrogen-rich volatile matters but also results in CO 2 emission causing serious environmental issues. An integrated coal pyrolysis and solvent extraction process under elevated temperatures in an inert atmosphere is implemented to convert as-mined coal from Wyoming Powder River Basin to functional carbon elements such as pyrolysis char (PC). This paper presents the development and fabrication of new carbon-based structural unit (CSU) using pulverized PC and two coal-derived pitches (mesophase pitch and tar pitch) to attain high compressive strength greater than 30 MPa, low thermal conductivity less than 0.30 W/m.K, and low density less than 1.25 g/cm 3 . CSUs have the potential to overcome the current challenges with cement and concrete through pressurized fabrication followed by carbonization. This study aims to develop CSU with nearly 100% coal-derived carbon material for structural application in buildings. The effects of pressing pressures, carbonization temperatures, and binder contents on the density and mechanical and thermal properties of CSU samples are investigated. The study concludes that mesophase pitch produces a better performance of CSU samples, a combination of 100 MPa pressing pressure and carbonization temperature of 900 ⁰C yields the highest compressive strength, and a 25% MP content is recommended for low-cost CSU fabrication. Furthermoer, CSU has a much lower density, lower thermal conductivity, higher compressive strength, and higher strength-to-density ratio than normal concrete.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Aluminum/SmCo 5 composites for structural and magnetic applications

Metal-bonded magnetic composites (MBMCs) present a promising alternative to dense sintered magnets, particularly for intricate components. Compared to polymer-based bonded magnets, MBMCs have wider applicability in harsh environments. In this paper, we demonstrate a solid-state shear-based manufacturing technique to introduce localized magnetization into a paramagnetic aluminum matrix by embedding SmCo5 permanent magnet particles. Our magnetic composites display hard magnetic behavior with a coercivity of 13 kOe and a remanent magnetization of 4.32 emu/g. In addition to magnetization, we also report a 9% improvement in Young’s modulus. Despite the local temperature rise during processing, the magnetic phases didn’t decompose into unwanted phases, preserving the composite's hard magnetic properties. Creation of an interfacial metallurgical bond with the matrix ensured the suitability of the composites for structural applications. Our study investigates the mechanical, and functional properties of composites, paving the way for lightweight structural magnetic composites with a transformative potential in the aerospace, nuclear, and automotive applications. This work underscores the potential for further optimization and development to drive innovations in magnet and equipment design.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrochemically Grown Ultrathin Platinum Nanosheet Electrodes with Ultralow Loadings for Energy-Saving and Industrial-Level Hydrogen Evolution

Nanostructured catalyst-integrated electrodes with remarkably reduced catalyst loadings, high catalyst utilization and facile fabrication are urgently needed to enable cost-effective, green hydrogen production via proton exchange membrane electrolyzer cells (PEMECs). Herein, benefitting from a thin seeding layer, bottom-up grown ultrathin Pt nanosheets (Pt-NSs) were first deposited on thin Ti substrates for PEMECs via a fast, template- and surfactant-free electrochemical growth process at room temperature, showing highly uniform Pt surface coverage with ultralow loadings and vertically well-aligned nanosheet morphologies. Combined with an anode-only Nafion 117 catalyst-coated membrane (CCM), the Pt-NS electrode with an ultralow loading of 0.015 mg Pt cm -2 demonstrates superior cell performance to the commercial CCM (3.0 mg Pt cm -2 ), achieving 99.5% catalyst savings and more than 237-fold higher catalyst utilization. The remarkable performance with high catalyst utilization is mainly due to the vertically well-aligned ultrathin nanosheets with good surface coverage exposing abundant active sites for the electrochemical reaction. Overall, this study not only paves a new way for optimizing the catalyst uniformity and surface coverage with ultralow loadings but also provides new insights into nanostructured electrode design and facile fabrication for highly efficient and low-cost PEMECs and other energy storage/conversion devices.

42 ENGINEERING↗
DOE OSTI2022

Microwave-assisted ammonia synthesis over Cs-Ru/CeO 2 catalyst at ambient pressure: Effects of metal loading and support particle size

Industrially, ammonia is produced by Haber-Bosch process under high temperatures and pressures, consuming more than >2% of the world's energy production. This paper presents microwave-assisted catalytic synthesis of ammonia operated at atmospheric pressure and temperatures from 260 to 360 °C. A Cs-promoted Ru catalyst supported on cerium oxide with different metal loading (4–24 wt% Ru) and support particle size (25nm, 50nm and 5μm) was investigated. The small size cerium oxide support resulted in the highest activity while the large cerium oxide support was less favorable, leading to lower activity associated to large Ru particle size and lower dispersion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Experimental and numerical study of the effects of solution concentration and temperature on concrete under external sulfate attack

The work reports on an experimental programme, conducted to validate comprehensively our previously proposed coupled chemo-transport model for external sulfate attack on concrete. Specifically, the effects of the concentration of sulfate solution and temperature on the distribution of sulfate ions in concrete are experimentally investigated and used to demonstrate the accuracy of the modeling framework. Further, the profile of aluminate depletion and the leaching depth numerically are investigated. For all cases the model predictions are in good agreement with the experimental results, showing increases of the concentration of sulfate ions in concrete with higher concentrations of sulfate solution and higher temperatures. It is concluded that higher sulfate solution concentration and temperature enhance the processes involved in the external sulfate attack on concrete, namely diffusion of sulfate ions and their chemical reactions with concrete. It is found that these parameters affect the external sulfate attack predominantly via the chemical reaction process.

36 MATERIALS SCIENCE↗
DOE OSTI2020

In-situ measurement of irradiation behavior in LiNbO 3

In-situ measurement of LiNbO 3 based surface acoustic wave (SAW) crystal resonator device under irradiation was demonstrated and used to characterize the impact of radiation on physical properties of this material. The resonant frequency of the SAW device was monitored as the output power of the reactor was varied. Upon step increase of the reactor power, a gradual shift in the device’s resonant frequency was observed. This frequency shift initially exhibits a linear growth and eventually reaches an equilibrium value proportional to the reactor power. The observed behavior can be attributed to two competing processes: increase of temperature due to gamma heating or accumulation of irradiation induced defects. In both cases, the response is attributed to changes in the physical properties of LiNbO 3 , particularly the elastic constants. This demonstrated ability to measure materials properties under irradiation is attractive for development of sensors and performing materials science under irradiation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

A modeling study of ocean thermal energy conversion resource and potential environmental effects around Kailua-Kona, Hawaii

Ocean Thermal Energy Conversion (OTEC) offers a promising renewable energy solution through a heat exchange process using the temperature difference between warm surface seawater and cold deep seawater. Because accurate resource characterization is critical for the optimal design and implementation of OTEC systems, a high-resolution numerical model is employed to better characterize the OTEC resource at Kona, Hawaii. Our model provides detailed spatial and temporal variability of the thermal gradient, which is essential for assessing the viability and efficiency of OTEC systems. The model results reveal distinct patterns and dynamics not captured by existing observations or models (e.g., lower-resolution information). These findings highlight the importance of using high-resolution models for accurate predictions of thermal gradient variability, ultimately supporting more efficient and sustainable OTEC deployment. Additionally, the study investigates the impacts of mixed water discharge from OTEC plants that can cause shock to organisms living in the surface water and potentially destabilize the water column. Understanding these effects is vital for minimizing any potential negative environmental consequences and ensuring the long-term viability of OTEC operations. Further, our model improves OTEC resource characterization, which can lead to optimal design and deployment of OTEC systems. The analysis of OTEC water discharge impacts can accelerate the development of OTEC technologies, overcoming permitting/consenting challenges. These findings contribute to the broader adoption of high-resolution modeling in ocean energy resource characterization, particularly for OTEC applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Contemporary sources dominate carbonaceous aerosol on the North Slope of Alaska

As the Arctic continues to change and warm rapidly, it is increasingly important to understand the organic carbon (OC) contribution to Arctic aerosol. Biogenic sources of primary and secondary OC in the Arctic will be impacted by climate change, including warming temperatures and earlier snow and ice melt. Here, this study focuses on identifying potential sources and regional influences on the seasonal concentration of organic aerosol through analysis of chemical and isotopic composition. Aerosol samples were collected at two sites on the North Slope of Alaska ($Utqia\dot{g}vik$, UQK, and Oliktok Point, OLK, which is in an Arctic oilfield) over three summers from 2015 to 2017. The elemental carbon (EC) trends at each site were used to understand local combustion influences. Local sources drove EC concentrations at Oliktok Point, where high EC was attributed to oil and gas extraction activity, including diesel combustion emissions. $Utqia\dot{g}vik$ had very low EC in the summer. OC was more similar in concentration and well correlated between the two sites with high contributions of contemporary carbon by radiocarbon apportionment (UQK = 74%, OLK = 63%), which could include both marine and terrestrial sources of contemporary carbon (e.g. primary and secondary biogenic, biomass burning and/or associated SOA, and bioaerosols). OC concentrations are strongly correlated to maximum ambient temperatures on the NSA during the summer, which may have implications for predicting future OC aerosol concentrations in a warming Arctic. Biomass burning was determined to be an episodic influence at both sites, based on interpretation of combined aerosol composition, air mass trajectories, and remote sensing of smoke plumes. The results from this study overall strongly suggests contribution from regional sources of contemporary organic aerosol on the NSA, but additional analysis is needed to better constrain contributions from both biogenic sources (terrestrial and/or marine) and bioaerosol to better understand temperature-related aerosol processes in the Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Copper iodide nanoparticles as a hole transport layer to CdTe photovoltaics: 5.5 % efficient back-illuminated bifacial CdTe solar cells

We report the role of copper iodide (CuI) nanoparticles (NPs) as a hole transport layer (HTL) in cadmium sulfide/cadmium telluride (CdS/CdTe) photovoltaics. These CuI NPs were prepared using solution processing at room temperature and used to fabricate monofacial and bifacial CdTe solar cells with different back contacts. Using CuI/Au as the back contact, the device efficiency reached to 14.8% with outstanding fill factor (FF) of 79.2%. Replacing the gold (Au) electrode with sputtered transparent indium tin oxide (ITO), a CuI/ITO back contact yielded photoconversion efficiencies (PCEs) of 11.6% and 5.5% under front and back illumination respectively. Bifacial devices (CdTe/ITO) without the CuI NP HTL have an efficiency of 7.0% and 1.0% for front and back illumination, respectively. For CuI/ITO, a current collection of 12.0 mAcm -2 was observed upon back illumination which significantly improved over an ITO-only back contact (5.0 mAcm -2 ). The PCE obtained from back illumination was enhanced when using CuI NPs as the HTL due to the reduced back barrier height, and improved back interface as determined by temperature dependent current vs. voltage characteristics and impedance spectroscopy analysis. The improvement in device performance of the bifacial configuration is a significant step forward toward realizing thin film photovoltaic modules which harvest energy incident on the rear of the module.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tailored glycolysis of Nylon 6 to enable upcycling into high-strength adhesives

Nylon is a high-strength polyamide widely used in automotive, textiles, packaging, etc. However, its durability makes nylon waste difficult to manage, with recycling limited to mechanical grinding to make fillers. Here, we report a catalytic glycolysis approach to deconstruct Nylon 6 into controlled-length oligomers, enabling upcycling into value-added materials. A low-molecular-weight oligomer (M n = 1.8 kg/mol) was repolymerized with diepoxy-terminated poly(bisphenol A-co-epichlorohydrin) via mechanochemistry to create a high-performance adhesive. This copolymer achieves lap shear strengths over 22 MPa on steel and bonds steel to carbon fiber composites, nearly tripling the performance of commercial adhesives even at 90°C. Thermomechanical analyses show that the adhesive retains thermal stability similar to nylon 6 but melts at lower temperatures, allowing easier processing. The material can be reprocessed and reused without significant performance loss. This study demonstrates a strategy to convert nylon 6 waste into valuable materials, offering a sustainable path for difficult-to-recycle plastics.

Nylon waste↗
DOE OSTI2023

Low-Temperature Gas-Phase Formation of Methanimine (CH 2 NH; X 1 A')–the Simplest Imine–under Single-Collision Conditions

The D1-methanimine molecule (CHDNH; X 1 A') – the simplest (deuterated) imine – has been prepared through the elementary reaction of the D1-methylidyne (CD; X 2 Π) with ammonia (NH 3 ; X 1 A 1 ) under single collision conditions. As a highly reactive species with a carbon-nitrogen double bond and a key building block of biomolecules like amino acids and nucleobases, methanimine is of particular significance in coupling the nitrogen and carbon chemistries in the interstellar medium and in hydrocarbon-rich atmospheres of planets and their moons. However, the underlying formation mechanisms of methanimine in these extreme environments are still elusive. Here, the directed, low-temperature gas-phase formation of D1-methanimine will deepen our fundamental understanding of low-temperature molecular growths processes via carbon-nitrogen bond coupling. Considering the recent detection of the interstellar D1-methylidyne radical, the investigation of the CD–NH 3 system also suggests a promising pathway for future astronomical observations of D1-methanimine as a molecular tracer of gas phase deuterium-enrichment in deep space.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Binding the Power of Cycloaddition and Cross-Coupling in a Single Mechanism: An Unexpected Bending Journey to Radical Chemistry of Butadiynyl with Conjugated Dienes

What if an experiment could combine the power of cycloaddition and cross-coupling with the in situ formation of an aromatic molecule in a single collision? Crossed molecular beam experiments augmented with electronic structure and statistical calculations provided compelling evidence on a novel radical route involving 1,3-butadiynyl (HCCCC; X 2 Σ + ) radicals synthesizing (substituted) arylacetylenes in the gas phase upon reactions with 1,3-butadiene (CH 2 CHCHCH 2 ; X 1 Ag) and 2-methyl-1,3-butadiene (isoprene; CH 2 C(CH 3 )CHCH 2 ; X 1 A'). Furthermore, this elegant mechanism de facto merges two previously disconnected concepts of cross-coupling and cycloaddition–aromatization in a single collision event via the formation of two new C(sp 2 )–C(sp 2 ) bonds and bending the 180° moiety of the linear 1,3-butadiynyl radical out of the ordinary by 60° to 120°. In addition to its importance to fundamental organic chemistry, this unconventional mechanism links two previously separated routes of gas-phase molecular mass growth processes of polyacetylenes and polycyclic aromatic hydrocarbons (PAHs), respectively, in low-temperature environments such as in cold molecular clouds like the Taurus Molecular Cloud (TMC-1) and in hydrocarbon-rich atmospheres of planets and their moons such as Titan, what revises the established understanding of low-temperature molecular mass growth processes in the Universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Mechanistic Insights for Plasma-Catalytic CO 2 Reduction over TiO 2 in a Dielectric Barrier Discharge Reactor

Reaction kinetics experiments coupled with phenomenological kinetic modeling and parameter estimation are used to elicit insights into the mechanism and active sites for the plasma-catalytic dissociation of CO 2 on TiO 2 . Experimental and model insights showed that gas-phase reactions contribute at least two-thirds of the overall product formation at explored conditions; weak temperature dependence, strong sensitivity to specific energy input (SEI), apparent first order in CO 2 , and positive influence of cofed argon (Ar) and oxygen (O 2 ) for the gas-phase contributions all suggest that expected plasma reaction steps such as electron-impact and high-energy collisions are the dominant modes for CO 2 dissociation. The Arrhenius-like expression for gas contributions resulted in a preexponential of 4.40 × 10 –3 s –1 , an E SEI,g of 7.90 × 10 –4 mol/kJ, and an E a,g of 1.00 × 10 –3 J/mol. For surface contributions, the small apparent barrier of 16.3 kJ/mol, relatively weaker dependence on SEI, first-order dependence on CO 2 , and insensitivity to cofed Ar and O 2 all point to CO 2 dissociation on TiO 2 surface facets without vacancies and aided by plasma (leading to vibrationally excited CO 2 and/or a reactive surface with significant surface charge accumulation). The Arrhenius-like expression resulted in a preexponential of 7.81 × 10 –2 s –1 , an E SEI,s of 1.90 × 10 –3 mol/kJ, and an E a,s of 1.63 × 10 4 J/mol. The derived kinetic model further enabled a systematic evaluation of the effect of inputs (plasma power, flow rate, CO 2 inlet concentration, and temperature) to identify process trends and optimal operating conditions.

catalyst↗
DOE OSTI2025

Molecular Insights into Geochemical Reactions of Iron-Bearing Minerals: Implications for Hydrogen Geo-Storage

Here, this study investigates the reaction of hydrogen (H 2 ) with pyrite (FeS 2 ), focusing on how temperature and the presence of water influence the reaction pathways and kinetics. Utilizing computational molecular simulations and kinetic analyses, we explore the impact of these factors on the formation of hydrogen sulfide (H 2 S) and related species. First, grand canonical Monte Carlo/molecular dynamics (GCMC/MD) simulations reveal that physical H 2 adsorption occurs in distinct layers on the pyrite surface. In addition, increased temperatures reduce the absolute adsorption capacities. Reactive MD simulations demonstrate that H 2 interacts differently with pyrite under varying conditions. At 298 K, H 2 reacts with pyrite to form HS – , leading to the formation of HS – through covalent bonding with sulfur of pyrite. However, no H 2 S is produced at this temperature, suggesting that a kinetic barrier (i.e., activation energy) may prevent this reaction. At higher temperatures, H 2 S production significantly increases. The presence of water introduces additional complexity to the reaction mechanism. Unlike dry conditions, water enhances H 2 S generation, even at low temperatures. Water also facilitates the formation of additional products, such as SOH, indicating a more intricate chemical environment on the pyrite surface. Our findings identify the association of HS – ions to form H 2 S as the rate-limiting step, with temperature influencing this process. This finding suggests that while the presence of water can create a more dynamic reaction environment, the overall mechanisms leading to H 2 S formation remain consistent. These outcomes suggest the need for developing targeted strategies to manage and control H 2 S emissions within the context of underground hydrogen storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Corundum Discovered by SuperCam and the Perseverance Rover at Jezero Crater, Mars

Minerals provide clues to the type of geologic environments in which they form. The primary types of minerals that have been identified on Mars indicate a history dominated by volcanism followed by interaction with water. However, other minerals are sometimes found. Here we present results from the SuperCam instrument on the Perseverance rover in which the mineral corundum (α-Al2O3) has been identified using a technique called time-resolved luminescence spectroscopy. Corundum has a unique light-emitting (luminescence) feature based on two well-known peaks as well as the time it takes for this light to fade after being excited by a laser, which is referred to as the lifetime. Corundum forms in specific environments that are enriched in aluminum and depleted in silicon and have been subjected to high temperature and pressure. Such places include deep subsurface magmas or shallower locations that have been exposed to high temperature through tectonic processes or meteorite impacts. Given their small size, association with a mineral called plagioclase, and location on the heavily impacted crater rim, we propose that these corundum minerals formed through impact processes.

58 GEOSCIENCES↗