Search NASA⌕ Search

SEARCH · Search NASA

Results for “Proton acceleration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Advanced Material Studies for High Intensity Proton Production Targets and Windows

The titanium alloy Ti6Al4V is widely used in accelerator facilities as beam windows, which are exposed to high cycle compressive stress waves from intense pulsed proton beams. Such materials interacting with the beam are subject to various forms of radiation damage, which can adversely affect their endurance limit. However, no fatigue data is currently available for high energy proton irradiated titanium alloy. Due to limitations in proton irradiation facilities, only miniature flat samples can be used for irradiation. To address this issue, we have developed a custom-made bend fatigue tester at Fermilab specifically for testing proton irradiated titanium alloy. In this presentation, we report on the fatigue test results obtained from this custom-fatigue tester using a non-ASTM standard specimen design. We plan to validate these sparse fatigue data with ASTM standard samples using standard fatigue samples. Furthermore, we have modified another commercial bend fatigue tester to accommodate miniature samples, and discuss some inherent deficiencies of the commercial fatigue tester to test miniature samples. To overcome this issue, a new fixture design is presented, which enables satisfactory fatigue testing on miniature samples over long periods. Finally, we present an upgrade to the custom-fatigue tester, featuring this new fixture design.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Final Cooling with Thick Wedges for a Muon Collider

A muon collider is a particle accelerator that collides muons rather than protons or electrons. An important component of such a collider is cooling, in which the emittance of the muon beam is reduced to make it suitable for use in a collider. In the last stage of this process, called final 4D cooling, emittance in the transverse axes is reduced while emittance in the longitudinal axis is allowed to grow. In previous studies, Final 4-D cooling used absorbers within very high field solenoids to cool low-momentum muons. Simulations of the systems did not reach the desired cooling design goals. In this study, we develop and optimize a different conceptual design for the final 4D cooling channel, which is based on single thick wedges. We used G4Beamline to simulate the channel and Python to generate and analyze particle distributions. We characterized the effects of various parameters on the performance of this system, including the initial emittances and Twiss parameters, the length and angle of the wedges, the length of the drift channel, and the length, frequency, gradient, and phase of the RF cavities. We optimized the design parameters of the cooling channel and produced two conceptual designs (corresponding to two possible starting points for the input beam) which achieve transverse cooling in both x and y by a factor of ≈ 3.5. These channels achieve a lower transverse and longitudinal emittance than the best design previously published.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Improving Longitudinal Impedance of Inductive Inserts

In this article, we discuss methods for improving the longitudinal impedance of inductive inserts used for space charge compensation in the proton storage ring (PSR) at Los Alamos Neutron Science Center (LANSCE) Facility. The PSR relies on inductive inserts to counteract the capacitive impedance produced by the space charge of the proton beam, which can otherwise lead to beam debunching. Existing inductive inserts, which utilize Toshiba M4C21A ferrite, have been effective but require heating to reduce resistive components that can cause instabilities at higher frequencies. This article explores the potential of alternative ferrite materials, specifically National Magnetics C2050, to enhance the performance of these inserts by reducing the need for heating and minimizing resistive impedance. Through both analytical modeling and CST Particle Studio simulations, it is demonstrated that optimized ferrite materials and geometries can significantly improve space charge compensation while mitigating instability risks, ultimately enhancing the performance of the PSR.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Laser-driven collisionless shock acceleration of ions from near-critical plasmas

Here, this paper overviews experimental and numerical results on acceleration of narrow energy spread ion beams by an electrostatic collisionless shockwave driven by 1 μm (Omega EP) and 10 μm (UCLA Neptune Laboratory) lasers in near critical density CH and He plasmas, respectively. Shock waves in CH targets produced high-energy ~50 MeV protons (ΔE/E of ≤30%) and 314 MeV C 6+ ions (ΔE/E of ≤10%). Observation of acceleration of both protons and carbon ions to similar velocities is consistent with reflection of particles off the moving potential of a shock front. For shocks driven by CO 2 laser in a gas jet, ~30 MeV peak in He ion spectrum was detected. Particle-in-cell simulations indicate that regardless of the target further control over its density profile is needed for optimization of accelerated ion beams in part of energy spread, yield and maximum kinetic energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

A profile monitor for proton radiography experiments at the Los Alamos Neutron Science Center

The Proton Radiography (pRad) facility at the Los Alamos Neutron Science Center utilizes pulses of protons delivered by the 800 MeV linear accelerator to produce a series of radiographic images to study the dynamic behavior of materials under extreme conditions. Radiographs taken with an empty field of view, or beam pictures, are used to normalize transmission. However, because the center of the proton beam shifts between pulses, an in situ method for measuring beam position is required to normalize images for beam movement to perform absolute radiography. The beam profile monitor described here uses an array of scintillating fibers positioned in the beam path to produce light proportional to beam intensity across the beam cross section. This light is detected using fast photodiodes and a digital oscilloscope, providing a response time of several nanoseconds—suitable for measuring the 50-ns proton pulses used in pRad. The profile monitor achieves a measured position precision of 40 μm and an intensity precision of 0.7%, allowing for beam movement corrections to be applied to images, thereby improving data accuracy and image quality.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Laser-ion acceleration using mixed compositions: Tailoring the target for each species

Particle-in-cell simulations of laser- ion acceleration demonstrate marked discrepancies in the acceleration experienced by the different ion species in complex target compositions, especially when the target becomes relativistically transparent to the pulse during irradiation. Beginning with proton contaminants in a carbon target, we show how the higher charge-to-mass ratio of the protons results in species stratification and late-time suppression of the carbon acceleration. The target normal sheath acceleration (TNSA) primarily experienced by the protons can be exploited to mitigate this tamping by using a shaped rear surface of the target, leaving the break-out afterburner-driven carbons to accelerate close to the laser axis and then experience less tamping during a late-time TNSA phase. Here, we then explore preferentially accelerating the lighter species in a mixed composition target, particularly focusing on deuteron beam applications. We examine three different target compositions with the same areal electron density, CD 2 , CH 2 , and 7 LiD, and propose an alternative shaping of the rear surface of 7 LiD to increase the number of high-energy deuterons in the beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1981

On the injection and scattering of protons in Jupiter's magnetosphere

The interaction, scattering, and acceleration of Jovian ions through magnetohydrodynamic waves are investigated. A model of the Alfven speed in the plasma sheet for both inbound and outbound legs of the Voyager 1 encounter is presented, and underlying assumptions are discussed. Theoretical ingredients of a rotationally driven Jovian substorm are defined, and the convective growth rate of the fast wave for both a warm and a cold beam is derived. The mean-free path for scattering based on in situ measurements of magnetic fluctuations in the plasma sheet is estimated, and the results indicate that scattering of super-Alfvenic ions occurs on a regular basis throughout the plasma sheet, and the observed level of magnetic fluctuations is sufficiently high to stop ionospheric protons.

Barbosa, D. D.↗
DOE OSTI2023

Ionomer-free nanoporous iridium nanosheet electrodes with boosted performance and catalyst utilization for high-efficiency water electrolyzers

Increasing the catalyst utilization efficiency and simplifying electrode fabrication processes are crucial to accelerate development of low-cost proton exchange membrane electrolyzer cells (PEMECs). Here, we develop a facile route to fabricate ionomer-free iridium nanosheet integrated electrodes, in which nanoporous iridium nanosheets (IrNS) with abundant exposed edges and nanopores are deposited on thin titanium liquid/gas diffusion layers (TT-LGDLs) via a low-temperature chemical synthesis strategy. Further, benefiting from high catalytic activity, good electrode conductivity and excellent liquid/gas transport properties, such nanoporous IrNS electrodes with low catalyst loadings require low cell voltages of 1.65 V and 1.78 V at 3000 and 6000 mA/cm 2 , respectively. More impressively, a stable performance can be well maintained under extremely high current density tests of 5000 mA/cm 2 , demonstrating the potential of low-loading nanoporous IrNS electrodes in solid-electrolyte based electrochemical conversion cells that require high current density operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Extraction chromatography of 225 Ac and lanthanides on N,N-dioctyldiglycolamic acid /1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide solvent impregnated resin

The alpha-emitter 225 Ac (t 1/2 = 9.92 d) is currently under development for targeted alpha-particle therapy of cancer, and accelerator production of 225 Ac via proton irradiation of thorium targets requires robust separations of 225 Ac from chemically similar fission product lanthanides. Additionally, the lanthanide elements represent critical components in modern technologies, and radiolanthanides such as 140 Nd (t 1/2 = 3.37 d) also have potential application in the field of nuclear medicine. The ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim][NTf 2 ]), combined with the diglycolamide extractant, N,N-dioctyldiglycolamic acid (DODGAA), was adsorbed on macroporous resin support to produce a solvent impregnated resin (SIR) that was investigated for separations of 225 Ac and lanthanides. The equilibrium distribution coefficients (Kd) of the rare earth elements (Sc(III), Y(III), Ln(III)), 225 Ac(III), Th(IV), and U(VI) on the prepared DODGAA/[Bmim][NTf 2 ]-SIR were determined from batch adsorption experiments in HCl and HNO 3 media. The DODGAA/[Bmim][NTf2]-SIR exhibited preferential uptake of the heavier lanthanide elements while allowing for the separation of the lighter lanthanides. Column separations utilizing the DODGAA/[Bmim][NTf 2 ]-SIR were effective at separating the lighter lanthanides from each other, and separating 225 Ac from a mixture of lanthanides, 213 Bi, and 225 Ra without the need for additional complexing agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Measurements of a 2.1 MeV H− beam with an Allison scanner

Transverse 2D phase space distributions of a 2.1 MeV, 5 mA H− beam are measured at the Proton Improvement Plan II Injector Test accelerator at Fermilab with an Allison scanner. This paper describes the design, calibration, and performance of the scanner along with the main results from beam measurements. Analyses of the recorded phase portraits are performed primarily in action-phase coordinates. The stability of the action under linear optics makes it easier to compare measurements taken under different beamline conditions. The amplitude of a single measured point (“pixel”) is proportional to the phase density in the corresponding portion of the beam. When the Twiss parameters are calculated using only the high-phase density part of the beam, the pixel amplitude in the beam core is found to be decreasing approximately exponentially with action and to be phase-independent. Outside of the core, the amplitudes decrease with action at a slower rate than in the core. This “tail” comprises 10%–30% of the beam, with 0.1% of the total measured intensity extending beyond action 10–20 times larger than the rms emittance. The transition from the core to the tail is accompanied by the appearance of two “branches” that are separated in phase and extend beyond the core. A set of selected measurements shows that there is no measurable emittance dilution along the beamline; the beam parameters are practically constant over a 0.5 ms pulse; and scraping in various parts of the beamline is an effective way to decrease the transverse tails by removing the branches.

Richard, C. (ORCID:000000029891135X)↗
DOE OSTI2026

Probing the 𝑗 dependence of angular distributions and 𝑁=20 shell rigidity via the 36 S (𝑝,𝑑) 35 S reaction

An investigation of the N=20 36 S nucleus has been performed through a detailed study of the 3 6S (p,d)3 5S neutron-removal reaction, employing a 66-MeV proton beam at iThemba Laboratory for Accelerator Based Sciences and an innovative target design. Using the high-resolution K = 600 magnetic spectrometer, 98 states in 3 5S were identified up to 16-MeV excitation energy, including 47 previously unobserved states. Angular distributions and spectroscopic factors, including isobaric analog-state contributions, were extracted for 81 levels. A pronounced j dependence in the angular distributions of ℓ=2 states provides refined insights into the spin-orbit splitting. Finite-range adiabatic distorted-wave approximation calculations qualitatively reproduce the observed j dependence. Comparisons of the measured 1d 5/2 spectroscopic strength distribution with large-scale shell-model and ab initio calculations show good agreement overall, and the robustness of the N=20 shell closure in 36 S is confirmed when comparing the relatively low fp orbital occupancies in 40 Ca and 3 6S across the Fermi surface. This study underscores the utility of neutron-removal reactions in probing nuclear structure and the Fermi surface of sd nuclei and beyond. The findings advance our understanding of shell evolution and offer constraining data for theoretical models.

20 ≤ A ≤ 38↗
DOE OSTI2021

Electron Cooling With Space-Charge Dominated Proton Beams at IOTA

We describe a new electron cooler being developed for 2.5 MeV protons at the Integrable Optics Test Accelerator (IOTA), which is a highly re-configurable storage ring at Fermilab. This system would enable the study of magnetized electron cooling in the presence of intense space-charge with transverse tune shifts approaching -0.5 as well as highly non-linear focusing optics in the IOTA ring. We present an overview of the design, simulations and hardware to be used for this project.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Proposal for a Fusion Prototype Neutron Source at the Los Alamos Neutron Science Center

This study evaluates a target station at the Los Alamos Neutron Science Center dedicated to the mission of irradiating structural materials in an environment that is nearly prototypic of the radiation environment experienced by the first wall of a magnetically-confined fusion reactor burning D-T fuel. Such a station could be located in the existing Area A experimental hall and be driven by an 800-MeV, 1-MW proton beam delivered by the LANSCE accelerator. A neutronics assessment of a target concept shows it satisfies all of the key parameter guidelines stated in the Summary Report on the Fusion Prototypic Neutron Source Workshop.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Incoherent Dynamics of Intense Proton Beams under Electron Cooling

The minimum emittance of ion beams achieved using electron cooling is limited by the heating processes of Intra Beam Scattering and diffusion driven by resonance crossing of particles due to space-charge. We describe a new experiment to explore the intense space-charge regime with a transverse tune shift approaching -0.5 using 2.5~MeV protons at the Integrable Optics Test Accelerator (IOTA) at Fermilab. We also report on the results from PyORBIT simulations incorporating transverse space-charge and electron cooling with emphasis on the incoherent dynamics of the particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

SpinQuest in 10 Minutes

The SpinQuest experiment at Fermi National Accelerator Laboratory uses a 120 GeV proton beam from the Main Injector, incident upon transversely polarized protons and deuterons using $NH_3$ and $ND_3$ targets, respectively. SpinQuest will perform the first measurement of the Sivers asymmetry in Drell-Yan \(pp\) and \(pd\) scattering from sea quarks, thereby contributing to the world data to extract the Sivers function for the light sea quarks. This function describes the correlation between the momentum direction of the struck quark and the spin of its parent nucleon. A non-vanishing Sivers function for the sea quarks is evidence that there is sea quark orbital angular momentum (OAM). There are additional opportunities to study transverse-spin effects with the SpinQuest experiment, particularly the transverse single-spin asymmetry (TSSA) in \( J/\psi \) production. An update on the current status and progress of the experiment will be given.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Beam Non-Uniformity Characterization at the SpinQuest and DarkQuest Experiments

The SpinQuest experiment, including upgrades to SpinQuest designed to increase sensitivity to dark sector searches (commonly known as DarkQuest), utilizes the high-intensity 120 GeV proton beam delivered by the Fermilab Accelerator Complex to probe the inner structure of nucleons and search for new physics beyond the Standard Model. The SpinQuest beam is extracted from the Main Injector synchrotron at Fermilab in what is known as a slow spill . The slow spill involves a complex non-linear half-integer extraction method, which results in non-uniform beam behavior. SpinQuest observes spikes of very high intensity beam which can saturate detectors and reduce trigger efficiency, significantly impacting the experiment's sensitivity. In this project we address this challenge by developing an analysis framework to characterize the beam delivered to SpinQuest. By discovering trends within each spill and by comparing thousands of spills, we can better inform the Accelerator Division and improve the slow spill extraction. We have also begun a collaboration with the Accelerator Division in order to simulate the slow spill and improve the magnet ramp process controls which will improve the uniformity of the beam. These improvements will directly enhance the physics reach of SpinQuest/DarkQuest, increasing their sensitivity to key measurements such as the Sivers function and searches for new physics.

Dolen, James William [Purdue U., Calumet] (ORCID:0↗
DOE OSTI2026

An Iterative Machine Learning Framework for Event Classification and Monte Carlo Tuning in SpinQuest

The E1039/SpinQuest experiment at Fermi National Accelerator Laboratory uses a 120~GeV proton beam from the Main Injector incident on transversely polarized proton and deuteron targets, using $NH_3$ and $ND_3$, respectively. In addition to measuring the Sivers asymmetry in Drell--Yan $pp$ and $pd$ scattering from sea quarks, SpinQuest will study transverse-spin effects, particularly the transverse single-spin asymmetry (TSSA) in $J/\psi$ production. The angular distributions from the $J/\psi$ decay could play an important role in understanding the gluon contribution to the proton spin structure. However, before extracting these angular distributions, it is necessary to isolate signal events originating from the target from events produced by other sources and from the combinatorial background. To effectively and accurately classify the target events, it is important to ensure that the simulated events are properly tuned to the experimental physics channels. We have introduced an iterative technique to match simulated and experimental events and to classify the physics channels using deep neural networks and a generative model based on normalizing flows.

Hossain, Forhad [Virginia U. (main)] (ORCID:000000↗
NASA NTRS1981

Abundance enhancements in cosmic rays produced by collisionless shocks

It is shown that shocks preferentially accelerate partially ionized heavy elements over protons. Within the framework of a previously published model of injection, the spectra of different ion species are calculated from thermal to ultrarelativistic energies. For typical astrophysical parameters, the predicted enhancement is in qualitative agreement with observations for a 10 to the 6th K preshock plasma; ions with Z greater than 10 are enhanced by about an order of magnitude or so. The continuing increase with energy of the heavy-element abundances into the air-shower regime is discussed.

Eichler, D.↗